Search Results (78)

The new mineral achyrophanite (K,Na)₃(Fe³⁺,Ti,Al,Mg)₅O₂(AsO₄)₅ was found in high-temperature sublimates of the Arsenatnaya fumarole at the Second scoria cone of the Northern Breakthrough of the Great Tolbachik Fissure Eruption, Tolbachik volcano, Kamchatka, Russia. It is associated with aphthitalite-group sulfates, hematite, alluaudite-group arsenates (badalovite, calciojohillerite, johillerite, nickenichite, hatertite, and khrenovite), ozerovaite, pansnerite, arsenatrotitanite, yurmarinite, svabite, tilasite, katiarsite, yurgensonite, As-bearing sanidine, anhydrite, rutile, cassiterite, and pseudobrookite. Achyrophanite occurs as long-prismatic to acicular or, rarer, tabular crystals up to 0.02 × 0.2 × 1.5 mm, which form parallel, radiating, bush-like, or chaotic aggregates up to 3 mm across. It is transparent, straw-yellow to golden yellow, with strong vitreous luster. The mineral is brittle, with (001) perfect cleavage. D_calc is 3.814 g cm^–3. Achyrophanite is optically biaxial (+), α = 1.823(7), β = 1.840(7), γ = 1.895(7) (589 nm), 2V (meas.) = 60(10)°. Chemical composition (wt.%, electron microprobe) is: Na₂O 3.68, K₂O 9.32, CaO 0.38, MgO 1.37, MnO 0.08, CuO 0.82, ZnO 0.48, Al₂O₃ 2.09, Fe₂O₃ 20.42, SiO₂ 0.12, TiO₂ 7.35, P₂O₅ 0.14, V₂O₅ 0.33, As₂O₅ 51.88, SO₃ 1.04, and total 99.40. The empirical formula calculated based on 22 O apfu is Na_1.29K_2.15Ca_0.07Mg_0.34Mn_0.01Cu_0.11Zn_0.06Al_0.44Fe³⁺_2.77Ti_1.00Si_0.02P_0.02S_0.14V_0.04As_4.90O₂₂. Achyrophanite is orthorhombic, space group P222₁, a = 6.5824(2), b = 13.2488(4), c = 10.7613(3) Å, V = 938.48(5) ų and Z = 2. The strongest reflections of the PXRD pattern [d,Å(I)(hkl)] are 5.615(59)(101), 4.174(42)(022), 3.669(31)(130), 3.148(33)(103), 2.852(43)(141), 2.814(100)(042, 202), 2.689(29)(004), and 2.237(28)(152). The crystal structure of achyrophanite (solved from single-crystal XRD data, R = 4.47%) is unique. It is based on the octahedral-tetrahedral M-T-O pseudo-framework (M = Fe³⁺ with admixed Ti, Al, Mg, Na; T = As⁵⁺). Large-cation A sites (A = K, Na) are located in the channels of the pseudo-framework. The achyrophanite structure can be described as stuffed, with the defect heteropolyhedral pseudo-framework derivative of the orthorhombic Fe³⁺AsO₄ archetype. The mineral is named from the Greek άχυρον, straw, and φαίνομαι, to appear, in allusion to its typical straw-yellow color and long prismatic habit of crystals. Full article

This experiment aimed to evaluate the effects of supplementing miMCFA, lignocellulose, and HKL137 on lactating sow performance and nutritional composition and immunity in colostrum. Fifty 3–4 parity sows (Large White × Landrace) were randomly assigned to one of five treatments: (1) control (CON) without supplementation, (2) miMCFA (S1), (3) miMCFA + lignocellulose (S2), (4) miMCFA + HKL137 (S3), and (5) miMCFA + lignocellulose + HKL137 (S4). Supplements were daily added to the morning meal for 21 days (day 100 of gestation to day 7 post-farrowing). Compared with CON, the S1 and S4 groups had improvements (p < 0.01) in live-born piglet numbers, and colostrum yield. Fat content in colostrum was significantly increased (p < 0.01) in the S3 and S4 groups than those of CON group. Additionally, IgG levels were significantly greatest (p < 0.05) in the S3 and S4 groups. Likewise, IgM levels were notably highest (p < 0.05) in the S2 and S4 groups. These results indicated that the synergistic administration of miMCFA, lignocellulose, and HKL137 resulted in significant enhancements in both sow performance indices and colostrum metrics, encompassing both quantitative and qualitative parameters. Full article

