Search Results (205)

Pharmaceuticals and personal care products (PPCPs) are emerging contaminants posing ecological risks in wastewater. Constructed wetlands (CWs) offer sustainable treatment through integrated biological processes. In this study, a biomimetic microbial CW reactor was developed using 30 L aquariums with porous media, aeration setups, and surface plants to simulate natural wetland conditions. This design combines enhanced microbial degradation strategies using fungal (Trametes versicolor), bacterial (Pseudomonas aeruginosa), and consortia degradation, integrating multiple biological pathways. Synthetic wastewater containing 100 mg/L of selected PPCPs, including caffeine, methylparaben, and trichlorocarbanilide (TCC), was used to evaluate the degradation potential of these microbial treatments. While caffeine and methylparaben were effectively targeted, TCC degradation was inconclusive due to solubility limitations in the selected solvent. Over three months, system stability, plant growth, and microbial biomass were monitored, and contaminant degradation was tracked using Nuclear Magnetic Resonance analysis. Results demonstrated that individual fungal and bacterial treatments achieved near-complete caffeine degradation (99–100%) within seven weeks, while the combined treatment accelerated this process to just four weeks. Methylparaben followed a similar trend, achieving complete degradation by the seventh week. This study highlights the potential of microbial CW systems fortified with targeted microbial consortia as a scalable solution for pollutant removal. Future work should refine microbial combinations and analytical methods to expand the range of treatable pollutants. Full article

Hericium erinaceus is a fungus that, in addition to its health-promoting properties (including regenerative properties for gastrointestinal membranes and support for neuronal regeneration in neurodegenerative diseases such as Parkinson’s disease), has the ability to synthesize valuable metabolites, such as flavonoids (polyphenols) and terpenoids. These compounds possess strong biocidal properties. These substances provide the growing H. erinaceus mycelium with protection against colonization by other species of rot fungi, such as Trametes versicolor. For these reasons, the biological compounds produced by H. erinaceus can be used to produce ecological fungicides, which will find innovative applications in protecting forest tree seedlings. It should also be emphasized that valuable fungal substances are synthesized primarily by the mycelium of H. erinaceus during the initial stages of its development. Therefore, we undertook to develop an updated and modernized methodology for cultivating H. erinaceus mycelium in the laboratory, with the goal of commercializing the production of this mycelium, which will be used to isolate fungicidal substances metabolized by the fungus cultures. The biocidal substances obtained will be used to produce innovative fungicides in order to protect forest tree seedlings. The studies were conducted using various types of nutrient media, including Potato Dextrose Agar (PDA), Malt Extract Agar (MEA), and wort medium, at various temperatures ranging from 15 °C to 25 °C. Simultaneously, experiments were conducted using solidified media with a pH ranging from 4.0 to 7.0. The research was also expanded to include the growth and execution of experiments using a processed wood substrate, namely, sawdust made from individual structural wood elements. The sawdust was prepared from the bark, sapwood, and heartwood of sessile oak. The PDA medium was more favourable to the mycelium growth of H. erinaceus at 25 °C. It was also found that an acidic pH in the range of 4.0–5.0 significantly influenced the changes in the growth rate of the mycelium species and their phenotype. It was observed that mycelial growth on a substrate of oak sawdust made from sapwood resulted in intensive mycelial growth and a significant reduction in the wood substrate compared to sawdust made from bark, heartwood, and a mixture of all types of sawdust. The reason for the low mycelial growth, low mass reduction and slight reduction in the mass of sawdust made from bark, heartwood, and a mixture of all types of sawdust was the presence of high levels of tannins, which inhibited the fungal growth. Full article

