Search Results (563)

Hyperspectral unmixing aims to estimate endmember spectra and their corresponding abundance fractions at the subpixel scale, which is a critical preprocessing step for quantitative analysis of hyperspectral remote sensing imagery. While deep learning-based methods have achieved remarkable progress, three fundamental challenges remain: (i) reliance on a single shared spatial prior that cannot decouple the heterogeneous spatial patterns of different land covers; (ii) the lack of synergy in jointly optimizing endmember extraction and abundance estimation; (iii) the poor robustness of unsupervised training to complex mixtures, noise, and class imbalance. To address these issues, we propose a novel unsupervised unmixing framework that integrates adaptive orthogonal multi-faceted graph representation with curriculum learning. Specifically, we design an Adaptive Orthogonal Multi-Faceted Graph Generator (AOMFG) to learn a set of independent orthogonal graph structures, achieving spatially informed decoupling of land cover patterns. Then, a dual-branch collaborative optimization network is constructed: a Graph Convolutional Network (GCN) branch that incorporates the learned spatial topological priors for abundance estimation, and a 1D Convolutional Neural Network (1DCNN) branch that employs a query-attention mechanism to adaptively aggregate pure spectral features for endmember extraction. Finally, we introduce a three-stage curriculum learning strategy that progressively fine-tunes the model, which significantly enhances its performance. Extensive experiments on three widely used real-world benchmark datasets demonstrate that our proposed framework consistently outperforms state-of-the-art methods in both endmember extraction and abundance estimation accuracy. Comprehensive ablation studies, parameter sensitivity analysis, and noise robustness tests further validate the effectiveness of each core component. Full article

The performance of remote sensing-based mineral alteration extraction is significantly restricted in the vegetation area. Spectral unmixing is one of the effective methods to address the vegetation problem during mineral alteration extraction. However, the spectral curves of different tree species vary a lot; if multiple tree species are regarded as a whole during the spectral unmixing stage, the proportions of vegetation would be estimated with more errors. The purpose of this study was to verify the effects of dominant tree species classification on spectral unmixing and reconstruction, and to apply the proposed method to the mineral alteration extraction practice. To accomplish this, the Shabaosi gold deposit region in Mohe City, China, with an area of 650 km², was selected as the study area. Firstly, reference spectral curves, GaoFen-1/6 (GF-1/6) satellite imageries, ZiYuan-1F (ZY-1F) satellite imageries, Sentinel-1B satellite synthetic aperture radar (SAR) data, the ALOS digital elevation model (DEM), and sub-compartment dominant tree species data were collected; subsequently, simulated mixed-pixel reflectance images of ZY-1F, reflectance images of GF-1/6, ZY-1F, backscattering data of Sentinel-1B, slope, aspect, and 5484 tree species samples were derived from the collected data. Secondly, to verify the effect of dominant tree species classification on mineral alteration extraction, the reference spectra of pine, oak, goethite, and kaolinite were used to construct a simulated ZY-1F mixed-pixel image, and spectral unmixing and reconstruction experiments were conducted. Thirdly, fourteen independent variables were selected from the derived data, five dominant tree species classification models were trained and tested using tree species samples via the ResNet50 algorithm, and the pine- and birch-dominated parts were segmented from the ZY-1F images. Fourthly, minimum noise fraction (MNF), pixel purity index (PPI), n-dimensional visualizer auto-clustering, and spectral angle mapper (SAM) methods were separately applied to the pine- and birch-dominated parts of ZY-1F images to extract and identify endmembers; subsequently, the fully constrained least squares (FCLS) and linear spectral unmixing (LSU) methods were separately applied to the pine- and birch-dominated parts to estimate endmember proportions and generate spectrally reconstructed ZY-1F images. Fifthly, the pine- and birch-dominated parts of spectrally reconstructed ZY-1F images were mosaiced, and the SAM was utilized to extract mineral alteration in the study area. The result showed that in the spectral unmixing and reconstruction experiment, the spectral reconstruction error declined from 0.0594 (simulated ZY-1F image without segmentation) to 0.0292 and 0.0388 (simulated ZY-1F image that was segmented by pine- and oak-dominated parts), suggesting that dominant tree species classification could improve the accuracy of spectral unmixing and reconstruction and help obtain a more reliable mineral alteration extraction result. In the study area, the tested overall accuracies (OA) and Kappa coefficients of the five dominant tree species classification models were 0.75 ± 0.03 and 0.50 ± 0.05, respectively, suggesting that conducting dominant tree species classification was feasible in dense vegetation areas and could facilitate mineral alteration extraction. After segmenting the ZY-1F image by pine- and birch-dominated parts and spectral reconstruction, eight main types of alteration, including kaolinite, vesuvianite, montmorillonite, rutile, limonite, mica, sphalerite, and quartz, were identified, and nine mineral alteration areas (MA) were delineated accordingly. Full article

