Search Results (498)

In this study, a series of copolymers was synthesized using the promising biodegradable polymers Poly(L-lactic acid) (PLLA), Poly(lactic-co-glycolic acid) (PLGA), and Poly(ethylene adipate) (PEAd), known for their high potential. PEAd was synthesized through a two-step melt polycondensation process and then used to prepare copolymers with PLLA (PLLA-co-PEAd) and PLGA (PLGA-co-PEAd) at weight ratios of 90/10 and 75/25, respectively. The synthesized materials, along with the starting polymers, were extensively characterized for their structure, molecular weight, crystallinity, and thermal behavior. These novel systems exhibit single thermal transitions, e.g., glass transition. The incorporation of PEAd into the copolymers induced a plasticizing effect, evidenced by a consistent decrease in the glass transition temperature. Due to the latter effect in combination with the M_w drop, the facilitation of crystal nucleation was observed. Finally, the results by dielectric spectroscopy on the local and segmental molecular mobility provided additional proof for the homogeneity of the systems, as manifested, e.g., by the recording of single segmental relaxation processes. Overall, the findings indicate that the PLLA-co-PEAd and PLGA-co-PEAd copolymers hold significant potential, and the use of complementary experimental techniques offers valuable insights and indirect indications of their properties. Full article

Electrospun nanofibrous membranes have gained considerable attention in bone tissue engineering due to their ability to mimic the extracellular matrix and provide a suitable environment for cell attachment and proliferation. This study investigates the fabrication, characterization, and biocompatibility of poly(L-lactic acid) (PLA)-based membranes enhanced with periclase (MgO) and gold nanoparticles (AuNPs). The membranes were fabricated using an optimized electrospinning process and subsequently characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FT-IR), and contact angle measurements. Additionally, in vitro biodegradation studies in simulated body fluid (SBF) and cytocompatibility tests with osteoblast-like cells were conducted. The results demonstrated that the incorporation of MgO and AuNPs significantly influenced the structural and chemical properties of the membranes, improving their wettability and bioactivity. SEM imaging confirmed uniform fiber morphology with well-distributed nanoparticles. FT-IR spectroscopy indicated successful integration of bioactive components into the PLA matrix. Cytocompatibility assays showed that modified membranes promoted higher osteoblast adhesion and proliferation compared to pristine PLA membranes. Furthermore, biodegradation studies revealed a controlled degradation rate suitable for guided bone regeneration applications. These findings suggest that electrospun PLA membranes enriched with MgO and AuNPs present a promising biomaterial for GBR applications, offering improved bioactivity, mechanical stability, and biocompatibility. Full article

Bone-related defects present a key challenge in orthopaedics. The current gold standard, autografts, poses significant limitations, such as donor site morbidity, limited supply, and poor morphological adaptability. This study investigates the potential of scaffold geometry to induce osteogenic differentiation of human adipose-derived stem cells (hADSCs) through mechanotransduction, without the use of chemical inducers. Four distinct poly-(L)-lactic acid (PLA) scaffold architectures—Traditional Cross (Tc), Triangle (T), Diamond (D), and Gyroid (G)—were fabricated using fused filament fabrication (FFF) 3D printing. hADSCs were cultured on these scaffolds, and their response was evaluated utilising an alkaline phosphatase (ALP) assay, immunofluorescence, and extensive proteomic analyses. The results showed the D scaffold to have the highest ALP activity, followed by Tc. Proteomics results showed that more than 1200 proteins were identified in each scaffold with unique proteins expressed in each scaffold, respectively Tc—204, T—194, D—244, and G—216. Bioinformatics analysis revealed structures with complex curvature to have an increased expression of proteins involved in mid- to late-stage osteogenesis signalling and differentiation pathways, while the Tc scaffold induced an increased expression of signalling and differentiation pathways pertaining to angiogenesis and early osteogenesis. Full article

