Search Results (45)

Bacterial cellulose (BC) is a high-purity biopolymer with excellent physicochemical and mechanical properties, including high crystallinity, water absorption, biocompatibility, and structural tunability. However, its large-scale production is hindered by high substrate costs and limited sustainability. In this study, spent black tea waste was utilized as a low-cost and eco-friendly carbon source for BC synthesis by Komagataeibacter xylinus ATCC 53524 under varying initial pH conditions (4–9). Six different BC membranes were produced and systematically characterized in terms of mechanical strength, water absorption capacity, electrical conductivity, antimicrobial performance, and polyvinyl alcohol (PVA) attachment efficiency. Morphological and chemical analyses were conducted using SEM and FTIR techniques to investigate pH-induced structural variations. The results revealed that the BC6 sample (pH 6) exhibited the highest tensile strength (2.4 MPa), elongation (13%), PVA incorporation (12%), and electrical conductivity, confirming the positive impact of near-neutral conditions on nanofiber assembly and functional integration. In contrast, the BC4 sample (pH 4) demonstrated strong antimicrobial activity (log reduction = 3.5) against E. coli, suggesting that acidic pH conditions enhance bioactivity. SEM images confirmed the most cohesive and uniform fiber morphology at pH 6, while FTIR spectra indicated the preservation of characteristic cellulose functional groups across all samples. Overall, this study presents a sustainable and efficient strategy for BC production using food waste and demonstrates that synthesis pH is a key parameter in tuning its functional performance. The optimized BC membranes show potential for biomedical, flexible electronic, and antibacterial material applications, particularly in wearable electrode technologies. Full article

In this study, we explored the development and characterization of fungus-immobilized foamed bacterial cellulose (FBC) scaffolds using Pleurotus ostreatus and Aspergillus oryzae. FBC, a porous biomaterial with high structural integrity and resistance to enzymatic degradation, served as a three-dimensional matrix for fungal cultivation. The results indicated effective fungal immobilization, with the 1% A. oryzae-immobilized FBC group (FBC/1A) achieving the highest production yield. The water content (97%) and swelling behavior (95.9%) analyses revealed that P. ostreatus-immobilized FBC maintained high hydration levels and rehydration capacities, whereas A. oryzae immobilization led to slightly reduced water retention. Morphological assessments via SEM confirmed the presence of fungal-derived fibers integrated with native cellulose structures, suggesting successful immobilization. A thermogravimetric analysis demonstrated enhanced thermal stability in fungus-immobilized FBC, particularly in the A. oryzae group, while FTIR spectra suggested possible structural alterations induced by fungal activity. Collectively, these findings support the potential of fungal-immobilized FBC as a robust, biodegradable material with promising applications in biotechnology and sustainable material development. Full article

Bacterial cellulose (BC) is a highly pure and crystalline cellulose produced via bacterial fermentation. However, due to its chemical structure made of strong hydrogen bonds and its high molecular weight, BC can neither be melted nor dissolved by common solvents. Therefore, processing BC implies the use of very strong, often toxic and dangerous chemicals. In this study, we proved a green method to produce electrospun BC fibers by testing different ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium acetate (BmimAc), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EmimTFSI) and 1-ethyl-3-methylimidazolium dicyanamide (EmimDCA), either individually or as binary mixtures. Moreover, γ-valerolactone (GVL) was tested as a co-solvent derived from renewable sources to replace dimethyl sulfoxide (DMSO), aimed at making the viscosity of the cellulose solutions suitable for electrospinning. A BmimAc and BmimAc/EmimTFSI (1:1 w/w) mixture could dissolve BC up to 3 w%. GVL was successfully applied in combination with BmimAc as an alternative to DMSO. By optimizing the electrospinning parameters, meshes of continuous BC fibers, with average diameters ~0.5 μm, were produced, showing well-defined pore structures and higher water absorption capacity than pristine BC. The results demonstrated that BC could be dissolved and electrospun via a BmimAc/GVL solvent system, obtaining ultrafine fibers with defined morphology, thus suggesting possible greener methods for cellulose processing. Full article