Optical density (OD)-based cell growth measurement is commonly used in high-throughput screening (HTS) during drug discovery or when deciphering the pharmaceutical mechanism of action. While resuspending the cells via a mixing step is often assumed to be necessary prior to OD measurement, its essentiality in HTS workflows has not been systematically verified. Here, through the measurement of the growth of several strains of the microbial yeast Schizosaccharomyces pombe cells, we compared the overall growth dynamics between samples that have been mixed and not mixed. Using statistical quantification by a two-tailed paired t-test followed by multiple comparison corrections, we concluded from the comparison of the doubling time of cells growing in the exponential phase that mixing did not significantly affect the biological interpretation compared to unmixed samples. Doubling time quantification between mixed and unmixed samples showed a difference of approximately 10% on average based on the assessment of the growth of eight strains. As such, if the experimental outcome can accommodate this level of variability, incorporating a mixing step before OD determination would not be necessary. These observations support the simplification of HTS processes, improving the cost efficacy and process efficiency of readouts, yet maintaining the accuracy of data acquisition. Full article

Accurate mapping of lunar mineral distributions is essential for understanding the Moon’s origin and evolution and for enabling future in situ resource utilization (ISRU). Yet mineralogical inversion from orbital hyperspectral observations remains challenging due to limited spatial resolution, complex photometric conditions, and sparse returned samples. We present PGU-Net, a Hapke physics-guided deep autoencoder for nonlinear blind unmixing of lunar hyperspectral data. The encoder adopts a dual-attention design to enhance discriminative spectral features. The decoder performs linear mixing in the SSA domain and then reconstructs reflectance through a lightweight nonlinear module, while physics-consistent losses encourage radiative-transfer plausibility. Experiments on a synthetic lunar regolith dataset demonstrate that PGU-Net achieves consistently lower endmember SAD and abundance aRMSE than representative baselines across multiple noise levels. Additional validations on the terrestrial AVIRIS Cuprite benchmark and on Moon Mineralogy Mapper (${\mathrm{M}}^3$) observations near the Chang’e-5 (CE-5) and Chang’e-6 (CE-6) landing regions yield physically plausible mineral distributions. The ${\mathrm{M}}^3$ maps are broadly consistent with Kaguya MI mineral products and returned-sample constraints, supporting the practicality of PGU-Net for lunar mineralogical mapping. Full article

The forest understory litter fraction $\left({\mathrm{F}\mathrm{V}\mathrm{C}}_{\mathrm{y}}\right)$ is a critical indicator for evaluating the effectiveness of “understory erosion” control in red soil regions; however, its high-precision, large-scale monitoring remains challenging due to canopy occlusion. This study proposes an ${\mathrm{F}\mathrm{V}\mathrm{C}}_{\mathrm{y}}$ inversion framework that integrates high-spatial-resolution Sentinel-2 imagery with multi-angular prior knowledge from MODIS BRDF products. First, a linear mapping model between multi-band reflectances at 0° and 45° view angles was constructed using 500 m MODIS MCD43A1 products $(R^2>0.8)$. This model was subsequently employed as a physical prior for anisotropic characterization and transferred to 10 m Sentinel-2 imagery to generate a long-term, dual-angle reflectance dataset. Subsequently, the four-scale geometric-optical model was utilized to decouple canopy and understory background signals, followed by quantitative ${\mathrm{F}\mathrm{V}\mathrm{C}}_{\mathrm{y}}$ inversion using a pixel-based dimidiate model. Validation results confirmed the reliability of the framework $(R^2=0.74, RMSE=0.1073)$. Spatiotemporal evolution analysis indicated a significant upward trend in ${\mathrm{F}\mathrm{V}\mathrm{C}}_{\mathrm{y}}$ across Changting County from 2016 to 2025, with over 90% of the area showing improvement. The proportion of high-coverage areas $({\mathrm{F}\mathrm{V}\mathrm{C}}_{\mathrm{y}}>0.75)$ increased from 10% to 38%, exhibiting a “high in the center, low in the periphery” spatial pattern that aligns closely with core ecological restoration zones. Stability and persistence analyses further revealed that 61.18% of the study area reached moderate-to-high stability, and 70% of pixels exhibited a “positive persistence-improvement” trend, highlighting a pronounced inertia-driven enhancement in ecological recovery. This study provides a refined technical pathway for assessing soil and water conservation benefits in red soil regions. Full article

