Search Results (1,727)

There is insufficient evidence regarding the cytotoxicity of restorative 3D-printing resins, used as part of the digital workflow in dentistry. This study presents a novel comparative evaluation of cell viability and adhesion using human Wharton’s jelly-derived mesenchymal stem cells (WJ-MSCs), a less commonly used but clinically relevant cell line in dental biomaterials research. The aim of this study was to evaluate the cell viability of WJ-MSCs seeded on 3D-printed resins intended for temporary restorations. Resin discs of three commercial 3D-printing resins (NextDent C&B, Leaf Dental C&B, and UNIZ Temp) and a conventional self-curing acrylic resin (NicTone) were used. WJ-MSCs were cultured on the specimens for 1, 4, and 10 days. Cell viability was assessed using the PrestoBlue assay, Live/Dead immunofluorescence staining, and 7AAD/Annexin V staining. Cell adhesion was evaluated using scanning electron microscopy. Direct exposure to the 3D-printed resins and the self-curing acrylic caused slight reductions in cell viability compared to the control group in both microscopic analyses. 7AAD/Annexin V showed the highest percentage of viable WBCs for the conventional acrylic (34%), followed by UNIZ (35%), NextDent (42%), and Leaf Dental (36%) (ANOVA p < 0.05 Tukey’s post-hoc test p < 0.05). These findings suggest that 3D-printed resins could be considered safe for use in temporary restorations. Full article

The Standard Model (SM) fails to explain many problems (neutrino masses, dark matter, and matter–antimatter asymmetry, among others) that may be resolved with new particles beyond the SM. No observation of such new particles may be explained either by their exceptionally high mass or by considerably small coupling to SM particles. The latter case implies relatively long lifetimes. Such long-lived particles (LLPs) then to have signatures different from those of SM particles. Searches in the “central region” are covered by the LHC general purpose experiments. The forward small angle region far from the interaction point (IP) is unexplored. Such particles are expected to have the energy as large as E = $\mathcal{O}$(1 TeV) and Lorentz time dilation factor $\gamma =E/m\approx {10}^2$–${10}^3$ (with m the particle mass) hence long enough decay distances. A new class of specialized LHC detectors dedicated to LLP searches has been proposed for the forward regions. Among these experiments, FASER is already operational, and FACET is under consideration at a location 100 m from the LHC IP5 (the CMS detector intersection). However, some features of FACET require a specially enlarged beam pipe, which cannot be implemented for LHC Run 4. In this study, we explore a simplified version of the proposed detector PREFACE compatible with the standard LHC beam pipe in the HL-LHC Run 4. Realistic Geant4 simulations are performed and the background is evaluated. An initial analysis of the physics potential with the PREFACE geometry indicates that several significant channels could be accessible with sensitivities comparable to FACET and other LLP searches. Full article

Recent outbreaks of highly pathogenic human RNA viruses from probable zoonotic origin have highlighted the relevance of epidemic preparedness as a society. However, research in vaccinology and virology, as well as epidemiologic surveillance, is often constrained by the biological risk that live virus experimentation entails. These also involve expensive costs, time-consuming procedures, and advanced personnel expertise, hampering market access for many drugs. Most of these drawbacks can be circumvented with the use of pseudotyped viruses, which are surrogate, non-pathogenic recombinant viral particles bearing the surface envelope protein of a virus of interest. Pseudotyped viruses significantly expand the research potential in virology, enabling the study of non-culturable or highly infectious pathogens in a safer environment. Most are derived from lentiviral vectors, which confer a series of advantages due to their superior efficiency. During the past decade, many studies employing pseudotyped viruses have evaluated the efficacy of vaccines or monoclonal antibodies for relevant pathogens such as HIV-1, Ebolavirus, Influenza virus, or SARS-CoV-2. In this review, we aim to provide an overview of the applications of pseudotyped viruses when evaluating the neutralization capacity of exposed individuals, or candidate vaccines and antivirals in both preclinical models and clinical trials, to further help develop effective countermeasures against emerging neutralization-escape phenotypes. Full article