Bacterial cellulose (BC) is a versatile biopolymer prized for its remarkable water absorption, nanoscale fiber architecture, mechanical robustness, and biocompatibility, making it suitable for diverse applications. Despite its potential, the high cost of conventional fermentation media limits BC’s scalability and wider commercial use. This study investigates an economical solution by utilizing fractions from fruit processing wastewater, refined through sequential membrane fractionation, as a supplement to commercial HS medium for BC production. BC films were thoroughly characterized using Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and assessments of mechanical properties and water holding capacity (WHC). FTIR confirmed the BC structure, while TEM validated its nanofibrillar 3D network. XRD analysis revealed a slight increasing trend in crystallinity with the addition of wastewater fractions, and DSC revealed a slight increase in thermal stability for F#6. Adding these fractions notably improved the BC films’ tensile strength, Young’s modulus, and WHC. Overall, the results underscore that fruit processing wastewater fractions can serve as a cost-efficient, eco-friendly alternative to traditional fermentation media. This approach supports circular economy principles by lowering reliance on intensive wastewater treatments, promoting waste valorization, and advancing sustainable production methods for high-value biopolymers. Full article

Polymer matrices can be reinforced with cellulose fillers in a variety of geometric shapes. Depending on the morphology of the particles, the volume fraction of the composite additive may decrease, while the values of the elastic modulus may increase. Increasing the length while decreasing the width of the cellulose filler is an intriguing path in the development of composite additives and materials based on it. It is difficult to form thin continuous cellulose fibers, but this can be accomplished via the sea-island composite fiber manufacturing process. The creation of cellulose fibrils in polyacrylonitrile (PAN)/cellulose based systems happens during the spinning of the mixed solution. A selective solvent facilitates the isolation of cellulose fibrils. The structure of the isolated microfibers was investigated using X-ray diffraction, IR spectroscopy, SEM, and AFM. The structure of the resulting cellulose microfibers was compared to bacterial cellulose. It has been shown that composite fibers have a superposition pattern, while cellulose fibrils have a structure different from native cellulose and similar to Lyocell fibers (polymorph II). The crystallite sizes and crystallinity of regenerated cellulose were determined. The identified structural parameters for cellulose fibrils provide strength at the level of industrial hydrated cellulose fibers. Full article

Nano-fibrillated bacterial cellulose (NFBC) has very long fibers (>17 μm) with diameters of approximately 20 nm. Hence, they have a very high aspect ratio and surface area. The high specific surface area of NFBC can potentially be utilized as an adsorbent. However, NFBC has no functional groups that can bind metal ions, limiting its potential applications. In this study, the hydroxyl groups on the surface of NFBC were chemically modified with EDTA monoanhydride to convert NFBC into a metal adsorbent. The fiber morphology and crystal structures of the modified NFBC were almost identical to those of the unmodified NFBC, suggesting that the surface hydroxyl groups of NFBC were well-conjugated with the EDTA groups. Surface-modified NFBC preferentially adsorbed transition metals in aqueous solutions, such as Cu(II), Hg(II), Pb(II), and Cd(II), but hardly adsorbed Mg(II) and Cr(VI). The adsorption of heavy metal ions can be explained by the pseudo-second-order kinetics of the chemisorption process and the Langmuir isotherm model. Furthermore, the EDTA-modified NFBC is a renewable and recyclable adsorbent. The results of this study indicate that surface-modified NFBC can be utilized as a biosorbent for heavy metal removal in chemical, food, pharmaceutical, and other industrial fields. Full article

