Search Results (18)

The northern part of the Naomugeng Sag in the Erlian Basin shows favorable sandstone-type uranium mineralization in the lower member of the Saihan Formation. The sandstone thickness ranges from 39.67 to 140.36 m, with an average sand content ratio of 76.33%, indicating broad prospecting potential. This study focuses on samples from uranium ore holes and uranium-mineralized holes in the area, conducting grain-size analysis of uranium-bearing sandstones, heavy mineral assemblage analysis, and detrital zircon U-Pb dating to systematically investigate provenance characteristics. The results indicate that the uranium-bearing sandstones in the lower member of the Saihan Formation were primarily transported by rolling and suspension, characteristic of braided river channel deposits. The heavy mineral assemblage is dominated by zircon + limonite + garnet + ilmenite, suggesting that the sedimentary provenance is mainly composed of intermediate-acid magmatic rocks with minor metamorphic components. Detrital zircon U-Pb ages are mainly concentrated in the ranges of 294–217 Ma (Early Permian to Late Triassic), 146–112 Ma (Middle Jurassic to Early Cretaceous), 434–304 Ma (Late Carboniferous to Early Permian), and 495–445 Ma (Middle–Late Ordovician to Early Silurian). Combined with comparisons of the ages of surrounding rock masses, the provenance of the uranium-bearing sandstones is mainly derived from intermediate-acid granites of the Early Permian–Late Triassic and Middle Jurassic–Early Cretaceous periods in the southern part of the Sonid Uplift, with minor contributions from metamorphic and volcanic rock fragments. The average zircon uranium content is 520.53 ppm, with a Th/U ratio of 0.73, indicating that the provenance not only supplied detrital materials but also provided uranium-rich rock bodies that contributed essential metallogenic materials for uranium mineralization. This study offers critical insights for regional prospecting and exploration deployment. Full article

The Erlian Basin, an important research area for sandstone-type uranium deposit exploration in China, is affected by overburden layers, resulting in indistinct characteristics of uranium anomalies in airborne gamma-ray spectrometry (AGS). To harness the potential of AGS, it is imperative to develop effective verification methods that can identify the spatial relationship between weak uranium anomalies and deep uranium-rich geological bodies. This study presents a comprehensive investigation of geophysical and geochemical measurements conducted in four distinct areas. There is a significant positive correlation between the ground gamma spectrometry equivalent uranium (eU_GGS) content, soil radon concentration (C_Rn), geoelectrochemical uranium (U_GEC), and metal activity state uranium (U_MAS) content directly above and at the edges of uranium-rich geological bodies. When the buried depth of the uranium-rich geological body exceeds 100 m, the eU_GGS content above these deep uranium bodies increases by (0.4–1.2) × 10⁻⁶ g/g compared to background areas, while the C_Rn levels at the edges of these bodies increase by more than 5000 Bq/m³, which is 3–5 times higher than the regional average. Meanwhile, the U_GEC and U_MAS contents show sawtooth-like uranium peak anomalies on their profiles, and their peak-to-background ratio is greater than 5. The verification methods and corresponding interpretation indicators, namely GGS, C_Rn, GEC and MAS measurements, can quickly reveal the spatial relationship and provide a reliable basis for concealed uranium deposit exploration. Full article