This study proposes a continuous preparation strategy for poly (l-lactic acid) (PLLA) scaffolds with oriented hierarchical microporous structures for bone repair. A PLLA-oriented multi-stage microporous bone repair scaffold (hereafter referred to as the oriented multi-stage microporous scaffold) was designed using a novel extrusion foaming technology that integrates fused deposition modeling (FDM) 3D printing with supercritical carbon dioxide (SC-CO₂) microcellular foaming technology. The influence of the 3D-printed structure on the microcellular morphology of the oriented multi-stage microporous scaffold was investigated and optimized. The combination of FDM and SC-CO₂ foaming technology enables a continuous extrusion foaming process for preparing oriented multi-stage microporous scaffolds. The mechanical strength of the scaffold reached 15.27 MPa, meeting the requirements for bone repair in a low-load environment. Notably, the formation of open pores on the surface of the oriented multi-stage microporous scaffold positively affected cell proliferation, differentiation, and activity, as well as the expression of anti-inflammatory and pro-inflammatory factors. In vitro cell experiments (such as CCK-8) showed that the cell proliferation rate in the oriented multi-stage microporous scaffold reached 100–300% after many days of cultivation. This work provides a strategy for the design and manufacture of PLLA scaffolds with hierarchical microcellular structures and biocompatibility for bone repair. Full article

Biodegradable polymer composites offer promising alternatives to petroleum-based plastics, supporting the principles of a zero waste and circular economy. This study investigates the reinforcing potential of alkali-treated wood flour derived from recycled pine (Pinus brutia Ten.) and poplar (Populus alba L.) waste wooden pallets in poly(lactic acid) (PLA) biocomposites. Wood flour was initially recovered through grinding and screening during recycling, followed by alkali treatment via a green chemistry approach to enhance interfacial bonding with the PLA matrix. The impact of alkali concentration and two fabrication methods—additive manufacturing (AM) and injection molding (IM)—on the properties of developed biocomposite materials was assessed through mechanical, physical, morphological, and thermal analyses. IM samples outperformed AM counterparts, with the IM PLA containing 30 wt% wood flour (alkali-treated with 10% solution) showing the highest mechanical gains: tensile (+71.35%), flexural (+64.74%), and hardness (+2.62%) compared to untreated samples. Moreover, the AM sample with 10 wt% wood flour and 10% alkali treatment showed a 49.37% decrease in water absorption compared to the untreated sample, indicating improved hydrophobicity. Scanning electron microscopy confirmed that alkali treatment reduced void content and enhanced morphological uniformity, while thermal properties remained consistent across fabrication methods. This work introduces a green composite using non-toxic materials and treatments, facilitating eco-friendly production aligned with zero waste and circular economy principles throughout the manufacturing lifecycle. Full article

Background/Objectives: Personalized 3D-printed (3DP) metallic implants delivery systems are being explored to repair bone fractures, allowing the customization of medical implants that respond to individual patient needs, making it potentially more effective and of greater quality than mass-produced devices. However, challenges associated with postsurgical infections caused by bacterial adhesion remain a clinical issue. To address this, local antibiotic therapies are receiving extensive attention to minimize the risk of implant-related infections. This study investigated the use of amikacin (AMK), a broad-spectrum aminoglycoside antibiotic, incorporated onto 3D-printed 316L stainless steel implants using biodegradable polymer coatings of chitosan and poly lactic-co-glycolic acid (PLGA). Methods: This research examined different approaches to coat 3DP implants with amikacin. Various polymer-based coatings were studied to determine the optimal formulation based on the characteristics and release profile. The optimal formulation was performed on the antibacterial activity studies. Results: AMK-chitosan with PLGA coating implants controlled the rate of drug release for up to one month. The 3DP drug-loaded substrates demonstrated effective, concentration-dependent antibacterial activity against common infective pathogens. AMK-loaded substrates showed antimicrobial effectiveness for one week and inhibited bacteria significantly compared to the uncoated controls. Conclusions: This study demonstrated that 3DP metal surfaces coated with amikacin can provide customizable drug release profiles while effectively inhibiting bacterial growth. These findings highlight the potential of combining 3D printing with localized delivery strategies to prevent implant-associated infections and advance the development of personalized therapies. Full article

