Search Results (855)

The Vehicular Internet of Things (V-IoT) has emerged as a cornerstone of next-generation intelligent transportation systems (ITSs), enabling applications ranging from safety-critical collision avoidance and cooperative awareness to infotainment and fleet management. These heterogeneous services impose stringent quality-of-service (QoS) demands for latency, reliability, and fairness while competing for limited and dynamically varying spectrum resources. Conventional schedulers, such as round-robin or static priority queues, lack adaptability, whereas deep reinforcement learning (DRL) solutions, though powerful, remain computationally intensive and unsuitable for real-time roadside unit (RSU) deployment. This paper proposes a lightweight and interpretable reinforcement learning (RL)-based spectrum management framework for Vehicular Internet of Things (V-IoT) networks. Two enhanced Q-Learning variants are introduced: a Value-Prioritized Action Double Q-Learning with Constraints (VPADQ-C) algorithm that enforces reliability and blocking constraints through a Constrained Markov Decision Process (CMDP) with online primal–dual optimization, and a contextual Q-Learning with Upper Confidence Bound (Q-UCB) method that integrates uncertainty-aware exploration and a Success-Rate Prior (SRP) to accelerate convergence. A Risk-Aware Heuristic baseline is also designed as a transparent, low-complexity benchmark to illustrate the interpretability–performance trade-off between rule-based and learning-driven approaches. A comprehensive simulation framework incorporating heterogeneous traffic classes, physical-layer fading, and energy-consumption dynamics is developed to evaluate throughput, delay, blocking probability, fairness, and energy efficiency. The results demonstrate that the proposed methods consistently outperform conventional Q-Learning and Double Q-Learning methods. VPADQ-C achieves the highest energy efficiency (≈$8.425\times {10}^7$ bits/J) and reduces interruption probability by over $60\%$, while Q-UCB achieves the fastest convergence (within ≈190 episodes), lowest blocking probability (≈0.0135), and lowest mean delay (≈0.351 ms). Both schemes maintain fairness near $0.364$, preserve throughput around 28 Mbps, and exhibit sublinear training-time scaling with $\mathcal{O}\left(1\right)$ per-update complexity and $\mathcal{O}\left(N^2\right)$ overall runtime growth. Scalability analysis confirms that the proposed frameworks sustain URLLC-grade latency (<0.2 ms) and reliability under dense vehicular loads, validating their suitability for real-time, large-scale V-IoT deployments. Full article

A common problem in the development of Internet-of-Things (IoT) and cyber–physical system (CPS) applications is the complexity of these domains, due to their hybrid and distributed nature at multiple layers (hardware, network, communication, frameworks, etc.). This complexity often leads to implementation errors, some of which result in undesired states of the application and/or the system. The current work focuses on low-code development of behavior verification processes for IoT and CPS applications, in order to raise productivity, minimize risks (due to errors) and enable access to a wider range of end-users to create and verify applications for state-of-the-art domains, such as smart home and smart industry. Model-Driven Development (MDD) approaches are employed for the implementation of a Domain-Specific Language (DSL) that enables the evaluation of IoT and CPS applications, among others. The proposed methodology automates the development of behavior verification processes, allowing domain experts to focus on the real problem, instead of struggling with technical and technological breaches. Through comparative scenario-based analysis and 43 detailed use cases, we illustrate how the proposed methodology automates the development of behavior verification processes, allowing end-users to focus on the verification definition, instead of technical and technological intricacies. Full article

