Search Results (61)

Background and Objectives: The anesthetic nerve block test is a surgical technique that can assist in the differential diagnosis of forefoot pain. The MTP joint, enclosed by its capsule, may act as a sealed cavity with predictable contrast dispersion, whereas the IM space, lacking clear boundaries and containing bursae and the plantar digital nerve, favors diffuse spread. Due to the high rate of false positives in suspected cases of Morton’s neuroma with the anesthetic block current procedure in the intermetatarsal space, the aim of this study was to propose an alternative to the current procedure. Material and Methods: Six fresh cadaveric feet were used. Under ultrasound guidance, the 2nd–4th MTP joints received stepwise intra-articular injections of radiopaque contrast. The third common digital nerve was injected within the third intermetatarsal space. Standard radiographs were obtained to assess distribution and proximal spread. Results: A volume of 0.3 mL was sufficient to fully reach the intra-articular cavity and potentially induce effective localized anesthesia. When the third common digital plantar nerve was injected in an anatomically healthy region, the contrast medium showed a proximal diffusion pattern extending up to the mid-diaphyseal level of the third and fourth metatarsal bones. On radiographs, the intra-articular infiltration lines appear sharply demarcated, supporting the interpretation of the metatarsophalangeal joint as a sealed compartment. Conclusions: Low intra-articular anesthetic volumes may yield targeted effects, while Morton’s neuroma injections spread proximally, risking loss of diagnostic specificity; this technique may improve decision-making accuracy and reduce failures. Full article

Background: The morphology of implant threads plays a crucial role in achieving primary stability, which is essential for successful osseointegration and immediate loading of dental implants. This study aimed to evaluate how different implant thread pitches and an under-preparation drilling technique impact primary stability using an in vitro model. Methods: The study was conducted on low-density polyurethane bone models with and without cortical layers. The following three different implant thread profiles were tested: CYROTH 0.40 (0.40 mm), CYROTH 0.45 (0.45 mm), and CYROTH T (0.35 mm). Two different drilling procedures were utilized, with diameters of 3.4 mm and 3.7 mm, at a low rotational speed of 30 rpm. Primary stability was assessed by measuring insertion torque (IT), removal torque (RT), and resonance frequency analysis (RFA). Results: The low rotational speed of 30 rpm was found to be effective for achieving favorable fixation parameters in all scenarios. The 0.45 mm thread consistently exhibited higher implant stability quotient (ISQ) values (from two to six points higher) compared to the 0.40 mm and standard 0.35 mm threads, while also requiring lower IT. The highest ISQ values were recorded in the 20 pounds per cubic foot (PCF) block with a cortical layer using the 0.45 mm thread and a 3.4 mm drill. The under-preparation using the 3.4 mm drill resulted in higher IT and RT values than the 3.7 mm drill. Conclusions: This study demonstrated that implant thread pitch and drilling technique are critical factors influencing primary stability. Utilizing a wider thread pitch (0.45 mm) along with an under-preparation drilling protocol can significantly improve implant stability, even in low-density bone, without the need for excessive IT. These findings suggest that selecting the appropriate implant macrogeometry and surgical technique can optimize the primary stability of dental implants. Full article