Hyaluronic acid (HA) is a ubiquitous glycosaminoglycan with distinct biological functions, dependent on its molecular weight. High-molecular-weight HA (HMWHA) primarily exhibits structural and anti-inflammatory roles, whereas low-(LMWHA) and very low-molecular-weight HAs (vLMWHA) actively participate in tissue regeneration and angiogenesis. This review highlights the pivotal roles of HA across the female reproductive lifespan, emphasizing how molecular weight dictates its therapeutic potential. In gynecology, LMWHA effectively alleviates symptoms of genitourinary syndrome of menopause, restores vaginal architecture, and mitigates complications following pelvic radiotherapy, improving both tissue integrity and patient quality of life. vLMWHA shows promise in enhancing viral clearance and lesion regression in human papillomavirus (HPV) infections. In obstetrics, HMWHA plays crucial roles in implantation, immunotolerance, and embryogenesis and maintains cervical barrier integrity to prevent ascending infections and preterm birth. Moreover, emerging clinical evidence supports oral HMWHA supplementation for reducing pregnancy complications, such as threatened miscarriage, subchorionic hematomas, and preterm delivery. This review underscores the necessity of considering HA’s molecular weight to optimize interventions in gynecological and obstetric care, offering tailored strategies to support women’s health throughout their lives. Full article

Recombinant vesicular stomatitis virus (rVSV) is a promising viral vaccine vector for addressing the COVID-19 pandemic. Inducing mucosal immunity via the intranasal route is an ideal strategy for rVSV-based vaccines, but it requires extremely stringent safety standards. In this study, we constructed two rVSV variants with amino acid mutations in their M protein: rVSV-M2 with M33A/M51R mutations and rVSV-M4 with M33A/M51R/V221F/S226R mutations, and developed COVID-19 vaccines based on these attenuated vectors. By comparing viral replication capacity, intranasal immunization, intracranial injection, and blood cell counts, we demonstrated that the M protein mutation variants exhibit significant attenuation effects both in vitro and in vivo. Moreover, preliminary investigations into the mechanisms of virus attenuation revealed that these attenuated viruses can induce a stronger type I interferon response while reducing inflammation compared to the wild-type rVSV. We developed three candidate vaccines against SARS-CoV-2 using the wildtype VSV backbone with either wild-type M (rVSV-JN.1) and two M mutant variants (rVSV-M2-JN.1 and rVSV-M4-JN.1). Our results confirmed that rVSV-M2-JN.1 and rVSV-M4-JN.1 retain strong immunogenicity while enhancing safety in hamsters. In summary, the rVSV variants with M protein mutations represent promising candidate vectors for mucosal vaccines and warrant further investigation. Full article

Introduction: Despite the key role of healthcare workers (HCWs) in tuberculosis (TB) prevention and control, there is a lack of regional data on their knowledge, attitudes, and practices (KAPs) regarding the disease in Atlantic Canada. Objectives: To assess the KAPs of HCWs and identify targets for educational interventions to enhance TB care and control. Methods: A cross-sectional study was conducted among HCWs in Atlantic Canada aged $\ge$19 years from October 2023 to February 2024. Participants were recruited via multiple channels such as social media, collegiate email lists, and snowball sampling. Survey data were collected using an online platform and analyzed using IBM SPSS Statistics v29. KAPs were assessed using Likert-type scales and internal consistency was evaluated using Cronbach’s alpha. Results: A total of 157 HCWs participated in this study (age range: 19 to 69 years); most were women (n = 145, 92%), born in Canada (n = 134, 85.4%), with nearly three-quarters (n = 115, 73.2%) who had never lived outside of Canada. Study participants demonstrated moderately high knowledge (M = 29.32, SD = 3.25) and positive attitudes (M = 3.87, SD = 0.37) towards TB and strong practices (M = 4.24, SD = 0.69) in TB care; however, gaps were identified in HCW abilities to recognize less common TB symptoms (e.g., rash and nausea), as well as inconsistent practices in ventilation and pre-treatment initiation. Internal consistency analysis indicated suboptimal reliability across all three KAP domains, with Cronbach’s alpha values falling below 0.7, thwarting further planned analyses. Conclusions: This study found overall moderate-to-strong TB-related KAPs among HCWs in Atlantic Canada; however, critical gaps in knowledge and practice were noted. This new information can now guide future educational initiatives and targeted training to enhance TB preparedness and ensure equitable care for patients in the region. Full article