The Baorao Trough of the Jiergalangtu Sag, located in the central Erlian Basin, is rich in petroleum resources. However, due to a lack of systematic geochemical characterization and comparative studies with other source rocks, the hydrocarbon generation potential of its Jurassic strata remains unclear. In this study, 125 samples from the Baorao Trough were analyzed to evaluate their hydrocarbon generation potential, identify organic matter sources and depositional environments, and characterize hydrocarbon generation and expulsion. Results show that source rocks from the first member of the Tengge’er (K₁bt₁) Formation and the Aershan (K₁ba) Formation have high organic matter content, favorable kerogen types, and have reached low to medium maturity. In contrast, Jurassic source rocks are predominantly Type III kerogen and highly mature. K₁bt₁ was deposited in a weakly oxidizing to reducing, brackish environment, while K₁ba formed under weakly reducing, saline conditions. Jurassic source rocks also developed in weakly reducing, brackish to saline settings. Notably, saline and reducing environments promote the development of high-quality source rocks. The lower total organic carbon (TOC) threshold for effective source rocks in the study area is 0.8%, and the hydrocarbon expulsion threshold for vitrinite reflectance ratio (R_o) is approximately 0.8%. Accordingly, K₁bt₁ and K₁ba have undergone partial hydrocarbon expulsion but remain within the oil-generating window, indicating strong oil-generating potential. Jurassic source rocks likely experienced early thermal cracking of Type III kerogen, with generated oil migrating or escaping during early geological activity. However, some gas-generating potential remains. These findings provide significant evidence for assessing resource potential, predicting the distribution of high-quality source rocks and favorable exploration areas. Full article

This study focuses on the genesis mechanism of thermal anomalies in the southwestern part of the Anan Depression in the Erlian Basin. Based on magnetotelluric 3D inversion data, a high-resolution electrical resistivity structure model was constructed, revealing the spatial configuration of deep heat sources and thermal pathways. The main conclusions are as follows: (1) Magnetotelluric 3D imaging reveals an elliptical low-resistivity anomaly (Anomaly C: 20 km × 16 km × 5 km, 0–5 Ωm) at depths of ~10–15 km. This anomaly is interpreted as a hypersaline fluid (approximately 400 °C, ~1.5% volume fraction, 3–5 wt.% NaCl), acting as the primary heat source. (2) Upward migration along F1/F3 fault conduits (10–40 Ωm) establishes a continuous pathway to mid-depth reservoirs D1/D2 (~5 km, 5–10 Ωm) and shallow crust. An overlying high-resistivity caprock (40–100 Ωm) seals thermal energy, forming a convective “source-conduit-reservoir-cap” system. (3) Integrated seismic data reveal that heat from the Abaga volcanic melt supplements Anomaly C via conduction through these conduits, combining with mantle-derived heat to form a composite source. This research delineates the interacting genesis mechanism of “deep low-resistivity heat source—medium-low resistivity fault conduit—shallow low-resistivity reservoir—relatively high-resistivity cap rock” in the southwestern A’nan Sag, providing a scientific basis for optimizing geothermal exploration targets and assessing resource potential. Full article

This study analyzes the lacustrine hydrocarbon source rocks of the Lower Cretaceous in the Erdengsumu sag of the Erlian Basin, evaluating their characteristics and identifying areas with oil resource potential, while also investigating the ancient lake environment, material source input, and controlling factors, ultimately developing a sedimentary model for lacustrine hydrocarbon source rocks. The findings suggest the following: (1) The lower Tengger Member (K₁bt₁) and the Aershan Formation (K₁ba) are the primary oil-producing strata, with an effective hydrocarbon source rock exhibiting a lower limit of total organic carbon (TOC) at 0.95%. The Ro value typically remains below 0.8%, indicating that high-maturity oil production has not yet been attained. (2) The oil generation threshold depths for the Dalestai and Sayinhutuge sub-sags are 1500 m and 1214 m, respectively. The thickness of the effective hydrocarbon source rock surpasses 200 m, covering areas of 42.48 km² and 88.71 km², respectively. The cumulative hydrocarbon generation intensity of wells Y1 and Y2 is 486 × 10⁴ t/km² and 26 × 10⁴ t/km², respectively, suggesting that the Dalestai sub-sag possesses considerable petroleum potential. The Aershan Formation in the Chagantala sub-sag has a maximum burial depth of merely 1800 m, insufficient to attain the oil generation threshold depth. (3) The research area’s productive hydrocarbon source rocks consist of organic matter types I and II₁. The Pr/Ph range is extensive (0.33–2.07), signifying a reducing to slightly oxidizing sedimentary environment. This aligns with the attributes of small fault lake basins, characterized by shallow water and robust hydrodynamics. (4) The low ratio of ∑nC₂₁₋/∑nC₂₂₊ (0.36–0.81), high CPI values (>1.49), and high C₂₉ sterane concentration suggest a substantial terrestrial contribution, with negligible input from aquatic algae–bacterial organic matter. Moreover, as sedimentation duration extends, the contribution from higher plants progressively increases. (5) The ratio of the width of the deep depression zone to the width of the depression in the Erdengsumu sag is less than 0.25. The boundary fault scale is small, its activity is low, and there is not much input from the ground. Most of the source rocks are in the reducing sedimentary environment of the near-lying gently sloping zone. Full article