Invasive species are a recurring global problem, and the water hyacinth (Pontederia crassipes) is a well-known example. Various strategies have been explored to manage its spread, including its use as an agricultural amendment. However, when P. crassipes biomass is incorporated into soil and undergoes degradation, it may increase soil conductivity and promote metal leaching, potentially affecting soil biota, particularly microbiota. Saprophytic fungi play a key role in the decomposition and renewal of organic matter, and their resilience to stressors is crucial for maintaining soil function. Thus, the aim of this study was to evaluate the effects of P. crassipes biomass extracts on the saprophytic fungus Trametes versicolor by evaluating fungal growth and metabolic changes [including sugar content, phosphatase enzymatic activity, and reactive oxygen species (ROS) production]. The fungus was exposed for 8 days to a dilution series of extracts (100%—undiluted, to 3.13%) prepared from P. crassipes biomass collected at five locations in Portuguese wetlands. Two sites were in the south, within a Mediterranean climate (Sorraia and Estação Experimental António Teixeira), and three were in the north, within an Atlantic climate (São João de Loure, Pateira de Fermentelos, and Vila Valente), representing both agricultural-runoff–impacted areas and recreational zones. Extracts were used to simulate a worst-case scenario. All extracts have shown high conductivity (≥15.4 mS/cm), and several elements have shown a high soluble fraction (e.g., K, P, As, or Ba), indicating substantial leaching from the biomass to the extracts. Despite this, T. versicolor growth rates were generally not inhibited, except for exposure to the São João de Loure extract, where an EC₅₀ of 45.3% (extract dilution) was determined and a significant sugar content decrease was observed at extract concentrations ≥25%. Possibly due to the high phosphorous leachability, both acid and alkaline phosphatase activities increased significantly at the highest percentages tested (50% and 100%). Furthermore, ROS levels increased with increasing extract concentrations, yet marginal changes were observed in growth rates, suggesting that T. versicolor may efficiently regulate its intracellular redox balance under stress conditions. Overall, these findings indicate that the degradation of P. crassipes biomass in soils, while altering chemical properties and releasing soluble elements, may not impair and could even boost microbiota, namely saprophytic fungi. This resilience highlights the potential ecological benefit of saprophytic fungi in accelerating the decomposition of invasive plant residues and contribution to soil nutrient cycling and ecosystem recovery. Full article

Lignin-based polyurethanes represent a promising strategy for developing more sustainable wood coatings by partially replacing fossil-derived polyols with renewable aromatic biopolymers. In this study, a polyurethane formulated with organosolv lignin (LPU) was synthesized and applied on two non-durable European wood species, Fagus sylvatica L. and Picea abies L., and compared with a commercial fossil-based polyurethane (CPU). Coated samples were evaluated for color stability, gloss evolution, wettability, adhesion, impact and scratch resistance, and biological durability. Accelerated ageing was performed under xenon-light irradiation, while decay resistance was assessed against Gloeophyllum trabeum and Trametes versicolor. Additional tests examined susceptibility to blue-stain fungi and surface morphology via SEM. LPU produced a matte film with intrinsically darker coloration but excellent chromatic stability and minimal gloss variation during ageing. Its initial hydrophobicity was higher on beech and comparable to CPU on spruce. Although CPU exhibited superior adhesion and slightly better mechanical resistance, LPU provided enhanced protection against blue-stain fungi—particularly on spruce—and a more uniform response to decay fungi across wood species. Overall, despite its darker appearance, the lignin-based formulation offered functional protection comparable to the commercial coating, confirming its potential as a viable bio-based alternative for above-ground wood applications. Full article