To reduce the risk of adsorption of granular activated carbon (AC) in the gastrointestinal tract, we successfully prepared a hollow-type spherical bacterial cellulose gel encapsulated with AC (ACEG) and evaluated its pH tolerance and adsorption capacity. The bacterial cellulose gel membrane of ACEG features a three-dimensional mesh structure of cellulose fibers, allowing the selective permeation of substances based on their size. In this study, the preparation method of ACEGs was investigated, and the indole saturation adsorption capacity of the obtained gel was measured. We modified the gel culture nucleus gel from calcium alginate gel to agar gel, facilitating the encapsulation of previously challenging particles. The new preparation method used sodium hydroxide solution for sterilization and dissolution to remove the debris of Komagataeibacter xylinus, which was feared to remain in the bacterial cellulose membrane. This treatment was also confirmed to have no effect on the adsorption capacity of the AC powder. Therefore, this new preparation method is expected not only to improve the performance of ACEGs but also to be applied to a wide range of adsorbent-encapsulated hollow-type bacterial cellulose gels. Full article

In this study, hydrogel films of biocomposite comprising bacterial cellulose (BC) and silk (S) were successfully fabricated through a simple, facile, and cost-effective method via biosynthesis by Acetobacter xylinum in a culture medium of coconut skim milk/mature coconut water supplemented with the powders of thin-shell silk cocoon (SC). Coconut skim milk/mature coconut water and SC are the main byproducts of coconut oil and silk textile industries, respectively. The S/BC films contain protein, carbohydrate, fat, and minerals and possess a number of properties beneficial to wound healing and tissue engineering, including nontoxicity, biocompatibility, appropriate mechanical properties, flexibility, and high water absorption capacity. It was demonstrated that silk could fill into a porous structure and cover fibers of the BC matrix with very good integration. In addition, components (fat, protein, etc.) in coconut skim milk could be well incorporated into the hydrogel, resulting in a more elastic structure and higher tensile strength of films. The tensile strength and the elongation at break of BC film from coconut skim milk (BCM) were 212.4 MPa and 2.54%, respectively, which were significantly higher than BC film from mature coconut water (BCW). A more elastic structure and relatively higher tensile strength of S/BCM compared with S/BCW were observed. The films of S/BCM and S/BCW showed very high water uptake ability in the range of 400–500%. The presence of silk in the films also significantly enhanced the adhesion, proliferation, and cell-to-cell interaction of Vero and HaCat cells. According to multiple improved properties, S/BC hydrogel films are high-potential candidates for application as biomaterials for wound dressing and tissue engineering. Full article

The biosynthesis of bacterial cellulose (BC) is significantly influenced by the type of carbon source available in the growth medium, which in turn dictates the material’s final properties. This study systematically investigates the effects of five carbon sources—raffinose (C₁₈H₃₂O₁₆), sucrose (C₁₂H₂₂O₁₁), glucose (C₆H₁₂O₆), arabinose (C₅H₁₀O₅), and glycerol (C₃H₈O₃)—on BC production by Komagataeibacter hansenii. The varying molecular weights and structural characteristics of these carbon sources provide a framework for examining their influence on BC yield, fiber morphology, and network properties. BC production was monitored through daily measurements of optical density and pH levels in the fermentation media from day 1 to day 14, providing valuable insights into bacterial growth kinetics and cellulose synthesis rates. Scanning electron microscopy (SEM) was used to elucidate fibril diameter and pore size distribution. Wide-angle X-ray scattering (WAXS) provided a detailed assessment of crystallinity. Selected BC pellicles were further processed via freeze-drying to produce a foam-like material that maximally preserves the natural three-dimensional structure of BC, facilitating the incorporation and release of lidocaine hydrochloride (5%), a widely used local anesthetic. The lidocaine-loaded BC foams exhibited a sustained and controlled release profile over 14 days in simulated body fluid, highlighting the importance of the role of carbon source selection in shaping the BC network architecture and its impact on drug release profile. These results highlight the versatility and sustainability of BC as a platform for wound healing and drug delivery applications. The tunable properties of BC networks provide opportunities for optimizing therapeutic delivery and improving wound care outcomes, positioning BC as an effective material for enhanced wound management strategies. Full article