Accurate source apportionment of soil heavy metals (HMs) is critical for targeted pollution mitigation and ecological remediation. This review systematically synthesizes and compares five mainstream source apportionment approaches—receptor models (positive matrix factorization, PMF; absolute principal component score-multiple linear regression, APCS-MLR; UNMIX model), stable isotope tracing, and random forest (RF)-based machine learning—to provide researchers with a comprehensive methodological framework. The methodology includes a systematic literature review, comparative analysis of methodological principles, and synthesis of representative case studies from diverse geographical contexts. The core principles, evolutionary paths, typical use cases (e.g., industrial zones, agricultural fields, regional surveys), and inherent limitations are synthesized for each method. A practical decision framework linking research contexts (study objectives, spatial scales, data availability) to optimal method selection, along with guidelines for multi-method integration, is proposed. This review provides actionable guidance for researchers and practitioners in selecting appropriate methods for specific pollution scenarios, ultimately supporting more effective environmental management and policy development. Full article

This work presents a portable polarimetric multispectral imaging (PMSI) system operating in the visible to shortwave infrared range (VNIR–SWIR: 400–1700 nm) and its application to target detection, discrimination from aquatic backgrounds, and polymer identification. The instrument integrates two synchronized cameras with motorized bandpass filters and piezoelectric polarization control, enabling the acquisition of 48 wavelength–polarization measurements per capture. This configuration allows the extraction of both intensity-based and polarimetric features, including the degree of linear polarization (DoLP). A complete radiometric and polarimetric calibration framework is implemented, encompassing system response characterization, polarization-dependent gain correction, and reflectance normalization under variable illumination. Experiments conducted on a representative set of 16 polymer materials show that polarimetric information consistently improves class separability compared to intensity-only features, with a mean gain of 6.9 (95% CI: 6.35–8.47). Although the correlation between intensity- and DoLP-based separability is moderate (r = 0.44), the results indicate complementary identification capability. Material recoverability was further evaluated using spectral unmixing techniques (VCA, N-FINDR, and PPI), with VCA offering the best accuracy–complexity trade-off on the calibrated Stokes reflectance dataset. Despite these gains, identification among chemically similar polyethylene variants remains challenging due to limited spectral and polarimetric contrast. An underwater detectability study under natural illumination reveals strong wavelength-dependent constraints: SWIR penetration is limited to 4 cm, whereas VNIR bands (430–550 nm) preserve detectability up to 20 cm, with DoLP enhancing edge visibility. These results motivate future validation in more complex aquatic conditions and with increased spectral dimensionality. Full article

Arid and semi-arid regions are critical to terrestrial ecosystems and regional carbon cycle regulation, directly contributing to peak carbon and carbon neutrality goals. However, the fragmented landscapes in these regions pose significant challenges to conventional pixel-based classification, which often struggles with mixed pixel issues and lacks biophysical interpretability. To address these limitations, this study develops an Ecologically Constrained Deep Learning Autoencoder (ECO-DEAU) framework for sub-pixel land cover mapping by integrating biophysical constraints. Specifically, ECO-DEAU employs spectral indices to extract standard spectral signatures for five primary land cover types, which serve as initial weights to guide the autoencoder in estimating fractional abundances. The model was trained across ten representative landscape zones in the Inner Mongolia section of the Yellow River Basin and validated against high-resolution Gaofen-2 data. Results demonstrated that ECO-DEAU yielded an average $R^2$ of 0.687, reaching a maximum $R^2$ of 0.749 in spatially heterogeneous transition zones, representing a substantial improvement over the baseline unconstrained Deep Autoencoder (DEAU). By effectively resolving the blind source separation problem and improving decomposition accuracy, ECO-DEAU serves as a robust tool for addressing mixed pixel challenges in heterogeneous environments, thereby facilitating large-scale, high-resolution carbon sink monitoring. Full article

