Search Results (142)

Hydrophilic modification of polymeric membranes by employing TiO₂ nanoparticles has attracted much attention in enhancing antifouling performance. Micelles of PVPylated-TiO₂ nanoparticles were designed to alleviate the agglomeration of TiO₂ nanoparticles via steric hindrance and electrostatic stabilization effect. Herein, Poly(vinyl pyrrolidone) (PVP) was used as a surfactant to mitigate the thorny agglomeration of nanoparticles in the casting solution and simultaneously as a pore-forming additive during the membrane preparation process. The lowest backscattering (BS) peak and turbiscan stability index (TSI) of the composite casting solution indicated the effective dispersion and stabilization under the steric interaction of 4 wt.% PVP. Properties such as the fully developed finger-like structure of cross-sectional morphologies, water permeability, negative Zeta potential, and hydrophilicity were enhanced evidently by the optimal modification of PVPylated-TiO₂ materials. High interaction energy indicated by classic extended Derjaguin–Landau–Verwey–Overbeek (XDLVO) theory as well as the high relative flux during the filtration of various model foulants demonstrated the effective antifouling modification. The results of critical flux and fouling rate in 30 min also verified the enhancement of the antifouling performance of PVDF/PVPylated-TiO₂ composite membrane. This work provides a feasible strategy to construct composite membranes with high antifouling performance for wastewater treatment. Full article

Polysulfone (PSU) membranes are widely recognized for their thermal stability, mechanical strength, and chemical resistance, making them suitable for diverse separation applications. This review highlights recent advances in PSU membrane development, focusing on fabrication techniques, structural modifications, and emerging applications. Phase inversion remains the predominant method for membrane synthesis, allowing precise control over morphology and performance. Functional enhancements through blending, chemical grafting, and incorporation of nanomaterials—such as metal–organic frameworks (MOFs), carbon nanotubes, and zwitterionic polymers—have significantly improved gas separation, and water purification., In gas separation, PSU-based mixed matrix membranes demonstrate enhanced CO₂/CH₄ selectivity, particularly when integrated with MOFs like ZIF-7 and ZIF-8. In water treatment, PSU membranes effectively remove algal toxins and heavy metals, with surface modifications improving hydrophilicity and antifouling properties. Despite these advancements, challenges remain in optimizing cross-linking strategies and understanding structure–property relationships. This review provides a comprehensive overview of PSU membrane technologies and outlines future directions for their development in sustainable and high-performance separation systems. Full article

To address the issues of hydrophobicity, easy fouling, and limited application of polyvinylidene fluoride (PVDF) membranes in water treatment processes, this study prepared Cu-MnO₂/GO/PVDF catalytic membranes via the immersion precipitation phase inversion method. Graphene oxide (GO) was incorporated to facilitate the construction of good water channels, while copper-doped manganese dioxide (Cu-MnO₂) was added to enhance catalytic activity. The structure, morphology, and performance of the membranes were characterized comprehensively. Results showed that Cu-MnO₂ was well interspersed between GO sheets, thereby increasing membrane surface roughness, effective filtration area, and hydrophilicity. The best catalytic membrane CM-5 exhibited the highest pure water flux (1391.20 L·m⁻²·h⁻¹) and methyl blue (MBE) rejection rate (98.06%), and it also displayed excellent reusability and stability. EPR tests confirmed the generation of HO· and HOO· in the Fenton-like system, which mediated dye degradation. The Cu-MnO₂/GO/PVDF catalytic membrane demonstrated excellent hydrophilicity, antifouling properties, and catalytic efficiency, thus providing a viable solution for dye wastewater treatment. Full article

