Search Results (45)

Background/Objectives. Flavonoids are a vast class of phenolic substances. To date, approximately 6000 plant-origin flavonoids have been discovered, with many of them being used in drug therapy. Therapeutic flavonoids are commonly formulated to conventional “one-size-fits-all” dosage forms, such as conventional tablets or hard capsules. However, the current trends in pharmacy and medicine are centred on personalised drug therapy and drug delivery systems (DDSs). Therefore, 3D printing is an interesting technique for designing and preparing novel personalised pharmaceuticals for flavonoids. The aim of the present study was to develop aqueous polyethylene oxide (PEO) gel inks loaded with rutin for semisolid extrusion (SSE) 3D printing. Methods. Rutin (a model substance for therapeutic flavonoids), Tween 80, PEO (MW approx. 900,000), ethanol, and purified water were used in PEO gels at different proportions. The viscosity and homogeneity of the gels were determined. The rutin–PEO gels were printed with a bench-top Hyrel 3D printer into lattices and discs, and their weight and effective surface area were investigated. Results. The key SSE 3D-printing process parameters were established and verified. The results showed the compatibility of rutin as a model flavonoid and PEO as a carrier polymer. The rutin content (%) and content uniformity of the 3D-printed preparations were assayed by UV spectrophotometry and high-performance liquid chromatography (HPLC). Conclusions. The most feasible aqueous PEO gel ink formulation for SSE 3D printing contained rutin 100 mg/mL and Tween 80 50 mg/mL in a 12% aqueous PEO gel. The 3D-printed dosage forms are intended for the oral administration of flavonoids. Full article

An effective deposition of a cinchonine layer on a platinum metal surface can be easily achieved through the cathodic reduction of a cinchonine hydrochloride methanolic solution at a controlled potential of −220 mV vs. the silver standard electrode (SSE). A coated screen-printed platinum electrode has proven to be suitable for cinchonine determination in water, urine, and serum at µg L⁻¹ concentration levels using differential pulse voltammetry in a phosphate buffer solution (pH 7.0). The limits of detection (LOD) and quantitation (LOQ) were 0.6 µg L⁻¹ and 1.8 µg L⁻¹, respectively. Full article

Background/Objectives: Leishmaniasis is one of the 20 Neglected Tropical Diseases according to the WHO, affecting approximately 12 million people in four continents, generating serious public health problems. The lack of therapeutic options, associated with toxicity and the emergence of resistance to the few available drugs, makes it urgent to develop new drug options. In this context, the aims of this work are to expand the knowledge about the pharmacophore group responsible for the antileishmanial potential of 2-aminothiophene derivatives. Thus, new compounds were synthesized containing chemical modifications at the C-3, C-4, and C-5 positions of the 2-aminothiophene ring, in addition to the S-Se bioisosterism. Methods: Dozens of 2-AT and 2-aminoselenophen (2-AS) derivatives were sequentially synthesized through applications of the Gewald reaction and were then evaluated in vitro for their activities against L. amazonensis and for cytotoxicity against macrophages. Results: Several series of compounds were synthesized, and it was possible to identify some substitution patterns favorable to the activity generating compounds with IC₅₀ values below 10 µM, such as the non-essentiality of the presence of a carbonitrile group at C-3; the importance of the presence and size of cycloalkyl/piperidinyl chains at C-4 and C-5 in modulating the activity; and the increase in activity without affecting the safety of the S/Se bioisosteric substitution. Conclusions: Taken together, these findings reaffirm the great potential of 2-aminothiophenes to generate antileishmanial drug candidates and offers contributions to the drug design of compounds with an even more promising profile for the problem of leishmaniasis. Full article

