Search Results (33)

Among hole transport materials (HTMs), 2,2′,7,7′-Tetrakis(N,N-di-p-methoxyphenylamino)-9,9′-spirobifluorene (spiro-OMeTAD) is the most frequently adopted, due to its suitable energy band level in conventional-type perovskite solar cells (PSCs). However, the high price of spiro-OMeTAD is an obstacle faced in its research and commercialization. In our previous work, we introduced a low-cost HTM, (E,E,E,E)-4,4′,4″,4‴-[Benzene-1,2,4,5-tetrayltetrakis(ethene-2,1-diyl)]tetrakis[N,N-bis(4-methoxyphenyl)aniline] (α2); however, it was immiscible in the conventional solvent chlorobenzene, leading to the adoption of dichloromethane (DCM) as an alternative. Nevertheless, its high vapor pressure led to poor reproducibility, limiting its practical applicability. To address this issue, we investigated alternative solvents to DCM to facilitate the application of α2 to dichloride alkane materials, from 1,2-dichloroethane (DCE) to 1,4-dichlorobutane. In these materials, DCE exhibits the most superior properties in terms of layer formation control, due to its vapor pressure in spin-coating. Accordingly, a PSC containing α2-DCE HTL showed high performance, with 1.15V of open-circuit voltage and a 22.7% power conversion efficiency. Full article

At present, lead halide PVSKSCs are promising photovoltaic cells but have some limitations, including their low stability in ambient conditions and the toxicity of lead. Thus, it will be of great significance to explore lead-free perovskite materials as an alternative absorber layer. In recent years, the numerical simulation of perovskite solar cells (PVSKSCs) via the solar cell capacitance simulation (SCAPS) method has attracted the attention of the scientific community. In this work, we adopted SCAPS for the theoretical study of lead (Pb)-free PVSKSCs. A cesium bismuth iodide (CsBi₃I₁₀; CBI) perovskite-like material was used as an absorber layer. The thickness of the CBI layer was optimized. In addition, different electron transport layers (ETLs), such as titanium dioxide (TiO₂), tin oxide (SnO₂), zinc oxide (ZnO), and zinc selenide (ZnSe), and different hole transport layers, such as spiro-OMeTAD (2,2,7,7-tetrakis(N,N-di(4-methoxyphenylamine)-9,9′-spirobifluorene), poly(3-hexylthiophene-2,5-diyl) (P₃HT), poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA), and copper oxide (Cu₂O), were explored for the simulation of CBI-based PVSKSCs. A device structure of FTO/ETL/CBI/HTL/Au was adopted for simulation studies. The simulation studies showed the improved photovoltaic performance of CBI-based PVSKSCs using spiro-OMeTAD and TiO₂ as the HTL and ETL, respectively. An acceptable PCE of 11.98% with a photocurrent density (J_sc) of 17.360258 mA/cm², a fill factor (FF) of 67.10%, and an open-circuit voltage (V_oc) of 1.0282 V were achieved under the optimized conditions. It is expected that the present study will be beneficial for researchers working towards the development of CBI-based PVSKSCs. Full article

The pressure response of crystalline 9,9′-spirobifluorene up to 8 GPa was studied by means of Raman spectroscopy using a diamond anvil cell as a pressure chamber. With increasing pressure, the observed Raman peaks shifted to higher frequencies, reflecting the bond hardening upon volume reduction, which was much more pronounced for the initially weaker intermolecular interactions than for the stronger intramolecular covalent bonds. The significant changes in the Raman spectrum and the pressure evolution of the frequencies at ~1.3 GPa for both the intermolecular and the intramolecular Raman peaks signaled a pressure-induced structural and molecular conformation transition with a little hysteretic behavior (~0.5 GPa) upon pressure release. For P > 4 GPa, the reversible decrease of the pressure coefficients of the majority of the intermolecular and some intramolecular peak frequencies indicated another structural modification of the studied molecular crystal. A value of ~9 GPa for the bulk modulus of the system at zero pressure was estimated from the logarithmic pressure coefficients of the frequencies of the intermolecular modes in the low-pressure phase. These coefficients were reduced by ~6 times at 4.2 GPa, indicating that the considerable stiffening of the material in the high-pressure phase emanated from the selective strengthening of the intermolecular interactions. Full article