The characteristics of interlayer oxidation zones constrain sandstone-type uranium mineralization. This study conducted a quantitative characterization of the interlayer oxidation zones in the uranium-bearing reservoir of the Saihan Formation in the central Wulanchabu Subbasin of the Erlian Basin through sand dispersion system mapping, the analysis of sedimentary debris components, environmentally sensitive parameters, and elemental geochemical characteristics. The formation mechanisms and controlling factors of interlayer oxidation zones were investigated, along with uranium mineralization patterns. Research findings reveal that the sandbodies in the study area primarily consist of red sandstone, yellow sandstone, gray ore-bearing sandstone, and primary gray sandstone, representing strong oxidation zones, weak oxidation zones, transitional zones, and reduction zones, respectively. Although the mineral debris content shows minimal variation among different zones, feldspar dissolution is more prevalent in oxidized zones. During interlayer oxidation, environmentally sensitive parameters exhibit an ascending trend from strong oxidation zones through weak oxidation zones and reduction zones to mineralized transitional zones. Four transition metal elements (Co, Ni, Zn, and Mo) demonstrate enrichment in mineralized transitional zones. The development of interlayer oxidation zones is directly controlled by reservoir heterogeneity and sedimentary environments. Oxidation subzones primarily occur in sandbodies with moderate thickness (40–80 m), sand content ratios of 40%–80%, and 2–10 or 10–18 mudstone barriers (approximately 20 m thick), mainly in braided river channels and channel margin deposits. Reduction zones develop in thicker sandbodies (~100 m) with higher sand contents (~80%), fewer mudstone barriers (2–8 layers), greater thickness (40–80 m), and predominantly channel margin deposits. Transitional zones mainly occur in braided distributary channels and floodplain deposits. When oxygen-bearing uranium fluids infiltrate reservoirs, oxygen reacts with reductants like organic matter, whereFe²⁺ oxidizes to Fe³⁺, S²⁻ reacts with oxygen, and U⁴⁺ oxidizes to U⁶⁺, migrating as uranyl complexes. As oxygen depletes, Fe³⁺ reduces to Fe²⁺, combining with S²⁻ to form pyrite between mineral grains. Uranyl complexes reduce to precipitate as pitchblende, while some U⁴⁺ reacts with SiO₄⁴⁻, forming coffinite, occurring as colloids around quartz debris or pyrite. The concurrent enrichment of certain transition metal elements occurs during this process. Full article