Eutrophication and its resultant cyanobacterial blooms are a severe environmental issue in global water bodies, and phosphate is regarded as one of the primary triggers. In this study, the in situ-synthesized heated kaolinite lanthanum hydroxide composite (HKL-LH) was used to treat cyanobacterial blooms through phosphate removal. A typical cyanobacteria species—Microcystis aeruginosa—was selected as the target organism. HKL-LH efficiently removed phosphate in the solution with the inoculation of M. aeruginosa over the course of one day. A good performance of HKL-LH on control cyanobacterial blooms with initial cell densities ranging from 10⁴ cells mL⁻¹ to 10⁵ cells mL⁻¹ was observed. Although the genetic expression relating to photosynthesis and cell division was upregulated under the stress of phosphorus deficiency, M. aeruginosa growth was significantly inhibited, i.e., the inhibition rate of up to 98% was achieved by 0.1g L⁻¹ of HKL-LH. In addition to cell growth, the photosynthetic activity and viability of M. aeruginosa cells were decreased by HKL-LH. Furthermore, the production of associated toxins (microcystins) and algal organic matters were effectively inhibited, which can reduce the ecological risk and challenges that follow water treatment. In this study, it is shown that HKL-LH has excellent application potential in the mitigation of cyanobacterial blooms in eutrophic water. Full article

Nioboixiolite-(□) is a new mineral found in a carbonatite sill from the Bayan Obo mine, Baotou City, Inner Mongolia, China. It occurs as anhedral to subhedral grains (100 to 500 μm in diameter) that are disseminated in carbonatite rock composed of dolomite, calcite, magnetite, apatite, biotite, actionlike, zircon, and columbite-(Fe). Most of these grains are highly serrated, with numerous inclusions of columbite-(Fe). The mineral is gray to deep black in color; is opaque, with a semi-metallic luster; has a black streak; and is brittle, with an uneven conchoidal splintery. The Mohs hardness is 6–6½, and the calculated density is 6.05 g/cm³. The reflection color is gray with a blue tone, and there is no double reflection color. The measured reflectivity of nioboixiolite-(□) is about 10.6%~12.1%, close to that of ixiolite (11%–13%). Nioboixiolite-(□) is non-fluorescent under 254 nm (short-wave) and 366 nm (long-wave) ultraviolet light. The average chemical analysis results (wt.%) of twelve electron microprobe analyses are F 0.01, MnO 0.12, MgO 0.15, BaO 0.62, PbO 0.91, SrO 1.49, CaO 2.76, Al₂O₃ 0.01, TREE₂O₃ 1.58, Fe₂O₃ 3.57, ThO₂ 0.11, SiO₂ 1.69, TiO₂ 3.68, Ta₂O₅ 13.95, Nb₂O₅ 47.04, and UO₃ 21.56, with a total of 99.25. The simplified formula is [Nb⁵⁺, Ta⁵⁺,Ti⁴⁺, Fe³⁺,□,]O₂. X-ray diffraction data show that nioboixiolite-(□) is orthorhombic, belonging to the space group Pbcn (#60). The refined unit cell parameters are a = 4.7071(5) Å, b = 5.7097(7) Å, c = 5.1111(6) Å, V = 138.31(3), and β = 90(1) °Å³ with Z = 4. In the crystal structure of nioboixiolite-(□), all cations occupy a single M1 site. In these minerals, edge-sharing M₁O₆ octahedra form chains along the c direction. In this direction, the chains are connected with each other via common vertices of the octahedra. The strongest measured X-ray powder diffraction lines are [d in Å, (I/I0), (hkl)]: 3.662(20) (110), 2.975(100) (111), 2.501(20) (021), 1.770(20) (122), 1.458(20) (023). A type specimen was deposited in the Geological Museum of China with catalogue number M16118, No. 15, Yangrou Hutong, Xisi, Beijing 100031, People’s Republic of China. Full article