Accurate photosynthetic parameters obtained from photosynthetic light-response curves (LRCs) are crucial for enhancing our comprehension of plant photosynthesis. However, the task of fitting LRCs is still demanding due to diverse variations in LRCs under different environmental conditions, as previous models were evaluated based on a limited number of leaf traits and a small number of LRCs. This study aimed to compare the performance of nine LRC models in fitting a set of 108 LRCs measured from paddy rice (Oryza sativa L.) grown in field across 3 years under different leaf positions, leaf ages, nitrogen levels, irrigation levels, and varieties. The shape of 108 LRCs varies significantly under a range of leaf traits, which can be typed into three leaf light-acclimation types—high-light leaves (HL-1 and HL-2), and low-light leaves (LL). The accuracy of these models was evaluated by (1) LRCs from three acclimation types: HL-1 and HL-2, and LL; and (2) LRCs across three irradiance stages: light-limited, light-saturated, and photoinhibition. Results indicate that the Ye model emerged as the top performance among the nine models, particularly in the photoinhibition stage of LL leaves, with median values of R², SSE, and AIC of 0.99, 2.39, and −14.03, respectively. Furthermore, the Ye model produced the most accurate predictions of key photosynthetic parameters, including dark respiration (R_D), light-compensation point (I_comp), maximum net photosynthetic rate (P_Nmax), and light-saturation point (I_sat). Results also suggest that P_NImax and I_max were the most appropriate parameters to describe photosynthetic activity at the light-saturation point. These findings have significant implications for improving the accuracy of fitting LRCs, and thus robust predictions of photosynthetic parameters in rice under different environmental conditions. Full article

Background/Objectives: Paediatric eosinophilic oesophagitis (EoE) treatment is challenging due to the limited number of age-appropriate formulations. This study aims to develop and evaluate oral viscous suspensions and solid formulations of budesonide (BUD), focusing on their in vitro mucoadhesive properties, to enhance drug delivery and therapeutic outcomes in paediatric EoE. Methods: This study encompasses the development of oral viscous suspensions and orodispersible solid formulations (moulded tablets and 3D-printed dosage forms) containing BUD. The formulations underwent quality control tests as per the European Pharmacopoeia, chemical stability assessments, and an in vitro evaluation of their mucoadhesiveness properties. Results: A validated analytical method enabled accurate BUD quantification and efficient extraction, and all developed formulations demonstrated chemical stability for 30 days, meeting Ph. Eur. quality standards. Three-dimensional printing using SSE successfully produced 1 mg and 0.5 mg BUD printlets, complying with quality tests for conventional tablets. Formulations containing xanthan gum (L2-XG and P1-0.5-XG) exhibited superior mucoadhesive properties. L2-XG showed significantly higher mucoadhesion than L1-MC. Among the solid formulations, P1-0.5-XG demonstrated the highest mucoadhesive properties. Conclusions: This is the first study to develop solid oral dosage forms of BUD at a very low dose, specifically for paediatric use. The results highlight the potential of 3D printing for developing individualised orodispersible BUD formulations with improved bioadhesion for paediatric EoE treatment. The L2-XG formulation and the XG-containing printlets are the most promising formulations in terms of increasing contact time with the oesophageal mucosa, which could translate into improved therapeutic efficacy in this patient population. Full article

Background: Quality of life (QoL) is crucial for young adults with posterior urethral valves (PUV). This study investigates the impact of lower urinary tract symptoms (LUTS) on their quality of life and sexual health, including self-efficacy. Methods: Patients aged 16 and older treated for PUV completed four validated questionnaires (Sexual Self-Efficacy Scale (SSES-E), ICIQ MLUTS, ICIQ MLUTSsex, ICIQ LUTSqol) and an individual health questionnaire. Results: Eighteen (52.9%) patients responded, with a median age of 23 years (IQR 18–26). Three had terminal renal failure; two were transplanted. Thirteen urinated naturally; five used a stoma. Sixteen had mild and two had moderate LUTS. Fifteen patients completed the SSES-E, scoring an average of 80, similar to the healthy cohort (83). Renal failure or catheterization did not significantly affect the overall score. In the ICIQ MLUTSsex, patients reported no significant impact of LUTS on sexuality. However, those with moderate LUTS had lower self-efficacy than those with mild symptoms (mean 75 vs. 84). Conclusions: Although quality of life and sexual function do not appear to be significantly impaired, LUTS are common and appear to be associated with a decreased SSE in our cohort. This should be particularly considered during the transition to adult care. Full article