In recent years, the exploration of the Baibei Sag, located in the west of the Erlian Basin, has remained relatively underdeveloped. The Lower Cretaceous of the Baibei Sag hosts multiple tight sandstone reservoirs; however, research on the macro- and micro-characteristics, as well as the controlling factors of these reservoirs, is relatively limited. This study selected 105 Lower Cretaceous sandstone samples from the Baibei Sag for core observation, casting thin sections, scanning electron microscopy, X-ray diffraction, and high-pressure mercury intrusion analysis. The reservoir’s physical properties, pore throat structure, and diagenesis process were studied. The results indicate that the reservoir lithology is mainly composed of feldspar lithic sandstone, with an average composition of 44.3% lithic, 34.6% quartz, and 21.2% feldspar. The clay minerals in the interstitial material are primarily illite (69.3%) and illite–smectite mixed layers (12.7%), with smaller amounts of chlorite (10.9%) and kaolinite (7.2%), while smectite content is very low. The physical property analysis results indicate that the average effective porosity of the Tengger Formation sandstone is 3.3%. The average permeability is 0.01 × 10⁻³ μm². The average effective porosity of the Aershan Formation sandstone is 0.86%, and the average permeability is 0.05 × 10⁻³ μm². The Tengger Formation and Aershan Formation are both tight sandstone reservoirs. The analysis of pore throat structure shows that the reservoir space is mainly composed of dissolution pores. Three types of pore throat structures were identified, and corresponding pore models were established. Based on burial history and organic matter evolution characteristics, this study establishes a diagenetic evolution sequence of the Lower Cretaceous sandstone reservoir. Analysis suggests that the pore throat structure of different reservoir types is mainly controlled by material composition. In the process of diagenetic evolution, the Tengger Formation and Aershan Formation are in the Middle diagenetic stage A. Compaction and cementation are the main reasons for low porosity, while the dissolution improves reservoir performance. The intergranular and intragranular dissolution pores formed by dissolution are the main storage spaces of the reservoir. The early tectonic fractures are filled with calcite, and the residual small-scale fractures play a role in improving permeability. Full article

The Luhai uranium deposit is a large-scale uranium deposit newly discovered in recent years through comprehensive prospecting methods. It is located in the Basaiqi Paleochannel Uranium metallogenic belt of the Erlian Basin and is characterized by its shallow burial and large scale. This paper provides new data on the genetic processes of sandstone-type uranium mineralization through sedimentological and geochemical environmental indicators (such as Fe³⁺/Fe²⁺, organic carbon, total sulfur, etc.), analysis of C-O isotopes of carbonate cements and H-O isotopes of groundwater, and geochemical and mineralogical studies of uranium minerals, iron–titanium oxides (involving backscatter analysis, micro-area chemical composition determination, and elemental surface scanning), and organic matter. Sedimentological analysis shows that the ore- bearing layer in the upper member of the Saihan Formation developed a braided channel within floodplain subfacies, which control the distribution of uranium ore bodies. Uranium mineralogical observations, geochemical environmental indicators, and organic geochemical data indicate that the main reducing agents related to mineralization are pyrite, terrestrial plants, and deep-sourced oil and gas. The δD values of groundwater in the ore-bearing layer range from −95.34‰ to −90.68‰, and the δ¹⁸O values range from −12.24‰ to −11.87‰. For calcite cements, the δ¹⁸O_V-PDB values range from −24‰ to −11.5‰, and the δ¹⁸_OV-SMOW values range from 6.2‰ to 19‰. It was determined that the ore-forming fluid is mainly surface fresh water that entered the strata during the tectonic uplift stage, with local mixing of deep-sourced brine. Based on these data, the main modes of uranium mineralization in the paleochannel were obtained as follows: (1) Redox mineralization occurs due to the reducing medium within the sand body itself and the reduction caused by deep- sourced oil and gas generated from the Tengge’er and Arshan Formations. (2) Mineralization is achieved through the mixing of fluids from different sources. Furthermore, a genetic model related to uranium mineralization in the paleochannels of the Luhai area has been established: favorable uranium reservoirs were formed during the sedimentary period, and during the post-sedimentary stage, reverse structures promoted redox reactions and fluid-mixing-induced mineralization. The research findings can provide guidance for the exploration of paleochannel sandstone-type uranium deposits in other areas of the Erlian Basin. Full article