Background and Objectives: Hypertensive patients’ knowledge and adherence to prescribed medicines are critical in managing their condition, as poor adherence may lead to adverse cardiac and cerebrovascular events. The present study assessed hypertension-related knowledge and medication adherence among hypertensive patients attending primary health centers (PHCs) in the Aljouf Province, Saudi Arabia. Materials and Methods: Using a cross-sectional design, we conducted this survey on 390 patients. Self-reported hypertension knowledge was assessed using the Hypertension Knowledge Level Scale (HK-LS), and medication adherence was determined using the Hill–Bone Medication Adherence Scale. We used binomial regression analysis (adjusted with other variables) to find the associated factors of medication adherence. Results: This study found that nearly half (49.2%) of the participants had inadequate knowledge, and poor medication adherence was noted in 40.8% of the participants. We found a positive correlation between HK-LS and the Hill–Bone Medication Adherence Scale scores (Spearman’s rho = 0.312, p = 0.002). Medication adherence was significantly associated with job status (private sector (ref: public sector, adjusted odds ratio [AOR] = 2.02, 95% CI = 1.18–3.62, p = 0.005)), living in an urban region (ref: rural, AOR = 3.61, 95% CI = 1.85–5.72, p = 0.002), and duration since diagnosis of more than 5 years (ref: ≤1 year, AOR = 3.53, 95% CI = 2.36–4.95, p = 0.001). Conclusions: The present study findings indicate that there is still a critical gap in managing hypertension at the PHCs in this region, and this may lead to poor health outcomes among the patients and burden the healthcare system. Hence, continuous patient education and targeted counseling are recommended for those with poor medication adherence. Full article

Magnesium-based materials are an interesting solution in terms of medical applications. Alloys that are hard to obtain via standard means may be manufactured via mechanical alloying (MA), which allows the production of materials with complex a chemical composition and non-equilibrium structures. This work aimed to investigate materials obtained by the MA process for 5, 8, 13, and 20 h in terms of their phase composition and changes during heating. The results of thermal XRD analysis were in the temperature range between 25 and 360 °C, which revealed MgZn₂, PrZn₁₁, Ca₂Mg₅Zn₁₃, and Ca phases as well as α-Mg and α-Zn solid solution. The structural analysis features the powder morphology of the analyzed samples, showing cold-welding and fracturing processes leading to their homogenization, which is supported by the EDS results. The base Mg-Zn-Ca alloy was modified by different additions, but a thorough analysis of the influence of praseodymium on its thermal properties has not yet been performed. We chose to focus on Pr addition because it belongs to low-toxicity rare earth metals, which is an essential feature of biomaterials. Also, the Ca₂Mg₅Zn₁₃ phase is not fully known, as there are no crystallographic data (hkl). Therefore, the investigation is important and scientifically justified. Full article

The new mineral calcioveatchite, ideally SrCaB₁₁O₁₆(OH)₅·H₂O, is a Ca-Sr-ordered analogue of veatchite. It was found at the Nepskoe potassium salt deposit, Irkutsk Oblast, Siberia, Russia in halite-sylvite and sylvite-carnallite rocks, with boracite, hilgardite, kurgantaite, hydroboracite, volkovskite, veatchite, anhydrite, magnesite, and quartz. Calcioveatchite forms prismatic or tabular crystals up to 1 × 1.5 × 3 mm³ and crystal clusters up to 3 mm across. It is transparent and colourless with vitreous lustre. Calcioveatchite is brittle, cleavage is perfect on {010}, the Mohs’ hardness is ca 2, D_meas is 2.58(1), and D_calc is 2.567 g cm⁻³. Calcioveatchite is optically biaxial (+), α = 1.543(2), β = 1.550(5), γ = 1.626(2), 2V_meas = 30(10)°, and 2V_calc = 35°. The average chemical composition (wt.%, electron microprobe, H₂O calculated by stoichiometry) is: CaO 7.05, SrO 20.70, B₂O₃ 61.96, H₂O 10.22, and total 99.93. The empirical formula, calculated based on 22 O apfu = O₁₆(OH)₅(H₂O) pfu, is Sr_1.23Ca_0.78B_10.99O₁₆(OH)₅·H₂O. Calcioveatchite is monoclinic, space group P2₁, a = 6.7030(3), b = 20.6438(9), c = 6.6056(3) Å, β = 119.153(7)°, V = 798.26(8) ų, and Z = 2. Polytype: 1M. The strongest reflections of the powder XRD pattern [d,Å(I,%)(hkl)] are: 10.35(100)(020), 5.633(12)(110), 5.092(10)(120), 3.447(14)(060), 3.362(13)(101, 051), 3.309(38)(–102), 2.862(10)(012), and 2.585(19)(080). The crystal structure was solved based on single-crystal XRD data, R1 = 0.0420. Calcioveatchite (calcioveatchite-1M) is an isostructural analogue of veatchite-1M with the 11-fold cation polyhedron occupied mainly by Sr [Sr_0.902(8)Ca_0.098(8)] whereas the 10-fold polyhedron is Ca dominant [Ca_0.686(7)Sr_0.314(7)]. The chemical composition of veatchite from five localities in Russia (Nepskoe), Kazakhstan (Shoktybay and Chelkar in the North Caspian Region), and the USA (Tick Canyon and Billie Mine in California) was studied, and it is shown to exist in nature as a continuous, almost complete isomorphous series which extends from Ca-free veatchite, Sr₂B₁₁O₁₆(OH)₅·H₂O, to calcioveatchite with the composition Sr_1.14Ca_0.87B_10.99O₁₆(OH)₅·H₂O. Full article