Ni-based superalloys are widely used in aerospace applications. However, traditional constitutive equations often lack the necessary accuracy to predict their high-temperature behavior. A novel constitutive model, utilizing Taylor series expansions and partial derivatives, is proposed to predict the high-temperature flow behavior of a nickel-based superalloy. Hot compression tests were conducted at various strain rates (0.01 s⁻¹, 0.1 s⁻¹, 1 s⁻¹, and 10 s⁻¹) and temperatures (850 °C to 1200 °C) to gather comprehensive experimental data. The performance of the new model was evaluated against classical models, specifically the Arrhenius and Hensel–Spittel (HS) models, using metrics such as the correlation coefficient (R), root mean square error (RMSE), sum of squared errors (SSE), and sum of absolute errors (SAE). The key findings reveal that the new model achieves superior prediction accuracy with an R value of 0.9948 and significantly lower RMSE (22.5), SSE (16,356), and SAE (5561 MPa) compared to the Arrhenius and HS models. Additionally, the stability of the first-order partial derivative of logarithmic stress with respect to temperature ($\partial \mathrm{l}\mathrm{n}\sigma /\partial T$) indicates that the logarithmic stress–temperature relationship can be approximated by a linear function with minimal curvature, which is effectively described by a second-degree polynomial. Furthermore, the relationship between logarithmic stress and logarithmic strain rate ($\partial \mathrm{l}\mathrm{n}\sigma /\partial \mathrm{l}\mathrm{n}\dot{\epsilon }$) is more precisely captured using a third-degree polynomial. The accuracy of the new model provides an analytical basis for finite element simulation software. This helps better control and optimize processes, thus improving manufacturing efficiency and product quality. This study enables the optimization of high-temperature forming processes for current superalloy products, especially in aerospace engineering and materials science. It also provides a reference for future research on constitutive models and high-temperature material behavior in various industrial applications. Full article

In this research, TiO₂ nanotubes (NTs) were produced by electrochemical anodization of a Ti substrate where different NH₄F wt.% in the electrolyte was added. NTs with diameter of 65–90 nm and 3.3–4.9 µm length were obtained and sensitized with binary cadmium chalcogenides nanoparticles, CdS and CdSe, by successive ionic layer adsorption and reaction method (SILAR). Additionally, both anions S and Se were deposited onto Cd, labeled as CdSSe and CdSeS, to evaluate the effect of the deposition order of the anion from the precursor solution to form cadmium chalcogenides. The structural, optical, and electrochemical performance were analyzed through the SEM, XRD, XPS, UV-VIS, lineal voltammetry and chronoamperometry characterizations. The increase of NH₄F wt.% from 1.5% to 4.5% produced a decrement of the diameter and length attributed to the fluoride ions concentration causing solubility of the NTs. XRD confirmed the TiO₂ anatase and hexagonal CdS structures. From the EDS and XPS results, the presence of small amount of Se in the sensitized samples demonstrated the doping effect of Se instead of forming ternary semiconductor. With the sensitization of the TiO₂ NTs with the nanoparticles, an improved hydrogen generation was observed (reaching 1.068 mL h⁻¹ cm⁻²) in the sample with CdSSe. The improvement was associated to a synergetic effect in the light absorption and higher cadmium chalcogenide amount deposited when sulfur ions were deposited before selenium. Full article