Background and Objectives: Revision anterior cruciate ligament reconstruction (ACLR) is demanding and yields inferior outcomes compared with primary procedures. The quadriceps tendon (QT) autograft with bone block has biomechanical and biological advantages though clinical evidence in revision remains limited. This study evaluated the clinical and radiological outcomes of revision ACLR using bone-block QT autograft in young, active patients. Materials and Methods: A case series with a level of evidence of 4. Thirty-four patients (28 men, 6 women; mean age, 27.2 ± 5.8 years) who underwent revision ACLR with a bone-block QT autograft between 2021 and 2023 were retrospectively reviewed. The mean follow-up was 37.4 ± 3.2 months. Clinical assessments included the Lysholm, International Knee Documentation Committee (IKDC) subjective, and Tegner activity scores, along with isokinetic strength testing. Objective stability was evaluated using pivot shift grading and Telos stress radiography. Radiological analyses included 3D computed tomography for tunnel positioning and magnetic resonance imaging for tunnel widening. Perioperative and postoperative complications were recorded. Results: All clinical outcomes improved significantly from baseline to 2-year follow-up: Lysholm (62.7 ± 9.6 to 87.1 ± 10.3), IKDC (59.0 ± 10.8 to 79.5 ± 11.1), and Tegner (3.5 ± 1.2 to 5.6 ± 1.3; all p < 0.001). However, the Tegner score remained lower than the pre-injury level (6.1 ± 1.4; p = 0.035). At the final follow-up, 91.2% of the patients had returned to sports, with 59% resuming sports at their pre-injury level or higher. Side-to-side anterior laxity decreased from 8.5 ± 1.7 mm to 1.4 ± 1.1 mm on Telos stress radiography (p < 0.001). Preoperatively, 82% of patients demonstrated high grade pivot shift (≥grade 2), which improved to 91% graded as negative or grade 1 at final follow-up (p < 0.001). Isokinetic evaluation showed improvements in quadriceps (28.7% ± 12.5% to 12.4% ± 8.1%) and hamstring (18.3% ± 9.7% to 8.9% ± 6.5%) deficit (both p < 0.001). MRI demonstrated minimal tunnel widening (tibia, +1.3 ± 0.9 mm, p = 0.012; femur, +0.3 ± 0.6 mm, p = 0.148). Three complications (8.8%) were observed: one cyclops lesion, one transient extension deficit, and one graft rupture. No patellar fractures, septic arthritis, or revision procedures occurred during the follow-up period. Conclusions: Bone-block QT autografts provide a reliable option for revision ACLR, yielding functional improvement, restored stability, and minimal donor-site morbidity, with low complications. These findings support their consideration as the preferred graft choice for young active patients needing revision reconstruction. Full article

Objective: To compare the effect of different bone augmentation procedures, namely, autogenous bone blocks (ABBs) versus guided bone regeneration (GBR), on patient-reported outcomes (PROMs). Methods: This systematic review was conducted according to the PRISMA guidelines. A MEDLINE, Embase, and Web of Science search was conducted by two independent reviewers in combination with a free-hand search in relevant journals until June 2025. Outcomes were PROMs to enhance our understanding of the evolution of these procedures. Results: The electronic search yielded 6291 articles. After title screening, 67 articles were further analyzed for abstract review, which resulted in 14 articles eligible for full-text reading. Six articles were finally included based on the exclusion and inclusion criteria with a total of 295 patients. The overall study quality was low, since only two RCTs could be included. One study demonstrated a high risk of bias. Different PROMs were examined and compared such as pain, edema, neurosensory disturbance, Patient-Reported Predominant Symptom, OHIP-14, postoperative analgesic usage, willingness to repeat, and likelihood to recommend. Meta-analysis was not achievable due to a lack of direct comparisons and heterogeneity in terms of PROMs. Evaluation points varied between pretreatment and up to nearly 10-years of follow-up. Conclusions: Despite significant heterogeneity and reporting, this systematic review concluded that ABB and GBR are well-tolerated procedures. Trends such as transient postoperative pain and swelling with a minor occurring of neurosensory disturbances were reported in a few studies. Overall, a good perception of postoperative recovery was reported for both treatment modalities. Good quality of life was noted related to GBR procedures. Patient-reported outcomes were only analyzed for patients who completed the entire follow-up period. This may introduce bias, as patients who dropped out and were more likely to experience complications were not represented, potentially resulting in a more favorable portrayal of the outcomes. Further well-conducted prospective studies with a long follow-up are needed for an evidence-based evaluation and comparison of PROMs for these procedures. Full article

