Search Results (1,922)

While Forgetting Factor Recursive Least Square (FFRLS) algorithms with evaluation mechanisms have been developed to address SOC-dependent parameter mapping shifts and their efficacy has been proven in Li-ion batteries, their applicability to lithium–sulfur (Li-S) batteries remains uncertain due to different electrochemical characteristics. This study critically evaluates the applicability of a Fisher information matrix-constrained FFRLS framework for online parameter identification in Li-S battery equivalent circuit network (ECN) models. Experimental validation using distinct drive cycles showed that the identification results of polarization-related parameters are significantly biased between different current excitations, and root mean square error (RMSE) variations diverge by 100%, with terminal voltage estimation errors more than 0.05 V. The parametric uncertainty under variable excitation profiles and voltage plateau estimation deficiencies confirms the inadequacy of such approaches, constraining model-based online identification viability for Li-S automotive applications. Future research should therefore prioritize hybrid estimation architectures integrating electrochemical knowledge with data-driven observers, alongside excitation capturing specifically optimized for Li-S online parameter observability requirements and cell nonuniformity and aging condition consideration. Full article

Aquaporins (AQPs) are membrane proteins that facilitate the transport of water and solutes. Among AQPs, plasma membrane intrinsic proteins (PIPs) play a critical role in maintaining water balance between the internal and external cell environments. This study focuses on the tomato due to its economic importance and cultivation under moderate salinity conditions in Japan. A swelling assay using X. laevis oocyte confirmed that all five examined tomato SlPIP2 isoforms showed water transport activity. Among them, two-electrode voltage clamp (TEVC) experiments showed that only SlPIP2;1, SlPIP2;4, and SlPIP2;8 transport Na⁺ and K⁺, with no transport activity for Cs⁺, Rb⁺, Li⁺, or Cl⁻. CaCl₂ (1.8 mM) reduced ionic currents by approximately 45% compared to 30 µM free-Ca²⁺. These isoforms function as very low-affinity Na⁺ and K⁺ transporters. Expression analysis showed that SlPIP2;4 and SlPIP2;8 had low, stable expression, while SlPIP2;1 was strongly upregulated in roots NaCl treatment (200 mM, 17days), suggesting distinct physiological roles for these ion-conducting AQPs (icAQPs). These data hypothesized that tomato icAQPs play a critical role in ion homeostasis, particularly under salinity stress. In conclusion, the first icAQPs have been identified in the dicotyledonous crop. These icAQPs are essential for plant resilience under salt stress. Full article

In recent years, the bidirectional regulatory mechanism of the bone-brain axis has become a hotspot for interdisciplinary research. In this paper, we systematically review the anatomical and functional links between bone and the central nervous system, focusing on the regulation of brain function by bone-derived signals and their clinical translational potential. At the anatomical level, the blood–brain barrier permeability mechanism and the unique structure of the periventricular organs establish the anatomical basis for bone-brain information transmission. Innovative discoveries indicate that the bone cell network (bone marrow mesenchymal stem cells, osteoblasts, osteoclasts, and bone marrow monocytes) directly regulates neuroplasticity and the inflammatory microenvironment through the secretion of factors such as osteocalcin, lipid transporter protein 2, nuclear factor κB receptor-activating factor ligand, and fibroblast growth factor 23, as well as exosome-mediated remote signaling. Clinical studies have revealed a bidirectional vicious cycle between osteoporosis and Alzheimer’s disease: reduced bone density exacerbates Alzheimer’s disease pathology through pathways such as PDGF-BB, while AD-related neurodegeneration further accelerates bone loss. The breakthrough lies in the discovery that anti-osteoporotic drugs, such as bisphosphonates, improve cognitive function. In contrast, neuroactive drugs modulate bone metabolism, providing new strategies for the treatment of comorbid conditions. Additionally, whole-body vibration therapy shows potential for non-pharmacological interventions by modulating bone-brain interactions through the mechano-osteoclast signaling axis. In the future, it will be essential to integrate multiple groups of biomarkers to develop early diagnostic tools that promote precise prevention and treatment of bone-brain comorbidities. This article provides a new perspective on the mechanisms and therapeutic strategies of neuroskeletal comorbidities. Full article