Intensive aquaculture of grass carp often leads to decreased immunity and increased disease prevalence, resulting in economic losses. Improving grass carp immunity is therefore a critical strategy for addressing these challenges. Akirin reportedly participates in myogenesis, growth, and immune responses. However, its role in grass carp remains unclear. Herein, we isolated akirins from the spleen of grass carp and analyzed their tissue-specific expression. Akirin expression was detected following treatment with poly (I:C), LPS, and Aeromonas hydrophila (A. hydrophila). The immunological function of the akirin protein was evaluated in head kidney leukocytes (HKLs). The results revealed that the coding sequence (CDS) of akirin1 is 570 bp, encoding 189 amino acids. There was one predicted nuclear localization signal (NLS) and two predicted α- helix domains. The CDS of akirin2 is 558 bp, encoding 185 amino acids. There were two predicted NLSs and two predicted α-helix domains. Tissue-specific expression analysis showed that akirins are widely detected in grass carp tissues. akirin1 was highly detected in the brain, kidneys, heart, spleen, and gonads, while akirin2 was highly detected in the brain, liver, gonads, kidneys, spleen, and heart. The mRNA levels of akirins were promoted after treatment with poly (I:C), LPS, and A. hydrophila. Recombinant akirin proteins were produced in Escherichia coli (E. coli). il-1β, ifnγ, il-6, tnfα, il-4, iκbα, and nfκb were markedly increased in grass carp HKLs by treatment with the akirin protein. These results suggest that akirins play a role in the immunological regulation of grass carp. Full article

This study aimed to investigate the knowledge of patients with hypertension about their condition, adherence to antihypertensive medication, and the factors influencing it. A cross-sectional study was conducted in two cardiology outpatient clinics of two tertiary hospitals, in Greece. The study included 188 patients diagnosed with hypertension. The patients’ knowledge about their disease and adherence to medication were assessed by using the HK-LS and A-14 scales, respectively. Patients had sufficient knowledge levels about their disease, but significantly low levels of adherence to medication. Patients with higher knowledge levels were more adherent to medications [r(188) = 0.885, p < 0.001]. By using multivariate analysis, higher age (p = 0.018), residence in a more populous area (p = 0.041), more years with the disease (p = 0.012), and a lower number of medications (p = 0.03) were associated with higher levels of knowledge. Conversely, younger age (p = 0.036), lower educational levels (p = 0.048), fewer years with the disease (p = 0.001), and a higher number of medications (p = 0.003) were associated with lower adherence to medication. The Greek patients’ hypertension knowledge was sufficient; however, adherence to medication was significantly low. Healthcare managers could utilize our findings to design targeted interventions for improving adherence to medication for these patients. Full article

Aging is not only a key internal cause of age-related diseases in humans but also poses a threat to the productivity of farm animals with longer breeding cycles, such as laying chickens. Various measures were taken to prolong the laying period by reducing oxidative stress to improve poultry ovarian functions. Within the mitochondria, SIRT3, a member of the Sirtuin family, plays an important role in post-translational modifications and the regulation of protein activities involved in energy metabolism and oxidative response. This study aimed to investigate the alleviating effect of a bioactive lignan Honokiol (HKL) on oxidative stress in aging chicken ovaries in order to retard decline in egg production. The results showed that HKL treatment restored the abnormal balance between cell proliferation and apoptosis, and it enhanced the antioxidant capacity of the H₂O₂-induced small white follicles (SWFs) by activating the SIRT3/AMPK pathway. Moreover, HKL significantly increased total egg production, the number of yellow follicles, and the mRNA expression of yolk synthesis and deposition-related genes, serum estrogen, and antioxidant levels. These findings suggest that HKL holds promise in enhancing the egg productivity of aging laying chickens by promoting yolk deposition and reducing ovarian oxidative stress. Full article

