Search Results (262)

Construction and demolition byproducts include substantial amounts of wood panel waste (WPW) that pose environmental challenges. They also create opportunities for sustainable resource recovery. This study investigates the potential of WPW-derived biochar as an efficient adsorbent for phenol removal from aqueous solutions. Biochar was produced via pyrolysis at 450 °C and subsequent activation at 750, 850, and 950 °C. The biochar’s physicochemical properties, including surface area, pore volume, and elemental composition, were characterized using advanced methods, including BET analysis, elemental analysis, and adsorption isotherm analysis. Activated biochar demonstrated up to nine times higher adsorption capacity than raw biochar, with a maximum of 171.9 mg/g at 950 °C under optimal conditions: pH of 6 at 25 °C, initial phenol concentration of 200 mg/L, and biochar dosage of 1 g/L of solution for 48 h. Kinetic and isotherm studies revealed that phenol adsorption followed a pseudo-second-order model and fit the Langmuir isotherm, indicating chemisorption and monolayer adsorption mechanisms. Leaching tests confirmed the biochar’s environmental safety, with heavy metal concentrations well below regulatory limits. Based on these findings, WPW biochar offers a promising, eco-friendly solution for wastewater treatment in line with circular economy and green chemistry principles. Full article

Moroccan oil shale ash (MOSA) represents an underutilized industrial by-product, particularly in the Rif region, where its high mineral content has often led to its neglect in value-added applications. This study highlights the successful conversion of MOSA into amorphous mesoporous silica (AS-Si) using a sol–gel process assisted by polyethylene glycol (PEG-6000) as a soft template. The resulting AS-Si material was extensively characterized to confirm its potential for environmental remediation. FTIR analysis revealed characteristic vibrational bands corresponding to Si–OH and Si–O–Si bonds, while XRD confirmed its amorphous nature with a broad diffraction peak at 2θ ≈ 22.5°. SEM imaging revealed a highly porous, sponge-like morphology composed of aggregated nanoscale particles, consistent with the nitrogen adsorption–desorption isotherm. The material exhibited a specific surface area of 68 m²/g, a maximum in the pore size distribution at a pore diameter of 2.4 nm, and a cumulative pore volume of 0.11 cm³/g for pores up to 78 nm. DLS analysis indicated an average hydrodynamic diameter of 779 nm with moderate polydispersity (PDI = 0.48), while a zeta potential of –34.10 mV confirmed good colloidal stability. Furthermore, thermogravimetric analysis (TGA) and DSC suggested the thermal stability of our amorphous silica. The adsorption performance of AS-Si was evaluated using methylene blue (MB) and ciprofloxacin (Cipro) as model pollutants. Kinetic data were best fitted by the pseudo-second-order model, while isotherm studies favored the Langmuir model, suggesting monolayer adsorption. AS-Si could be used four times for the removal of MB and Cipro. These results collectively demonstrate that AS-Si is a promising, low-cost, and sustainable adsorbent derived from Moroccan oil shale ash for the effective removal of organic contaminants from aqueous media. Full article

The bond interface is the weakest part of the repair system, and its performance is a key factor impacting the repair effectiveness of damaged concrete constructions. However, the research on the damage law and the mechanism of repair of the bonded interface in the cold region marine environment is not in-depth. In this study, the influence of polyvinyl alcohol (PVA) fibers and crystalline admixtures (CAs) on the mechanical properties and volumetric deformation performance of cementitious repair materials was researched. Furthermore, the deterioration patterns of the bond strength and chloride ion diffusion characteristics of the repair interface under the coupling of seawater-freeze-thaw cycles were investigated. Combined with the composition, micro-morphology, and micro-hardness of hydration products before and after erosion, the damage mechanism of the repaired bonding interface was revealed. The results indicate that the synergistic use of PVA fibers and CAs can significantly improve the compressive strength, bond strength and volume stability of the repair materials. The compressive strength and 40° shear strength of S0.6CA at 28 d were 101.7 MPa and 45.95 MPa, respectively. Under the seawater-freeze-thaw cycle action, the relationship between the contents of free and bound chloride ions in the bonded interface can be better fitted by the Langmuir equation. The deterioration process of the bonding interface and the penetration rate of chloride ions can be effectively delayed by PVA fiber and CAs. After 700 seawater-freeze-thaw cycles, the loss rates of bond strength and chloride diffusion coefficient of S0.6CA were reduced by 26.34% and 52.5%, respectively, compared with S0. Full article