Commercialization of lithium-sulfur (Li-S) batteries is critically hampered by the severe lithium polysulfide shuttle effect. Hence, designing multifunctional materials that synergistically provide physical confinement of polysulfides, chemical entrapment, and catalytic promotion is a viable route for improving Li-S battery performance. Herein, graphitic carbon nitride (g-C₃N₄) with abundant nitrogen atoms was used as the chemical adsorption material to realize a “physical-chemical” dual confinement for polysulfides. Furthermore, the integration of CNTs with g-C₃N₄ is intended to substantially enhance the conductivity of the cathode material. Consequently, the synthesized g-C₃N₄/CNT composite, which functions as an effective polysulfide immobilizer, significantly improved the cycling stability and discharge capacity of Li-S batteries. This enhancement can be attributed to its potent adsorption and catalytic activities. Li-S cells utilizing g-C₃N₄/CNT cathodes exhibit exceptional discharge capacity and notable rate capability. Specifically, after 100 cycles at 0.2 C, the discharge capacity was 701 mAh g⁻¹. Furthermore, even at a high rate of 2 C, a substantial capacity of 457 mAh g⁻¹ was retained. Full article

Beryl is classified as a cyclosilicate mineral, and its color is primarily determined by the type and oxidation state of trace elements. In this study, natural yellow-green beryl was used as the research subject, and heat treatment experiments were performed at various temperatures under both oxidizing and reducing atmospheres. A combination of analytical techniques, including electron probe microanalysis (EPMA), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and ultraviolet-visible spectroscopy (UV-Vis), were employed to systematically investigate the composition, structure, and chromogenic mechanisms of beryl before and after heat treatment. The experimental results indicate that heat treatment under both atmospheres can lead to the transformation of yellow-green beryl into blue, with 500–600 °C under a reducing atmosphere identified as the optimal treatment condition. With increasing temperature, beryl gradually dehydrates, resulting in a faded blue color and reduced transparency. Even after treatment at 700 °C, no significant changes in unit cell parameters were observed, and both type I and type II water were retained, indicating that the color change is not attributed to crystal structure transformation or phase transitions. The study reveals that the essential mechanism of color modification through heat treatment lies in the valence change between Fe²⁺ and Fe³⁺ occupying channel and octahedral sites. The observed color variation is attributed to changes in absorption band intensity resulting from charge transfers of O²⁻ → Fe³⁺ and Fe²⁺ → Fe³⁺. This study provides theoretical insights and technical references for the color enhancement of beryl through heat treatment. Full article

Solid oxide electrolysis (SOEL) has emerged as a promising technology for efficient hydrogen production. Its main advantages lie in the high operating temperatures, which enhance thermodynamic efficiency, and in the ability to supply part of the required energy in the form of heat. Nevertheless, improving the long-term durability of stack materials remains a key challenge. Thermal energy can be supplied by dedicated integration with different industrial processes, where the main challenge lies in the elevated stack operating temperature (700–900 °C). This review provides a comprehensive analysis of the integration of solid oxide electrolysis cells (SOECs) into different industrial applications. Main processes cover methanol production, methane production, Power-to-Hydrogen systems, or the use of reversible solid oxide electrolysis cell (rSOEC) stacks that can operate in both electrolysis and fuel cell mode. The potential of co-electrolysis to increase process flexibility and broaden application areas is also analyzed. The aim is to provide a comprehensive analysis of the integration strategies, identify the main technical and economic challenges, and highlight recent developments and future trends in the field. A detailed comparison assessment of the different processes is being discussed in terms of electrical and thermal efficiencies and operating parameters, as well as Key Performance Indicators (KPIs) for each process. Technical-economic challenges that are currently a barrier to their implementation in industry are also analyzed. Full article