Debris flow in the upper Yellow River is very developed and is generally characterized by wide distribution with large numbers and a high frequency of occurrence. This paper analyses the distribution characteristics, material composition, and formation causes of the Erlian debris flow fan in the eastern part of the Guide Basin and discusses the relationship between debris flow fan and river evolution. Results show that: (1) At least 66 debris flow gullies and 20 large debris flow accumulation fans have been developed on both sides of the Yellow River in the eastern Guide Basin. (2) In the Erlian Village area, the Yellow River channel has experienced the accumulation, erosion, destruction, and accumulation process of debris flow fans in 16 kaB.P., 16 ka B.P.–8 ka B.P., and 8 kaB.P., respectively, the late-accumulation fan has been continuously extruding the Yellow River channel since 8 kaB.P., and the Yellow River channel has been shifted to the south by at least 1.25 km during the period of 8 ka. (3) Five accumulation periods for the Late Mudslide Fan were identified by classifying the 16 kaB.P. and 8 kaB.P. early and late mudslide fans. This study can provide theoretical and technical support for preventing debris flow disasters in the upper reaches of the Yellow River and has certain reference and reference values. Full article

As a strategic mineral and energy resource, the enrichment and metallogenic mechanism of sandstone-hosted uranium deposits are highly dependent on hydrogeological conditions. However, the relationship between sandstone uranium mineralization and hydrogeological conditions has not received sufficient attention yet. The pumping test, hydrogeological parameters and hydrochemical characteristics were employed to analyze the change characteristics of hydrogeological conditions and evaluate the suitability of in situ leaching (ISL). The results showed that the study area in the Inner Mongolia Autonomous Region could be divided into two groundwater subsystems, namely Quanzha-Engeriyin and Luhai-Zhendai. The latter with relatively high water richness is confined and a main ore-bearing aquifer, which consists of four orebodies. The well discharge (Q) and hydraulic conductivity (K) of Orebody II ranged from 98.40 to 867.36 m³/d and 0.25 to 5.64 m/d, respectively, indicating the aquifer is suitable for the migration, enrichment and mineralization of uranium due to relatively high permeability and fast flow rate. The water storage of Orebodies III-IV gradually deteriorated from east to west in a stepped pattern. And the highest values of Q and K in Orebodies III-IV decreased from 1200 m³/d to 120 m³/d and 1.75 m/d to 0.035 m/d, respectively, suggesting these were conducive to a reduction in and accumulation of uranium under poor hydrodynamic conditions. Additionally, the study area would be defined as three grades, including favorable, relatively favorable and unfavorable areas of ISL according to a comprehensive evaluation. This study provided a scientific basis for evaluating the possibility of in situ leaching for sandstone-hosted uranium deposit. Full article

Sandstone-hosted uranium deposits are indeed significant sources of uranium resources globally. They are typically found in sedimentary basins and have been extensively explored and exploited in various countries. They play a significant role in meeting global uranium demand and are considered important resources for nuclear energy production. Erlian Basin, as one of the sedimentary basins in northern China, is known for its uranium mineralization hosted within sandstone formations. In this research, machine learning (ML) methodology was applied to mineral prospectivity mapping (MPM) of the metallogenic zone in the Manite depression of the Erlian Basin. An ML model of 92% accuracy was implemented with the random forest algorithm. Additionally, the confusion matrix and receiver operating characteristic curve were used as model evaluation indicators. Furthermore, the model explainability research with post hoc interpretability algorithms bridged the gap between complex opaque (black-box) models and geological cognition, enabling the effective and responsible use of AI technologies. The MPM results shown in QGIS provided vivid geological insights for ML-based metallogenic prediction. With the favorable prospective targets delineated, geologists can make decisions for further uranium exploration. Full article

In order to identify the distribution pattern of radionuclides in the surface soil in the area of a sandstone-type uranium deposit, and to explore its spatial relationship with the location of the orebody, soil radon measurements and ground gamma-ray spectroscopy were carried out in the Barun study area, and soil properties were analyzed. The results show that the soil radon concentrations exhibited a bimodal feature, while the uranium content showed a decreasing trend along the tendency direction of the orebody. In the ground projection area of the orebody, radon concentration showed a positive correlation with uranium content, with both showing relatively low values. Combined with the results of field geological observation and soil property analysis, it is believed that the relatively low radon concentration and uranium content above the orebody is related to the soil being mainly sandy soil. Relatively high uranium values are distributed within approximately 1.5 km north of the northern boundary of the orebody and near the southern boundary of the orebody. High-value radon anomalies occur within about 2 km north of the northern boundary of the orebody and within about 1.3 km south of the southern boundary of the orebody. Full article