This paper presents a comprehensive design framework for Enterprise Architecture aimed at facilitating decision-driven analytics in smart factories. The motivation behind this research lies in challenges faced by manufacturing companies, such as skilled labor shortages and increasing global competition, alongside the imperative for sustainable production. This journal provides a novel approach for designing and documenting prescriptive analytics use cases in manufacturing environments. The framework addresses the need for effective integration of advanced data analytics and prescriptive analytics solutions within existing production environments, thereby enhancing operational efficiency and decision-making processes. A Design Science Research approach is used to iteratively derive a framework based on stakeholder needs and activities along the prescriptive analytics use case development cycle. The resulting framework is demonstrated and evaluated in an IoT Factory setup in a research facility. From a practical perspective, the framework supports manufacturing companies in systematically designing prescriptive analytics use cases. From a research perspective, it contributes to the body of knowledge on Enterprise Architecture Management (EAM) by operationalizing the design of prescriptive analytics use cases in manufacturing contexts. The main contributions of this study include the development of a framework that supports the planning, design, and integration of prescriptive analytics use cases. This framework fosters interdisciplinary collaboration and aids in managing the complexity of data-driven projects. Full article

Improving the energy efficiency of traditional production methods while preserving their cultural and economic value is a challenge aligned with the Sustainable Development Goals of the 2030 agenda. Refrigeration during cheese maturation is particularly energy-intensive, contributing significantly to greenhouse gas emissions and operating costs. An approach to make traditional cheese production more sustainable, through the development of a prototype ripening chamber with a natural refrigerant-based refrigeration system powered by renewable energy was studied. A dedicated system based on an Internet of Things architecture was developed using low-cost sensors, microcontroller units, and single-board computers to enable real-time measurement and monitoring of environmental variables and energy consumption throughout the ripening process. A comparative analysis was conducted using ewe’s milk cheese, produced and ripened with Protected Designation of Origin conditions, in both the prototype and the conventional chambers over four weeks, quantifying energy consumption and evaluating product quality. Results demonstrate the technical feasibility of energy efficient and sustainable refrigeration systems, as well as the possibility of retrofitting installed cheese ripening chambers with affordable IoT monitoring systems, while maintaining traditional cheese quality standards. Full article

With the rapid deployment of intelligent transportation systems (ITS), the Internet of Vehicles (IoV) has become an increasingly vital component in the development of smart cities. However, the openness of IoV also gives rise to critical issues such as message security and identity privacy. Consequently, addressing message authentication in the IoV environment is a fundamental requirement for ensuring its sustainable and stable evolution. Firstly, this paper proposes an adaptive traffic authentication strategy (ATAS) By integrating traffic flow dynamics evaluation, traffic status scoring, time sensitivity assessment, and comprehensive strategy decision-making, the scheme achieves an effective balance between authentication efficiency and security in IoV scenarios. Secondly, to tackle the high overhead and security issues caused by multiple message transmissions in large-scale IoV application scenarios, this paper proposes a secure message transmission and authentication method based on the cloud-edge-client collaborative architecture. Leveraging aggregate message authentication code (AMAC) technology, this method validates both the authenticity and integrity of messages, effectively reducing communication overhead while maintaining reliable authenticated transmission. Finally, this paper builds an IoV co-simulation experimental environment using the SUMO 1.19.0, OMNeT++ 6.0.3, and Veins 5.0.0 software platforms. It simulates the interactive authentication process among vehicles, Road Side Units (RSUs), and the cloud platform, as well as the effects of traffic response strategies under different scenarios. The results demonstrate the potential of IoV authentication technology in improving traffic management efficiency, optimizing road resource utilization, and enhancing traffic safety, providing strong support for the secure communication and efficient management of IoV. Full article

Zero-day attacks pose unprecedented challenges to modern cybersecurity frameworks, exploiting unknown vulnerabilities that evade traditional signature-based detection systems. This paper presents ZeroDay-LLM, a novel large language model framework specifically designed for real-time zero-day threat detection in IoT and cloud networks. The proposed system integrates lightweight edge encoders with centralized transformer-based reasoning engines, enabling contextual understanding of network traffic patterns and behavioral anomalies. Through comprehensive evaluation on benchmark cybersecurity datasets including CICIDS2017, NSL-KDD, and UNSW-NB15, ZeroDay-LLM demonstrates superior performance, with a 97.8% accuracy in detecting novel attack signatures, a 23% reduction in false positives compared to traditional intrusion detection systems, and enhanced resilience against adversarial evasion techniques. The framework achieves real-time processing capabilities with an average latency of 12.3 ms per packet analysis while maintaining scalability across heterogeneous network infrastructures. Experimental results across urban, rural, and mixed deployment scenarios validate the practical applicability and robustness of the proposed approach. Full article