Organic/silicon hybrid solar cells have attracted much interest due to their cheap fabrication process and simple device structure. A category of organic substances, Dibenzothiophene–Spirobifluorene–Dithiophene (DBBT-mTPA-DBT), comprises dibenzo [d,b] thiophene and 3-(3-methoxyphenyl)-6-(4-methoxyphenyl)-9H-Carbazole, which function as electron donors. In contrast, methanone is an electron acceptor, with an ∆Est of 3.19 eV. This work focused on hybrid solar cells based on the guest–host phenomena of DBBT-mTPA-DBT and CBP. Using a Si/poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) hybrid solar cell with an ultra-thin Dibenzothiophene–Spirobifluorene–Dithienothiophene (DBBT-mTPA-DBT) interlayer between Si and Al led to a PCE of 17.5 ± 2.5%. The DBBT-mTPA-DBT interlayer substantially improved the Si/Al interface, reducing contact resistance from 6.5 × 10⁻¹ Ω·cm² to 3.5 × 10⁻² Ω·cm². This improvement increases electron transport efficiency from silicon to aluminum and reduces carrier recombination. The solar cell containing the DBBT-mTPA-DBT/Al double-layer cathode shows a 10.85% increase in power conversion efficiency relative to the standard Al cathode device. Full article

Exploring synthetic pathways for efficient photocatalysts has always been a major goal in catalysis. The performance of organic photocatalysts is affected by a variety of complex factors, and how to understand the structure–effect relationship is the key to designing efficient photocatalysts. This work explored the feasibility of constructing large-specific-surface-area conjugated microporous polymers (CMPs) based on stereoscopic units like spirobifluorene and achieving efficient photocatalytic activity by modulating the donor–acceptor (D-A) ratio with dibenzothiophene sulfone. Crosslinked pore structures were successfully constructed, and the specific surface area increased with the ratio of spirobifluorene. When the molar ratio of D-A was 1:20, polymer Spso-3 showed the highest photocatalytic hydrogen production activity, at 22.4 mmol h^–1 g^–1. The findings indicate that constructing D-A type CMPs should be a promising approach to improving the performance of photocatalytic water separation. The appropriate push–pull effect of the D-A structure promotes the photo-induced separation of electron–hole pairs, and the porous structure built on steric units offers ample space for catalytic reactions. This work could provide case references for structural design and the structure–effect relationship of efficient polymer photocatalysts. Full article

In the field of perovskite optoelectronics, developing hole-transporting materials (HTMs) on the spiro[fluorene-9,9′-xanthene] (SFX) platform is one of the current research focuses. The SFX inherits the merits of spirobifluorene in terms of the configuration and property, but it is more easily derivatized and regulated by virtue of its binary structure. In this work, we design and synthesize four isomeric SFX-based HTMs, namely m-SFX-mF, p-SFX-mF, m-SFX-oF, and p-SFX-oF, through varying the positions of fluorination on the peripheral aniline units and their substitutions on the SFX core, and the optoelectronic performance of the resulting HTMs is evaluated in both perovskite solar cells (PSCs) and light-emitting diodes (PeLEDs) by the vacuum thermal evaporating hole-transporting layers (HTLs). The HTM p-SFX-oF exhibits an improved power conversion efficiency of 15.21% in an inverted PSC using CH₃NH₃PbI₃ as an absorber, benefiting from the deep HOMO level and good HTL/perovskite interface contact. Meanwhile, the HTM m-SFX-mF provides a maximum external quantum efficiency of 3.15% in CsPb(Br/Cl)₃-based PeLEDs, which is attributed to its perched HOMO level and shrunken band-gap for facilitating charge carrier injection and then exciton combination. Through elucidating the synergistic position effect of fluorination on aniline units and their substitutions on the SFX core, this work lays the foundation for developing low-cost and efficient HTMs in the future. Full article

Hybrid organic–inorganic perovskite solar cells (PSCs) are receiving huge attention owing to their marvelous advantages, such as low cost, high efficiency, and superior optoelectronics characteristics. Despite their promising potential, charge-carrier dynamics at the interfaces are still ambiguous, causing carrier recombination and hindering carrier transport, thus lowering the open-circuit voltages (V_oc) of PSCs. To unveil this ambiguous phenomenon, we intensively performed various optoelectronic measurements to investigate the impact of interfacial charge-carrier dynamics of PSCs under various light intensities. This is because the charge density can exhibit different mobility and charge transport properties depending on the characteristics of the charge transport layers. We explored the influence of the hole transport layer (HTL) by investigating charge transport properties using photoluminescence (PL) and time-resolved (TRPL) to unveil interfacial recombination phenomena and optoelectronic characteristics. We specifically investigated the impact of various thicknesses of HTLs, such as 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (spiro-OMeTAD), and poly(triaryl)amine (PTAA), on FA_0.83MA_0.17Pb(Br_0.05I_0.95)₃ perovskite films. The HTLs are coated on perovskite film by altering the HTL’s concentration and using F4-TCNQ and 4-tert-butylpyridine (tBP) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSi) as dopants both for spiro-OMeTAD and PTAA. These HTLs diversified the charge concentration gradients in the absorption layer, thus leading to different recombination rates based on the employed laser intensities. At the same time, the generated charge carriers are rapidly transferred to the interface of the HTL/absorption layer and accumulate holes at the interface because of inefficient capacitance and mobility differences caused by differently doped HTL thicknesses. Notably, the charge concentration gradient is low at lower light intensities and did not accumulate holes at the HTL/absorption layer interface, even though they have high charge mobility. Therefore, this study highlights the importance of interfacial charge recombination and charge transport phenomena to achieve highly efficient and stable PSCs. Full article

