Search Results (16)

Herein, zein–inulin-stabilized thyme essential oil (TEO) Pickering emulsions were prepared via ultrasonication. The addition of inulin (0.12–0.5%) enhanced emulsion stability and antibacterial activity, with particle sizes ranging from 73.7 to 789.8 nm. Chitosan (CS) composite films were then fabricated using different TEO loading methods. Films incorporating Pickering emulsions exhibited denser and smoother structures due to hydrogen bonding between the emulsion and chitosan matrix, while electrostatic interactions between zein and inulin enabled effective TEO encapsulation. Compared to the pure CS film, the Pickering emulsion active films exhibited improved thermal stability, with a maximum decomposition temperature of 260 °C, blocked up to 82.22% of UV light in the UVA region (320–400 nm), displayed increased hydrophobicity (maximum water contact angle of 75.70°), and showed the strongest scavenging activity toward both DPPH (93.27%) and ABTS (98.42%). Moreover, these films effectively reduced weight loss, minimized firmness decline, suppressed pH increase, and inhibited microbial growth, thereby delaying blueberry spoilage. Based on the appearance and total soluble solids content of blueberries, the chitosan Pickering emulsion (containing 0.25% inulin) film (type VI) presented the best preservation performance among the eight tested films. This study highlights the potential of chitosan-based Pickering emulsion active films for food packaging applications. Full article

Background: Human Immunodeficiency Virus type 1 (HIV-1) remains a major global health challenge. Despite advances in antiretroviral therapy, new prevention strategies are needed, particularly topical microbicides capable of blocking the earliest steps of viral entry. HIV-1 attachment relies on interactions with heparan sulfate proteoglycans on host cell surfaces; therefore, sulfated heparan-mimetic polymers have been explored as antiviral agents. In this context, sulfated chitosan microparticles are designed to mimic natural glycosaminoglycan receptors, acting as biomimetic decoys that prevent viral attachment and entry. Methods: Low-molecular-weight sulfated chitosan (LMW Chi-S) microparticles were synthesized and characterized (SEM, EDS, DLS, FTIR) following US Patent No. 11,246,839 B2. Their antiviral activity was evaluated by incubating the microparticles with high-viral-load HIV-1-positive plasma (~3.5 × 10⁶ copies/mL) to enable viral binding and removal by pull-down. The performance of the synthesized Chi-S microparticles was compared with established heparinoid controls, including soluble heparin and heparin microparticles. Results: Chi-S microparticles exhibited stronger virus-binding and neutralizing capacity than all heparinoid comparators, achieving up to 70% reduction in viral load relative to untreated HIV-1 plasma. In comparison, soluble heparin and heparin microparticles reduced viral load by approximately 53% and 60%, respectively. Subsequent evaluation across multiple tested concentrations confirmed a consistent antiviral effect, indicating that the synthesized Chi-S microparticles maintain robust virus–particle interactions throughout the concentration range examined. Conclusions: These findings demonstrate that LMW Chi-S microparticles possess potent antiviral properties and outperform classical heparinoid materials, supporting their potential application as topical microbicides targeting early HIV-1 entry mechanisms. Full article

Stress modifiers are recognized as biostimulants providing beneficial effects on various plant species. However, the specific potential of modulators such as melatonin, chitosan, humic acid, and selenium in enhancing the resistance of ajwain (Carum copticum L.) plants to water scarcity remains an open question. To address this knowledge gap, we conducted a randomized, field block-designed factorial experiment over two years (2022–2023) to compare the effectiveness of these biostimulants in mitigating the impact of water shortage on ajwain plants. This study involved three irrigation regimes: 100% field water capacity (FC100%—unstressed), 75% irrigation deficit (FC75%—moderate) and 50% irrigation deficit (FC50%—severe), and four modifier treatments (melatonin, chitosan, humic acid, selenium), plus untreated controls. Plant growth, seed yields, essential oil production, as well as eco-physiological traits were studied to assess the efficacy of these compounds as stress modulators. Water regimes and stress modifier applications, as a single factor or in synergy, significantly affected plant physiology and seed yield, highlighting the importance of sustainability in agricultural practices. Compared to FC100%, biological and seed yield, chlorophyll, and nutrient content decreased under FC75% and FC50%, while essential oil production, proline, soluble sugars, flavonoids, phenols and antioxidant enzymatic activity increased. Notably, regardless of the type of modulator used, the application of these modifiers improved all physiological attributes under moderate and severe irrigation deficits. Among the involved compounds, melatonin induced the most pronounced effects, leading to higher biological and seed yield, essential and fixed oil production, relative leaf water content, chlorophyll and nutrient concentration, and antioxidant activity. Our results demonstrate that such compounds effectively function as stress modulators against water scarcity in ajwain plants by preserving specific eco-physiological traits and promoting water saving. These findings provide valuable insights into their use as a nature-based solution for addressing water stress in sustainable agriculture and climate change challenges. Full article