Wireless sensor networks play a crucial role in IoT applications. Traditional range query methods have limitations in multi-sensor data fusion and energy efficiency. This paper proposes a new range query method for two-layer wireless sensor networks. The method supports data fusion operations directly on storage nodes. Communication costs between sink nodes and storage nodes are significantly reduced. Reverse Z-O coding optimizes the encoding process by focusing only on the most valuable data. This approach shortens both encoding time and length. Data security is ensured using the Paillier homomorphic encryption algorithm. A comparison chain for the most valuable data is generated using Reverse Z-O coding and HMAC. Storage nodes can perform multi-sensor data fusion under encryption. Experiments were conducted on Raspberry Pi 2B+ and NVIDIA TX2 platforms. Performance was evaluated in terms of fusion efficiency, query dimensions, and data volume. The results demonstrate secure and efficient multi-sensor data fusion with lower energy consumption. The method outperforms existing approaches in reducing communication and computational costs. Full article

6G low-power and lossy network (6G LLN) is a kind of distributed network designed for IoT and edge computing scenarios of the sixth-generation mobile communication technology. Its routing technologies should fully consider characteristics of green and low carbon, constrained nodes, lossy links, etc. This paper proposes an improved routing protocol for low-power and lossy networks (I-RPL) to better suit the characteristics of 6G LLN and meet its application requirements. I-RPL has designed new context-aware routing metrics, which include the residual energy indicator, buffer utilization ratio, ETX, delay, and hop count to meet multi-dimensional network QoS requirements. The candidate parent and its preferred parent’s residual energy indicator and buffer utilization ratio are calculated recursively to reduce the effect of upstream parents. ETX and delay calculating methods are improved to ensure a better performance. Moreover, I-RPL has optimized the network construction process to improve energy and protocol efficiency. I-RPL has designed scientific multiple routing metrics evaluation theories (Lagrangian multiplier theories), proposed new rank computing and optimal route selecting mechanisms to simplify protocol, and optimized broadcast suppression and network reliability. Finally, theoretical analysis and experiment results show that the average end-to-end delay of I-RPL is 13% lower than that of RPL; the average alive node number increased 11% and so on. So, I-RPL can be applied well to the 6G LLN and is superior to RPL and its improvements. Full article

This research develops and applies the IoTRIM model to assess the economic and operational implications of IoT integration in postal and courier enterprises in Slovakia. Combining a multi-criteria evaluation framework with an extended Cobb–Douglas production function, the analysis captures both readiness levels and their translation into output performance. The IoTRIM assessment reveals heterogeneous distributions of strengths across four strategic and technical pillars, with notable disparities between connectivity, data analytics, and interoperability capacities. Monte Carlo simulations under pessimistic, realistic, and optimistic scenarios highlight divergent digital trajectories among enterprises, with some demonstrating accelerated gains from IoT readiness while others face structural bottlenecks in infrastructure and process integration. Hypothesis testing indicates that while a positive and statistically significant relationship between IoT readiness and output is observed in selected cases, this effect is not universal across all enterprises and scenarios. However, the inclusion of IoT readiness consistently improves the explanatory power of the production function models. The findings underline that digital transformation outcomes depend not only on investment scale but also on systemic absorption capacity, including interoperability, data governance, and organizational alignment. The proposed approach offers both a methodological contribution for measuring digital readiness impacts and practical insights for strategic planning in the postal and courier sector. Full article