Organic amines are important compounds present in a wide variety of products, which makes the development of new systems for their detection an interesting field of study. New organometallic complexes of group 9 [MCp*X(2′-R-2-py-SBF)] (M = Ir, Rh; R = H, X = Cl (6), R = H, X = OAc (7), R = CHO, X = Cl (8)), and [IrCp*Cl(2′, 7-diCHO-2-py-SBF)] (9) (Cp* pentamethylcyclopentadienyl, SBF = 9,9’-spirobifluorene) bearing bidentate C–N ligands based on 9,9′-spirobifluorene were obtained and characterized by NMR spectroscopy, mass spectrometry, IR spectroscopy, and X-ray diffraction analysis when possible. The formation of a Schiff base to give complexes with the formula [MCp*Cl(2′-CH=NR-2-py-SBF)] (M = Ir, Rh; R = alkyl or aryl (10–12)), through condensation of an amine, and the aldehyde group present in these new complexes was studied leading to a selective reactivity depending on the nature of the amine and the metal center. While the iridium complexes only react with aromatic amines, the rhodium derivative requires heat for those but can react at room temperature with aliphatic amines. Full article

Perovskite Solar Cells (PSCs) have attracted attention due to their low cost, easy solution processability, high efficiency, and scalability. However, the benchmark expensive hole transport material (HTM) 2,2′,7,7′-tetrakis[N, N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (Spiro-MeOTAD), which is traditionally solution-processed with toxic solvents such as chlorobenzene (CB), dichlorobenzene (DCB), or toluene, is a bottleneck. To address this issue, this work investigates the implementation of Zn(II), Cu(II), or Co(II) tetra-tert-butylphthalocyanines (TBU4-Cu, TBU4-Zn, TBU4-Co), established macrocyclic derivatives whose synthesis and processing inside the devices have been redesigned to be more environmentally sustainable and cost-effective by substituting conventional solvents with greener alternatives such as anisole, propane-1,2-diol, and their mixture, as dopant-free HTMs in planar n-i-p PSCs. The anisole-processed HTMs provided power conversion efficiencies (PCE) up to 12.27% for TBU4-Cu and 11.73% for TBU4-Zn, with better photovoltaic parameters than the corresponding cells made with chlorobenzene for which the best results obtained were, respectively, 12.22% and 10.81%. Full article

The most widely used material as a hole-transport layer (HTL) for effective normal perovskite solar cells (PSCs) is still 2,2′,7,7′-Tetrakis[N, N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (Spiro-OMeTAD), which requires heavy doping with the hydroscopic Lithium bis(trifluoromethanesulfonyl)imide (Li-ΤFSI). However, the long-term stability and performance of PCSs are frequently hampered by the residual insoluble dopants in the HTL, Li⁺ diffusion throughout the device, dopant by-products, and the hygroscopic nature of Li-TFSI. Due to the high cost of Spiro-OMeTAD, alternative efficient low-cost HTLs, such as octakis(4-methoxyphenyl)spiro[fluorene-9,9′-xanthene]-2,2′,7,7′-tetraamine) (X60), have attracted attention. However, they require doping with Li-TFSI, and the devices develop the same Li-TFSI-derived problems. Here, we propose Li-free 1-Ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMIM-TFSI) as an efficient p-type dopant of X60, resulting in a high-quality HTL with enhanced conductivity and deeper energy levels The optimized X60:EMIM-TFSI-enabled devices exhibit a higher efficiency of 21.85% and improved stability, compared to the Li-TFSI-doped X60 devices. The stability of the optimized EMIM-TFSI-doped PSCs is greatly improved, and after 1200 hr of storage under ambient conditions, the resulting PSCs maintain 85% of the initial PCE. These findings offer a fresh method for doping the cost effective X60 as the HTL with a Li-free alternative dopant for efficient, cheaper, and reliable planar PSCs. Full article

A perovskite photo-sensor is promising for a lightweight, thin, flexible, easy-to-coat fabrication process, and a higher incident photon-to-current conversion efficiency. We have investigated perovskite photo-sensors with a solution-processed compact TiO₂ under a low-temperature process and an ultra-thin polyethylenimine ethoxylated (PEIE) as an electron injection layer. The TiO₂ film is grown from an aqueous solution of titanium tetrachloride (TiCl₄) at 70 °C by a chemical bath deposition method. For an alternative process, the ultra-thin PEIE is spin coated on the TiO₂ film. Then, the perovskite layer is deposited on the substrate by the one- or two-step methods in the glovebox. Next, a hole transport layer of 2,2,7,7-tetrakis(N,N-di-p-methoxyphenylamine)-9, 9-spiro-bifluorene (Spiro-OMeTAD) solution is spin coated. The fabricated device structure is a photodiode structure of FTO/TiO₂/(without or with) PEIE/(one- or two-step) perovskite layer/Spiro-OMeTAD/Au. For the sensing characteristics, a ratio of photo-to-dark-current density was 2.88 × 10⁴ for the device with PEIE layer. In addition, a power-law relationship is discussed. Full article

