Search Results (21)

The precipitation of minerals, in particular carbonates, is a widespread phenomenon in all ecosystems, where it assumes a high relevance both from a geological and biogeochemical standpoint. Most carbonate rocks are of biological origin and made in an aquatic environment. In particular, bioprecipitation of carbonates is believed to have started in the Mesoproterozoic Era, thanks to a process often driven by photosynthetic microorganisms. Nevertheless, an important contribution to carbonate precipitation is also due to the metabolic activity of heterotrophic bacteria, which is not restricted to specific taxonomic groups or to specific environments, making this process a ubiquitous phenomenon. In this framework, the relationship between carbonatogenic microorganisms and other living organisms assumes a particular interest. This study aims to isolate and identify the culturable heterotrophic bacterial component associated with the coenosarc of Corallium rubrum in order to evaluate the occurrence of strains able to precipitate carbonates. In particular, the study was focused on the identification and characterisation of bacterial strains isolated from a coral coenosarc showing a high carbonatogenic capacity under laboratory conditions. Samples of C. rubrum were taken in the coastal waters of three Italian regions. The concentration of the aerobic heterotrophic microflora colonising C. rubrum coenosarc samples spanned from 3 to 6∙10⁶ CFU/cm². This variation in microbial populations colonising the C. rubrum coenosarc, spanning over 6 orders of magnitude, is not mirrored by a corresponding variability in the colony morphotypes recorded, with the mean being 5.1 (±2.1 sd). Among these bacteria, the carbonatogenic predominant species was Staphylococcus equorum (93% of the isolates), whereas Staphylococcus xylosus and Shewanella sp. accounted only for 3% of isolates each. All these strains showed a remarkable capacity of precipitating calcium carbonate, in the form of calcite crystals organised radially as well crystalised spherulites (S. equorum) or coalescing spherulites (Shewanella sp.). S. xylosus only produced amorphous precipitates of calcium carbonate. All bacterial strains identified were positive both for the production of urease and carbon anhydrase in vitro at 30 °C. It seems that they potentially possess the major biochemical abilities conducive to Ca²⁺ precipitation, as they showed in vitro. In addition, all our carbonatogenic isolates were able to hydrolyse the phytic acid calcium salt and then were potentially able to induce precipitation of calcium phosphates also through such a mechanism. Full article

The heavy metal contamination of soils is a global environmental challenge threatening water quality, food safety, and human health. Using a systematic literature review approach, this study aimed to assess the potential of bacterial strains to immobilize cadmium (Cd²⁺), lead (Pb²⁺), and copper (Cu²⁺) in contaminated soils. A total of 45 articles were analyzed, focusing on studies that reported heavy metal concentrations before and after bacterial treatment. The analysis revealed that bacterial genera such as Bacillus, Pseudomonas, and Enterobacter were most commonly used for the immobilization of these metals. Immobilization efficiencies ranged from 25% to over 98%, with higher efficiencies generally observed when microbial consortia or amendments (e.g., phosphate compounds and biochar) were applied. The main immobilization mechanisms included biosorption, bioprecipitation (such as carbonate-induced precipitation), bioaccumulation, and biomineralization, which convert mobile metal ions into more stable, less bioavailable forms. These findings highlight the promising role of microbial-assisted immobilization in mitigating heavy metal pollution and reducing ecological risks. Further laboratory and field studies are needed to optimize the use of these microbial strains under site-specific conditions to ensure effective and sustainable soil remediation practices. Full article

