Search Results (318)

Extreme surface winds and wave heights of tropical cyclones (TCs)—pose serious threats to coastal community, infrastructure and environments. In recent decades, progress in numerical wave modeling has significantly enhanced the ability to reconstruct and predict wave behavior. This review offers an in-depth overview of TC-related wave modeling utilizing different computational schemes, with a special attention to WAVEWATCH III (WW3) and Simulating Waves Nearshore (SWAN). Due to the complex air–sea interactions during TCs, it is challenging to obtain accurate wind input data and optimize the parameterizations. Substantial spatial and temporal variations in water levels and current patterns occurs when coastal circulation is modulated by varying underwater topography. To explore their influence on waves, this study employs a coupled SWAN and Finite-Volume Community Ocean Model (FVCOM) modeling approach. Additionally, the interplay between wave and sea surface temperature (SST) is investigated by incorporating four key wave-induced forcing through breaking and non-breaking waves, radiation stress, and Stokes drift from WW3 into the Stony Brook Parallel Ocean Model (sbPOM). 20 TC events were analyzed to evaluate the performance of the selected parameterizations of external forcings in WW3 and SWAN. Among different nonlinear wave interaction schemes, Generalized Multiple Discrete Interaction Approximation (GMD) Discrete Interaction Approximation (DIA) and the computationally expensive Wave-Ray Tracing (WRT) A refined drag coefficient (C_d) equation, applied within an upgraded ST6 configuration, reduce significant wave height (SWH) prediction errors and the root mean square error (RMSE) for both SWAN and WW3 wave models. Surface currents and sea level variations notably altered the wave energy and wave height distributions, especially in the area with strong TC-induced oceanic current. Finally, coupling four wave-induced forcings into sbPOM enhanced SST simulation by refining heat flux estimates and promoting vertical mixing. Validation against Argo data showed that the updated sbPOM model achieved an RMSE as low as 1.39 m, with correlation coefficients nearing 0.9881. Full article

The dry conversion of CO₂ into CO and O₂ provides an attractive path for CO₂ utilization which allows for the use of the CO produced for the synthesis of valuable hydrocarbons. In the following work, the CO₂ conversion is driven by an arc discharge at atmospheric pressure, producing hot plasma. This study presents a series of experiments aiming to optimize the process. The results obtained include the energy efficiency and the conversion rate of the process, as well as the electrical parameters of the discharge (current and voltage signals). In addition, optical emission spectroscopy diagnostics based on an analysis of C₂’s Swan bands are used to determine the gas temperature in the discharge. The data is analyzed according to several aspects—an analysis of the arc’s motion based on the electrical signals; an analysis of the effect of the gas flow and the discharge current on the discharge performance for CO₂ conversion; and an analysis of the vibrational and rotational temperatures of the arc channel. The results show significant improvements over previous studies. Relatively high gas conversion and energy efficiency are achieved due to the arc acceleration caused by the Lorentz force. The rotational (gas) temperatures are in the order of 5500–6000 K. Full article

High-precision wave data serve as a foundation for investigating the wave characteristics of the East China Sea (ECS) and wave energy development. Based on the simulating waves nearshore (SWAN) model, this study uses the ERA5 (ECMWF Reanalysis v5) reanalysis wind field data and ETOPO1 bathymetric data to perform high-precision simulations at a resolution of 0.05° × 0.05° for the waves in the area of 25–35° N and 120–130° E in the ECS from 2009 to 2023. The simulation results indicate that the application of the whitecapping dissipation parameter Komen and the bottom friction parameter Collins yields an average RMSE of 0.374 m and 0.369 m when compared to satellite-measured data, demonstrating its superior suitability for wave simulation in shallow waters such as the ESC over the other whitecapping dissipation parameter, Westhuysen, and the other two bottom friction parameters, Jonswap and Madsen, in the SWAN model. The monthly average significant wave height (SWH) ranges from 0 to 3 m, exhibiting a trend that it is more important in autumn and winter than in spring and summer and gradually increases from the northwest to the southeast. Due to the influence of the Kuroshio current, topography, and events such as typhoons, areas with significant wave heights are found in the northwest of the Ryukyu Islands and north of the Taiwan Strait. The wave energy flux density in most areas of the ECS is >2 kW/m, particularly in the north of the Ryukyu Islands, where the annual average value remains above 8 kW/m. Because of the influence of climate events such as El Niño and extreme heatwaves, the wave energy flux density decreased significantly in some years (a 21% decrease in 2015). The coefficient of variation of wave energy in the East China Sea exhibits pronounced regional heterogeneity, which can be categorized into four distinct patterns: high mean wave energy with high variation coefficient, high mean wave energy with low variation coefficient, low mean wave energy with high variation coefficient, and low mean wave energy with low variation coefficient. This classification fundamentally reflects the intrinsic differences in dynamic environments across various maritime regions. These high-precision numerical simulation results provide methodological and theoretical support for exploring the spatiotemporal variation laws of waves in the ECS region, the development and utilization of wave resources, and marine engineering construction. Full article