Selective laser melting (SLM) offers a novel approach for manufacturing intricate structures, broadening the application of titanium alloy parts in the aerospace industry. After the build period, heat treatments of annealing (AT) and hot isostatic pressing (HIP) are often implemented, but a comparison of their mechanical performances based on the specimen orientation is still lacking. In this study, horizontally and vertically built Ti6Al4V SLM specimens that underwent the aforementioned treatments, together with their microstructural and defect characteristics, were, respectively, investigated using metallography and X-ray imaging. The mechanical properties and failure mechanism, via fracture analysis, were obtained. The critical factors influencing the mechanical properties and the correlation of the fatigue lives and failure origins were also estimated. The results demonstrate that the mechanical performances were determined by the α-phase morphology and defects, which included micropores and fewer large lack-of-fusion defects. Following the coarsening of the α phase, the strength decreased while the plasticity remained stable. With the discrepancy in the defect occurrence, anisotropy and scatter of the mechanical performances were introduced, which was significantly alleviated with HIP treatment. The fatigue failure origins were governed by defects and the α colony, which was composed of parallel α phases. Approximately linear relationships correlating fatigue lives with the X-parameter and maximum stress amplitude were, respectively, established in the AT and HIP states. The results provide an understanding of the technological significance of the evaluation of mechanical properties. Full article

To improve implant osseointegration while preventing infection, we developed a strontium (Sr)-doped Ti₃C₂T_x MXene coating on titanium, aiming to synergistically enhance bone integration and antibacterial performance. MXene is a family of two-dimensional transition-metal carbides/nitrides whose abundant surface terminations endow high hydrophilicity and bioactivity. The coating was fabricated via anodic electrophoretic deposition (40 V, 2 min) of Ti₃C₂T_x nanosheets, followed by SrCl₂ immersion to incorporate Sr²⁺. The coating morphology, phase composition, chemistry, hydrophilicity, mechanical stability, and Sr²⁺ release were characterized. In vitro bioactivity was assessed with rat bone marrow mesenchymal stem cells (BMSCs)—with respect to viability, proliferation, migration, alkaline phosphatase (ALP) staining, and Alizarin Red S mineralization—while the antibacterial efficacy was evaluated against Staphylococcus aureus (S. aureus) via live/dead staining, colony-forming-unit enumeration, and AlamarBlue assays. The Sr-doped MXene coating formed a uniform lamellar structure, lowered the water-contact angle to ~69°, and sustained Sr²⁺ release (0.36–1.37 ppm). Compared to undoped MXene, MXene/Sr enhanced BMSC proliferation on day 5, migration by 51%, ALP activity and mineralization by 47%, and reduced S. aureus viability by 49% within 24 h. Greater BMSCs activity accelerates early bone integration, whereas rapid bacterial suppression mitigates peri-implant infection—two critical requirements for implant success. Sr-doped Ti₃C₂T_x MXene thus offers a simple, dual-function surface-engineering strategy for dental and orthopedic implants. Full article

Objectives: The durability and breadth of neutralizing antibodies following SARS-CoV-2 mRNA vaccination remain incompletely understood. This study aimed to investigate how longitudinal changes in antibody isotype composition impact neutralization against structurally diverse SARS-CoV-2 variants. Methods: After screening a broader cohort of mRNA-vaccinated sera, time-matched samples collected one month (1 mpv) and three months post-vaccination (3 mpv) were selected for detailed analysis. Neutralization assays against live virus variants, enzyme-linked immunosorbent assays (ELISA), and immunogold electron microscopy were performed to assess antibody titers, isotype levels, and virion morphology. Results: Neutralization titers declined markedly at 3 mpv, particularly against immune-evasive variants. Notably, the Lambda variant showed disproportionately high sensitivity to early-phase sera despite its divergence from the vaccine strain. Antibody isotyping showed that IgA and IgM decreased over time, while IgG levels were relatively more sustained. Electron microscopy revealed broader virion size heterogeneity in Lambda (50–200 nm) compared to Wuhan (80–120 nm), potentially enhancing multivalent antibody engagement. Consistently, ELISA under reduced spike density conditions showed that IgA and IgM retained stronger binding than IgG. Conclusions: These findings indicate that the decline of IgA and IgM compromises neutralization breadth, especially against structurally divergent variants such as Lambda. Sustaining dynamic multivalent isotype responses that adapt to diverse spike morphologies may be critical for broad cross-variant immunity. Full article