Salinity and water security are significant challenges in arid climates, necessitating effective practices to enhance crop productivity in these stressful environments. To address this, a study was conducted during the summer seasons of 2022 and 2023 using a randomized, completely block setup with three replications. The research assessed the effects of different mulch materials, unmulched (bare soil), white plastic, rice straw, and sawdust, combined with biostimulant foliar applications (control, bulk chitosan at 250 mg/L, and two concentrations of chitosan nanoparticles at 125 mg/L and 62.5 mg/L) on physiochemical and biological properties of salt-affected soil, as well as on the growth and yield of cowpeas. The findings of this study indicate that different mulch materials exert distinct effects based on their type. For instance, white plastic mulch with chitosan nanoparticles at a concentration of 62.5 mg/L markedly decreased soil salinity (by 10.80% and 14.64%) and ESP (by 6.93% and 6.80%). In contrast, white plastic mulch paired with a control foliar application significantly increased the soil moisture content (by 23.93% and 27.63%) compared to un-mulched soil. The combination of organic mulches and biostimulant foliar treatments significantly enhanced soil health by increasing the pH, organic carbon, nutrient content, and beneficial bacteria while reducing the bulk density and suppressing harmful fungi. Biostimulant foliar treatments have a modest affected soil property. Additionally, this study highlights that integrating specific mulching materials with biostimulant foliar treatments can significantly improve cowpea’s vegetative growth, yield, and nutrient content. This suggests that combining mulches and biostimulants may provide a sustainable solution for enhancing cowpea production in saline environments. Full article

The flammability of rigid polyurethane foam (RPUF) limits its application. A new type of chitosan phase-change microcapsule (CS/PCM) was successfully prepared by the condensation method with chitosan and gum acacia as the wall material and paraffin as the core material. CS/PCM was introduced into RPUF composite material as filler to improve the thermal and flame-retardant properties of polyurethane. The morphology, structure, thermal properties and flame retardancy of the materials were characterized by scanning electron microscopy (SEM), X-ray diffractometer (XRD), thermogravimetric (TG) analysis, differential scanning calorimetry (DSC) and cone calorimetry. It is found that when the CS/PCM content is 30 wt%, the latent heat of phase transition of RPUF-30 is 12.308 J/g, the limiting oxygen index (LOI) is 26.1% and the fire risk is reduced. The flame-retardant mechanism shows that the barrier effect provided by chitosan plays an important role in effectively blocking the transfer of heat and combustible gas, and improving the flame-retardant property of the composite. This paper provides a new idea for the application of CS/PCM in RPUF. Full article

This research focused on developing new materials for endodontic treatments to restore tissues affected by infectious or inflammatory processes. Three materials were studied, namely tricalcium phosphate β-hydroxyapatite (β-TCP), commercial and natural hydroxyapatite (HA), and chitosan (CS), in different proportions. The chemical characterization using infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the composition of the composite. Scanning electron microscopy (SEM) demonstrated that the design and origin of the HA, whether natural or commercial, did not affect the morphology of the composites. In vitro studies using Artemia salina (A. salina) indicated that all three experimental materials were biocompatible after 24 h, with no significant differences in mortality rate observed among the groups. The subdermal implantation of the materials in block form exhibited biocompatibility and biodegradability after 30 and 60 days, with the larger particles undergoing fragmentation and connective tissue formation consisting of collagen type III fibers, blood vessels, and inflammatory cells. The implanted material continued to undergo resorption during this process. The results obtained in this research contribute to developing endodontic technologies for tissue recovery and regeneration. Full article