Webbed-foot gliding water entry is a characteristic water-landing strategy employed by swans and other large waterfowls, demonstrating exceptional low-impact loading and remarkable motion stability. These distinctive biomechanical features offer significant potential for informing the design of cross-medium vehicles’ (CMVs’) water-entry systems. To analyze the hydrodynamic mechanisms and flow characteristics during swan webbed-foot gliding entry, the three-dimensional bionic webbed-foot water-entry process was investigated through a computational fluid dynamics (CFD) method coupled with global motion mesh (GMM) technology, with a particular emphasis on elucidating the regulatory effects of entry parameters on dynamic performance. The results demonstrated that the gliding water-entry process can be divided into two distinct phases: stable skipping and surface gliding. During the stable skipping phase, the motion trajectory exhibits quasi-sinusoidal periodic fluctuations, accompanied by multiple water-impact events and significant load variations. In the surface-gliding phase, the kinetic energy of the bionic webbed foot progressively decreases while maintaining relatively stable load characteristics. Increasing the water-entry velocity will enhance impact loads while simultaneously increasing the skipping frequency and distance. Increasing the water-entry angle will primarily intensify the impact load magnitude while slightly reducing the skipping frequency and distance. An optimal pitch angle of 20° provides maximum glide-skip stability for the bio-inspired webbed foot, with angles exceeding 25° or below 15° leading to motion instability. This study on webbed-foot gliding entry behavior provided insights for developing novel bio-inspired entry strategies for cross-medium vehicles, while simultaneously advancing the optimization of impact-mitigation designs in gliding water-entry systems. Full article

This study investigates the combined effects of mesoscale eddies and rough sea surfaces on acoustic propagation in the eastern Arabian Sea and Gulf of Aden during summer monsoon conditions. Utilizing three-dimensional sound speed fields derived from CMEMS data, sea surface spectra from the SWAN wave model validated by Jason-3 altimetry, and the BELLHOP ray-tracing model, we quantify their synergistic impacts on underwater sound. A Monte Carlo-based dynamic sea surface roughness model is integrated with BELLHOP to analyze multiphysics interactions. The results reveal that sea surface roughness significantly influences surface duct propagation, increasing transmission loss by approximately 20 dB compared to a smooth sea surface, while mesoscale eddies deepen the surface duct and widen convergence zones by up to 5 km. In deeper waters, eddies shift convergence zones and reduce peak sound intensity in the deep sound channel. These findings enhance sonar performance and underwater communication in dynamic, monsoon-influenced marine environments. Full article