In today’s digital ecosystem, where millions of users interact with diverse online services and generate vast amounts of textual, transactional, and behavioral data, ensuring the trustworthiness of this information has become a critical challenge. Low-quality data—manifesting as incompleteness, inconsistency, duplication, or noise—not only undermines analytics and machine learning models but also exposes unsuspecting users to unreliable services, compromised authentication mechanisms, and biased decision-making processes. Traditional data quality assessment methods, largely based on manual inspection or rigid rule-based validation, cannot cope with the scale, heterogeneity, and velocity of modern data streams. To address this gap, we propose DQMAF (Data Quality Modeling and Assessment Framework), a generalized machine learning–driven approach that systematically profiles, evaluates, and classifies data quality to protect end-users and enhance the reliability of Internet services. DQMAF introduces an automated profiling mechanism that measures multiple dimensions of data quality—completeness, consistency, accuracy, and structural conformity—and aggregates them into interpretable quality scores. Records are then categorized into high, medium, and low quality, enabling downstream systems to filter or adapt their behavior accordingly. A distinctive strength of DQMAF lies in integrating profiling with supervised machine learning models, producing scalable and reusable quality assessments applicable across domains such as social media, healthcare, IoT, and e-commerce. The framework incorporates modular preprocessing, feature engineering, and classification components using Decision Trees, Random Forest, XGBoost, AdaBoost, and CatBoost to balance performance and interpretability. We validate DQMAF on a publicly available Airbnb dataset, showing its effectiveness in detecting and classifying data issues with high accuracy. The results highlight its scalability and adaptability for real-world big data pipelines, supporting user protection, document and text-based classification, and proactive data governance while improving trust in analytics and AI-driven applications. Full article

This paper presents the concept and development of an autonomous DIY air quality sensor for citizen science. Large civil monitoring projects often rely on air quality calculations based on PM2.5 and PM10 dust readings in combination with some gases and do not cover the full list of air quality indicators. The authors have analyzed existing air quality calculation methodologies and attempted to conceptualize a universal AQI monitoring device for use in citizen science and by volunteers. This device is based on the available ESP32 DevKit v1 platform to which compatible sensors have been selected to monitor AQI indicators such as PM2.5 and PM10 dust particles, ozone, carbon monoxide, nitrogen dioxide, sulfur dioxide, and ammonia. The SD card module was chosen for data storage, the NB-IoT module for data transmission, and a battery pack for autonomy. The housing, sensor design components, and fasteners were also selected. All components are available on the international market. Based on the selected element base, an electrical connection diagram was designed, the device’s design, presented in the form of 3D models, was developed, and the assembly process was described. The cost of the device was also evaluated and compared to the price level of existing DIY devices used in citizen science. Full article

The evolution of Industrial Internet of Things (IIoT) systems demands flexible and intelligent architectures capable of addressing low-latency requirements, real-time analytics, and adaptive resource management. In this context, softwarized edge computing emerges as a key enabler, supporting advanced IoT deployments through programmable infrastructures, distributed intelligence, and seamless integration with cloud environments. This paper presents an extended and publicly available proof of concept (PoC) for a softwarized, data-driven architecture designed to operate across the cloud/edge/IoT continuum. The proposed architecture incorporates containerized microservices, open standards, and ML-based inference services to enable runtime decision-making and on-the-fly network reconfiguration based on real-time telemetry from IIoT nodes. Unlike traditional solutions, our approach leverages a modular control plane capable of triggering dynamic adaptations in the system through RESTful communication with a cloud-hosted inference engine, thus enhancing responsiveness and autonomy. We evaluate the system in representative IIoT scenarios involving multi-agent collaboration, showcasing its ability to process data at the edge, minimize latency, and support real-time decision-making. This work contributes to the ongoing efforts toward building advanced IoT ecosystems by bridging conceptual designs and practical implementations, offering a robust foundation for future research and deployment in intelligent, software-defined industrial environments. Full article