Background/Objectives: Although the nanocomposite of poly(L-lactic acid) with graphene oxide (PLLA-GO) shows promise for tissue engineering, its specific bioactive interactions with diverse cell lineages during early tissue regeneration remain unclear. This study comprehensively investigated the in vitro multifaceted biocompatibility of PLLA-GO using human fibroblasts (FN1 cells), murine mesenchymal stem cells (mBMSCs), and human umbilical vein endothelial cells (HUVECs). Methods: Morphological analyses were performed using optical and scanning electron microscopy, while proliferation dynamics were assessed via CFSE staining. Cell cycle progression was evaluated using flow cytometry, mitochondrial activity was examined through TMRE staining, and inflammatory cytokine profiling was performed via Cytometric Bead Array (CBA). Results: PLLA-GO exhibited primary biocompatibility across all evaluated cell lines, characterized by efficient adhesion and proliferation. However, significant cell-type-dependent modulations were observed. The FN1 cells exhibited proliferative adaptation but induced accelerated scaffold degradation, as evidenced by a substantial increase in cellular debris (5.93% control vs. 34.38% PLLA-GO; p = 0.03). mBMSCs showed a transient initial proliferative response and a significant 21.66% increase in TNF-α production (179.67 pg/mL vs. 147.68 pg/mL in control; p = 0.03). HUVECs demonstrated heightened mitochondrial sensitivity, exhibiting a 32.19% reduction in mitochondrial electrical potential (97.07% control vs. 65.82% PLLA-GO; p ≤ 0.05), alongside reductions in pro-inflammatory cytokines TNF-α (8.73%) and IL-6 (12.47%). Conclusions: The PLLA-GO processing method is crucial for its properties and subsequent cellular interactions. Therefore, rigorous and specific preclinical evaluations—considering both cellular contexts and fabrication—are indispensable to ensure the safety and therapeutic potential of PLLA-GO in tissue engineering and regenerative medicine. Full article

Poly-L-lactic acid (PLLA) filler, which increases volume and collagen synthesis, is used for skin rejuvenation. Subcutaneous adipose tissue (SAT) contains precursors that differentiate into mature adipocytes that secrete adiponectin, which modulates SAT function and increases adipogenesis. During aging, adiponectin and precursor cell functions decrease, reducing adipogenesis and facial volume. Adiponectin also increases collagen synthesis by stimulating fibroblasts. After hydrogen peroxide treatment to induce senescent adipocytes (3T3-L1) and aged skin, follow-up PLLA treatment increased adipogenesis by stimulating the nuclear factor erythroid-2-related factor 2 (NRF2)/peroxisome proliferator-activated receptor gamma (PPARγ)/CCAAT/enhancer binding protein alpha (C/EBPα) pathway. This resulted in increased adiponectin secretion, which promoted collagen synthesis and mitigated the loss of SAT volume. In the senescent adipocyte, PLLA increased NRF2/PPARγ/C/EBPα, adipogenesis factors (fatty acid binding protein 4, lipoprotein lipase, and cluster of differentiation 36), lipogenesis factors (ATP citrate lyase, acetyl-CoA carboxylase, and fatty acid synthase), adiponectin, and lipid droplet size. Treatment of senescent fibroblasts with conditioned medium from PLLA-treated adipocytes increased collagen1 and 3 and decreased matrix metalloproteinase1 and 3 expressions. Similarly, PLLA increased NRF2/PPARγ/C/EBPα, adipogenesis, and lipogenesis factors in aged mouse SAT. Also, PLLA increased adiponectin and adipocyte numbers without hypertrophy and increased collagen accumulation and dermal thickness. In summary, PLLA increased adipogenesis and adiponectin, which increased the volume of SAT and collagen synthesis, thereby rejuvenating aged skin. Full article

Objective: This study aimed to evaluate the reconstitution and solubility characteristics of two injectable poly L-lactic acid (PLLA) formulations, the next-generation injectable PLLA-LASYNPRO™ and a previous-generation PLLA (PLLA-SCA), through in vitro analysis. Methods: The study, conducted from 20 November to 11 December 2024, involved reconstituting PLLA-LASYNPRO™ in 5 mL saline solution and PLLA-SCA in 8 mL sterile water or saline (as specified in the instructions for use). Reconstitution processes were recorded using a 4K camera, and microscopic and sieve-based analyses were performed at various time points (1–120 min). The study used standardized methods for reconstitution, observation, and sample collection, including a light microscope and micrometric sieves. Results: PLLA-LASYNPRO™ exhibited rapid, uniform reconstitution, resulting in a homogeneous milky-white solution with no foam formation. In contrast, PLLA-SCA showed a two-phase mixture with foam formation, requiring more vigorous shaking. Over time, PLLA-LASYNPRO™ displayed gradual sedimentation, with no foam, while PLLA-SCA showed a progressive increase in foam volume and sedimentation. Microscopic analysis revealed consistent particle morphology, with PLLA-LASYNPRO™ particles being smaller and homogeneous, and PLLA-SCA exhibiting larger, irregular particles prone to aggregation. Sieve analysis showed that PLLA-LASYNPRO™ produced minimal sediment, whereas PLLA-SCA consistently produced sediment on both 71 µm and 200 µm sieves. Conclusions: PLLA-LASYNPRO™ and PLLA-SCA display distinct reconstitution behaviors, with PLLA-LASYNPRO™ showing more consistent characteristics and fewer issues with foam and sedimentation. These differences may impact clinical applications and require consideration in treatment planning. Full article