Background: The accumulation of β-amyloid plaques, neurofibrillary tangles, and neuroinflammation are key hallmarks of Alzheimer’s disease (AD). Reactive oxygen species (ROS) act as major triggers and amplifiers of neuroinflammatory responses, contributing to immune dysregulation and neuronal damage. Despite extensive research, no effective therapy halts or reverses AD progression, emphasizing the need for alternative preventive strategies, including the use of natural compounds. Objectives: This study evaluated the neuroprotective effects of simulated digestive fractions (permeate fraction) of mushroom biomass (MB)—Trametes versicolor (TV), Hericium erinaceus (HE), and Pleurotus ostreatus (PO)—and key gut microbiota-derived metabolites, such as short-chain fatty acids (SCFAs) and γ-aminobutyric acid (GABA) on ROS production in human microglial cells (HMC3) and in transgenic Caenorhabditis elegans models exhibiting hyperphosphorylated Tau and β-amyloid-induced toxicity. Methods: Cell viability and ROS production were assessed in HMC3 cells treated with mushroom fractions and metabolites. Chemotaxis and paralysis assays were performed in transgenic C. elegans strains expressing hyperphosphorylated Tau or β-amyloid proteins. Results: Mushroom digestive fractions and SCFAs significantly decreased ROS levels in HMC3 cells. Moreover, mushroom digestive fractions, butyric acid, and GABA improved behavioral outcomes in C. elegans, enhancing chemotaxis and delaying paralysis. These effects were dose-dependent and varied among mushroom species and metabolites. Conclusions: Mushroom-derived digestive fractions and microbiota-related metabolites exhibit neuroprotective activity by modulating oxidative stress and mitigating neurodegeneration-associated behaviors. Diets enriched with such MBs may support preventive strategies for neurodegenerative diseases. Further research is required to elucidate the molecular mechanisms underlying these protective effects and their translational potential for human neurodegenerative diseases. Full article

Treatment of polymeric solid waste, such as used membranes, is vital for environmental sustainability. Cellulose-based membranes are widely utilized in the water industry due to their resistance to biodegradation. These non-biodegradable membranes can persist in landfills and aquatic environments for extended periods. Our study assessed the biodegradation potential of Trametes versicolor on a newly fabricated cellulose acetate (CA) membrane and a commercially produced membrane under various conditions, including oxidative stress. Additionally, we employed T. versicolor encapsulated in a small bioreactor platform (SBP) for media inoculation and biomass augmentation. Treatment of the commercially produced CA membrane within a timeframe of 30 days was unsuccessful. This was primarily attributed to the structural stability of the membrane over time and the limited ability of the culture to attach to the membrane surface. These results underscore the necessity of exploring alternative biopolymer cellulose-based materials for ultrafiltration (UF) and microfiltration (MF) membrane applications. The custom-made UF membrane, treated by ozonation as a pretreatment, emerged as an effective approach for enhancing biodegradation. Combining these factors, we expect to achieve over 27.75 ± 1.5% weight loss in membrane solids by 30 days of treatment. This study represents the first inquiry into the biodegradation capabilities of T. versicolor on CA-based membranes. Full article

Biopurification systems are designed for the treatment of pesticide-containing agricultural wastewater; their biologically active matrix, the biomixture, can be modified to enhance the pesticide removal capacity. Two approaches, fungal bioaugmentation with Trametes versicolor and amendment with biochar, were applied for the potential improvement of biomixtures’ capacity to remediate myclobutanil-contaminated wastewater. The conventional biomixture (B) and its modifications, either bioaugmented with Trametes versicolor (biomixture BT) or supplemented with pineapple biochar (5% v/v) (biomixture BB), were spiked with myclobutanil at a very high concentration (10,000 mg/kg) to simulate extreme on-farm events such as the disposal or leakage of commercial formulations. The dissipation followed a bi-phasic behavior in every case. Both modifications of the conventional biomixture increased the dissipation rates, resulting in estimated DT₅₀ values of 61.9 (BB) and >90 days (BT) compared to biomixture B (DT₅₀ = 474 days). The assessment of biomixtures’ detoxification was carried out with two different bioindicators: a seed germination test in Lactuca sativa and an algal growth inhibition test. Some degree of detoxification was achieved for all biomixtures in both indicators, with the exception of the biochar-containing biomixture, which, despite showing the fastest myclobutanil dissipation, was unable to maintain a steady detoxification trend towards the algae over the course of the treatment, probably due to biochar adverse effects. This approach seems promising for removing persistent myclobutanil from agricultural wastewater and demonstrates the dissipation capacity of biomixtures at extremely high pesticide concentrations likely to take place at an on-farm level. Full article