This study investigates the use of a UASB (Upflow Anaerobic Sludge Blanket) reactor operating under continuous anoxic conditions to remediate Pb(II) contamination in aqueous environments. Two experimental runs were conducted to evaluate the microbiome’s performance in removing Pb(II) at varying concentrations, ranging from 80 to 2000 ppm, while monitoring nitrate and Pb(II) levels. Metabarcoding of the 16S rRNA gene was done to understand the detoxification mechanisms utilised by the microbial community in Pb(II) removal. The system demonstrated high robustness, achieving up to 99% Pb(II) removal efficiency with sufficient nutrient availability, particularly at 15 g/L yeast extract (YE), compared to lower nutrient levels of 5 g/L YE. Denitrification was identified as the dominant mechanism of detoxification, supported by additional processes such as biosorption, sulfur-reducing bacterial activity, bioprecipitation, and bioremoval. Analysis of the precipitate recovered from the reactor indicated the presence of elemental lead, PbS, and PbO, highlighting the potential for lead recovery. These findings suggest that the system not only effectively removes Pb(II) from contaminated environments but also offers a sustainable pathway for lead recovery through smelting, making it a promising circular bioremediation strategy. The results indicate that this biological approach is a viable solution for lead pollution and recovery in industrial applications. Full article

This work presents a biological remediation process for molybdenum-bearing wastewater which may lead to the fabrication of biogenic Mo chalcogenide particles with (photo)catalytic properties. The process is based on dissimilatory sulphate reduction, utilising sulphate-reducing bacteria (SRB), and reductive precipitation of molybdate which is the predominant species of molybdenum in oxygenated water/wastewater. The SRB culture was established in a biofilm reactor which was fed with synthetic solutions containing sulphate (17.7 mM), molybdate molybdenum (2 mM), divalent iron (1.7 mM) and ethanol as the carbon/electron donor. The performance of the bioreactor was monitored in terms of pH, sulphate and molybdenum (Mo(VI) and total) content. The presence of thiomolybdate species was studied by scanning UV-Vis absorbance of samples from the reactor outflow while the reactor precipitates were studied via electron microscopy coupled with energy dispersive spectrometry, X-ray diffractometry and laser light scattering. A molar molybdate/sulphate ratio of 1:12.5 proved effective for molybdate reduction and recovery by 76% in 96 h, whereas sulphate was reduced by 57%. Molybdenum was immobilised in the sulphidic precipitates of the bioreactor, presumably via two principal mechanisms: (i) microbially mediated reduction and precipitation, and (ii) thiomolybdate formation and sorption/incorporation into iron sulphides. Full article

Acid sulfate waters originated from acid rock drainage (ARD), affecting the La Silva stream (El Bierzo, Spain), present anomalously high values of rare earth elements and yttrium (REY). These REY are maintained dissolved along the water stream as sulfate ions forming complexes like REYSO₄⁺ and REY(SO₄)²⁻. Negatively charged REY complexes seem to have an affinity for iron precipitates found along the La Silva stream and its tributaries since their surface is positively charged at this low pH. The presence of iron-oxidizing bacteria in iron precipitates addresses the possibility of their implication in this REY immobilization and its potential use in (bio)remediation and strategic metal industry applications. Full article

Biocementation is an emerging nature-inspired method of producing eco-friendly cement for soil stabilization. This paper used the bovine-derived carbonic anhydrase (CA) enzyme to catalyse the bioprecipitation of CaCO₃ in a fine-grained soil and thus to biocement the soil. To increase the efficiency of the CA, an innovative copper–carbonic anhydrase (CA) hybrid was fabricated. This study is a proof-of-concept of the potential application of these enzyme carriers for soil biocementation. The hybrid carriers are aimed to enhance the stability, recovery and reusability of the enzyme used in the biocementation process. The results showed that the fabricated copper phosphate-based inorganic hybrid was stable throughout the duration of the tests (2 months) and under a wide range of pH and temperatures. Its enzymatic activity was enhanced compared to the free CA enzyme and it was proved suitable for soil biocementation. This was further confirmed by the SEM analysis. Additionally, the treated soil with the formulated hybrid carrier showed improved unconfined compressive strength, especially when the carriers were implemented into the soil by mixing. The material analysis by Raman spectroscopy confirmed calcium carbonate as the primary precipitate, consistent with soil biocementation. Overall, this innovative method of delivery of enzymes with enhanced stability and activity shows promise that, upon further development, it can be successfully used to increase the efficiency and sustainability of the biocementation process. Full article