The primary contribution of this study lies in analyzing the dynamic drivers during two anomalous sea level rise events in the Bohai Sea through coupled numeric modeling using the Weather Research and Forecasting (WRF) model and the Finite-Volume Community Ocean Model (FVCOM) integrated with the Simulating Waves Nearshore (SWAN) module (hereafter referred to as FVCOM-SWAVE). WRF-derived wind speeds (0.05° grid resolution) were validated against Haiyang-2 (HY-2) scatterometer observations, yielding a root mean square error (RMSE) of 1.88 m/s and a correlation coefficient (Cor) of 0.85. Similarly, comparisons of significant wave height (SWH) simulated by FVCOM-SWAVE (0.05° triangular mesh) with HY-2 altimeter data showed an RMSE of 0.67 m and a Cor of 0.84. Four FVCOM sensitivity experiments were conducted to assess drivers of sea level rise, validated against tide gauge observations. The results identified tides as the primary driver of sea level rise, with wind stress and elevation forcing (e.g., storm surge) amplifying variability, while currents exhibited negligible influence. During the two events, i.e., 20–21 October and 25–26 August 2024, elevation forcing contributed to localized sea level rises of 0.6 m in the northern and southern Bohai Sea and 1.1 m in the southern Bohai Sea. A 1 m surge in the northern region correlated with intense Yellow Sea winds (20 m/s) and waves (5 m SWH), which drove water masses into the Bohai Sea. Stokes transport (wave-driven circulation) significantly amplified water levels during the 21 October and 26 August peak, underscoring critical wave–tide interactions. This study highlights the necessity of incorporating tides, wind, elevation forcing, and wave effects into coastal hydrodynamic models to improve predictions of extreme sea level rise events. In contrast, the role of imposed boundary current can be marginalized in such scenarios. Full article

PLAC8, expressed by interstitial extravillous trophoblasts (iEVTs), plays a crucial role in trophoblast invasion, differentiation, and immunotolerance. Its dysregulation may contribute to pregnancy complications, such as preeclampsia. This study investigates the role of PLAC8 in trophoblast invasiveness and endothelial-like differentiation under different oxygen tensions. Swan-71 cells were transiently transfected with PLAC8 overexpression or knockdown plasmids. Invasion was assessed using Matrigel-coated transwells, endothelial-like differentiation through tube formation assays, and vasculogenic marker expression (VEGF, PGF, ANGPT2) by RT-PCR. Hypoxia experiments were performed at different oxygen conditions. PLAC8 overexpression enhanced trophoblast invasion but reduced endothelial-like differentiation, downregulating VEGF and PGF while upregulating ANGPT2. Hypoxia increased PLAC8 expression, indicating oxygen tension as a regulatory factor. PLAC8 manipulation did not affect cell viability. PLAC8 modulates trophoblast behavior by promoting invasion while inhibiting endothelial-like differentiation. Its regulation of vasculogenic and angiogenic factors suggests a critical role in placental homeostasis and potential relevance to pregnancy disorders, such as preeclampsia. Full article

The northern Portuguese coast has been increasingly subjected to wave-induced coastal flooding, highlighting a critical need for comprehensive overwash assessment in the region. This study systematically evaluates the total water levels (TWLs) and swash regimes over a 120 km stretch of the northern coast of Portugal. Traditional approaches to overwash assessment often rely on detailed models and location-specific data, which can be resource-intensive. The presented methodology addresses these limitations by offering a pragmatic balance between accuracy and practicality, suitable for extended coastal areas with reduced human and computational resources. A coastal digital terrain model was used to extract essential geomorphological features, including the dune toe, dune crest, and/or crown of defense structures, as well as the sub-aerial beach profile. These features help establish a critical threshold for flooding, alongside assessments of beach slope and other relevant parameters. Additionally, a wave climate derived from a SWAN regional model was integrated, providing a comprehensive time-series hindcast of sea-states from 1979 to 2023. The wave contribution to TWL was considered by using the wave runup, which was calculated using different empirical formulas based on SWAN’s outputs. Astronomical tides and meteorological surge—the latter reconstructed using a long short-term memory (LSTM) neural network—were also integrated to form the TWL. This integration of geomorphological and oceanographic data allows for a straightforward evaluation of swash regimes and consequently overwash potential. The accuracy of various empirical predictors for wave runup, a primary hydrodynamic factor in overwash processes, was assessed. Several reports from hazardous events along this stretch were used as validation for this method. This study further delineates levels of flooding hazard—ranging from swash and collision to overwash at multiple representative profiles along the coast. This regional-scale assessment contributes to a deeper understanding of coastal flooding dynamics and supports the development of targeted, effective coastal management strategies for the northern Portuguese coast. Full article