In designing an optimized activated carbon-based adsorbent, several key factors are crucial for its practical application in the industrial sector, including high BET surface area, strong adsorption capacity, selectivity, mechanical and thermal stability, regeneration potential, environmental impact, and cost-effectiveness. This study explores the innovative approach of combining two chemical activating agents, potassium carbonate and sodium thiosulfate, to produce activated carbon with enhanced properties for improved mercury removal. At an activation temperature of 800 °C, the resulting adsorbent achieved a BET surface area of 2132.7 m²/g and a total pore volume of 1.08 cm³/g. Testing its mercury removal efficiency, the maximum adsorption capacity was 289 mg/g at room temperature. The Langmuir isotherm provided an excellent fit to the experimental data, indicating a monolayer adsorption process. Kinetic modeling revealed that the adsorption followed a pseudo-second-order model, consistent with chemisorption. The primary removal mechanism was found to involve complexation of mercury with oxygen and sulfur-containing functional groups, along with pore-filling physical adsorption. The adsorbent also showed a strong affinity for mercury even in the presence of other competing heavy metals. Furthermore, regeneration studies demonstrated the adsorbent’s effectiveness over five cycles. This research introduces a novel, environmentally friendly, and cost-efficient adsorbent for mercury removal. Full article

Six activated carbons from tomato (Solanum lycopersicum L.) stems (TS-AC) were synthesized by carbonization and chemical activation using potassium hydroxide (KOH) and sodium hydroxide (NaOH) at temperatures of 550, 650, and 750 °C. These TS-ACs were then evaluated as adsorbents to remove 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) from aqueous solutions. The adsorption kinetics of both herbicides followed the pseudo-second-order model, closely correlating with the mesopore volume of the TS-AC. The Langmuir isotherm accurately described the adsorption process for both 2,4-D and MCPA. The porous structure of TS-AC, characterized by micropore volume and specific surface area, significantly influenced the maximum adsorption capacities. The adsorption of both herbicides was pH dependent, but ionic strength had no significant effect. Regeneration testing, conducted over three cycles, showed less than a 15% reduction in herbicide adsorption capacity. This study demonstrates that agricultural waste, specifically tomato stems, can be effectively valorized by using simple activation techniques in TS-AC that are efficient adsorbents to remove organic pollutants, such as herbicides, from aqueous media. Full article

In the production process of horizontal wells, wellbore temperature data play a critical role in predicting shale gas production. This study proposes a coupled thermo-hydro-mechanical (THM) mathematical model that accounts for the influence of the stress field when determining the distribution of wellbore temperature. The model integrates the effects of heat transfer in the temperature field, gas transport in the seepage field, and the mechanical deformation of shale induced by the stress field. The coupled model is solved using the finite difference method. The model was validated against field data from shale gas production, and sensitivity analyses were conducted on seven key parameters related to the stress field. The findings indicate that the stress field exerts an influence on both the wellbore temperature distribution and the total gas production. Neglecting the stress field effects may lead to an overestimation of shale gas production by up to 12.9%. Further analysis reveals that reservoir porosity and Langmuir volume are positively correlated with wellbore temperature, while permeability, Young’s modulus, Langmuir pressure, the coefficient of thermal expansion, and adsorption strain are negatively correlated with wellbore temperature. Full article

A technology that directly injects CO₂-rich industrial waste gas (CO₂-rich IWG) into underground spaces for unconventional natural gas extraction and waste gas storage has received increasing attention. The pore characteristics of coal and shale in a coal-bearing rock series before and after CO₂-rich IWG treatment are closely related to gas recovery and storage. In this study, three coals ranging from low to high rank and one shale sample were collected. The samples were treated with CO₂-rich IWG using a high-precision geochemical reactor. The changes in the pore volume (PV), specific surface area (SSA), and pore size distribution of micropores, mesopores, and macropores were analyzed. The correlations between the Langmuir volume and the PV and SSA of the micropores and mesopores were analyzed. It was confirmed that for micropores, SSA was the dominant factor influencing adsorption capacity. The effectively interconnected pore volume was calculated using macropores to characterize changes in the sample’s connectivity. It was found that the PV and SSA of the micropores in the coal samples increased with increasing coal rank. The CO₂-rich IWG treatment increased the PV and SSA of the micropores in all of the samples. In addition, for mesopores and macropores, the treatment reduced the SSA in the coal samples but enhanced it in the shale. The results of this study improve the understanding of the mechanisms of the CO₂-rich IWG treatment method and emphasize its potential in waste gas storage and natural gas extraction. Full article