Bioinks represent the core of 3D bioprinting, as they are the carrier responsible for enabling the fabrication of anatomically precise, cell-laden constructs that replicate native tissue architecture. Indeed, their role goes beyond structural support, as they must also sustain cellular viability, proliferation, and differentiation functions, which are critical for applications in the field of regenerative medicine and personalized therapies. However, at present, a persistent challenge lies in reconciling the conflicting demands of rheological properties, which are essential for printability and biological functionality. This trade-off limits the clinical translation of bioprinted tissues, particularly for vascularized or mechanically dynamic organs. Despite huge progress during the last decade, challenges persist in standardizing bioink characterization, scaling production, and ensuring long-term biomimetic performance. Based on these challenges, this review explores the inherent trade-off faced by bioink research optimizing rheology to ensure printability, shape fidelity, and structural integrity, while simultaneously maintaining high cell viability, proliferation, and tissue maturation offering insights into designing next-generation bioinks for functional tissue engineering. Full article

Lithium-ion batteries (LIBs) have attracted extensive attention as a distinguished electrochemical energy storage system due to their high energy density and long cycle life. However, the initial irreversible lithium loss during the first cycle caused by the formation of the solid electrolyte interphase (SEI) leads to the prominent reduction in the energy density of LIBs. Notably, lithium formate (HCOOLi, LFM) is regarded as a promising cathode prelithiation reagent for effective lithium supplementation due to its high theoretical capacity of 515 mAh·g⁻¹. Nevertheless, the stable Li-O bond of LFM brings out the high reaction barrier accompanied by the high decomposition potential, which impedes its practical applications. To address this issue, a feasible strategy for reducing the reaction barrier has been proposed, in which the decomposition potential of LFM from 4.84 V to 4.23 V resulted from the synergetic effects of improving the electron/ion transport kinetics and catalysis of transition metal oxides. The addition of LFM to full cells consisting of graphite anodes and LiNi_0.834Co_0.11Mn_0.056O₂ cathodes significantly enhanced the electrochemical performance, increasing the reversible discharge capacity from 156 to 169 mAh·g⁻¹ at 0.1 C (2.65–4.25 V). Remarkably, the capacity retention after 100 cycles improved from 72.8% to 94.7%. Our strategy effectively enables LFM to serve as an efficient prelithiation additive for commercial cathode materials. Full article

Background/Purpose: The only potentially curative procedure for pancreatic cancer is R0 resection, which is difficult to achieve due to poorly defined tumor margins. In the present study, we used an anti-CA19-9 antibody conjugated to a near-infrared fluorophore in orthotopic mouse models to target and visualize pancreatic cancer. Methods: Orthotopic models of the human pancreatic cancer cell lines SW1990 and BxPC3 were established by implanting tumor fragments into the pancreas of athymic nude mice. Anti-CA19-9 and control IgG were conjugated with IRDye800CW. Mice received 50 µg of CA19-9–IRDye800CW or IgG-IRDye800CW via tail-vein injection and were imaged after 72 h. MIA PaCa-2, a CA19-9-negative cell line, was used in subcutaneous models to assess targeting specificity. Results: Using the LI-COR Pearl imaging system in the SW1990 model, the tumor-to-pancreas ratio (TPR) was 4.51 (±0.74), and the tumor to the liver ratio (TLR) was 3.05 (±0.60) with CA19-9-IRDye800CW, while the TPR was 1.67 (±0.16) and the TLR was 0.95 (±0.05) for the non-specific control IgG–IRDye800CW. Using a clinically available fluorescence laparoscope, CA19-9-1RDye800CW demonstrated a TPR of 2.34 (±0.44) and a TLR of 2.23 (±0.49), compared to 1.11 (±0.13) and 0.69 (±0.07), respectively, for IgG-IRDye800CW in the SW1990 orthotopic model. In the BxPC3 models, the TPR was 3.82 (±0.55) and the TLR was 4.13 (±0.77) for CA19-9-IRDye800CW compared to 2.40 (±0.31) and 1.49 (±0.23), respectively, for IgG-IRDye800CW. Conclusions: CA19-9-IRDye800CW provided specific in vivo targeting of two human pancreatic cancer cell lines in orthotopic nude mouse models with superior TPRs and TLRs compared to IgG-IRDye800CW. This tumor-specific fluorescent CA19-9 antibody is a promising clinical tool for improved visualization of pancreatic cancer. Full article