Due to the growing concerns about pharmaceutical contamination and its devastating impact on the economy and the health of humans and the environment, developing efficient approaches for removing such contaminants has become essential. Adsorption is a cost-effective technique for removing pollutants. Thus, in this work, banana peels as agro-industrial waste were utilized for synthesizing activated carbon for removing pharmaceuticals, namely amoxicillin and carbamazepine from different water matrices. The chemically activated carbon by phosphoric acid (H₃PO₄) was carbonized at temperatures 350 °C, 450 °C and 550 °C. The material was characterized by several techniques such as scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), Boehm titration, point of zero charge (pH_PZC), BET surface area (S_BET), the proximate and ultimate analyses, X-ray powder diffraction (XRD), and thermos-gravimetric analysis (TGA). The SEM of banana peel activated carbon (BPAC) depicted a semi-regular and heterogeneous morphology, characterized by an abundance of pores with diverse forms and sizes. Boehm titration revealed an increase in the amounts of acidic groups by 0.711 mmol/g due to activation by H₃PO₄. FTIR recorded different peaks suggesting significant modifications in the spectroscopic characteristics of the BPAC surface due to the successful activation and adsorption of the pollutant molecules. The pHpzc of BPAC was calculated to be 5.005. The S_BET surface area dramatically increased to 911.59 m²/g after the activation. The optimum conditions were 25 °C, a materials dosage of 1.2 g/L, a saturation time of 120 min, a pollutants mixture of 25 mg/L, and a pH of 5. Langmuir exhibits a slightly better fit than Freundlich with a low value of the residual sum of squares (SSE) and the data were better fitted to the pseudo-second-order kinetic. Furthermore, the efficacy of BPAC in eliminating pharmaceuticals from Milli Q water, lake water, and wastewater was successfully investigated over the seven cycles. The results of the present work highlighted a potential usage of agro-industrial waste in eliminating organic micropollutants while exhibiting sustainable management of this waste. Full article

Sulfur powder (99.99%) and selenium powder (99.99%) were mixed and heated to approximately 300 °C to obtain an S-Se alloy. It has good flowability at 130 °C and can be applied to Q235 steel to obtain a S-Se coating. Epoxy was used as a filler, and the S-Se alloy was applied as a coating. This combination was utilized to create the composite coatings of epoxy/sulfur–selenium (E/S-Se). To investigate the corrosion resistance of this coating on Q235 steel substrate, we conducted measurements and obtained electrochemical impedance spectra (EIS) and linear polarization curves (LPC). These measurements were performed in a three-electrode cell within an electrochemical workstation using a 3.5 wt.% NaCl aqueous solution. By comparing bare Q235 steel, S-Se, and E/S-Se, the study found that the E/S-Se coating had a higher self-corrosion potential (−0.484 V vs. SCE) and the lowest self-corrosion current density (2.361 × 10⁻¹¹ A/cm²). The purpose was to simulate the corrosive environment experienced by condensate return pipe walls in petroleum refining equipment. Additionally, experiments were carried out using 0.01 mol/L HCl solution as the corrosion medium at different temperatures (40 °C, 60 °C, 80 °C). The results indicated that the E/S-Se coating exhibited a lower corrosion rate compared to the Q235 steel substrate. Under immersion conditions at 40 °C and 60 °C, no corrosive substances were detected on the surface of the coating. The test results demonstrated that the E/S-Se coating exhibited superior corrosion resistance compared to the Q235 substrate, providing up to 99% protection for the substrate. Full article

The macroscopic structural fractures (joints) and geostress distribution characteristics of coal reservoirs are important factors affecting the exploitation of coalbed methane (CBM). In this study, the joints in the sedimentary strata of the Dahebian block in Liupanshui area, Guizhou Province were investigated. Directional coal samples were collected for observation and statistical analysis of coal microfractures, the paleotectonic stress fields of the study area were reconstructed, and the tectonic evolution was elucidated. The geostress distribution characteristics of the target coal seam (coal seam No. 11, P₃l) in the study area were analyzed using the finite element numerical simulation method. The results indicate that the structural evolution of the Dahebian syncline in the study area can be divided into two stages. The Late Jurassic–Early Cretaceous stage (Early Yanshanian) is the first stage. Affected by the sinistral strike slip of the Weining–Ziyun–Luodian (WZL) fault zone, the derived stress field in the study area exhibits maximum principal stress (σ₁) in the NEE–SWW direction. The Late Cretaceous stage (Late Yanshanian) is the second stage. Affected by the dextral strike slip of the WZL fault zone, the derived stress field exhibits σ₁ in the NNW–SSE direction. The folds and faults formed in the first stage were modified by the structural deformation in the second stage. The dominant strikes of joints in the sedimentary strata are found to be in the NW–NNW (300°–360°) and NE (30°–60°) directions, with dip angles mostly ranging from 60° to 90°. The dominant strikes of coal microfractures are in the NW (285°–304°) and NE (43°–53°) directions. The distribution of geostress in the study area is characterized by high levels of geostress in the syncline center, decreasing towards the surrounding periphery. The overall trend of the geostress contour line is similar to the shape of the syncline and is influenced by folds and faults. The σ₁ of coal seam No. 11 is vertical stress. The prediction results show that the joint density of coal seam No. 11 in the block is 36–50 joints/m, and the shape of the joint density contour line is also affected by the axial direction of the Dahebian syncline and the surrounding faults. The variation in coal seam joint density and the control effect of geostress on joints opening or closing affects the permeability of coal reservoirs. The study results provide significant guidance for the exploitation of CBM. Full article