This study evaluates the effectiveness of laser cleaning techniques for the non-contact removal of unwanted deposits from the surface of contemporary urban mural paintings. Two sets of mock-up samples, painted with popular graffiti spray paints on lime-based plaster, and artificially contaminated, were subjected to various cleaning procedures using Nd:YAG lasers operated in Q-switched (QS), long Q-switched (LQS) or short free-running mode (SFR). A multi-analytical approach—including X-ray fluorescence spectroscopy (XRF), Fourier-transform infrared spectroscopy (FTIR), colorimetry, and hyperspectral imaging (HSI)—was used to identify pigments and binders, and to evaluate cleaning efficiency and pigment preservation. XRF and FTIR were useful in understanding the composition of the sprays, while colorimetric ΔE values quantified cleaning efficiency and potential damage, and hyperspectral reflectance and LSU (linear spectral unmixing) abundance maps provided spatial distribution insights into contaminant removal and pigment preservation. The results demonstrate that laser cleaning effectiveness and selectivity are strongly dependent on the operational regime and fluence. In particular, long Q-switched laser irradiation at moderate fluence levels achieved effective contaminant removal with minimal chromatic and chemical alteration of the original paint layers. These findings support the development of tailored, sustainable, and non-contact laser cleaning protocols for the conservation of contemporary urban murals and contribute to the establishment of objective, multi-parameter criteria for evaluating cleaning outcomes in street art conservation. Full article

Vision Transformers (ViTs), owing to their strong capability in modeling global contextual dependencies, have been widely adopted in hyperspectral image unmixing (HU). However, standard ViTs process images by partitioning them into non-overlapping patches, which disrupts spatial continuity at the pixel level and neglects the fine-grained structural relationships among pixels within local regions. Consequently, effectively capturing the detailed spatial–spectral features required for accurate unmixing remains challenging. Furthermore, the high computational complexity of global self-attention and its sensitivity to noise limit the applicability of conventional Transformers to HU. To address these issues, we propose a spatial–spectral similarity guided Transformer-in-Transformer (SSTNT) framework. The proposed network adopts a modified TNT architecture, in which the inner Transformer employs a linear self-attention (LSA) mechanism to efficiently exploit pixel-level local features within sliding windows, while the outer Transformer preserves global attention to aggregate contextual information, thereby forming a cooperative local–global optimization scheme. Furthermore, a lightweight spatial–spectral similarity module is introduced to enhance the modeling of neighborhood structures. Finally, spectral reconstruction is achieved through a trainable endmember decoder and a normalized abundance estimation module. Extensive experiments conducted on both synthetic and real hyperspectral datasets demonstrate the effectiveness and robustness of the proposed method. Full article

Hyperspectral unmixing (HU) is fundamental for conducting quantitative analyses in remote sensing, yet existing methods face a persistent tradeoff between model performance and physical interpretability. Although deep learning models achieve superior performance, even “gray-box” models that incorporate physical constraints still suffer from an intrinsically opaque decision-making process, which hinders their trustworthiness in critical applications. To address this challenge, this paper introduces a theory-guided unmixing framework aimed at enhancing mechanistic interpretability called the sparse and subspace-attentive transformer unmixing network (SSTU-Net). Unlike heuristic architectures, SSTU-Net is rigorously derived from the first principles of sparse rate reduction (SRR) theory. Its core modules—the multi-head subspace self-attention (MSSA) and the iterative shrinkage-thresholding algorithm (ISTA)—directly implement the essential mathematical steps of information compression and sparsification within the SRR theory, respectively. Extensive experiments on both synthetic and real hyperspectral datasets demonstrate that SSTU-Net achieves competitive performance compared to representative state-of-the-art methods—including advanced autoencoder-based networks (e.g., CyCU-Net and DAAN) and recent transformer-based unmixing architectures (e.g., DeepTrans and MAT-Net)—while strictly adhering to theoretically predicted evolutionary trajectories. More importantly, a series of specifically designed structural interpretability validation experiments mechanistically confirm the theoretically predicted behaviors, such as layer-wise information compression, feature sparsification, and subspace orthogonalization. These results reveal the internal working mechanisms of SSTU-Net, validating the feasibility and significant potential of our principled theory-guided framework for developing high-performance and trustworthy intelligent models in remote sensing. Full article

Drought-induced tree mortality is a growing threat to Mediterranean ecosystems, which host high biodiversity but face increasing water stress under climate change. Detecting mortality over large areas with satellite data remains challenging due to open canopies and mixed pixels that obscure vegetation signals. This study evaluates the performance of two widely used vegetation indices—the Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI)—alongside a novel application of Spectral Unmixing derived vegetation cover Spectral Unmixing (SU) within the LandTrendr algorithm to track tree mortality in southwest Crete, Greece. High-resolution Unmanned Aerial System (UAS) imagery was used to validate satellite observations, demonstrating strong agreement with field data ($R^2$ = 0.95) and confirming its suitability as reference data. LandTrendr applied to NDVI, NDWI, and SU detected major mortality events between 1995 and 2008, with SU identifying the largest affected area. While NDVI and NDWI achieved higher accuracy in distinguishing unaffected plots, SU performed best at detecting mortality. Regression analysis revealed a limited ability of all approaches to quantify mortality magnitude, though SU improved when high-mortality plots were excluded. Overall, NDVI effectively tracked canopy changes, NDWI provided early warnings of drought stress, and SU reduced soil interference to better capture mortality patterns. By integrating satellite time series with UAS validation, this study demonstrates a scalable approach for detecting forest decline and offers actionable insights to guide Mediterranean forest management under increasing drought pressure. Full article