Due to industrialization and globalization, water sources are increasingly contaminated with drugs. Among the various methods available, adsorption remains one of the most widely used techniques for drug removal. This work was to develop polysulfone (PSF) membranes integrated with montmorillonite (MMT) clay. The fabricated membranes were subsequently evaluated for their performance in removing diclofenac (DCF) from aqueous solutions. The membranes were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), contact angle measurements, as well as chemical and mechanical tests. Adding MMT at 1.5 and 2 wt% improved both hydrophilicity and mechanical strength. The natural hydrophilicity of MMT also accelerates the non-solvent/solvent exchange during phase inversion, resulting in higher porosity. These structural and surface modifications increased water permeability (16.36 L·m⁻²·h⁻¹·bar⁻¹), achieved 79% DCF removal, and enhanced antifouling properties. However, increasing the MMT clay content to 2.5 wt% caused particle aggregation, which reduced membrane performance. Fouling resistance tests with bovine serum albumin (BSA) as a model foulant showed a rejection rate of 89% and a flux recovery ratio (FRR) above 82% using an optimized membrane. These findings demonstrate that PSF/MMT membranes can serve as promising candidates for sustainable pharmaceutical wastewater treatment. Full article

Wastewater nitrogen pollution is a serious environmental problem, and traditional treatment techniques are frequently constrained by their high energy requirements and operational complexity. The anaerobic ammonium oxidation (anammox) process combined with membrane bioreactor (MBR) technology (anammox-MBR) offers a practical and energy-efficient solution for the sustainable removal of nitrogen, further enhanced by its potential to minimize emissions of nitrous oxide (N₂O), a potent greenhouse gas with a global warming potential nearly 300 times that of carbon dioxide. This review outlines the most recent advancements in anammox-MBR systems, highlighting their ability to achieve nitrogen removal efficiencies of more than 70–90% and, in integrated systems with reverse osmosis, to recover up to 75% of the inflow as high-quality reusable water. Significant advancements such as high-rate activated sludge coupling, reverse osmosis integration, microaeration methods, and membrane surface modifications have decreased membrane fouling, accelerated startup times, and enhanced system stability. Despite these achievements, there are still issues that hinder widespread use, such as membrane fouling exacerbated by hydrophobic anammox metabolites, sensitivity to low temperatures (≤10 °C), and the persistent challenge of suppressing nitrite-oxidizing bacteria (NOB), which compete for the essential nitrite substrate. To enable cost-effective, energy-efficient, and environmentally sustainable large-scale applications, future research directions will focus on creating cold-tolerant anammox strains, advanced anti-fouling membranes, and AI-driven process optimization. Full article

Membrane separation is a promising technology for emulsified wastewater treatment. However, conventional membrane often suffer from limitations such as low mechanical strength, the inherent “trade-off” effect between flux and separation efficiency, and poor antifouling properties. To address these challenges, we report a novel composite membrane (CFM-UiO-66-(COOH)₂) fabricated by in situ growth of functionalized UiO-66-(COOH)₂ on a mechanically robust collagen fiber membrane (CFM) substrate. The resulting composite leverages the inherent properties of the CFM, along with the controlled generation of charge-neutralization demulsification sites and size-sieving filtration layers from the UiO-66-(COOH)₂. This CFM-UiO-66-(COOH)₂ exhibited superwetting behavior and achieved efficient separation of cationic surfactant-stabilized oil-in-water micro- and nano-emulsions. Specifically, the CFM-UiO-66-(COOH)₂ achieved separation efficiencies exceeding 99.85% for various cationic O/W emulsions, with permeation fluxes ranging from 178.9 to 225.9 L·m⁻²·h⁻¹. The membrane also demonstrated robust antifouling properties, excellent acid/alkali resistance, high abrasion durability, and good biocompatibility. Importantly, stable performance was maintained over six consecutive separation cycles. These characteristics, combined with the electrostatic interactions between carboxyl groups on the UiO-66-(COOH)₂ and cationic contaminants, suggest that CFM-UiO-66-(COOH)₂ holds significant potential for practical and sustainable wastewater treatment applications. Full article