This study evaluated 5 annual and 11 perennial Indian pasture legumes species for their nutritive value, dry matter and mineral contents and in vitro fermentation parameters. Legume species differed significantly (p < 0.05) in various nutritional aspects such as organic matter, crude protein (CP), ether extract, fibres and protein fractions. Perennial Clitoria ternateaa had higher (p < 0.05) buffer soluble protein (477), while neutral detergent soluble protein was highest in annually grown Lablab purpureus (420 g/kg CP). Atylosia scarabaeoides (AS) had higher levels of nonstructural carbohydrates (NSCs) (392 g/kg dry matter (DM)) than structural carbohydrates (SC) (367 g/kg DM). Its rapidly degradable fraction (51.7 g/kg (total carbohydrate) tCHO) was lower (p < 0.05) than other fractions of carbohydrates. Total digestible nutrients, digestible energy and metabolisable energy varied, with Desmodium virgatus (DV) having higher values and Stylosanthas seabrana (SSe) having the lowest. Predicted dry matter intake, digestible dry matter and relative feed value also showed significant differences (p < 0.05). Annual grasses such as Dolichos biflorus, Macroptilium atropurpureum, Rhynchosia minima (RM) were found to be better balanced with micro minerals. In vitro dry matter degradability, partition factor, short-chain fatty acids and microbial protein production of legumes varied significantly (p < 0.05). Gas and CH₄ production (mL/g and mL/g (digestible DM) DDM) also varied, with Clitoria ternatea-blue having the highest gas production and C. ternatea -white (CT-w) and AS having lower CH₄ production. Methane in total gas was low for DV, RM and CT-w (8.99%, 9.72% and 9.51%). Loss of DE and ME as CH₄ varied (p < 0.05) among the legumes. Each legume offers unique benefits, potentially allowing for tailored combinations of annual and perennial legumes to optimize rumen feed efficiency. Full article

Oil palm empty fruit bunch fibers (OPEFBF), in three size ranges (small: 250–450 µm, medium: 450–600 µm, large: 600–800 µm), were investigated as a filter-bed material in biofilters for the removal of organic matter and nutrients. After saturation, these fibers (post) were used in the removal of methylene blue through batch processes. The batch adsorption tests included optimizing the adsorbent dosage (0.5–32.0 g/L) and contact time (2.5–60.0 min). Experimental data were fitted to various kinetic/isotherm models. Instrumental characterization of both raw and post fibers was conducted. Post fibers underwent morphological/compositional changes due to the presence of microorganisms and their byproducts. Efficiencies reached up to 94% for chemical oxygen demand (COD), 88.4% for total nitrogen and 77.2% for total phosphorus. In batch adsorption, methylene blue removal exceeded 90%, underscoring the effectiveness of small raw OPEFBF and large post OPEFBF. Kinetic models indicated that raw OPEFBF better fit the pseudo-first-order model, while post OPEFBF better fit the pseudo-second-order model. Both types of OPEFBF showed a good fit with the Freundlich model (higher R², lower χ² and SSE). Particularly, large post OPEFBF stood out as the most efficient adsorbent, achieving a maximum adsorption capacity of 12.02 mg/g for methylene blue. Therefore, raw/post OPEFBF could be an alternative to remove contaminants from wastewater. Full article