Nowadays, a large amount of municipal solid waste incineration bottom ash (IBA) is produced from waste incineration plants; therefore, it is still a challenge for IBA management. To investigate the potential of microbially-induced carbonate precipitation (MICP) for IBA treatment, a harmless biobinder was prepared by using biosolutions with different bacterial concentrations. A series of tests were carried out on the sample of the IBA treated with different biosolutions, such as leaching behavior, sequential extraction, pH dependence, pore distribution, and microscopic morphology. The results showed that Zn, Cu, and Pb in the IBA after biotreatment were all below the standard limitation. In the sample with 10⁸ cells/mL bacterial concentration, the leaching concentrations of Zn, Cu, Pb, and Cr were 0.39 mg/L, 0.12 mg/L, 0.025 mg/L, and 0.021 mg/L, respectively, and the average immobilization ratio reached 76.4%. The results of the characterization and microscopic morphology showed that biomineralization generated a large number of bioprecipitates and biogels, which formed a compact structure to reduce the pore size of samples, thus immobilizing the heavy metals. The bacteria could change the chemical speciation and bonds of the heavy metals by induction, which turned the heavy metals into stable compounds. Additionally, the lowest leaching concentration of Zn, Cu, Pb, and Cr appeared at pH of 8–10.5. This study analyzed the feasibility of bacterial concentration for IBA solidification/stabilization and provides a new biotechnology idea for IBA management. Full article

Environmental contamination with heavy metals is one of the major problems caused by human activity. Bioremediation is an effective and eco-friendly approach that can reduce heavy metal contamination in the environment. Bioremediation agents include bacteria of the genus Bacillus, among others. The best-described species in terms of the bioremediation potential of Bacillus spp. Are B. subtilis, B. cereus, or B. thuringiensis. This bacterial genus has several bioremediation strategies, including biosorption, extracellular polymeric substance (EPS)-mediated biosorption, bioaccumulation, or bioprecipitation. Due to the above-mentioned strategies, Bacillus spp. strains can reduce the amounts of metals such as lead, cadmium, mercury, chromium, arsenic or nickel in the environment. Moreover, strains of the genus Bacillus can also assist phytoremediation by stimulating plant growth and bioaccumulation of heavy metals in the soil. Therefore, Bacillus spp. is one of the best sustainable solutions for reducing heavy metals from various environments, especially soil. Full article

Green synthesis of gold nanoparticles (AuNPs) using microorganisms has been generally studied aiming for high-yield production and morphologies appropriated for various applications, such as bioremediation, (bio)sensors, and (bio)catalysis. Numerous approaches showed the individual effect of factors influencing the synthesis of AuNPs with limited analysis of the governing factors enhancing the production and desired quality of the precipitates. This study proposes a fractional-factorial design to investigate the simultaneous influence of seven environmental factors (cell concentration, temperature, anoxic/oxic conditions, pH, gold concentration, electron donor type, and bacterial species) on the recovery yield and synthesis of targeted AuNPs. Various sizes and morphologies of the AuNPs were obtained by varying the environmental factors studied. The factors with significant effects (i.e., 0.2 mM Au and pH 5) were selected according to statistical analysis for optimal removal of 88.2 ± 3.5% of gold and with the production of valuable 50 nm AuNPs, which are known for their enhanced sensitivity. Implications of the cytochrome-C on the bacterial mechanisms and the provision of electron donors via an electrochemical system are further discussed. This study helps develop gold recovery and nanoparticle synthesis methods, focusing on the determining factor(s) for efficient, low-cost, green synthesis of valuable materials. Full article