Biopolymer-based dermal fillers have gained attention in facial aesthetics due to their biocompatibility, gel-forming properties, and capacity to stimulate tissue regeneration. However, evidence regarding their clinical performance remains scattered and inconsistent. This systematic review evaluates the current scientific literature on the effectiveness and safety of injectable biopolymers used in facial aesthetic procedures. A systematic search was conducted in PubMed, MEDLINE, and Embase databases for studies published between 2016 and 2024. Only human studies in English assessing clinical efficacy, safety, adverse events, and patient satisfaction were included. Of the 280 articles initially identified, 9 met the inclusion criteria. The selected studies showed improvements in facial volume and wrinkle reduction with gel-based biopolymers such as poly-L-lactic acid (PLLA), polycaprolactone (PCL), and polymethylmethacrylate (PMMA). Most studies reported high patient satisfaction and a low incidence of serious adverse effects. However, methodological heterogeneity and limited long-term data reduced the strength of the evidence. While injectable biopolymers appear to be effective and generally safe, current evidence is limited and variable. Further multicenter randomized trials with standardized protocols and longer follow-up periods are needed. Clinicians should apply these materials with caution, ensuring individualized treatment planning and careful risk assessment. Full article

Biobased packaging solutions with active functions for different food categories are a very attractive topic nowadays. This packaging provides suitable preservation of the food quality and extends the shelf life of packed items. In addition, this is a promising pathway to overcome global pollution, to protect human health, as well as to provide a better planetary wellbeing. In this work, a packaging composition based on poly(lactic acid) (PLA) with the addition of Curcuma longa L. (C) extract prepared by the solution casting method is promoted as a potential packaging option for the active food packaging of cheese. The dopant levels of the extract were performed at 0.5%, 1%, 2%, 5%, and 10%, while the neat PLA film was used as a control. The obtained results are promising. By a thermal analysis, it is shown that C-extract has a plasticizing and nucleating effect on PLA molecules, as well as improving the barrier and other film properties. Moreover, this packaging was proven as a potential antimicrobial packaging for white cheese—it enables extending the shelf life by direct contact. This is a simple way of manufacturing biobased packaging doped with natural antimicrobials that could be used for other food categories that are prone to microbiological attack. Full article

Personal protection from mosquitos is dominated by topically applied aerosol sprays or lotions, which demonstrate efficacy durations of no longer than 10 h, thus encouraging the research and development of long-term insect-repelling devices. Repellent-loaded polymeric matrices have driven the development of insect-repelling apparel fabrics; however, most efforts either fail to offer the tensile properties demanded from apparel applications or only demonstrate repellency durations for multiple days. This study utilizes poly-D,L-lactic acid (PDLLA) as a compatibilizer between Nylon 12 and nootkatone for enhanced nootkatone retention throughout fabric manufacturing processes. Nootkatone-infused Nylon 12/PDLLA composites demonstrate up to a 14% increase in nootkatone retention throughout fabric manufacturing compared to pure Nylon 12, underscoring the importance of polymer/substrate miscibility on substrate retention. Moreover, while nootkatone-infused Nylon 12 filaments demonstrate decreasing tensile stress at breaks with increasing nootkatone content, Nylon 12/PDLLA filaments exhibit similar tensile properties regardless of nootkatone content. The PDLLA domains are suspected to behave as reservoirs for excess nootkatone to prevent its role as a defect within the Nylon 12 matrix. The resulting knits exhibit significant mosquito repellencies over 24 h dependent on the nootkatone concentration, thus demonstrating potential to embed insect repellent within high-performance polymeric filaments with effective mosquito repellencies. Therefore, the incorporation of PDLLA as a compatibilizer holds significant potential for enhanced nootkatone retention during Nylon 12 fabric manufacturing. Full article