Pasteurella multocida is a zoonotic pathogen responsible for severe diseases in domestic and wild animals, posing threats to public health and causing substantial economic losses. Here, we describe a naturally attenuated P. multocida strain, FCF147, isolated from a mortality event involving black-necked swans (Cygnus melancoryphus) in a wildlife habitat in Fujian, China. Genomic and phylogenetic analyses revealed that FCF147 is evolutionarily distant from other P. multocida lineages and lacks the entire capsule gene cluster. Morphological observations revealed that the loss of the capsule exposed proteins on the bacterial surface. Phenotypic characterization demonstrated reduced capsule production, enhanced biofilm formation, and increased tolerance to heat stress. In vivo infection models confirmed that FCF147 exhibits markedly attenuated virulence in both mice and poultry. However, immunization with FCF147 did not provide effective protection against the challenge of a virulent capsular type A strain. These findings suggest that while FCF147 is poorly virulent, its ability to form robust biofilms and survive thermal stress may facilitate persistence in wild bird reservoirs and potential transmission routes. These findings offer novel insights into the ecological adaptation and pathogenic potential of naturally capsule-deficient P. multocida in wildlife, highlighting their relevance to wildlife surveillance and disease ecology. Full article

As Canada’s population ages and disability prevalence increases, understanding the built environment’s impact on mobility and social participation is essential. This study evaluates the measurement properties of the Stakeholders’ Walkability/Wheelability Audit in Neighbourhoods (SWAN) tool, a user-led instrument designed to assess environmental factors affecting older adults and individuals with disabilities. Using community-based participatory research, we recruited 54 participants from five cities to assess the SWAN tool’s inter-rater reliability, construct validity, and internal consistency. The results indicated a high overall inter-rater reliability of 85.22%, with substantial Cohen’s Kappa coefficients across domains, particularly in the Safety domain (0.73). The construct validity was confirmed through moderate to strong correlations with established measures, notably a correlation of 0.79 between the Street Crossing subdomain and the Sidewalk Index. The internal consistency analysis showed excellent reliability in the Functionality domain (α = 0.95) and a lower consistency value in the Social Environment domain (α = 0.63), suggesting the need for further refinement. These findings provide preliminary evidence of the SWAN tool’s potential for evaluating neighbourhood accessibility. By identifying barriers and facilitators to mobility, the SWAN tool can guide urban planning efforts aimed at creating inclusive environments for aging populations and individuals with disabilities. Future research should focus on larger samples to explore structural validity. Ultimately, the SWAN tool can contribute to improving the quality of life of vulnerable populations and promote more equitable urban policy development. Full article

Typhoons generate extreme waves that pose significant threats to offshore wind power platforms in deep-sea areas, a challenge not fully addressed in current design standards. This study investigates wind–wave coupling processes during typhoon events to provide guidance for typhoon selection in deep-sea wind power platform design. Using Pearson Type III frequency analysis of typhoon data from 1949 to 2019, the 50-year return period typhoon intensity was determined for the study area. The validated SWAN model was employed to simulate typhoon-induced waves, revealing that wave height contours align parallel to the coastline and increase sharply from nearshore to deep-sea areas. The maximum significant wave height reaches 7.78 m when a 50-year return period typhoon passes the engineering site. These findings offer critical insights for offshore wind farm design in typhoon-prone regions, providing a robust basis for wave load assessment, structural fatigue analysis, and safety optimization. Full article