The high consumption of packaging has led to a massive production of waste, especially in the form of nonbiodegradable polymers that are difficult to recycle. Microbial cellulose is considered a biodegradable, low-cost, useful, ecologically correct polymer that may be joined with other biomaterials to obtain novel characteristics and can, therefore, be used as a raw material to produce packaging. Bagasse, a waste rich in plant cellulose, can be reprocessed and used to produce and reinforce other materials. Based on these concepts, the aim of the current research was to design sustainable packaging material composed of bacterial cellulose (BC) and sugarcane bagasse (SCB), employing an innovative shredding and reconstitution method able to avoid biomass waste. This method enabled creating a uniform structure with a 0.10-cm constant thickness, classified as having high grammage. The developed materials, particularly the 0.7 BC/0.3 SCB [70% (w/w) BC plus 30% (w/w) SCB] composite, had considerable tensile strength (up to 46.22 MPa), which was nearly thrice that of SCB alone (17.43 MPa). Additionally, the sorption index of the 0.7 BC/0.3 SCB composite (235.85 ± 31.29 s) was approximately 300-times higher than that of SCB (0.78 ± 0.09 s). The packaging material was also submitted to other analytical tests to determine its physical and chemical characteristics, which indicated that it has excellent flexibility and can be folded 100 times without tearing. Its surface was explored via scanning electron microscopy, which revealed the presence of fibers measuring 83.18 nm in diameter (BC). Greater adherence after the reconstitution process and even a uniform distribution of SCB fibers in the BC matrix were observed, resulting in greater tear resistance than SCB in its pure form. The results demonstrated that the composite formed by BC and SCB is promising as a raw material for sustainable packaging, due to its resistance and uniformity. Full article

Metal–Organic Frameworks (MOFs) are particularly attractive sorbents with great potential for the removal of toxic dye pollutants from industrial wastewaters. The uniform dispersion of MOF particles on suitable substrates then represents a key condition to improve their processability and provide good accessibility to the active sites. In this work, we investigate the efficiency of a natural bacterial cellulose material derived from Kombucha (KBC) as an active functional support for growing and anchoring MOF particles with UiO-66 structures. An original hierarchical microstructure was obtained for the as-developed Kombucha cellulose/UiO-66 (KBC-UiO) composite material, with small MOF crystals (~100 nm) covering the cellulose fibers. Promising adsorption properties were demonstrated for anionic organic dyes such as fluorescein or bromophenol blue in water at pH 5 and pH 7 (more than 90% and 50% removal efficiency, respectively, after 10 min in static conditions). This performance was attributed to both the high accessibility and uniform dispersion of the MOF nanocrystals on the KBC fibers together with the synergistic effects involving the attractive adsorbing properties of UiO-66 and the surface chemistry of KBC. The results of this study provide a simple and generic approach for the design of bio-sourced adsorbents and filters for pollutants abatement and wastewater treatment. Full article

Carbon aerogels represent a distinctive category of high surface area materials derived from sol-gel chemistry. Functionalizing these aerogels has led to the development of composite aerogels with the potential for a wider range of applications. In this study, the technique of lyophilization was employed to fabricate aerogel composites consisting of inorganic salts and cellulosic fibers. Cellulose carbonization can occur through chemical dehydration by heat treatment in an inert atmosphere. X-ray diffraction analysis spectra and scanning electron microscopy images indicate that the formed polymeric composites contain partially carbonized cellulose fibers, amorphous carbon, and calcium carbonates. CaCO₃ primarily forms through the reaction of CaCl₂, which moistens cellulose or amorphous carbon fibers with CO₂ in ammonia fumes. The water loss in 3D structures was analyzed using thermogravimetric analysis, Fourier Transform Infrared Spectroscopy, and ultraviolet-visible-near-infrared spectroscopy. Depending on the synthesis method, 3D structures can be created from partially or completely dehydrated cellulose fibers. The aerogels were examined for their ability to support the growth of bacterial biofilm and then adorned with metal silver and AgCl to produce bactericidal products. Due to their open pores and CaCO₃ content, these aerogels can serve as durable and environmentally friendly thermal insulators with bactericidal properties, as well as a medium for absorbing acidic gases. Full article