Background and Objectives: Although the use of allografts in revision anterior cruciate ligament reconstruction is associated with theoretical advantages, it has historically led to poorer clinical results and lower survival rates. However, the heterogeneity of the available literature makes it difficult to elucidate the effectiveness of allographs, as most of the studies published do not make any reference to some of the key aspects related to the processing of the allograft employed. The present study analyzed the clinical results and the survival of allografts in patients undergoing revision anterior cruciate ligament reconstruction with a well-characterized, single type of allograft. Materials and Methods: This was a retrospective observational study analyzing a series of patients undergoing revision anterior cruciate ligament reconstruction with an Achilles tendon allograft with a bone block (FlexiGraft, LifeNet Health), subjected to low-dose irradiation at dry ice temperatures. Preoperative and follow-up clinical variables (IKDC, pain, hop test, and YBT scores) were recorded. Survival was analyzed using the Kaplan–Meier methodology. Results: A total of 39 patients (34 male, 5 female) were included in the study. The mean patient age was 37.3 years and mean postoperative follow-up was 78.7 months. Forty-one percent of patients were competitive athletes, and all of the patients in the sample exhibited preoperative instability. The mean allograft thickness was 9.2 mm. During surgery, 51.3% of patients required meniscus repair and 20.5% had to be treated for chondral defects. At the last follow-up visit, 92.3% of the subjects presented with IKDC grade A and 7.7% with IKDC grade B. The mean subjective IKDC score was 0.79 and mean pain intensity was 1.15 according to the VAS scale. Limb symmetry, as measured by the various hop tests and the Y balance test, were within the safety range, with 74.4% of patients succeeding in returning to their previous level of sport. Ten-year survival was estimated at 97.4%. Conclusions: Allografts obtained and processed following the current regulations governing patient selection and graft harvesting, which are additionally processed without recourse to chemical procedures and sterilized at less than 2 MRad in dry ice conditions, represent an effective and safe alternative in revision anterior cruciate ligament reconstruction. Full article

Background: The autogenous bone core block (BCB) is a viable, biologically advantageous, and minimally invasive alternative to other augmentation procedures for small bone defects around dental implants. This study focused specifically on horizontal vestibular defects in the mandible, a frequently encountered yet underrepresented clinical situation, to evaluate the effectiveness and predictability of bone core grafting. Methods: Cylindrical autogenous bone cores, harvested from the implant-site osteotomy using trephine drills with a 2.5 internal diameter, were stabilized with osteosynthesis screws, and implants were placed simultaneously. Initial preoperative measurements of the edentulous ridge width were performed based on cone beam computer tomography (CBCT). At 4 months postoperatively, a subsequent CBCT measurement was performed for each implant site. Results: A total of 38 augmentation procedures were analyzed with a mean horizontal bone gain of 1.8 mm (p = 0.000). Improved outcomes were observed in V-shaped defects with remaining vertical bony walls, which contributed to better graft stability and volume preservation. While Khoury et al. previously validated the general applicability of this technique across various defect types, our study refines its indication by offering a clear protocol tailored to a common clinical niche. Conclusions: The proposed BCB method proved to be a safe, efficient, and with reduced morbidity procedure, providing clinicians with a practical and evidence-based tool for predictable horizontal bone augmentation. Full article

Background/Objectives: Traditional treatment for chronic osteomyelitis is temporary implantation of antibiotic-impregnated cement beads, followed by bone grafting after the infection is controlled. In this way, a staged operation is needed, and undergoing repetitive general anesthesia is a burden. Moreover, damage to the soft tissue at the surgical site due to several incisions is a concern. This study was conducted to investigate the outcomes of one-stage antibiotic-mixed cement blocks, instead of beads, used as a primary salvage procedure to treat chronic osteomyelitis of the foot, ankle, and lower leg. Methods: Twenty patients with chronic osteomyelitis of the leg and foot were included. They underwent complete debridement of the infected bone, and antibiotic-mixed cement fillings were placed into the defected bone space. Full-weight-bearing activities were allowed immediately after surgery. Results: For 16 of the 18 patients, infection was controlled after one-time surgery. Repeat antibiotic cement-filling surgery was necessary for two patients. Two-staged surgery with continuous irrigation and cement filling was necessary for one large tibial lesion. Conversion into arthrodesis of the metatarsophalangeal joint was necessary for metatarsal head infection. Conclusions: One-stage surgery with complete debridement and antibiotic-mixed cement filling is a simple and effective procedure for treating intractable chronic osteomyelitis, which makes full-weight-bearing walking possible immediately after surgery. Full article