Dendrobium officinale Kimura et Migo (D. officinale) is one of the most important traditional Chinese medicinal herbs, celebrated for its abundant bioactive ingredients. This study demonstrated that the diurnal temperature difference (DIF) (T1: 13/13 °C, T2: 25/13 °C, and T3: 25/25 °C) was more favorable for high chlorophyll, increased polysaccharide, and total flavonoid contents compared to constant temperature treatments in D. officinale PLBs. The transcriptome analysis revealed 4251, 4404, and 4536 differentially expressed genes (DEGs) in three different comparisons (A: 25/13 °C vs. 13/13 °C, B: 13/13 °C vs. 25/25 °C, and C: 25/13 °C vs. 25/25 °C, respectively). The corresponding up-/down-regulated DEGs were 1562/2689, 2825/1579, and 2310/2226, respectively. GO and KEGG enrichment analyses of DEGs showed that the pathways of biosynthesis of secondary metabolites, carotenoid biosynthesis, and flavonoid biosynthesis were enriched in the top 20; further analysis of the sugar- and flavonol-metabolism pathways in D. officinale PLBs revealed that the DIF led to a differential gene expression in the enzymes linked to sugar metabolism, as well as to flavonol metabolism. Certain key metabolic genes related to ingredient accumulation were identified, including those involved in polysaccharide metabolism (SUS, SUT, HKL1, HGL, AMY1, and SS3) and flavonol (UGT73C and UGT73D) metabolism. Therefore, these findings indicated that these genes may play an important role in the regulatory network of the DIF in the functional metabolites of D. officinale PLBs. In a MapMan annotation of abiotic stress pathways, the DEGs with significant changes in their expression levels were mainly concentrated in the heat-stress pathways, including heat-shock proteins (HSPs) and heat-shock transcription factors (HSFs). In particular, the expression levels of HSP18.2, HSP70, and HSF1 were significantly increased under DIF treatment, which suggested that HSF1, HSP70 and HSP18.2 may respond to the DIF. In addition, they can be used as candidate genes to study the effect of the DIF on the PLBs of D. officinale. The results of our qPCR analysis are consistent with those of the transcriptome-expression analysis, indicating the reliability of the sequencing. The results of this study revealed the transcriptome mechanism of the DIF on the accumulation of the functional metabolic components of D. officinale. Furthermore, they also provide an important theoretical basis for improving the quality of D. officinale via the DIF in production. Full article

For the duplex stainless steel X2CrNiMoN22-5-3, phase-specific strain pole figures (strain PFs) for the phases ferrite (bcc) and austenite (fcc) were analysed under uniaxial tensile loading for various loading states in purely elastic and elasto-plastic regimes. Experimentally, strain PFs were determined by means of in situ neutron diffraction strain measurements under defined uniaxial loading. These experimental results were compared with strain PFs calculated using elasto-plastic self-consistent (EPSC) modelling. The comparison was performed for two different {hkl} planes per phase. While classic load stress and load partitioning analyses for multi-phase materials are often limited to the load direction and a selected direction transverse to it, the results illustrate the added value of determining a strain PF, especially when a phase-specific texture is present. The comparison with experimental data shows how well the load partitioning behaviour can be predicted using common EPSC models, using the example of a duplex stainless steel. The EPSC model used was validated with the software ISODEC in its elastic range. Based on the results of the EPSC model, and taking into account the local phase-specific crystallographic texture, a prediction can be made as to what extent intergranular stresses and phase-specific textures could affect the results of a (residual) stress analysis by means of the diffraction method. This makes it possible to assess whether, for technical applications, meaningful residual stress results can be expected in certain component directions. Full article