Ischemic heart disease (IHD) represents a leading cause of global morbidity and mortality. Despite significant advances in treatment achieved over recent decades, as well as various therapeutic strategies available to manage IHD progression currently, the global incidence of this disorder remains high. This review examines essential cell biology aspects of adenosine receptors (ARs), along with the effects of known synthetic small-molecule AR ligands, to provide an up-to-date view on the therapeutic potential towards IHD treatment. In particular, we report here advancements made on a selection of AR synthetic ligands that have demonstrated efficacy in pre-clinical or clinical studies, thereby holding promise as new therapeutic candidates in the field of IHD. Although this work adds further evidence that clinically valid small-molecule therapeutic agents targeting ARs exist, their use represents an emerging area, with most drug prototypes still in the pre-clinical developmental stage and many lacking large-scale clinical trials. The future lies in identifying improved AR synthetic ligands with enhanced efficacy and selectivity, as well as reduced adverse side effects, along with establishing a platform of specific and diversified pre-clinical tests, to inform in turn the resulting clinical investigations. Full article

The Caco-2 in vitro model of the intestinal barrier is a well-established system for the investigation of the intestinal fate of orally ingested chemicals and drugs, and it has been used for over ten years by pharmaceutical industries as a model for absorption in preclinical studies. The Caco-2 model shows a fair correlation with in vivo drug absorption, though some inherent biases remain unresolved. Its main limitation lies in the lack of structural complexity, as it does not replicate the diverse cell types and mucus layer present in the human intestinal epithelium. Consequently, the development of advanced in vitro models of the intestinal barrier, that more structurally resemble the human intestinal epithelium physiology, has increased the potential applications of these models. Recently, Caco-2-based advanced intestinal models have proven effective in predicting nanomaterial uptake and transport across the intestinal barrier. The aim of this review is to provide a state-of-the-art of human in vitro intestinal barrier models for the study of translocation/uptake of nanoparticles relevant for oral exposure, including inorganic nanomaterials, micro/nano plastic, and fiber nanomaterials. The main effects of the above-mentioned nanomaterials on the intestinal barrier are also reported. Full article

Landscape metrics are one of the main tools for studying changes in the landscape and the ecological structure of the territory. However, the calculation of some metrics yields significantly different values depending on the configuration of the “Cell neighborhood” (CN) used. This makes the comparison of different analysis results often impossible. In fact, although the metrics are defined in the same way for all software, the choice of a CN with four cells, which includes only the elements on the same row or column, or eight cells, which also includes the cells on the diagonal, changes their value. QGIS’ LecoS plugin uses the value eight while GRASS’ r.li module uses the value four and these values are not modifiable by users. A previous study has shown how the value of the CN used for the calculation of landscape metrics is rarely explicit in scientific publications and its value cannot always be deduced from the indication of the software used. The difference in value for the same metric depends on the CN configuration and on the compactness of the patches, which can be expressed through the Aggregation Index (AI), of the investigated landscape. The scope of this paper is to explore the possibility of deriving an analytical relationship between the Aggregation Index and the variation in the values of some landscape metrics as the CN varies. The numerical experiments carried out in this research demonstrate that it is possible to estimate the differences in landscape metrics evaluated with a four and eight CN configuration using polynomials only for few metrics and only for some intervals of AI values. This analysis combines different Free and Open Source Software (FOSS) systems: GRASS GIS for the creation of test maps and R landscapemetrics package for the calculation of landscape metrics and the successive statistical analysis. Full article