We report on the synthesis of a novel class of functionalized thia[6]helicenes and a thia[5]helicene, containing a benzothiophene unit and a second heteroatom embedded in the helix (i.e., nitrogen and oxygen) or a pyrene or a spirobifluorene moiety. These systems are obtained through straightforward and general procedures that involve: (i) palladium-catalyzed annulation of iodo-atropoisomers with internal alkynes and (ii) Suzuki coupling of iodo-atropoisomers with phenyl boronic acid followed by a Mallory-type reaction. Both experimental and theoretical studies on the configurational stability of some selected thia[6]helicenes confirmed their stability toward racemization at room temperature, while the pyrene-based thia[5]helicene was found to be unstable. Moreover, the configuration assignment for one representative thiahelicene was established through the comparison between experimental and theoretical circular dichroism (CD) spectra. A systematic study of the photophysical properties of both thiahelicenes and the corresponding atropoisomers has been carried out to provide a complete overview on the new molecules proposed in this work. The obtained data showed regular trends in all the thiahelicene series with spectroscopic traits in line with those previously observed for similar heterohelicenes. Full article

High-efficiency and stable hole transport materials (HTMs) play an essential role in high-performance planar perovskite solar cells (PSCs). 2,2,7,7-tetrakis(N,N-di-p-methoxyphenylamine)-9,9-spirobi-fluorene (Spiro-OMeTAD) is often used as HTMs in perovskite solar cells because of its excellent characteristics, such as energy level matching with perovskite, good film-forming ability, and high solubility. However, the accumulation and hydrolysis of the common additive Li-TFSI in Spiro-OMeTAD can cause voids/pinholes in the hole transport layer (HTL), which reduces the efficiency of the PSCs. In order to improve the functional characteristics of HTMs, in this work, we first used CsI as a dopant to modify the HTL and reduce the voids in the HTL. A small amount of CsI is introduced into Spiro-OMeTAD together with Li-TFSI and 4-tert-butylpyridine (TBP). It is found that CsI and TBP formed a complex, which prevented the rapid evaporation of TBP and eliminated some cracks in Spiro-OMeTAD. Moreover, the uniformly dispersed TBP inhibits the agglomeration of Li-TFSI in Spiro-OMeTAD, so that the effective oxidation reaction between Spiro-OMeTAD and air produces Spiro-OMeTAD⁺ in the oxidation state, thereby increasing the conductivity and adjusting the HTL energy. Correspondingly, the PCE of the planar PSC of the CsI-modified Spiro-OMeTAD is up to 13.31%. In contrast, the PSC without CsI modification showed a poor PCE of 10.01%. More importantly, the PSC of Spiro-OMeTAD treated with CsI has negligible hysteresis and excellent long-term stability. Our work provides a low-cost, simple, and effective method for improving the performance of hole transport materials and perovskite solar cells. Full article

Perovskite solar cells (PSCs) based on the 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spirobifluorene (spiro-OMeTAD) hole transport layer have exhibited leading device performance. However, the instability caused by this organic function layer is a very important limiting factor to the further development of PSCs. In this work, the spiro-OMeTAD is doped with polymethyl methacrylate (PMMA), which is further used as the hole transport layer to improve the device stability. It is shown that the PMMA can effectively improve the moisture and oxygen resistance of spiro-OMeTAD, which leads to improved device stability by separating the perovskite layer from moisture and oxygen. The device efficiency can maintain 77% of the original value for PSCs with the PMMA-doped spiro-OMeTAD hole transport layer, under a natural air environment (RH = 40%) for more than 80 days. The results show that the moisture- and oxygen-resistant PMMA:spiro-OMeTAD hole transport layer is effective at improving the device performance. Full article

A spirogermabifluorene that bears sterically demanding 3,3′,5,5′-tetra(t-butyl)-2,2′-biphenylene groups (1) was obtained from the reaction of in-situ-generated 2,2′-dilithiobiphenylene with GeCl₂·(dioxane). The solid-state structure and the redox behavior of 1 were examined by single-crystal X-ray diffraction analysis and electrochemical measurements, respectively. The sterically hindered biphenyl ligands endow 1 with high redox stability and increased electron affinity. The experimental observations were corroborated by theoretical DFT calculations. Full article