Anteroinferior shoulder dislocations require surgical intervention when related to critical glenoid bone loss. Scapular spine bone blocks have emerged as a promising alternative to traditional bone augmentation techniques. However, limited data exist on their biomechanical stability when using different suture-based fixation techniques. This study aimed to evaluate primary stability and micromotion after glenoid augmentation using a scapular spine bone block. A total of 31 fresh-frozen human shoulder specimens underwent bone block augmentation. The specimens were randomized into three groups: double-screw fixation (DSF), single-suture bone block cerclage (SSBBC), and double-suture bone block cerclage (DSBBC). Biomechanical testing was conducted using cyclic loading (5000 cycles at 1 Hz) and micromotion was analyzed using an optical 3D measurement system. Statistical analysis showed that medial irreversible displacement was significantly greater in the SSBBC group compared to DSF (p = 0.0386), and no significant differences were found in anterior or inferior irreversible displacements. A significant difference was noted in posterior reversible displacement (p = 0.0035), while no differences were found in inferior or medial reversible displacements. Between DSF and DSBBC, no significant differences were found in irreversible or reversible displacements in any direction. DSBBC provided stability comparable to DSF while offering a viable metal-free alternative. In contrast, SSBBC displayed inferior biomechanical properties, raising concerns about its clinical reliability. Full article

Arthroscopic shoulder surgery has undergone significant advancements over the past decades, transitioning from a primarily diagnostic tool to a comprehensive therapeutic approach. Technological innovations and refined surgical techniques have expanded the indications for arthroscopy, allowing minimally invasive management of shoulder instability and rotator cuff pathology. Methods: This narrative review explores the historical evolution, current trends, and future perspectives in arthroscopic shoulder surgery. Results: Key advancements in shoulder instability management include the evolution of the arthroscopic Bankart repair, the introduction of the remplissage technique for Hill–Sachs lesions, and the development of arthroscopic Latarjet procedures. Additionally, novel techniques such as Dynamic Anterior Stabilization (DAS) and bone block procedures have emerged as promising solutions for complex instability cases. In rotator cuff repair, innovations such as the suture-bridge double-row technique, superior capsular reconstruction (SCR), and biological augmentation strategies, including dermal allografts and bioinductive patches, have contributed to improving tendon healing and functional outcomes. The role of biologic augmentation, including biceps tendon autografts and subacromial bursa augmentation, is also gaining traction in enhancing repair durability. Conclusions: As arthroscopic techniques continue to evolve, the integration of biologic solutions and patient-specific surgical planning will likely define the future of shoulder surgery. This review provides a comprehensive assessment of current state-of-the-art techniques and discusses their clinical implications, with a focus on optimizing patient outcomes and minimizing surgical failure rates. Full article

Musculoskeletal ultrasound (US) imaging faces challenges such as operator experience, limited spatial flexibility, and high personnel costs. This study introduces an Automated Robotic Ultrasound Scanning (ARUS) system that integrates key technological advancements to automate the ultrasound scanning procedure with the robot, including anatomical target localization, automatic trajectory generation, deep-learning-based segmentation, and 3D reconstruction of musculoskeletal structures. The ARUS system consists of a robotic arm, ultrasound imaging, and stereo vision for precise anatomical area detection. A Graphical User Interface (GUI) facilitates a flexible selection of scanning trajectories, improving user interaction and enabling customized US scans. To handle complex and dynamic curvatures on the skin, together with anatomical area detection, the system employs a hybrid position–force control strategy based on the generated trajectory, ensuring stability and accuracy. Additionally, the utilized RA-UNet model offers multi-label segmentation on the bone and muscle tissues simultaneously, which incorporates residual blocks and attention mechanisms to enhance segmentation accuracy and robustness. A custom musculoskeletal phantom was used for validation. Compared to the reference 3D reconstruction result derived from the MRI scan, ARUS achieved a 3D reconstruction root mean square error (RMSE) of 1.22 mm, with a mean error of 0.94 mm and a standard deviation of 0.77 mm. The ARUS system extends 3D musculoskeletal imaging capacity by enabling both bones and muscles to be segmented and reconstructed into 3D shapes in real time and simultaneously. These features suggest significant potential as a cost-effective and reliable option for musculoskeletal examination and diagnosis in real-time applications. Full article