Fungicides are compounds with potentially toxic effects on the human body, but the molecular mechanisms of their action have not yet been explained. The effect of cyprodinil on cell viability, apoptosis level, cell membrane function, cell morphology and expression of antioxidant enzyme genes in the A-375 and DLD-1 cell lines was examined. The cell lines were selected because they can be an excellent in vitro model of neoplastic changes occurring in the skin and large intestine after exposure to a fungicide. The fungicide selected for the study is commonly used in Poland to protect crops against fungi. Our results showed that the tested compound increased cell viability and proliferation, probably activated by mechanisms related to oxidative stress. Cyprodinil caused an increase in glutathione level (in A-375 by about 37% and in DLD-1 by about 28%) and oxidative stress enzymes activity, but not in apoptosis level. Its membrane interactions and its penetration into cells was concentration dependent. It is worth emphasizing that the novelty of our work lies in the use of non-traditional toxicological methods based on molecular analyses using human cell lines. This allowed us to demonstrate not only the toxicity of a single substance but also its behavior within cellular structures. Our findings suggest that cyprodinil may have tumor-promoting properties in skin and colorectal cancer cells. Full article

Microalgae, with their unparalleled capabilities for sunlight-driven growth, CO₂ fixation, and synthesis of diverse high-value compounds, represent sustainable cell factories for a circular bioeconomy. However, industrial deployment has been hindered by biological constraints and the inadequacy of conventional genetic tools. The advent of CRISPR-Cas systems initially provided precise gene editing via targeted DNA cleavage. This review argues that the true transformative potential lies in moving decisively beyond cutting to harness CRISPR as a versatile synthetic biology “Swiss Army Knife”. We synthesize the rapid evolution of CRISPR-derived tools—including transcriptional modulators (CRISPRa/i), epigenome editors, base/prime editors, multiplexed systems, and biosensor-integrated logic gates—and their revolutionary applications in microalgal engineering. These tools enable tunable gene expression, stable epigenetic reprogramming, DSB-free nucleotide-level precision editing, coordinated rewiring of complex metabolic networks, and dynamic, autonomous control in response to environmental cues. We critically evaluate their deployment to enhance photosynthesis, boost lipid/biofuel production, engineer high-value compound pathways (carotenoids, PUFAs, proteins), improve stress resilience, and optimize carbon utilization. Persistent challenges—species-specific tool optimization, delivery efficiency, genetic stability, scalability, and biosafety—are analyzed, alongside emerging solutions and future directions integrating AI, automation, and multi-omics. The strategic integration of this CRISPR toolkit unlocks the potential to engineer robust, high-productivity microalgal cell factories, finally realizing their promise as sustainable platforms for next-generation biomanufacturing. Full article

Background: Previous research has demonstrated that 20 kHz probe or 37 kHz bath sonication of poloxamers comprising polypropylene glycol (PPG) and polyethylene glycol (PEG) blocks can generate degradation byproducts that are toxic to mammalian cells and organisms. Herein, an investigation of a PEGylated phospholipid micelle was undertaken to identify low-molecular-weight sonolytic degradation byproducts that could be cytotoxic. The concern here lies with the fact that sonication is a frequently employed step in drug delivery manufacturing processes, during which PEGylated phospholipids can be subjected to shear forces and other extreme oxidative and thermal conditions. Methods: Control and 20 kHz-sonicated micelles of DSPE-mPEG2000 were analyzed using dynamic light scattering (DLS) and zeta potential analyses to study colloidal properties, matrix-assisted laser desorption/ionization–time of flight (MALDI-TOF) mass spectroscopy (MS) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy to study the structural integrity of DSPE-mPEG2000, and ¹H-NMR spectroscopy and high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection to quantitate the formation of low-molecular-weight degradation byproducts. Results: MALDI-TOF-MS analyses of 20 kHz-sonicated DSPE-mPEG2000 revealed the loss of ethylene glycol moieties in accordance with depolymerization of the PEG chain; ¹H-NMR spectroscopy showed the presence of formate, a known oxidative/thermal degradation product of PEG; and HPLC-UV showed that the generation of formate was dependent on 20 kHz probe sonication time between 5 and 60 min. Conclusions: It was found that 20 kHz sonication can degrade the PEG chain of DSPE-mPEG2000, altering the micelle’s PEG corona and generating formate, a known ocular toxicant. Full article