The treatment of oily wastewater poses a significant environmental challenge, creating a demand for advanced separation technologies. Membrane technologies, especially ultrafiltration (UF), offer a promising solution. A novel composite polyvinylidene fluoride (PVDF) and polypyrrole (PPy) membrane was created via an in situ polymerization method, which enhances the membrane’s functionality by combining the chemical stability of PVDF with the outstanding properties of PPy, through a simple two-step process that decreases manufacturing costs. The PPy content in the PVDF matrix varies from 0 to 1.5 wt%. The membranes were analyzed for their structure, morphology, hydrophilicity, porosity, mechanical strength, flux, oil rejection, and antifouling performance. Fourier-transform infrared spectroscopy (FTIR) confirmed the successful integration of PPy, which increased hydrophilicity; the contact angle dropped from 68° for pure PVDF to 55.6° at a 1.5% PPy concentration. Scanning electron microscopy (SEM) images showed an evident increase in surface porosity and macrovoid formation; calculated porosity increased from 59.5% to 79.9%, and the hydraulic pore size increased from 2.8 nm to 28.5 nm with 1.5% PPy. Although porosity improved, mechanical strength decreased due to the formation of voids. The enhancement in hydrophilicity and porosity resulted in improved flux recovery (FR), with the PP-1 membrane achieving 93% FR and 93% fouling resistance (Rt), indicating an optimal balance for practical use. These modified membranes successfully reduce fouling, making them easier to clean in oil–water separation applications. PP-1 showed only a reduction in flux but maintained an oil rejection rate over 99%, demonstrating high stability. This combination of PVDF’s durability and PPy’s functionality makes a cost-effective, high-performance membrane that transforms oil/water separation processes for sustainable water security. Full article

The inherent hydrophobicity of poly(vinylidene fluoride) (PVDF) ultrafiltration membranes leads to severe membrane fouling when processing proteinaceous solutions and organic contaminants, significantly limiting their practical applications. This study presents a novel metal-ion mediated co-deposition strategy for fabricating high-performance antifouling poly(vinylidene fluoride) (PVDF) hollow fiber ultrafiltration membranes. Through Zn²⁺ coordination-driven self-assembly, a uniform and stable composite coating of dopamine (DA), tannic acid (TA), and ZIF-8 nanoparticles was successfully constructed on the membrane surface under mild conditions. The modified membrane exhibited significantly enhanced hydrophilicity, with a water contact angle of 21° and zeta potential of −29.68 mV, facilitating the formation of a dense hydration layer that effectively prevented protein adhesion. The membrane demonstrated exceptional separation performance, achieving a pure water permeability of 771 L/(m²∙h∙bar) and bovine serum albumin (BSA) rejection of 97.7%. Furthermore, it showed outstanding antifouling capability with flux recovery rates exceeding 83.6%, 74.7%, and 71.5% after fouling by BSA, lysozyme, and ovalbumin, respectively. xDLVO analysis revealed substantially increased interfacial free energy and stronger repulsive interactions between the modified surface and protein foulants. The antifouling mechanism was attributed to the synergistic effects of hydration layer formation, optimized pore structure, additional water transport pathways from ZIF-8 incorporation, and electrostatic repulsion from negatively charged surface groups. This work provides valuable insights into the rational design of high-performance antifouling membranes for sustainable water treatment and protein separation applications. Full article

Industrial processes like farming, food processing, petroleum refinery, and leather manufacturing produce a lot of high-salinity wastewater. This wastewater presents serious environmental risks, such as soil degradation, eutrophication, and water salinization, if it is released without adequate treatment. The sources and features of high-salinity wastewater are outlined in this review, along with the main methods for removing organic pollutants, such as physicochemical, biological, and combined treatment approaches. Membrane separation, coagulation–flocculation, and advanced oxidation processes are the primary physicochemical techniques. Anaerobic and aerobic technologies are the two categories into which biological treatments fall. Physicochemical–biological combinations and the fusion of several physicochemical techniques are examples of integrated technologies. In order to achieve sustainable and effective treatment and resource recovery of high-salinity wastewater, this review compares the effectiveness and drawbacks of each method and recommends that future research concentrate on the development of salt-tolerant catalysts, anti-fouling membrane materials, halophilic microbial consortia, and optimized hybrid treatment systems. Full article