The Bacillus Calmette-Guérin (BCG) vaccine confers broad, non-specific immunity that may bolster defenses against respiratory viruses. While NOD2 (nucleotide-binding oligomerization domain-containing protein 2)-driven pathways are central to innate immune responses, the contribution of surface receptor modulation on monocytes to shaping these responses remains underexplored. We analyzed whole-blood cultures from BCG-vaccinated Polish children, stratified by serostatus to SARS-CoV-2 and RSV, and stimulated for 48 h with live BCG, purified viral antigens, or both. RT-qPCR quantified mRNA levels of NOD2 and key cytokines (IL-1β, IL-2, IL-4, IL-6, IL-8, IL-10, TNF), while flow cytometry assessed CD14, HLA-DR, CD11b, and CD206 expression. Co-stimulation with BCG + RSV elicited the strongest transcriptional response, notably a 2–4-fold upregulation of NOD2, IL-1β, and IL-6 versus RSV alone. In SARS-CoV-2(+) donors, RSV alone induced higher NOD2 expression than BCG or BCG + RSV, while IL-2 peaked following BCG + SARS-CoV-2. Across conditions, NOD2 positively correlated with IL-4 and IL-6 but negatively correlated with IL-1β in SARS-CoV-2 cultures. Viral antigens increased CD14 and HLA-DR on monocytes, suggesting activation; CD206 rose only in dual-seropositive children. Our findings indicate that BCG stimulation affects pediatric antiviral immunity through NOD2-related cytokine production and induction of a CD14⁺HLA-DR⁺ phenotype, supporting its potential role in boosting innate defenses against respiratory pathogens. Full article

In this study, we describe the preparation of carbon dots (CDs) from natural charcoal by laser ablation in a liquid. A continuum wave (CW) laser diode operating at a wavelength of 450 nm, hitting a solid carbon target placed into a biocompatible liquid, constituted of a phosphate-buffered saline (PBS) solution and distilled water, was used for the generation of the CDs suspension. Exploring the practical applications of carbon dots, it was observed that the luminescence of the produced CDs can be used as bioimaging in living organisms, environmental monitoring, chemical analysis, targeted drug delivery, disease diagnosis, therapy, and others. The CDs’ luminescence can be induced by UV irradiation and, as demonstrated in this study, by energetic MeV proton beams. The fluorescence was revealed mainly at 480 nm when UV illuminated the CDs, and also in the region at 514–642 nm when the CDs were irradiated by energetic proton ions. Atomic force microscopy (AFM) of the CD films revealed their spherical shape with a size of about 10 nm. The significance of the manuscript lies in the use of CDs produced by laser ablation exhibiting luminescence under irradiation of an energetic proton beam. Full article

Background/Objectives: In the aftermath of the COVID-19 pandemic, individuals infected with SARS-CoV-2 have progressively displayed a range of symptoms linked to protracted COVID during the post-acute phase of illness. Concurrently, in several nations globally, the phenomenon of population aging has been intensifying. In this scenario, the aged population has become both vulnerable and high-risk during the acute phase of COVID-19, and faces significant dangers associated with long-COVID. This study seeks to analyze the incidence and spatial distribution of health complications in older people affected by COVID-19, in the first year of the pandemic (2020), in the State of Paraná, as well as to identify the factors associated with the development of cardiovascular, neurological, respiratory, and metabolic diseases. Method: An observational and retrospective study was carried out in the Brazilian state of Paraná. Participants were randomly selected from two databases. A total of 893 older people (≥60 years) participated in the study 12 months after acute COVID-19 infection. Telephone questionnaires were applied between March and December 2021. The Moran index test, logistic regression, and Poisson models were used to analyze the data. Results: In terms of age, most participants (66%) were between 60 and 69 years old, 25.8% were between 70 and 79 years old, and 8.2% were 80 years old or older. Most participants were female (51.2%), white (98.1%), had a partner (69.8%), and had been hospitalized due to COVID-19 (59.3%). Cardiovascular diseases were the most frequent in the population (39.5%), followed by metabolic diseases (27.3%). The long-term use of medication was associated with the development of metabolic diseases (aOR = 9.8), cardiovascular diseases (aOR = 6.6), and diseases in multiple organic systems (aOR = 3.2); living alone was associated with neurological diseases (aOR = 2.5), and the age group of 80 years or older (aOR = 2.4) was associated with cardiovascular events. The spatial distribution showed that complications in body groups are distributed randomly among the health regions of the state, with no influence from neighboring locations. Conclusions: Post-COVID-19 health complications are more frequent in older adults who have comorbidities and long-term medication use. Therefore, long-term monitoring of these individuals and investment in public policies for rehabilitation and prevention of complications are necessary. Full article