Interleukin-15 (IL15) is a proinflammatory cytokine that could induce the production of inflammatory cytokines. In this study, the α chain of the IL15 receptor of Epinephelus coioides (Ec-IL15Rα), a natural regulator of IL15, was identified, and immune response functions of fish were determined and characterized. Ec-IL15Rα contains a 720 bp open reading frame that encodes 239 amino acids, including four typical conserved cysteine residues with a highly conserved sushi domain. Ec-IL15Rα is closely related to Epinephelus lanceolatus and is the most clustered with teleost. Subcellular localization studies showed that Ec-IL15Rα was situated in the cytoplasm and cell membrane. Ec-IL15Rα was detected in 11 tissues, with the highest expression in the liver and blood. Meanwhile, the Ec-IL15Rα transcriptional levels substantially increased in nine tissues after Vibrio harveyi infection. Ec-IL15Rα was significantly up-regulated in HKLs by ConA, PHA, LPS and poly I:C stimulation. In vitro analysis, the recombinant protein of rEc-IL15Rα stimulates HKL proliferation and IL1R, IL6R, IL10, and IL16 expression. Challenge experiments revealed that IL15Rα protein showed an increase of 6.67–10% survival protection rate after V. harveyi infection. This study provides a better understanding of the immune protection of IL15Rα in vertebrate fish. Full article

Tensile deformation in situ neutron diffraction of an extruded AZ31 alloy was performed to validate conventional procedures and to develop new procedures for stress evaluation from lattice strains by diffraction measurements of HCP-structured magnesium alloys. Increases in the lattice strains with respect to the applied true stress after yielding largely vary among [hk.l] grains. Some [hk.l] grains have little or no increase in lattice strain, making it difficult to use the conventional procedures to determine the average phase strain by using lattice constants or by averaging several lattice strains. The newly proposed procedure of stress evaluation from the lattice strains shows very high accuracy and reliability by weighting the volume fraction of [hk.l] grains and evaluating them in many [hk.l] orientations in addition to multiplication by the diffraction elastic constant. When multiple hk.l peaks cannot be obtained simultaneously, we recommend to use the 12.1 peak for stress evaluation. The lattice strain value evaluated from the 12.1 peak shows a good linear relationship with the applied true stress for the whole deformation region. Full article

The casting of metal alloys followed by hot forging is a widely used manufacturing technology to produce a homogeneous microstructure. The combination of mechanical and thermal energy envisages the microstructural properties of metal alloys. In the present investigation, a metal alloy of composition 0.05C-1.52Cu-1.51Mn (in weight %) was cast in an induction furnace using a zirconia crucible. The melt pool was monitored using optical emission spectroscopy (OES) to maintain the desired composition. The as-cast block was then subjected to forging under a pneumatic hammer of 0.5 t capacity so that any casting defects were eliminated. The as-cast block was reheated to a temperature of 1050 °C and held at that temperature for 6 h to homogenize, followed by hammering with a 50% strain using a pneumatic hammer. The microhardness was calculated using a Vickers microhardness testing apparatus. The microstructure characterization of the processed alloy was carried out using an optical microscope, electron backscattered diffraction (EBSD), energy-dispersive X-ray spectroscopy (EDXA), and a transmission electron microscope (TEM). The sample for optical microscopy was cut using a diamond cutter grinding machine and surface polishing was carried out using emery paper. Further, mechanical polishing was performed to prepare the samples for EBSD using a TEGRAPOL polishing machine. The EBSD apparatus was operated at a 20 kV accelerating voltage, 25 mm from the gun, and with a 60 µ aperture size. HKL Technology Channel 5 Software was used for the post-processing of EBSD maps. The procedure of standard polishing for OES and TEM sample preparation was followed. Recrystallization envisages equiaxed grain formation in hot forging; hence, the strain-free grains were observed in the strained matrix. The lower distribution of recrystallized grains indicated that the driving force for recrystallization was not abundant enough to generate a fully recrystallized microstructure. The fractional distribution of the misorientation angle between 15 and 60° confirms the formation of grain boundaries (having a misorientation angle greater than 15°) and dislocations/subgrain/substructures (having a misorientation angle less than 15°). The fraction of misorientation angle distribution was higher between the angles 0.5 and 6.5°; afterwards, it decreased for higher angles. The substructure was observed in the vicinity of grain boundaries. The softening process released certain strains, but still, the dislocation was observed to be deposited mostly in the vicinity of grain boundaries and at the grain interior. The fine precipitates of the microalloying element copper were observed in the range of size in nanometers. However, the densities of these precipitates were limited and most of these precipitates were deposited at the grain interior. The microhardness of 210.8 Hv and mean subgrain size of 1.61 µ were observed the enhanced microhardness was due to the limited recrystallized grains and accumulation of dislocations/subgrain/substructures. Full article