Background: A common problem in pediatric orthopedics is leg length discrepancy (LLD). In adulthood, this may result in overload and degenerative changes in the lumbar spine, hip, and knee joints of the longer limb, and the fixed equinus position of the foot of the shorter limb. Surgical treatment using temporary epiphysiodesis with eight-plate implants is a minimally invasive, safe, and patient-tolerated procedure in LLD. However, publications mainly describe the effects of treatment in the form of achieved equalization and there is little information about the occurrence of secondary deformations. Our study aimed to determine the effect of temporary growth plate blocking on the final axis after treatment. Methods: The study was based on an analysis of radiographs recorded from 2010 to 2019 and an assessment of parameters such as MAD (mechanical axis deviation), mMPTA (mechanical medial proximal tibial angle), and M/at (mechanical axis of the tibia). Results: Twenty-four girls and thirty-six boys treated with eight-plate implants were included in the investigation. The duration of the treatment was 18 months (group I), 30 months (group II), and 42 months (group III). Our study revealed that the most significant differences were observed in the MAD parameter. MAD changed in a statistically significant manner across all investigated groups, for both girls and boys, regardless of the treatment duration. Conclusions: The treatment of LLD with epiphysiodesis using eight-plate implants influences both the anatomical axis of the bones and the mechanical axis of the limb. Full article

Background: The treatment of patients affected by recurrent anterior shoulder instability has received more attention in the last ten years, focusing on the management of bone loss, which is crucial in predicting postoperative recurrence risk. Recently, various bone grafting techniques and different fixation methods have been developed to preserve native anatomy and reduce complications. Nowadays, glenoid bone reconstruction is usually carried out via the Latarjet procedure or free bone block technique. While the Latarjet procedure has traditionally been considered the best option, the bone block has been demonstrated to be a successful procedure. Even though the indication to perform a free bone block or a Latarjet procedure may be given preoperatively, in cases where the choice between the two procedures is unclear, the decision can be made intraoperatively, given the possibility to switch from one to another. This technical note aims to outline our techniques for the arthroscopic Latarjet procedure and the arthroscopic free bone block, as well as discuss the indications, benefits and downsides of each procedure. Technical tips and tricks are provided. Methods: A step-by-step thorough description of bone block and Latarjet procedures is provided, as well as a comparison of advantages and disadvantages of each technique and tips to avoid complications. Respective indications are discussed. Results: Both the procedures have benefits and downsides. The arthroscopic Latarjet procedure is the most effective in addressing anterior shoulder instability, but is more elaborate, has a shallow learning curve and can have a high complication rate. The bone block technique is an anatomic procedure with a shorter learning curve but has fewer indications. Conclusion: The Latarjet is currently considered the gold standard for glenoid bone grafting. The bone block technique can allegedly be seen as being “in the middle” of the soft tissue repair and Latarjet procedures. Many factors should be considered when choosing the right surgical technique, and treatment plans must be customized for each patient. More studies with long-term follow-up are needed to evaluate the efficacy of arthroscopic bone grafting procedures in various subtypes of patients based on bipolar bone loss assessment and individual risk factors. Full article