Microbial-induced mineralization deposition was used to improve the quality of the recycled fine aggregate (RFA) in this paper. In order to obtain a better improvement effect, the microbial mineralization conditions were first optimized. The effect of the pH value, temperature, bacterial concentration and calcium ion concentration on the mineralization ability of bacteria were investigated. The optimal microbial mineralization conditions were selected for the treatment of RFA and the microbial mineralization modification effect of RFA was evaluated based on the water absorption and crushing index. In addition, the natural fine aggregate (NFA), unmodified RFA and modified RFA were made into ordinary mortar, recycled mortar and modified recycled mortar, respectively. The workability, mechanical properties and chloride ion penetration resistance of mortars was investigated. Meanwhile, the precipitations formed by microbial mineralization were characterized using a scanning electron microscope (SEM) with an energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). The pore structure of mortars was analyzed using the mercury intrusion porosimeter (MIP). The results showed that the bioprecipitations were mainly calcite calcium carbonate and the quality of the RFA was improved by microbial-induced calcium carbonate deposition. The water absorption and crushing index of the modified RFA decreased by 25.7% and 4.2%, respectively. Compared with the crushing index, the water absorption of the RFA was improved more obviously. The workability, mechanical performance, chloride ion penetration resistance and pore structure of the modified recycled mortar was improved. Compared with the recycled mortar, the fluidity of the modified recycled mortar was 7.3% higher, the compressive strength of 28 d was 7.0% higher and the 6 h electric flux was 18.8% lower. The porosity of the ordinary mortar, recycled mortar and modified recycled mortar was 16.49%, 20.83% and 20.27%, respectively. The strengthening of the modified recycled mortar performance may be attributed to the improvement of the mortar microstructure due to the enhancement of the RFA quality after the biotreatment. Full article

Deterioration or crack formation in concrete elements is a phenomenon that cannot be easily avoided, and it has a high cost of repair. A modern technology that needs wider study is the use of the bio-precipitation of calcium carbonate using bacteria to increase a structures’ capacity. The current research presents an analytical study on self-healing concrete beams using bacteria to enhance the beam’s capacity. A Finite Element Analysis on (ANSYS 15.0) was carried out to study the effect of the bacteria concentration (the weight of bacteria to cement weight 1%, 2%, and 3%), the type of bacteria (Bacillus subtilis, E. coli, and Pseudomonas sps.), and the loading (a one-point load, a two-point load, and a distributed load on four points) on concrete beams. Two beams were chosen from previous experimental research and simulated on the ANSYS before carrying out our parametric study to verify the validity of our simulation. Following this, our parametric study was carried out on eight beams; each beam was loaded gradually up to failure. The results show that the optimum type of bacteria was the Bacillus subtilis, and that the bacteria concentration of 3% for Bacillus subtilis can increase the beam’s capacity by 20.2%. Also, we found that distributing the load to four points led to the increase of the beam’s capacity by 74.5% more than the beam with a one-point load. Full article

The study focused on determining the microbial precipitation abilities of bacterial strains that were isolated from an industrially obtained Pb(II)-resistant microbial consortium. Previous research has demonstrated the effectiveness of the consortium on the bioprecipitation and adsorption of Pb(II) from solution. The bioremediation of Pb(II) using microbial precipitation provides an alternative option for Pb(II) removal from wastewater. Both strains, Klebsiella pneumoniae and Paraclostridium bifermentans, were successfully isolated from the consortium obtained from a battery recycling plant in South Africa. The experiments were conducted over both 30 h and 5 d, providing insight into the short- and long-term precipitation abilities of the bacteria. Various initial concentrations of Pb(II) were investigated, and it was found that P. bifermentans was able to remove 83.8% of Pb(II) from solution with an initial Pb(II) concentration of 80 mg L${}^{-1}$, while K. pneumoniae was able to remove 100% of Pb(II) with the same initial Pb(II) concentration after approximately 5 d. With the same initial Pb(II) concentration, P. bifermentans was able to remove 86.1% of Pb(II) from solution, and K. pneumoniae was able to remove 91.1% of Pb(II) from solution after 30 h. The identities of the precipitates obtained for each strain vary, with PbS and Pb${}^0$ being the main species precipitated by P. bifermentans and PbO with either PbCl or Pb${}_3$(PO${}_4$)${}_2$ precipitated by K. pneumoniae. Various factors were investigated in each experiment, such as metabolic activity, nitrate concentration, residual Pb(II) concentration, extracellular and intracellular Pb(II) concentration and the precipitate identity. These factors provide a greater understanding of the mechanisms utilised by the bacteria in the bioprecipitation and adsorption of Pb(II). These results can be used as a step towards applying the process on an industrial scale. Full article