Produced water, a byproduct of oil and gas extraction, poses significant environmental challenges due to its complex composition and high salinity. Conventional treatment technologies often struggle to achieve efficient contaminant removal while maintaining long-term operational stability. Membrane-based separation processes, particularly forward osmosis (FO), offer a promising alternative due to their low hydraulic pressure requirements, high selectivity, and ability to mitigate fouling and scaling effects. This study fabricated and evaluated a novel dual-layer zwitterion-modified electrospun nanofibrous membrane for enhanced produced water (PW) treatment. The dual-layer design consists of a highly porous electrospun nanofibrous support layer for improved permeability and mechanical strength, coupled with a zwitterionic-modified selective layer to enhance antifouling properties and selective contaminant rejection. The zwitterionic surface modification imparts superior hydration capacity, reducing organic and biological fouling while improving water transport efficiency. The membranes are characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), contact angle and tensile strength measurements, and nuclear magnetic resonance (NMR) spectroscopy to assess their morphological, structural, and chemical properties. The performance evaluations demonstrated significantly higher water flux (up to 16.05 L m⁻² h⁻¹ for SPW (synthetic produced water) and 6.00 L m⁻² h⁻¹ for PW using NaBr) and excellent solid rejection (up to 96.02% for SPW and 88.90% for PW), reduced concentration polarization, and superior antifouling performance compared to conventional FO membranes. Experimental results from bench-scale trials demonstrate that this advanced membrane technology offers enhanced water recovery and contaminant removal efficiency, making it a viable solution for industrial-scale PW treatment and reuse. The findings underscore the potential of next-generation dual-layer FO membranes in promoting sustainable water resource management within the oil and gas sector while minimizing environmental impact. Full article

The growing scarcity of freshwater worldwide has increased interest in forward osmosis (FO) membranes as a promising solution for water desalination and wastewater treatment. This study investigates the enhancement of thin-film composite (TFC) FO membranes via the incorporation of carboxyl-functionalized multiwalled carbon nanotubes (COOH-MWCNTs) into the polyethersulfone (PES) support layer. The membranes were fabricated using a combination of phase inversion and interfacial polymerization techniques, with COOH-MWCNTs incorporated into the membrane support layers at different concentrations (0–0.75 wt.%). Comprehensive characterization was carried out using various analytical methods and mechanical testing to evaluate the physicochemical and structural properties of the membranes. The modified membranes demonstrated improved hydrophilicity, enhanced mechanical and thermal stability, and improved surface charge properties. Performance tests using a 1 M NaCl draw solution showed that the optimized membrane (0.5 wt.% COOH-MWCNTs) attained a 161% enhancement in water flux (7.48 LMH) compared to the unmodified membrane (2.86 LMH), while also reducing internal concentration polarization (ICP). The antifouling properties were also significantly improved, with a flux recovery rate of 91.92%, attributed to enhanced electrostatic repulsion as well as surface and microstructural modifications. Despite a moderate rise in reverse solute flux, the specific reverse solute flux (J_s/J_w) remained within acceptable limits. These findings highlight the potential of COOH-MWCNT-modified membranes in enhancing FO desalination performance, offering a promising option for next-generation water purification technologies. Full article

Municipal wastewaters pose a severe risk to the environment and human health when discharged untreated. This is due to their high content of pathogens, such as viruses and bacteria, which can cause diseases like cholera. Herein, the research and development of porphyrin-modified polyethersulfone (PES) ultrafiltration (UF) membranes was conducted to improve bacterial inactivation in complex municipal wastewater and enhance the fouling resistance and filtration performance. The synthesis and fabrication of porphyrin nanofillers and the resultant membrane characteristics were studied. The incorporation of porphyrin-based nanofillers improved the membrane’s hydrophilicity, morphology, and flux (247 Lm⁻² h⁻¹), with the membrane contact angle (CA) decreasing from 90° to ranging between 58° and 50°. The membrane performance was monitored for its flux, antifouling properties, reusability potential, municipal wastewater, and humic acid. The modified membranes demonstrated an effective application in wastewater treatment, achieving notable antibacterial activity, particularly under light exposure. The In-BP@SW/PES membrane demonstrated effective antimicrobial photodynamic effects against both Gram-positive S. aureus and Gram-negative E. coli. It achieved at least a 3-log reduction in bacterial viability, meeting Food and Drug Administration (FDA) standards for efficient antimicrobial materials. Among the variants tested, membranes modified with In-PB@SW nanofillers exhibited superior antifouling properties with flux recovery ratios (FRRs) of 78.9% for the humic acid (HA) solution and 85% for the municipal wastewater (MWW), suggesting a strong potential for long-term filtration use. These results highlight the promise of porphyrin-functionalized membranes as multifunctional tools in advanced water treatment technologies. Full article