Italy supplies about one-seventh of the European Union’s total glass production, and the sector’s sizeable resource demands make it a linchpin of national industrial strategy. With growing environmental regulations and the push for resource efficiency, Material Flow Accounting has become essential for companies to stay compliant and advance sustainability. The investigation concentrates on Italy’s glass industry to clarify its material requirements, ecological footprint, and overall sustainability performance. STAN software v2, combined with an Economy-Wide Material Flow Accounting (EW-MFA) framework, models the national economy as a single integrated input–output system. By tracking each material stream from initial extraction to end-of-life, the analysis delivers a cradle-to-grave picture of the sector’s environmental impacts. During the 2021 production year, Italy’s glass makers drew on a total of 10.5 million tonnes (Mt) of material inputs, supplied 76% (7.9 Mt) from domestic quarries, and 24% (2.6 Mt) via imports. Outbound trade in finished glass removed 1.0 Mt, leaving 9.5 Mt recorded as Domestic Material Consumption (DMC). Within that balance, 6.6 Mt (63%) was locked into long-lived stock, whereas 2.9 Mt (28%) left the system as waste streams and airborne releases, including roughly 2.1 Mt of CO₂. At present, the post-consumer cult substitutes only one-third of the furnace batch, signalling considerable scope for improved circularity. When benchmarked against EU-27 aggregates for 2021, Italy registers a NAS/DMI ratio of 0.63 (EU median 0.55) and a DPO/DMI ratio of 0.28 (EU 0.31), indicating a higher share of material retained in stock and slightly lower waste generated per ton of input. A detailed analysis of glass production identifies critical stages, environmental challenges, and areas for improvement. Quantitative data on material use, waste generation, and recycling rates reveal the industry’s environmental footprint. The findings emphasise Economy-Wide Material Flow Accounting’s value in evaluating and improving sustainability efforts, offering insights for policymakers and industry leaders to drive resource efficiency and sustainable resource management. Results help scholars and policymakers in the analysis of the Italian glass industry context, supporting in the data gathering, while also in the use of this methodology for other sectors. Full article

Varicella-zoster virus (VZV) poses significant public health challenges as the etiological agent of varicella (chickenpox) and herpes zoster (HZ), given its high transmissibility and potential for severe complications. The introduction of VZV vaccines—particularly the vOka-based live attenuated and glycoprotein gE-based recombinant subunit vaccines—has substantially reduced the global incidence of these diseases. However, live attenuated vaccines raise concerns regarding safety and immunogenicity, especially in immunocompromised populations, while recombinant subunit vaccines, such as Shingrix, exhibit high efficacy but are associated with side effects and adjuvant limitations. Recent advancements in vaccine technology, including mRNA vaccines, viral vector vaccines, and virus-like particle (VLP) vaccines, offer promising alternatives with improved safety profiles and durable immunity. This review synthesizes current knowledge on VZV vaccine mechanisms, clinical applications, and immunization strategies, while also examining future directions in vaccine development. The findings underscore the pivotal role of VZV vaccines in disease prevention and highlight the need for continued research to enhance their public health impact. Full article

Adopting mobile robots for high voltage (HV) live-line operations can mitigate personnel casualties and enhance operational efficiency. However, conventional mechanical arms cannot inspect concealed spaces in the power cable tunnel because their joint integrates metallic motors or hydraulic serial-drive mechanisms, which limit the arm’s length and insulation performance. Therefore, this study proposes a 7-degree-of-freedom (7-DOF) bionic mechanical arm with rigid-flexible coupling, mimicking human arm joints (shoulder, elbow, and wrist) designed for HV live-line operations in concealed cable tunnels. The arm employs a tendon-driven mechanism to remotely actuate joints, analogous to human musculoskeletal dynamics, thereby physically isolating conductive components (e.g., motors) from the mechanical arm. The arm’s structure utilizes dielectric materials and insulation-optimized geometries to reduce peak electric field intensity and increase creepage distance, achieving intrinsic self-insulation. Furthermore, the mechanical design addresses challenges posed by concealed spaces (e.g., shield tunnels and multi-circuit cable layouts) through the analysis of joint kinematics, drive mechanisms, and dielectric performance. The workspace of the proposed arm is an oblate ellipsoid with minor and major axes measuring 1.25 m and 1.65 m, respectively, covering the concealed space in the cable tunnel, while the arm’s quality is 4.7 kg. The maximum electric field intensity is 74.3 kV/m under 220 kV operating voltage. The field value is less than the air breakdown threshold. The proposed mechanical arm design significantly improves spatial adaptability, operational efficiency, and reliability in HV live-line inspection, offering theoretical and practical advancements for intelligent maintenance in cable tunnel environments. Full article