Mushroom diversity is essential for maintaining ecological balance and provides valuable bioactive compounds for human use. Beyond their nutritional value, mushrooms contribute to functional foods and have applications in nutraceuticals, pharmaceuticals, and biotechnology. For example, β-glucans from Lentinula edodes are commercialized as immune-enhancing nutraceuticals, polysaccharide Krestin (PSK) from Trametes versicolor is used as an adjuvant in cancer therapy, and enzymes such as laccases from Pleurotus species are widely applied in biotechnological processes. One of the abundant compounds found in mushrooms is ergosterol, which is a sterol present in the cell membrane of the fungal body. Ergosterol has significant health benefits due to its antioxidant, immunomodulatory, and anti-inflammatory properties. Furthermore, ergosterol is a precursor to vitamin D₂ (ergocalciferol), which can be synthesized through exposure to ultraviolet (UV) light and thermal radiation. This review highlights the importance of Himalayan mushroom biodiversity, particularly the wild edible mushrooms traditionally collected and used. This review thoroughly discusses the ergosterol and vitamin D₂ content, their biosynthesis in mushrooms, and the role of environmental factors used to enhance biosynthesis. We also discuss the sustainable cultivation of Himalayan mushrooms and their nutraceutical properties. Several Himalayan mushrooms have been reported to possess health-promoting properties, and their incorporation into functional foods may contribute to improved public health. Furthermore, the future research directions are highlighted. Full article

Fungal laccases are promising oxidative enzymes for bioremediation applications, particularly in the degradation of synthetic dyes present in industrial effluents. Here, we evaluated the inhibitory effects of sodium chloride (NaCl) and sodium sulfate (Na₂SO₄) on the activity of Trametes versicolor laccase and its ability to decolorize Congo Red (CR), Malachite Green (MG), and Remazol Brilliant Blue R (RBBR). Enzyme assays revealed concentration-dependent inhibition, with IC₅₀ values of 0.22 ± 0.04 M for NaCl and 1.00 ± 0.09 M for Na₂SO₄, indicating stronger inhibition by chloride. Kinetic modeling showed mixed-type inhibition for both salts. Despite this effect, the enzyme maintained significant activity: after 12 h, decolorization efficiencies reached 95 ± 4.0% for MG, 88 ± 3.0% for RBBR, and 75 ± 3.0% for CR, even in the presence of 0.5 M salts. When applied to a mixture of the three dyes, decolorization decreased only slightly in saline medium (94.04 ± 4.0% to 83.43 ± 5.1%). FTIR spectra revealed minor structural changes, but toxicity assays confirmed marked detoxification, with radicle length in lettuce seeds increasing from 20–38 mm (untreated dyes) to 41–48 mm after enzymatic treatment. Fungal growth assays corroborated reduced toxicity of treated dyes. These findings demonstrate that T. versicolor laccase retains functional robustness under ionic stress, supporting its potential application in saline textile wastewater remediation. Full article

A mycelium is a network of hyphae that possesses the ability to self-assemble and grow into various shapes, acting as a natural binder that minimises the need for intensive chemical and energy processes, making it an alternative capable of forming structures that may eventually outperform traditional fibres such as animal leather and polyester. In this work, two mycelium mats were created, and their thickness, water absorption, coverage, and tear strength for the sewing process were determined. Fibre mats were grown in vitro or on a jute substrate. The mats were treated with salt, tannin or citric acid solutions, then air- or oven-dried. In general, the treatment that least modified the colour and appearance of the mycelium mats was citric acid, and when dried by airflow, the thickness averaged 1.4 mm. The highest tear strengths were 10.55 N/mm and 12.7 N/mm for the mycelium mats treated with citric acid without and with jute, respectively. A high percentage of water absorption was observed, reaching 267% (mycelium mats treated with tannins and dried at 65 °C) and 28% (mycelium mats treated with citric acid and air-dried). In general, all mycelium mats can be sewn, except for those treated with citric acid, which have a viscous texture and require slow sewing to prevent the mycelium from breaking. The Trametes fungus can be utilised in the production of mycelial materials, allowing for the optimisation of growth conditions to obtain mycelial mats that meet the requirements for use as an environmentally friendly alternative in the textile and related industries. Full article