To ensure agricultural safety and ecological security, it is crucial to effectively immobilize emerging organic pollutants, such as plasticizers, to prevent their migration in various environmental matrices. However, the ideal immobilization agent with the advantages of being environmentally friendly is very rare. In this study, low-cost and stable near-natural immobilization agents, char-derived artificial humic acids, CHAs, were proposed and prepared via hydrothermal humification (180 °C) and pyrolysis (300, 500, or 700 °C) of agroforestry biowaste. The resulting CHAs exhibit high purity (composed primarily of C (67.28–81.35%), O (6.65–21.64%), H (1.40–5.28%), and N (0.36–0.58%)) with remarkably low ash content (5.43–10.02%). Characterization revealed a compact structure with a limited porosity with small surface area (0.27–0.32 m² g⁻¹) and pore volume (2.99–3.43 × 10⁻⁴ cm³ g⁻¹). Notably, high-temperature pyrolysis induced consumption of oxygen-containing functional groups while promoting aromatic structure formation. The sorption behavior of diethyl phthalate, a representative plasticizer, on CHAs was well described by both Langmuir isotherm and pseudo-second-order kinetic models. The CHAs exhibited remarkable sorption performance for diethyl phthalate, with a maximum sorption capacity reaching 3345 mg kg⁻¹ as determined by the Langmuir model. The sorption of diethyl phthalate onto CHAs is mainly multi-layer sorption dominated by physical processes, mainly including pore filling, partitioning, hydrogen bonding, and π–π stacking. Mean sorption energies ranging from 2.56 to 4.99 × 10⁻³ kJ mol⁻¹ indicate the predominance of physical sorption mechanisms. This study developed a method to convert the liquid by-product produced during hydrothermal humification of biowaste into stable near-natural and carbon-rich char materials, and the proposed materials show great promise in immobilizing pollutants from various environmental matrices. Full article

The ubiquity of diclofenac (DCF) in the environment has raised significant concerns. Diclofenac is a non-steroidal anti-inflammatory drug that has been found in various environmental matrices at minimum concentrations that are harmful to aquatic and terrestrial organisms. Traditional wastewater treatment plants (WWTPs) are not fully equipped to remove a range of pharmaceuticals, and that explains the continued ubiquity of DCF in surface waters. In this study, an Fe₃O₄/SiO₂ nanocomposite prepared from acid mine drainage and coal fly ash was applied for the removal of DCF from wastewater. Major functional groups (Si–O–Si and Fe–O) were discovered from FTIR. TEM revealed uniform SiO₂ nanoparticle rod-like structures with embedded dark spherical nanoparticles. SEM-EDS analysis discovered a sponge-like structure fused with Fe₃O₄ nanoparticles that had significant Si, O, and Fe content. XRD demonstrated the crystalline nature of the nanocomposite. The surface properties of the nanocomposite were evaluated using BET and were 67.8 m²/g, 0.39 cm³/g, and 23.2 nm for surface area, pore volume, and pore size, respectively. Parameters that were suspected to be affecting the removal process were evaluated, including pH, nanocomposite dosage, and sample volume. The detection of DCF was conducted on high-performance liquid chromatography with diode-array detection (HPLC-DAD). Under optimum conditions, the adsorption process was monolayer, and physisorption was described using the Langmuir and Dubinin-Radushkevich (D-R) isotherm models. The kinetic data best fitted the pseudo-first order kinetic model, indicating a physisorption adsorption process. The thermodynamic experimental data confirmed that the adsorption process was spontaneous. The results obtained from real water samples showed 95.28% and 97.44% removal efficiencies from influent and effluent: 94.83% and 88.61% from raw sewage and final sewage, respectively. Overall, this work demonstrated that an Fe₃O₄/SiO₂ nanocomposite could be successfully prepared from coal fly ash and acid mine drainage and could be used to remove DCF in wastewater. Full article