Soil heavy metal contamination in mining areas poses a serious environmental challenge, requiring monitoring approaches with both wide coverage and high accuracy. Hyperspectral remote sensing provides an effective solution, yet its performance in complex mining environments is often limited by mixed-pixel effects and nonlinear spectral responses. To address these issues, this study proposes a Physically-Constrained Collaborative Endmember Extraction (PCCEE) framework that integrates spectral unmixing with machine learning for multi-element inversion. Using Gaofen-5 hyperspectral imagery, a collaborative workflow combining Pixel Purity Index (PPI), Vertex Component Analysis (VCA), and prior-spectral-constrained Spectral Angle Mapper (SAM) was developed to improve endmember purity and physical interpretability. Among three unmixing models (LMM, NMF, and SVR), the Linear Mixing Model achieved the best balance between accuracy and efficiency. Random Forest regression using retrieved abundances enabled high-accuracy inversion of eight heavy metals (mean R² = 0.85). Spatial analysis revealed significant co-enrichment of Pb, Cd, and Zn related to sulfide weathering, while PCA distinguished compound and independent pollution sources. The proposed PCCEE framework effectively mitigates mixed-pixel interference and provides a transferable approach for heavy metal monitoring and risk assessment in complex mining environments. Full article

The McMurdo Dry Valleys (DVs) of South Victoria Land, Antarctica, constitute the largest ice-free region on the continent and one of Earth’s most Mars-analog environments. Their hyper-arid polar desert conditions offer a unique setting for investigating surface weathering and mineralogical processes under extreme climates. This study presents the first regional-scale mapping of alteration and crystalline weathering minerals across the McMurdo DVs. It uses Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) multispectral data; visible and near-infrared (VNIR) and shortwave infrared (SWIR) bands were analyzed through a Spectral Hourglass Workflow, endmember extraction, and spectral unmixing with Matched Filtering (MF) and Constrained Energy Minimization (CEM). Inter-algorithm consistency analysis between MF and CEM yielded 78.83% overall agreement with a Kappa coefficient of 0.75, indicating strong methodological consistency in mineral discrimination using ASTER VNIR+SWIR data. It should be noted that this agreement reflects internal algorithmic robustness rather than independent geological validation. Geological reliability is instead supported by documented field observations, lithological map comparisons, and spectral correspondence with the USGS spectral library. Validation employed documented field observations, lithological maps, and the USGS spectral library. Results reveal distinct spatial distributions of hematite-limonite/goethite, jarosite, kaolinite/smectite-illite-pyrophyllite-alunite, muscovite, hydrous silica/sericite/jarosite/hematite, epidote/chlorite, and calcite, closely associated with lithological units and unconsolidated deposits in Taylor, Wright, Victoria, and McKelvey Valleys. An inter-algorithm consistency check achieved 78.83% overall accuracy with a Kappa coefficient of 0.75, underscoring the robustness of ASTER VNIR+SWIR data for Antarctic mineral discrimination despite localized spectral mixing. Beyond refining the geological understanding of the McMurdo DVs, these results establish ASTER as an effective tool for regional mineralogical mapping in inaccessible polar terrains. The findings further strengthen the role of the Dry Valleys as a terrestrial analog for Mars, where similar mineralogical assemblages and spectral ambiguities have been observed, thereby contributing to both Antarctic geoscience and planetary exploration frameworks. Full article

The aim of this research is to investigate potential uses of the CHIME and LSTM missions for urban climate research. Therefore, this paper initially introduces two methodologies to obtain synthetic images for these future ESA missions starting from existing airborne or spaceborne data sets. Subsequently, this work shows to what extent these synthetic CHIME and LSTM data sets can be used to characterize urban materials and their thermal properties, with the final aim of better management of the urban heat island effect. Spectral unmixing using database spectra of urban materials or image-driven endmembers is applied to synthetic data for Athens, Greece, obtained from ESA’s THERMOPOLIS-2009 airborne campaign or the PRISMA mission, together with ECOSTRESS data sets. Experimental results on two neighborhoods of the city of Athens show that these synthetic data have the potential to extract urban material maps, but the limitations suffered by these data suggest that using image-driven endmembers is the most effective choice towards more accurate results. Full article