Evaluating wood’s natural durability is essential when establishing the level of protection that is required depending on the end use to extend its service life. Natural durability is defined as the intrinsic resistance of wood against the attack of destructive organisms. There are standardized methods for estimating a durability value. In Europe, the EN 350:2016 standard is responsible for establishing the basic guidelines, as well as the necessary tests to determine this value. This standard applies to commercial wood, both native and imported, and helps to improve and obtain better construction applications depending on the final use. This work aimed to study the natural durability of Quercus pyrenaica Wild. against Basidiomycetes (Coniophora puteana (Schumacher ex Fries) Karsten and Trametes versicolor (Linnaeus) Quélet) and termites (Reticulitermes grassei Clément). The standards applied were EN 113-2:2021 and EN 117:2023. The heartwood of the Quercus pyrenaica is highly durable against both xylophages basidiomycetes and subterranean termites. The sapwood is moderately durable against Coniophora puteana, slightly durable-not durable against Trametes versicolor, and moderately durable against termites. These results open the door for commercialization of this species, and it is expected to be included in EN 350:2016, where Q. pyrenaica is not included. Full article

Birch stands, dominated by Betula pendula Roth, are a common feature of boreal forests. Within the Krasnoyarsk (central) group of regions, they are concentrated in the taiga, subtaiga and forest steppe zones of actively managed forests, represented by stands of seed and shoot origin. The health and productivity of birch forests is often determined by the activity of wood-decay fungi, which leads to rot and decay in trees. The objective of the research is to evaluate the impact of stem rot on birch forests in the study area, with a focus on key ecological and silvicultural factors. The research methods employed included a reconnaissance survey of birch forests, a detailed forest pathology survey of forest stands on research plots (31 pcs.), comprehensive macroscopic diagnostics of stem rot, identification of xylotrophic fungi by basidiomes, integrated assessment of forest health, graph analytics and statistical data analysis. Stem rot has been identified in all birch forests in the study area. In shoot origin stands, the incidence rate has reached the stage of the disease center (i.e., more than 10% of trees are infected). The following wood-decay fungi have been detected on the trunks of living trees affected by rot: Fomes fomentarius, Fomitopsis pinicola, Inonotus obliquus, Phellinus igniarius, and Trametes versicolor. The infection typically infects trees via spores, finding entry through dying branches or mechanical and thermal wounds on trunks. In trees of shoot origin, stem rot is frequently transmitted via mycelium from stumps left after felling. This, in conjunction with diminished immunity, contributes to a substantially elevated incidence of stem rot in comparison to stands of seed origin. The research has not established a reliable correlation between the incidence of stem rot and forest stand characteristics due to the impact of human activity on birch forests (e.g., cutting, fires, tree injury). At the same time, no reliable connection has been established between the spread of stem rot and the stage of recreational disturbance. Trees of various sizes are affected by stem rot, usually proportional to their representation in the structure of the forest stand. The disease has a detrimental effect on the trees, which is clearly evident in the decline of forest health. Full article