Objectives: The aim of this matched prospective cohort study was to examine the microarchitecture of the augmented bone following a modified alveolar ridge splitting procedure and compare it to that of native bone. Methods: In the test group, patients underwent a modified ridge split osteotomy procedure to restore the width of the posterior segment of the mandible. Patients with sufficient bone width for dental implant placement in the posterior region of the mandible following 3-month-long spontaneous healing after tooth removal were included in the control group. In both study groups, bone biopsy samples were harvested and dental implants were placed. Histomorphometry and micro-CT analysis were performed. Results: Altogether, 15 patients were included in this study (7 patients in the test group, with 14 bone core biopsies harvested, and 8 patients in the control group, with 13 bone core biopsies harvested). Percentage bone volume (BV/TV) in the micro-CT analysis (22.088 ± 8.094% and 12.075 ± 4.009% for the test and control group, respectively) showed statistically significant differences between study groups. Conclusions: Based on histological and micro-CT analyses, the modified ridge splitting procedure with autologous bone block harvested from the retromolar area results in a dental implant recipient bone microarchitecture superior to that of the extraction sockets left to heal undisturbed for a 3-month-long healing period. Full article

After tooth loss, particularly in the posterior maxilla, the alveolar ridges undergo bone resorption. Therefore, ensuring the appropriate quantity and quality of alveolar bone is crucial for accurate implant positioning and achieving optimal esthetic and functional results. This study aimed to evaluate biomechanical parameters (insertion torque: IT, removal torque: RT, and implant stability quotient: ISQ) of distinct truncated cone implant designs (Sinus-plant and SLC) on polyurethane blocks simulating type D3 and D4 bone. SLC implants exhibited significantly higher IT, RT, and ISQ values compared to Sinus-plant implants, except in the 10 pounds per cubic foot (PCF) density block with a cortical layer for the IT (24.01 ± 0.91 vs. 23.89 ± 1.66 Ncm). The IT values for SLC implants ranged from 13.95 ± 0.19 Ncm in the lowest density block to 37.94 ± 0.45 Ncm in the highest density block, consistently providing significantly higher primary stability with an ISQ of approximately 70 in the highest density block. Despite lower ISQ in the lowest density block (48.60 ± 0.52 and 48.80 ± 0.42 in buccolingual and mesiodistal directions), it was deemed acceptable considering the inadequate bone densities in the maxillary region. These findings on SLC suggest potential clinical advantages, including reduced procedure duration and costs, improved stability, and the possibility of immediate implant placement following sinus augmentation, thereby streamlining the rehabilitation process. Full article

Background: Intraosseous vascular anomalies in the facial skeleton present significant diagnostic and therapeutic challenges due to complex anatomy. These anomalies represent about 0.5–1% of bony neoplastic and tumor-like lesions, usually presenting as a firm, painless mass. Most described intraosseous vascular malformations are venous malformations (VMs) and, more rarely, arteriovenous malformations. Objectives: The objectives of this work are to show our experience, protocol and the applications of computer planning, virtual surgery, CAD-CAM design, surgical navigation, and computer-assisted navigated piezoelectric surgery in the treatment of facial intraosseous vascular anomalies and to evaluate the advantages and disadvantages. Methods: Three females and one male with periorbital intraosseous vascular anomalies were treated using en-block resection and immediate reconstruction with a custom-made PEEK prosthesis. One lesion was in the supraorbital rim and orbital roof, one in the frontal bone and orbital roof, and two in the zygomatic region. We accomplished the resection and reconstruction of the lesion using virtual planning, CAD-CAM design, surgical navigation and piezoelectric device navigation. Results: There were no complications related to the surgery assisted with navigation. With an accuracy of less than 1 mm, the procedure may be carried out in accordance with the surgical plan. The surgeon’s degree of uncertainty during deep osteotomies and in locations with low visibility was decreased by the use of the navigated piezoelectric device. Conclusions: Resection and reconstruction of facial intraosseous vascular anomalies benefit from this new surgical strategy using CAD-CAM technologies, computer-assisted navigated piezoelectric surgery, and surgical navigation. Full article