The Weather Research and Forecasting (WRF) model is employed to conduct numerical simulations and simulated acquisition of a 30-year (1993–2022) wind field dataset for the Bohai Sea. The simulated WRF wind field is subsequently used to drive the Simulating Waves Nearshore (SWAN) model, producing a corresponding wave field dataset for the same period in the Bohai Sea. Using these datasets, we analyzed the extreme value distributions of wind speed and significant wave height in the study area. The results reveal that both the annual mean wind speed and significant wave height exhibit a ring-like spatial pattern. The highest values are concentrated in the southern Liaodong Bay to the central Bohai Sea region, with a gradual radial decrease toward the periphery. Specifically, values decline from the center outward, from southeast to northwest, and from offshore to nearshore regions. The Gumbel extreme value distribution is applied to estimate 100-year return period extremes, yielding maximum wind speeds of 37 m/s and significant wave heights of 6 m in offshore areas. In nearshore regions, the 100-year return period wind speeds range between 20–25 m/s, while significant wave heights vary from 2 to 3 m. This study provides important scientific basis and decision-making reference for the design of offshore extreme conditions. Full article

Anseriformes represent a basal order in the phylogeny of neognath birds and are of particular interest in cytogenetic research due to their distinctive chromosomal features. However, aspects of their chromosomal evolution, such as the distribution and organization of microsatellite sequences, remain poorly understood. Given the role of these dynamic repetitive sequences in chromosome organization, differentiation, and evolution, we analyzed microsatellite distribution in three Anatidae species, each representing a different subfamily: Amazonetta brasiliensis-Brazilian Teal (Anatinae), Coscoroba coscoroba-Coscoroba Swan (Anserinae), and Dendrocygna viduata-White-faced Whistling Duck (Dendrocygninae). This is the first karyotypic description for White-faced Whistling Duck (2n = 78) and Brazilian Teal (2n = 80), whereas Coscoroba Swan, previously analyzed, exhibits a notably high diploid number (2n = 98). Despite sharing a similar macrochromosome morphology, the three showed differences in diploid numbers and microsatellite distribution. Extensive microsatellite accumulation was found in both autosomal and sex chromosomes (Z and W) of Brazilian Teal and Coscoroba Swan, while White-faced Whistling Duck displays minimal hybridization signals and an absence of microsatellites on the sex chromosomes. The accumulation of specific microsatellites, such as (CAC)₁₀ and (GAG)₁₀, in centromeric and pericentromeric regions suggests an association with transposable elements, potentially driving chromosomal evolution. Notably, the substantial accumulation of these sequences on the Z and W chromosomes of Brazilian Teal and Coscoroba Swan, but not White-faced Whistling Duck, supports the hypothesis that repetitive sequence expansion occurs in a species-specific manner, contributing to sex chromosome differentiation. These findings highlight microsatellite mapping as a valuable tool for understanding chromosomal evolution and genomic differentiation in Anseriformes. Full article

Literary works of contemporary Australian Aboriginal writers are widely read for their engagement with expressions of resilience and resistance against colonial supremacy. But these works have a greater significance in modern times, as they carry forward the Aboriginal cultural traditions of caring for the country (an Aboriginal concept that comprises people, their culture, and all living and non-living entities in a place, including the land) and in vocalising the concerns that arise from grief for the loss of the natural environment. This paper investigates how Alexis Wright, in her postmillennial novels Carpentaria (2006) and The Swan Book (2013), redefines dominant ethical and aesthetic frameworks and tries to delineate ecoethics in these novels through a critical analysis of the representation of relationality and interconnectedness between Aboriginal people and their natural environment. By exploring the Aboriginal belief system as represented in the texts and its role in shaping Aboriginal environmental values, this paper argues that Carpentaria and The Swan Book embody ecoethics and offer a reimagining of deep ecological perspectives in contemporary literature. Full article

This paper describes and implements a time-spatial correction of the regional prediction wave system, compared with altimeter data, by using an ensemble Kalman filter. The technique is successful in areas with substantial wave height around the Azores islands. Using winds from ERA5 and wave spectral boundary conditions from a prior study, the SWAN wave model generates wave conditions in the Azores area for 6 years. The time-spatial correction model is determined by comparing the hindcast data with the data from seven altimetry satellites: ERS-1, ERS-2, ENVISAT, TOPEX/POSEIDON, Jason-1, Jason 2, and GEOSAT Follow ON. The hindcast results are then corrected with the correction model. Furthermore, in situ buoy measurements are then employed to validate the corrected hindcast data. The outcomes demonstrate a significant improvement in the wave predictions. Full article