Mycelium-based biocomposites (MBBs) represent a sustainable alternative to synthetic composites, as they are produced from lignocellulosic substrates bonded by fungal mycelium. Their mechanical performance depends on multiple interacting factors, including the substrate composition, fungal species, and processing conditions, which makes property optimisation challenging. In this study, an artificial neural network (ANN) model was developed to predict two mechanical properties of MBBs, namely internal bonding (IB) and compressive strength (CS). An ANN model was trained on experimental data, using the substrate composition, fungal species, and physical properties of MBBs. The ANN predictions were compared with measured values, and the model accuracy was evaluated. The results showed that the ANN achieved a high predictive accuracy, with coefficients of determination of 0.992 for IB and 0.979 for CS. IB values were predicted more precisely than CS, likely due to microstructural heterogeneities. The heterogeneities were visualised using scanning electron microscopy. Composites produced with Ganoderma sessile and Trametes versicolor exhibited the highest IB. Interestingly, Trametes versicolor achieved the highest CS on virgin wood particles but the lowest values on recycled wood, underlining the strong influence of the substrate quality. The study demonstrates that ANNs can effectively predict the mechanical properties, reducing the number of experimental tests needed for material characterisation. Full article

The antifungal effect of catechin and extractives from Prosopis juliflora was studied against one white rot fungus, Trametes versicolor (TV), and one brown rot fungus, Poria placenta (PP). The mentioned extractives from Prosopis julilfora were crude mesquitol and pure mesquitol. Tebuconazole was used in this study as a known fungicide against the two named fungi. Wood preservation using the current synthetic fungicides can be harmful to the environment and toxic to animals and plants. To help solve these problems, fungicides can be mixed with natural extractives to act synergistically as wood preservatives. Most of these natural extractives contain polyphenols, which are secondary metabolites, having good antioxidant properties, which may inhibit radical species involved in wood cell polymer defects. In this study, 1000 ppm and 5000 ppm of crude mesquitol, pure mesquitol and catechin had a very good growth inhibition against TV and PP. Thus, the concentrations were used to assess their synergistic response when mixed with lower inhibitory concentration of tebuconazole. The results showed that there was an additive effect in a combination of 0.1 ppm tebuconazole with 1000 ppm pure mesquitol for PP, 0.5 ppm Tebuconazole with 1000 ppm crude mesquitol and pure mesquitol for PP and 0.5 ppm tebuconazole with 1000 ppm pure mesquitol for TV. The other remaining combinations of 1000 ppm/5000 ppm of the samples with 0.1 ppm/0.5 ppm tebuconazole all had synergistic effect. This data suggests that a combination of polyphenols (catechin and extractives) with tebuconazoles can be useful sources for preparation of fungicides and wood preservatives for agricultural use and wood durability, respectively. Full article

The discharge of synthetic dyes from industries poses severe environmental challenges, necessitating eco-friendly remediation strategies. This study investigated the biosorption of triarylmethane dyes Crystal Violet (CV), and Brilliant Green (BG) using self-immobilized and sponge-immobilized biosorbents of Trametes versicolor (strain CB8, CB8/S2) and Pleurotus ostreatus (strain BWPH, BWPH/S2). Tests were conducted with live and autoclaved biomass under varying conditions of dye concentration (100–400 mg/L), temperature (15–55 °C), and pH (2–10). Sponge-immobilized live biomass (CB8/S2 and BWPH/S2) showed superior performance, removing up to 90.3% and 81.7% of BG and 43.9% and 39.3% of CV, respectively, within 6 h, demonstrating 3–5 times higher efficiency than self-immobilized biomass for both dyes. Maximum sorption of 379.4 mg/g of BG and 48.9 mg/g of CV was achieved by CB8/S2 at 400 mg/L. Principal Component Analysis biplot confirmed immobilization efficacy, where Dim1 (85.9–91.8% variance) dominated dye concentration and contact time. The optimized conditions for BG removal by CB8/S2 was 20.85–32.17 °C and pH 3.4–6, and for CV, at pH 6.5–7.5 and 30 °C. The percentage of dye sorption data fitted well with the quadratic model (p < 0.05). Fourier transform infrared spectroscopy (FT-IR) analysis indicated that hydrogen bonding and electrostatic interactions facilitated dye binding onto fungal mycelium. Notably, sponge-immobilized biosorbents were reusable without additional treatment. The findings support fungal biomass immobilization as a viable strategy to augment the bioremediation potential in treating dye-laden wastewater. Full article