Current work investigates the fabrication and performance of nanocomposite membranes, modified with varying concentrations of hybrid nanostructures comprising titanium nanowires coated with iron nanoparticles (TiO₂ NWs-Fe₂O₃), for the removal of Naphthol Blue Black (NBB) dye from industrial wastewater. A series of analytical tools were employed to confirm the successful modification including scanning electron microscopy and EDX analysis, porosity and hydrophilicity measurements, Fourier-transform infrared spectroscopy, and X-Ray Diffraction. The incorporation of TiO₂ NWs-Fe₂O₃ has enhanced membrane performance significantly by increasing the PWF and improving dye retention rates of nanocomposite membranes. At 0.7 g of nanostructure content, the modified membrane (M8) achieved a PWF of 93 L/m²·h and NBB dye rejection of over 98%. The flux recovery ratio (FRR) analysis disclosed improved antifouling properties, with the M8 membrane demonstrating a 73.4% FRR. This study confirms the potential of TiO₂ NWs-Fe₂O₃-modified membranes in enhancing water treatment processes, offering a promising solution for industrial wastewater treatment. These outstanding results highlight the potential of the novel PES-TiO₂ NWs-Fe₂O₃ membranes for dye removal and present adequate guidance for the modification of membrane physical properties in the field of wastewater treatment. Full article

Access to clean water is a pressing global concern and membrane technologies play a vital role in addressing this challenge. Thin-film composite membranes prepared via interfacial polymerization (IPol) using meta-phenylenediamine (MPD) and trimesoyl chloride (TMC) exhibit excellent separation performance, but face limitations such as fouling and low hydrophilicity. This study investigated the interaction between MPD and sulfonated zinc phthalocyanine, Zn(SO₂⁻)₄Pc, as a potential strategy for enhancing membrane properties. Using Density Functional Theory (DFT) and Time-Dependent DFT (TD-DFT), we analyzed the optimized geometries, electronic structures, UV–Vis absorption spectra, FT-IR vibrational spectra, and molecular electrostatic potentials of MPD, Zn(SO₂⁻)₄Pc, and their complexes. The results show that MPD/Zn(SO₂⁻)₄Pc exhibits reduced HOMO-LUMO energy gaps and enhanced charge delocalization, particularly in aqueous environments, indicating improved stability and reactivity. Spectroscopic features confirmed strong interactions via hydrogen bonding and π–π stacking, suggesting that Zn(SO₂⁻)₄Pc can act as a co-monomer or additive during IPol to improve polyamide membrane functionality. A conformational analysis of MPD/Zn(SO₂⁻)₄Pc was conducted using density functional theory (DFT) to evaluate the impact of dihedral rotation on molecular stability. The 120° conformation was identified as the most stable, due to favorable π–π interactions and intramolecular hydrogen bonding. These findings offer computational evidence for the design of high-performance membranes with enhanced antifouling, selectivity, and structural integrity for sustainable water treatment applications. Full article

In accordance with growing environmental pressures and the demand for sustainable industrial practices, membrane technologies have emerged as key enablers for increasing efficiency, reducing emissions, and supporting circular processes across multiple sectors. This review focuses on the integration among microalgae-based systems, offering innovative and sustainable solutions for biomass production, carbon capture, and industrial wastewater treatment. In cultivation, membrane photobioreactors (MPBRs) have demonstrated biomass productivity up to nine times greater than that of conventional systems and significant reductions in water (above 75%) and energy (approximately 0.75 kWh/m³) footprints. For carbon capture, hollow fiber membranes and hybrid configurations increase CO₂ transfer rates by up to 300%, achieving utilization efficiencies above 85%. Coupling membrane systems with industrial effluents has enabled nutrient removal efficiencies of up to 97% for nitrogen and 93% for phosphorus, contributing to environmental remediation and resource recovery. This review also highlights recent innovations, such as self-forming dynamic membranes, magnetically induced vibration systems, antifouling surface modifications, and advanced control strategies that optimize process performance and energy use. These advancements position membrane-based microalgae systems as promising platforms for carbon-neutral biorefineries and sustainable industrial operations, particularly in the oil and gas, mining, and environmental technology sectors, which are aligned with global climate goals and the UN Sustainable Development Goals (SDGs). Full article