Tomato pomace is a low-cost, renewable resource that has been studied for the extraction of the biopolyester cutin, which is mainly composed of long-chain hydroxy fatty acids. These are excellent building blocks to produce new hydrophobic biopolymers. In this work, the monomers of cutin were extracted and isolated from tomato pomace and utilized to produce cutin-based films. Several strategies for the depolymerization and isolation of monomeric cutin were explored. Strategies differed in the state of the raw material at the beginning of the extraction process, the existence of a tomato peel dewaxing step, the type of solvent used, the type of alkaline hydrolysis, and the isolation method of cutin monomers. These strategies enabled the production of extracts enriched in fatty acids (16-hydroxyhexadecanoic, hexadecanedioic, stearic, and linoleic, among others). Cutin and chitosan-based films were successfully cast from cutin extracts and commercial chitosan. Films were characterized regarding their thickness (0.103 ± 0.004 mm and 0.106 ± 0.005 mm), color, surface morphology, water contact angle (93.37 ± 0.31° and 95.15 ± 0.53°), and water vapor permeability ((3.84 ± 0.39) × 10⁻¹¹ mol·m/m²·s·Pa and (4.91 ± 1.33) × 10⁻¹¹ mol·m/m²·s·Pa). Cutin and chitosan-based films showed great potential to be used in food packaging and provide an application for tomato processing waste. Full article

Glaucoma is a degenerative, chronic ocular disease that causes irreversible vision loss. The major symptom of glaucoma is high intraocular pressure, which happens when the flow of aqueous humor between the front and back of the eye is blocked. Glaucoma therapy is challenging because of the low bioavailability of drugs from conventional ocular drug delivery systems such as eye drops, ointments, and gels. The low bioavailability of antiglaucoma agents could be due to the precorneal and corneal barriers as well as the low biopharmaceutical attributes of the drugs. These limitations can be overcome by employing nanoparticulate drug delivery systems. Over the last decade, there has been a lot of interest in chitosan-based nanoparticulate systems to overcome the limitations (such as poor residence time, low corneal permeability, etc.) associated with conventional ocular pharmaceutical products. Therefore, the main aim of the present manuscript is to review the recent research work involving the chitosan-based nanoparticulate system to treat glaucoma. It discusses the significance of the chitosan-based nanoparticulate system, which provides mucoadhesion to improve the residence time of drugs and their ocular bioavailability. Furthermore, different types of chitosan-based nanoparticulate systems are also discussed, namely nanoparticles of chitosan core only, nanoparticles coated with chitosan, and hybrid nanoparticles of chitosan. The manuscript also provides a critical analysis of contemporary research related to the impact of this chitosan-based nanomedicine on the corneal permeability, ocular bioavailability, and therapeutic performance of loaded antiglaucoma agents. Full article

Chitooligosaccharides, the degradation products of chitin and chitosan, possess anti-bacterial, anti-tumor, and anti-inflammatory activities. The enzymatic production of chitooligosaccharides may increase the interest in their potential biomedical or agricultural usability in terms of the safety and simplicity of the manufacturing process. Crab-eating monkey acidic chitinase (CHIA) is an enzyme with robust activity in various environments. Here, we report the efficient degradation of chitin and chitosan by monkey CHIA under acidic and high-temperature conditions. Monkey CHIA hydrolyzed α-chitin at 50 °C, producing N-acetyl-d-glucosamine (GlcNAc) dimers more efficiently than at 37 °C. Moreover, the degradation rate increased with a longer incubation time (up to 72 h) without the inactivation of the enzyme. Five substrates (α-chitin, colloidal chitin, P-chitin, block-type, and random-type chitosan substrates) were exposed to monkey CHIS at pH 2.0 or pH 5.0 at 50 °C. P-chitin and random-type chitosan appeared to be the best sources of GlcNAc dimers and broad-scale chitooligosaccharides, respectively. In addition, the pattern of the products from the block-type chitosan was different between pH conditions (pH 2.0 and pH 5.0). Thus, monkey CHIA can degrade chitin and chitosan efficiently without inactivation under high-temperature or low pH conditions. Our results show that certain chitooligosaccharides are enriched by using different substrates under different conditions. Therefore, the reaction conditions can be adjusted to obtain desired oligomers. Crab-eating monkey CHIA can potentially become an efficient tool in producing chitooligosaccharide sets for agricultural and biomedical purposes. Full article