We report the synthesis of highly enantiopure perdeuterated poly-L-lactic acid and poly-D-lactic acid polymers with well-defined molecular weight by polymerization of perdeuterated lactides. Enantiopure D- and L-lactic acid-d₄ monomers were synthesized from sodium pyruvate-d₃ using D- and L-lactate dehydrogenase enzymes (D-LDH and L-LDH) as biocatalysts. The reduced form of the co-enzyme nicotinamide adenine dinucleotide-d₁ (NADH-d₁) was generated in situ from the oxidized form nicotinamide adenine dinucleotide (NAD⁺) by formate dehydrogenase (FDH)-catalyzed oxidation of sodium formate-d₁ to carbon dioxide with concerted reduction of NAD⁺ to NADH-d₁. For the conversion of the perdeuterated lactic acid monomers to the corresponding lactide dimers, we developed a process for generating these compounds in the high purity needed for the final anionic ring-opening polymerization step. This method enabled the generation of a range of perdeuterated polylactic acid polymers that are highly suitable for the characterization of polymer structure and dynamics using neutron scattering, infrared and nuclear magnetic resonance spectroscopy methods that are sensitive to deuterium. Furthermore, these deuterium-labeled polymers are well-suited to the study of the biodegradation of PLA-based plastics. Full article

The valorization of by-products in the olive sector has increasingly become the focus of business and research in the context of biorefineries. This work evaluates the recovery of bioactive compounds from olive leaves and their subsequent incorporation into poly(L-lactic- acid-co-caprolactone) (PLCL) filaments through supercritical impregnation. Obtaining an olive leaf extract (OLE) using enhanced solvent extraction at a high pressure (ESE with CO₂/ethanol 1:1 v/v) resulted in higher yields and concentrations of bioactives with high antioxidant and anti-inflammatory activity. No significant differences were found between the extracts obtained with different water regimes (irrigated and dry land). The supercritical impregnation of PLCL filaments showed that a low depressurization rate is essential to avoid material deformation, while the impregnation pressure and temperature influenced the OLE loading and antioxidant activity of the filaments. In vitro release studies showed the prolonged release of active compounds over 90 days, and the kinetics best fit the Korsmeyer–Peppas model, suggesting a diffusion mechanism. These results validate supercritical impregnation as a promising strategy for the development of OLE-active PLCL filaments with potential for biomedical applications requiring sustained therapeutic release. Full article

Developing biocompatible and biodegradable materials for food packaging is crucial for addressing environmental concerns and ensuring food safety. In this study, we present a novel food packaging film composed of poly(lactic acid) (PLA) and biogenic vaterite CaCO₃-Ag hybrid microspheres. A non-solution technique was employed to prepare these films, ensuring the sustainability and simplicity of the production process. X-ray diffraction and infrared spectroscopy analyses confirmed the stability and compatibility of the vaterite CaCO₃-Ag microspheres within the PLA matrix. Cytotoxicity tests using human dermal fibroblast cells demonstrated complete biocompatibility of the films, even at high concentrations. Antimicrobial efficacy was assessed through minimum inhibitory concentration (MIC) testing, which demonstrated that PLA film containing 7 wt% vaterite CaCO₃-Ag hybrids effectively inhibited both gram-positive and gram-negative bacteria at concentrations as low as ≤0.067 g/mL. Mechanical testing showed that the modulus and strength of PLA film increased significantly with the embedding of 5 wt% of vaterite CaCO₃-Ag hybrid, reaching a maximum of 5.63 ± 1.51 GPa and 48.07 ± 13.81 MPa, respectively. Thermal analysis indicated improved thermal stability with the addition of the microspheres. Synchrotron X-ray absorption spectroscopy confirmed the stability of the vaterite structure and the presence of both Ag⁰ and Ag⁺ species after embedding in PLA matrix. The composite films exhibited improved oxygen and water vapor barrier properties, making them suitable for packaging applications. These findings highlight the potential of PLA-vaterite CaCO₃-Ag hybrid films as sustainable and effective food packaging materials. Full article