Bacterial cellulose is a biocompatible biomaterial with a unique macromolecular structure. Unlike plant-derived cellulose, bacterial cellulose is produced by certain bacteria, resulting in a sustainable material consisting of self-assembled nanostructured fibers with high crystallinity. Due to its purity, bacterial cellulose is appealing for biomedical applications and has raised increasing interest, particularly in the context of 3D printing for tissue engineering and regenerative medicine applications. Bacterial cellulose can serve as an excellent bioink in 3D printing, due to its biocompatibility, biodegradability, and ability to mimic the collagen fibrils from the extracellular matrix (ECM) of connective tissues. Its nanofibrillar structure provides a suitable scaffold for cell attachment, proliferation, and differentiation, crucial for tissue regeneration. Moreover, its mechanical strength and flexibility allow for the precise printing of complex tissue structures. Bacterial cellulose itself has no antimicrobial activity, but due to its ideal structure, it serves as matrix for other bioactive molecules, resulting in a hybrid product with antimicrobial properties, particularly advantageous in the management of chronic wounds healing process. Overall, this unique combination of properties makes bacterial cellulose a promising material for manufacturing hydrogels and 3D-printed scaffolds, advancing the field of tissue engineering and regenerative medicine. Full article

Cellulose nitrates (CNs)-blended composites based on celluloses of bacterial origin (bacterial cellulose (BC)) and plant origin (oat-hull cellulose (OHC)) were synthesized in this study for the first time. Novel CNs-blended composites made of bacterial and plant-based celluloses with different BC-to-OHC mass ratios of 70/30, 50/50, and 30/70 were developed and fully characterized, and two methods were employed to nitrate the initial BC and OHC, and the three cellulose blends: the first method involved the use of sulfuric–nitric mixed acids (MAs), while the second method utilized concentrated nitric acid in the presence of methylene chloride (NA + MC). The CNs obtained using these two nitration methods were found to differ between each other, most notably, in viscosity: the samples nitrated with NA + MC had an extremely high viscosity of 927 mPa·s through to the formation of an immobile transparent acetonogel. Irrespective of the nitration method, the CN from BC (CN BC) was found to exhibit a higher nitrogen content than the CN from OHC (CN OHC), 12.20–12.32% vs. 11.58–11.60%, respectively. For the starting BC itself, all the cellulose blends of the starting celluloses and their CNs were detected using the SEM technique to have a reticulate fiber nanostructure. The cellulose samples and their CNs were detected using the IR spectroscopy to have basic functional groups. TGA/DTA analyses of the starting cellulose samples and the CNs therefrom demonstrated that the synthesized CN samples were of high purity and had high specific heats of decomposition at 6.14–7.13 kJ/g, corroborating their energy density. The CN BC is an excellent component with in-demand energetic performance; in particular, it has a higher nitrogen content while having a stable nanostructure. The CN BC was discovered to have a positive impact on the stability, structure, and energetic characteristics of the composites. The presence of CN OHC can make CNs-blended composites cheaper. These new CNs-blended composites made of bacterial and plant celluloses are much-needed in advanced, high-performance energetic materials. Full article

In this study, nanochitosan dots (ChiDs) were synthesized using gamma rays and encapsulated in bacterial cellulose (BC) polymer matrix for antibiofilm potential in photodynamic therapy. The composites were analyzed for structural changes using SEM, AFM, FTIR, XRD, EPR, and porosity measurements. Additionally, ChiD release was assessed. The results showed that the chemical composition remained unaltered, but ChiD agglomerates embedded in BC changed shape (1.5–2.5 µm). Bacterial cellulose fibers became deformed and interconnected, with increased surface roughness and porosity and decreased crystallinity. No singlet oxygen formation was observed, and the total amount of released ChiD was up to 16.10%. Antibiofilm activity was higher under green light, with reductions ranging from 48 to 57% under blue light and 78 to 85% under green light. Methicillin-resistant Staphylococcus aureus was the most sensitive strain. The new photoactive composite hydrogels show promising potential for combating biofilm-related infections. Full article