Chitooligosaccharides exhibit several biomedical activities, such as inflammation and tumorigenesis reduction in mammals. The mechanism of the chitooligosaccharides’ formation in vivo has been, however, poorly understood. Here we report that mouse acidic chitinase (Chia), which is widely expressed in mouse tissues, can produce chitooligosaccharides from deacetylated chitin (chitosan) at pH levels corresponding to stomach and lung tissues. Chia degraded chitin to produce N-acetyl-d-glucosamine (GlcNAc) dimers. The block-type chitosan (heterogenous deacetylation) is soluble at pH 2.0 (optimal condition for mouse Chia) and was degraded into chitooligosaccharides with various sizes ranging from di- to nonamers. The random-type chitosan (homogenous deacetylation) is soluble in water that enables us to examine its degradation at pH 2.0, 5.0, and 7.0. Incubation of these substrates with Chia resulted in the more efficient production of chitooligosaccharides with more variable sizes was from random-type chitosan than from the block-type form of the molecule. The data presented here indicate that Chia digests chitosan acquired by homogenous deacetylation of chitin in vitro and in vivo. The degradation products may then influence different physiological or pathological processes. Our results also suggest that bioactive chitooligosaccharides can be obtained conveniently using homogenously deacetylated chitosan and Chia for various biomedical applications. Full article

This study aimed to evaluate the healing of furcation when repaired with Chitosan (CS) scaffold impregnated or not with Simvastatin (SIM) compared with CollaCote (CL) in goat premolar teeth. Root canal treatment was performed in 52 mandibular premolars followed by furcal perforation induction. The perforation was repaired with CL, CS, or CS with SIM after leaving it untreated for 4 weeks. White mineral trioxide aggregate was carried into the furcal site followed by a 2–3 mm resin-modified glass ionomer. The perforation was left untreated, and the access cavity was left open without coronal filling in the control group. The animals were sacrificed after one and three months. Block sections of the premolars were prepared and examined histologically to evaluate the inflammation and type of healing. Hard tissue formation was found in CL, CS, and CS/SIM groups in both periods. At one month, no significant differences were detected among the experimental groups, whereas at three months, CS without SIM showed significantly better performance compared to CL and CS/SIM groups (p = 0.040). Therefore, repairing furcal perforation with CS scaffolds shows desirable biological responses and healing characteristics in favor of bone regeneration at three months. Full article

The fungal cell wall serves as the interface between the cell and the environment. Fungal cell walls are composed largely of polysaccharides, primarily glucans and chitin, though in many fungi stress-resistant cell types elaborate additional cell wall structures. Here, we use solid-state nuclear magnetic resonance spectroscopy to compare the architecture of cell wall fractions isolated from Saccharomyces cerevisiae spores and Cryptococcus neoformans melanized cells. The specialized cell walls of these two divergent fungi are highly similar in composition. Both use chitosan, the deacetylated derivative of chitin, as a scaffold on which a polyaromatic polymer, dityrosine and melanin, respectively, is assembled. Additionally, we demonstrate that a previously identified but uncharacterized component of the S. cerevisiae spore wall is composed of triglycerides, which are also present in the C. neoformans melanized cell wall. Moreover, we identify a tyrosine-derived constituent in the C. neoformans wall that, although it is not dityrosine, is a non-pigment constituent of the cell wall. The similar composition of the walls of these two phylogenetically distant species suggests that triglycerides, polyaromatics, and chitosan are basic building blocks used to assemble highly stress-resistant cell walls and the use of these constituents may be broadly conserved in other fungal species. Full article