This study focuses on investigating and comparing the influence of the surface functional groups and chemical matrices of macroporous resin on the Cr(III) exchange mechanism. The results discussed herein indicate that sulfonic resin removed Cr(III) ions with faster kinetics than carboxylic resin. Equilibrium was established within 15 and 7 min for the carboxylic and sulfonic resins, respectively, with a 99.5% removal efficiency at 333 K. The Langmuir exchange capacity was observed to be higher for the sulfonic resin (1.5 mmol∙g⁻¹) than the carboxylic resin (0.80 mmol∙g⁻¹) at 333 K. The adsorption isotherms obtained for the carboxylic and sulfonic resins were H and S types, respectively, representing a higher affinity of the carboxylic resin for Cr(III) removal at a low metal ion concentration. Additionally, it was noted that the carboxylic resin preferentially co-sorbed H⁺ and Cr(OH)²⁺ ions below Cr(III) concentrations of 6–8 mmol.L⁻¹. The H+ ions co-sorption was almost negligible, whereas the Cr(III) exchange was 87 and 34.5% for the carboxylic acid resin and sulfonic acid resins, respectively. The data of the concentration studies were evaluated using non-linear forms of Freundlich, Langmuir, and Dubinin–Radushkevich adsorption isotherm models, and the kinetic data were analyzed using pseudo-Ist- and pseudo-IIst-order kinetic models. The activation energy E_a for Amberlite IRC-50 (Na⁺) was greater (22.4 kJ∙mol⁻¹) than that of Amberlyst-15 (Na⁺) 17 kJ∙mol⁻¹, indicating a higher energy barrier for the ion exchange reaction on carboxylic resin. As per the findings of a statistical error analysis (RMSE and SSE) and absolute average relative distribution (AARD) statistical model, a close agreement between the experimental and theoretical values suggested that the Langmuir isotherm was well-fitted to the current adsorptive investigations. The interaction of the COO⁻ and SO³⁻ functional sites of the resins for the exchange of Cr(III) ions was validated through an FT-IR analysis. The macroporous resins used in the current study for Cr(III) exchange showed promising performances compared to other resins. The current investigations revealed valuable insights for choosing macroporous resins as adsorbents in water filtration systems. Full article

This study examined the effects of two different acute bouts of treadmill running (e.g., steady-state moderate-intensity exercise (SSE) and high-intensity interval exercise (HIIE)) on adipokine (e.g., adiponectin, leptin, and omentin) concentrations in individuals with moderate stages of chronic kidney disease (CKD). Fourteen participants (8 females and 6 males) (age 58.7 ± 9.7, height (cm) 168.5 ± 9.7, weight (kg) 83.5 ± 18.2) were classified as having moderate stages of CKD (stages G3a and G3b; estimated glomerular filtration rate (eGFR) between 59 and 30 mL/min/1.73 m²). Participants completed 30 min of either SSE at 65% oxygen consumption reserve (VO₂R) or HIIE for 3 min at a 90% VO₂R separated by 2 min of slow walking (20% VO₂R) in a randomized, crossover design on a treadmill. Venous blood samples were obtained at baseline, 1 h, and 24 h post exercise. Data were analyzed using a two by three repeated measures ANOVA (p < 0.05). There were no significant differences in adiponectin (p < 0.353), leptin (p < 0.084), and omentin (p < 0.235) concentrations between SSE and HIIE. Similarly, no significant differences were seen between the sampled time points for either aerobic exercise condition. In conclusion, this study demonstrated there were no changes in adiponectin, leptin, or omentin concentrations when performing an acute bout of HIIE or SSE for 30 min, at 1 or 24 h post exercise. Future studies should seek to either increase the duration of the exercise bout or identify different adipokines to examine for patients experiencing moderate stages of CKD. Full article