The rapid development of contemporary artificial intelligence and Internet of Things (IoT) technologies has given rise to the emerging paradigm of the AIoT (Artificial Intelligence of Things), which is profoundly impacting human life and driving the digital transformation of industries and society. The AIoT not only enhances product functionality and convenience but also accelerates the achievement of the United Nations Sustainable Development Goals (SDGs). However, the widespread adoption of these technologies still poses challenges related to social inclusivity, particularly regarding insufficient accessibility for elderly users, which may exacerbate the digital divide and social inequality, contradicting SDG 10 (reducing inequality). This study integrates AIoT product development processes based on sustainability and universal design principles using methods such as Quality Function Deployment, the Analytic Hierarchy Process, the Scenario Method, the Entropy Weight Method, and Fuzzy Comprehensive Evaluation. The features of this process include ease of operation and high flexibility, making it suitable for cross-departmental product development while prioritizing the needs of diverse age groups throughout the development process. The research findings indicate that the AIoT product concepts proposed can meet the needs of diverse users, contributing to the realization of age-friendly products. This study provides a reference point for future AIoT product development, promoting the inclusive and sustainable development of smart technology. Full article

Ensuring hygiene compliance in regulated environments—such as food processing facilities, hospitals, and public indoor spaces—requires reliable detection of personal protective equipment (PPE) usage, including gloves, face masks, and hairnets. Manual inspection is labor-intensive and unsuitable for continuous, real-time enforcement. This study benchmarks three lightweight object detection models—YOLOv8n, YOLOv10n, and YOLOv12n—for automated PPE compliance monitoring using a large curated dataset of over 31,000 annotated images. The dataset spans seven classes representing both compliant and non-compliant conditions: glove, no_glove, mask, no_mask, incorrect_mask, hairnet, and no_hairnet. All evaluations were conducted using both detection accuracy metrics (mAP@50, mAP@50–95, precision, recall) and deployment-relevant efficiency metrics (inference speed, model size, GFLOPs). Among the three models, YOLOv10n achieved the highest mAP@50 (85.7%) while maintaining competitive efficiency, indicating strong suitability for resource-constrained IoT-integrated deployments. YOLOv8n provided the highest localization accuracy at stricter thresholds (mAP@50–95), while YOLOv12n favored ultra-lightweight operation at the cost of reduced accuracy. The results provide practical guidance for selecting nano-scale detection models in real-time hygiene compliance systems and contribute a reproducible, deployment-aware evaluation framework for computer vision in hygiene-critical settings. Full article

Background: Dementia is a progressive neurodegenerative condition that impairs cognitive functions such as memory, language comprehension, and problem-solving. Assistive technologies can provide vital support at various stages of dementia, significantly improving the quality of life by aiding daily activities and care. However, for these technologies to be effective and widely adopted, a human-centred design (HCD) approach is of consequence for both their development and evaluation. Objectives: This scoping review aims to explore how HCD principles have been applied in the design of assistive technologies for people with dementia and to identify the extent and nature of their involvement in the design process. Eligibility Criteria: Studies published between 2017 and 2025 were included if they applied HCD methods in the design of assistive technologies for individuals at any stage of dementia. Priority was given to studies that directly involved people with dementia in the design or evaluation process. Sources of Evidence: A systematic search was conducted across five databases: Web of Science, JSTOR, Scopus, and ProQuest. Charting Methods: Articles were screened in two stages: title/abstract screening (n = 350) and full-text review (n = 89). Data from eligible studies (n = 49) were extracted and thematically analysed to identify design approaches, types of technologies, and user involvement. Results: The 49 included studies covered a variety of assistive technologies, such as robotic systems, augmented and virtual reality tools, mobile applications, and Internet of Things (IoT) devices. A wide range of HCD approaches were employed, with varying degrees of user involvement. Conclusions: HCD plays a critical role in enhancing the development and effectiveness of assistive technologies for dementia care. The review underscores the importance of involving people with dementia and their carers in the design process to ensure that solutions are practical, meaningful, and capable of improving quality of life. However, several key gaps remain. There is no standardised HCD framework for healthcare, stakeholder involvement is often inconsistent, and evidence on real-world impact is limited. Addressing these gaps is crucial to advancing the field and delivering scalable, sustainable innovations. Full article