Black cotton soil (BCS) is unsuitable for construction due to its high plasticity, low shear strength, and significant volume changes upon wetting and drying. The present study investigates the effectiveness of an alkali-activated coconut husk ash (CHA) binder in improving the geotechnical properties of BCS. CHA is derived from coconut husk and serves as a sustainable binder. Microstructural characterization of untreated and CHA-treated BCS was carried out using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR). The specific surface area (SSA) and porosity were evaluated using nitrogen gas adsorption methods based on the Brunauer–Emmett–Teller (BET) and Langmuir techniques. The Barrett–Joyner–Halenda (BJH) method demonstrated a decrease in mean pore diameter from 6.7 nm to 6.2 nm following CHA treatment. The SSA diminished from 40.94 m²/g to 25.59 m²/g, signifying the development of calcium silicate hydrate (C-S-H) gels that occupied the pore spaces. The formation of pozzolanic reaction products enhanced the microstructural integrity of the treated soil. Unconfined compressive strength (UCS) test results at 24 h and 28 days of curing for CHA-treated soil have been incorporated to analyze the optimum binder content. The UCS values enhanced significantly from 182 kPa to 305 kPa and 1030 kPa, respectively, at 9% binder content after 24 h and 28 days of curing. The microstructural and mechanical strength test analysis results indicated that CHA is a feasible and environmentally sustainable substitute for BCS stabilization. CHA-based AAB will be an eco-friendly alternative to cement and lime, reducing CO₂ emissions and construction costs. Full article

This study identifies the following three key factors controlling shale gas reservoirs in the lower Cambrian Niutitang Formation, northern Guizhou, China: sedimentary features, diagenetic modification, and stable tectonic conditions. This research addresses gaps in previous studies by investigating how tectonic and diagenetic conditions contribute to the unique characteristics of shale gas enrichment in tectonically complex areas with high thermal maturity (R_o > 2.5%). Sedimentary conditions revealed a positive correlation between total organic carbon (TOC) content and gas adsorption capacity, with higher TOC enhancing adsorption. Experimental data indicate that the TOC content (2.33%–9.07%) significantly correlates with methane adsorption capacity (Langmuir volume VL = 1.87–8.78 cm³/g at 30 °C and 10 MPa), as evidenced by the linear relationship between TOC and VL in shale samples. Clay mineral content exhibited a dual role as moderate levels (15%–25%) improved adsorption, while excessive amounts (>30%) reduced efficiency due to pore occlusion. Diagenesis, including compaction, cementation, and thermal evolution of organic matter, significantly reshaped reservoir porosity. Quantitative analysis of core samples demonstrates that compaction caused a porosity reduction of 18%–25% in samples with burial depths exceeding 1500 m, thereby influencing gas retention capacity. The reservoir has entered the anchizone (average vitrinite reflectance R_o = 2.54%), characterized by advanced organic matter maturation and widespread organic porosity development. Tectonic activity was critical for gas retention; intense tectonic activity led to shallower burial depths and gas loss, whereas structurally stable areas favored preservation. This study emphasizes the significance of tectonic conditions and their role in maintaining gas reservoirs in the anchizone, reconciling discrepancies in gas storage mechanisms observed in basins with similar TOC and thermal maturity. In summary, deep marine shale gas enrichment relies on the synergistic effects of high-quality sedimentary foundations (TOC > 4%, quartz > 30%), diagenetic evolution optimizing pore structures, and stable tectonic conditions ensuring gas retention. These findings provide new insights into the exploration of shale gas in complex tectonic regions and offer a framework for improving prediction models in shale gas enrichment by integrating micro-scale organic–inorganic interactions with macro-scale tectonic controls. Full article