This study reports the synthesis of copper–zinc binary oxide coupled cadmium tungstate through a simple bio-precipitation method followed by calcination at 600 °C and its adsorption application. The characterization analysis reveals that the prepared composite has low particles size (nano-range), high porosity, and functional groups on the surface. The calcination of sample at 600 °C causes some essential function groups to disappear on the surface. Prepared composite was found to be effective adsorptive material to treat Congo red dye in aqueous solution. 2.5 g L⁻¹ dose of adsorbent could remove more than 99% Congo red dye from 10 mg L⁻¹ solution and more than 80% Congo red dye from 60 mg L⁻¹ aqueous solution. The maximum adsorption capacity of present adsorbent was calculated to be 19.6 mg Congo red per gram of adsorbent. Isotherms analysis suggested a physio-chemical adsorption process. Thermodynamic analysis revealed a exothermic and feasible adsorption process. Adsorption rate was well explained by pseudo second order kinetics. The rate determining step was intra-particle diffusion evaluated from the Weber-Morris plot. To assess the adsorption performance of present adsorbent for Congo red dye the partition coefficient and adsorption equilibrium capacity were compared with other adsorbents. The partition coefficient and adsorption equilibrium values for 10 mg L⁻¹ aqueous solution were found to be approximately 83.3 mg g⁻¹ µM⁻¹ and 4.0 mg g⁻¹ at 30 °C and 7.0 pH using 2.5 g L⁻¹ adsorbent. The value of partition coefficient was found to be higher than previous reported zinc oxide coupled cadmium tungstate having partition coefficient = as 21.4 mg g⁻¹ µM⁻¹ at 30 °C and 7.0 pH using 2.0 g L⁻¹ adsorbent. These results suggested that present adsorption technology is efficient for wastewater treatment. Full article

Manganese-oxidizing bacteria have been widely investigated for bioremediation of Mn-contaminated water sources and for production of biogenic Mn oxides that have extensive applications in environmental remediation. In this study, a total of 5 Mn-resistant bacteria were isolated from river water and investigated for Mn removal. Among them, Ochrobactrum sp. NDMn-6 exhibited the highest Mn removal efficiency (99.1%). The final precipitates produced by this strain were defined as a mixture of Mn₂O₃, MnO₂, and MnCO₃. Optimal Mn-removal performance by strain NDMn-6 was obtained at a temperature range of 25–30 °C and the salinity of 0.1–0.5%. More interestingly, strain NDMn-6 could be resistant to salinities of up to 5%, revealing that this strain could be possibly applied for Mn remediation of high salinity regions or industrial saline wastewaters. This study also revealed the potential of self-detoxification mechanisms, wherein river water contaminated with Mn could be cleaned by indigenous bacteria through an appropriate biostimulation scheme. Full article

This study presents the effect of aqueous Pb(II) and nutrient concentrations on the Pb(II)-removal, biomass viability, active species identities, and population distribution of an industrial Pb(II) resistant microbial consortium. The studied consortium has previously shown to be highly effective at precipitating Pb(II) from solution. At all conditions tested (80 and 500 ppm Pb(II), and varying nutrients conditions) it was found that circa 50% of Pb(II) was removed within the first 3 h, with the absence of any visual changes, followed by a slower rate of Pb(II) removal accompanied by the formation of a dark precipitate. The Pb(II) removal was found to be independent of microbial growth, while growth was observed dependent on the concentration of Pb(II), nutrients, and nitrates in the system. SEM analysis indicated viable bacilli embedded in precipitate. These findings indicate that precipitation occurs on the surface of the biomass as opposed to an internal excretion mechanism. BLAST (Basic Local Alignment Search Tool) results indicated Klebsiella pneumoniae as the active species responsible for Pb(II) bioprecipitation for both the 80 and 500 ppm isolated colonies, while a diverse population distribution of organisms was observed for the streak plate analyses. A quicker microbial generation rate was observed than what was expected for Klebsiella pneumoniae, indicating that the overall consortial population contributed to the growth rates observed. This study provided insights into the factors affecting Pb(II) bio-removal and bioprecipitation by the investigated industrially obtained consortium, thereby providing invaluable knowledge required for industrial application. Full article