This study demonstrates the possibility of developing a rapidly degradable chitosan-based multilayer film for controlled drug release. The chitosan (CHI)-based multilayer nanofilms were prepared with three different types of anions, hyaluronic acid (HA), alginic acid (ALG) and tannic acid (TA). Taking advantage of the Layer-by-Layer (LBL) assembly, each multilayer film has different morphology, porosity and thickness depending on their ionic density, molecular structure and the polymer functionality of the building blocks. We loaded drug models such as doxorubicin hydrochloride (DOX), fluorescein isothiocyanate (FITC) and ovalbumin (Ova) into multilayer films and analyzed the drug loading and release profiles in phosphate-buffered saline (PBS) buffer with the same osmolarity and temperature as the human body. Despite the rapid degradation of the multilayer film in a high pH and salt solution, the drug release profile can be controlled by increasing the functional group density, which results in interaction with the drug. In particular, the abundant carboxylate groups in the CHI/HA film increased the loading amount of DOX and decreased rapid drug release. The TA interaction with DOX via electrostatic interaction, hydrogen bonding and hydrophobic interaction showed a sustained drug release profile. These results serve as principles for fabricating a tailored multilayer film for drug delivery application. Full article

Chitosan is sensitive to environmental pH values due to its electric property. This study investigates whether the pH-responsive chitosan assay can provide a simple method to evaluate the aggressive behavior of cancer cells with cell detachment ratio. The epithelial–mesenchymal transition (EMT) is induced with transforming growth factor-β1 (TGF-β1) in the human non-small cell lung cancer cell line (A549). EMT-induced cells and untreated cells are cultured on chitosan substrates at pH 6.99 for 24 h, followed by pH 7.65 for 1 h. The cell detachment ratio (CDR) on pH-responsive chitosan rises with an increasing of the TGF-β1 concentration. The protein array reveals that the expression levels of the α2, α3, α5, β2, and β3 integrins are higher in EMT-induced A549 cells than in untreated cells. A further inhibition assay shows that adding β3 integrin blocking antibodies significantly decreases the CDR of EMT-induced cells from 32.7 ± 5.7% to 17.8 ± 2.1%. The CDR of mesenchymal-type lung cancer cells increases on pH-responsive chitosan through the β3 integrin. Notably, the CDR can be theoretically predicted according to the individual CDR on the pH-responsive chitosan surface, irrespective of heterogeneous cell mixture. The pH-responsive chitosan assay serves as a simple in vitro model to investigate the aggressive behavior of lung cancer including the heterogeneous cell population. Full article

There is growing interest in the development of non-toxic, natural wood preservation agents to replace conventional chemicals. In this paper, the antifungal activities of silver nanoparticles, chitosan oligomers, and propolis ethanolic extract were evaluated against white-rot fungus Trametes versicolor (L.) Lloyd, with a view to protecting Populus spp. wood. In order to create a more realistic in-service type environment, the biocidal products were assessed according to EN:113 European standard, instead of using routine in vitro antimicrobial susceptibility testing methods. Wood blocks were impregnated with the aforementioned antifungal agents by the vacuum-pressure method in an autoclave, and their biodeterioration was monitored over 16 weeks. The results showed that treatments based on silver nanoparticles, at concentrations ranging from 5 to 20 ppm, presented high antifungal activity, protecting the wood from fungal attack over time, with weight losses in the range of 8.49% to 8.94% after 16 weeks, versus 24.79% weight loss in the control (untreated) samples. This was confirmed by SEM and optical microscopy images, which showed a noticeably higher cell wall degradation in control samples than in samples treated with silver nanoparticles. On the other hand, the efficacy of the treatments based on chitosan oligomers and propolis gradually decreased over time, which would be a limiting factor for their application as wood preservatives. The nanometal-based approach is thus posed as the preferred choice for the industrial treatment of poplar wood aimed at wood-based engineering products (plywood, laminated veneer lumber, cross-laminated timber, etc.). Full article