In this study, to identify an appropriate macroporous resin for the purification of the crude extract derived from Simiao Yong’an Decoction (SMYAD), five distinct resins were evaluated based on their adsorption and desorption performance. Through this comparative analysis, D101 macroporous adsorption resin was determined to be the most suitable candidate. Investigations into the adsorption mechanism revealed that the process followed pseudo-second-order kinetics and was well described by the Langmuir isotherm model. Thermodynamic analysis further indicated the spontaneous and exothermic nature of the adsorption process. Through systematic optimization, the ideal purification parameters for SMYAD were established as follows: sample loading volume—6 bed volumes (BV), eluent concentration—90% ethanol (v/v), and eluent volume—3 BV, with both adsorption and desorption flow rates maintained at 3 BV/h. Finally, the purification effect was evaluated by fingerprint and similarity analysis. Under the optimal purification process, the content of the five index components was as follows: harpagide (4.26 mg/g), chlorogenic acid (38.37 mg/g), ferulic acid (4.78 mg/g), liquiritin (7.42 mg/g), and harpagoside (10.25 mg/g). The yield of the five components ranged from 70.74% to 86.26%. In conclusion, this approach demonstrates rapid processing capabilities and high efficiency, offering valuable methodological insights for the isolation and purification of complex traditional Chinese medicine formulations using macroporous adsorption resins. Full article

The accumulation of coal gangue (CG), a byproduct of coal mining, poses severe environmental challenges. This study presents a green strategy to convert CG into high-value NaX zeolite via an alkali fusion–hydrothermal method. Through orthogonal experiments, the optimal synthesis conditions (solid–liquid ratio 1:8, crystallization temperature 110 °C, time 12 h) were identified, yielding NaX zeolite with exceptional crystallinity (98%), specific surface area (703.5 m²/g), and pore volume (0.28 cm³/g). Comprehensive characterization (XRD, SEM-EDS, BET, etc.) confirmed its structural integrity and thermal stability. The synthesized zeolite exhibited remarkable adsorption capacities for Cu²⁺ (185.35 mg/g) and CO₂ (5.51 mmol/g), following the Langmuir isotherm model. This work not only addresses gangue disposal challenges but also demonstrates a cost-effective route for producing high-performance adsorbents, aligning with circular economy and carbon neutrality goals. Full article

The indiscriminate discharge of common dyes, such as malachite green (MG), poses significant risks to water quality and human health. To address this issue, a biochar (MBC) was synthesized from waste Myriophyllum aquaticum biomass (MAB) and further activated with KOH to produce micro-mesoporous biochar (KMBC) with enhanced adsorption efficiency. Characterization results demonstrated that KMBC exhibits a higher specific surface area (1632.7 m²/g) and a larger pore volume (0.759 cm³/g) compared to MBC. Batch adsorption experiments revealed that the adsorption process follows pseudo-second-order kinetics and the Langmuir isotherm model, with the theoretical maximum adsorption capacities of MBC and KMBC reaching 1772.3 mg/g and 2570.7 mg/g, respectively and the adsorption is a spontaneous, endothermic, and entropy-driven process. Key mechanisms involved in the adsorption process include hydrogen bonding, hydrophobic interactions, and surface complexation. Due to electrostatic attraction, selective adsorption experiments confirmed that MBC can effectively separate cationic dyes such as MG from mixed anionic-cationic systems. Dynamic experiments showed that the breakthrough curve data fit well with the Thomas model. In summary, MAB-derived biochar demonstrates significant potential for practical applications in the treatment of MG-contaminated wastewater. Full article

Reverse osmosis concentrate (ROC) treatment is critical for enhancing water recovery and minimizing concentrate volume for disposal, especially in regions facing water scarcity. This study investigates the application of ion exchange (IX) resins and activated alumina (AA) as pretreatment strategies to mitigate scaling in ROC due to high concentrations of total dissolved solids, hardness (Ca²⁺ and Mg²⁺), and silica. Through a series of Langmuir isotherms, continuous column experiments, and model simulation, two types of strong acid cation IX resins and three types of strong base anion IX resins alongside three types of AA were evaluated. Results indicate that AA exhibits superior performance in silica removal, achieving up to a 65% reduction and maintaining performance for up to 800 bed volume without reaching saturation. Model simulation of a secondary reverse osmosis treating ROC after the IX and AA pretreatment indicated an additional water recovery of ~70% using antiscalants. This study demonstrates the potential for achieving higher water recovery while also identifying opportunities for pretreatment improvement. Challenges such as the limited IX capacity treating ROC, which requires frequent regeneration and increases operational costs, along with the restricted regeneration capacity of AA, underscore the importance of innovation. These findings emphasize the critical need for developing advanced materials and optimized strategies to further enhance the efficiency of ROC treatment processes. Full article