Since the 1990s, sandstone-type uranium in the northern basin of China has become the main target for mining. Uranium mining can cause a series of impacts on the environment. A conceptual model of the geo-environment for sandstone-type uranium in northern China was described, which covers the changes in the geo-environmental characteristics in the natural state, in the mining process, during decommissioning and after treatment. Sandstone-type uranium is mainly distributed in the Songliao, Erlian, Ordos, Turpan–Hami and Ili Basins, which have arid climates and poor stratum permeability. Pitchblende is the main uranium-bearing mineral and is associated with iron, copper, coal, organic matter and other minerals. The mineral often has a low ore grade (0.01–1.0%) and high carbonate content (2–25%). Uranyl carbonate accounts for more than 90% of the total uranium in groundwater. The uranyl content is closely related to the TDS. The TDS of groundwater in the eastern and central ore belts is usually lower than 2 g/L, while in the western region, such as Xinjiang, it can exceed 10 g/L. In situ leaching (ISL) is the main mining method that results in groundwater pollution. Acid leaching leads to a pH decrease (<3), and heavy metals represented by U and Fe exceed the background values by hundreds of times, resulting in groundwater pollution. CO₂ leaching is more environmentally friendly, and the excess ions are usually Ca²⁺, Mg²⁺, NO₃⁻ and HCO₃⁻. Soil chemical anomalies originate mostly from wind erosion and precipitation leaching of decommissioned tailings. Uranium pollution is mainly concentrated within 20 cm of the surface, and the exceedance generally varies from two to 40 times. During ISL, a series of environmental measures will be taken to prevent pollution from being exposed to the surface. After treatment, the decommissioned uranium mines will likely have no impact on the surrounding environment. In the future, the protection of groundwater should be strengthened during production, and remediation methods based on electrokinetic, microbial and permeable reactive barrier (PRB) technology should be further researched. Full article

Fan deltas of the Lower Cretaceous area in Saihantala sag, Erlian Basin have been identified as major petroleum exploration opportunities. The sedimentary evolution is, however, still debatable, which hinders insights into its controlling factors. This research employed new core observations, thin section observations, and grain size analyses of 28 wells in the Saidong sub-sag, together with numerous borehole and seismic data points, to explore lithofacies types, subfacies, and microfacies characteristics, thus leading to a further investigation of the sedimentary facies evolution of the sag and its controlling factors. The findings showed there are 3 categories, 12 sub-categories, and 20 fine lithofacies types in the Saidong sub-sag. Additionally, various sand-conglomerate lithofacies were characterized by lower composition and texture maturity. With dentate-shaped, box-bell-shaped, and other morphological well-logging responses, fan deltas were mostly developed in the A’ershan Formation and the Tengge’er Formation, which could be subdivided into three subfacies and eight microfacies. Given the sedimentary features and lithofacies characteristics of each microfacies, it can be determined that three main stages occurred in formations from the A’ershan to the Tengge’er: the water transgression, the water oscillation, and the water regression. Moreover, fan delta deposits were regulated primarily by semi-arid hygrothermal and semi-arid paleoclimate and paleotectonic factors. Full article

Dust storms are common in Mongolia and northern China, this is a serious threat to the ecological security and socioeconomic development of both countries and the surrounding areas. However, a complete quantitative study of the source area, affected area, and moving path of dust storm events (DSEs) in Mongolia and China is still lacking. In this study, we monitored and analyzed the spatiotemporal characteristics of the source area and affected areas of DSEs in Mongolia and China using the high-spatiotemporal-resolution images taken by the Himawari-8 satellite from March to June 2016–2020. In addition, we calculated the moving path of dusty weather using the HYSPLIT model. The results show that (1) temporality, a total of 605 DSEs occurred in the study area, with most of them occurring in April (232 DSEs), followed by May (173 DSEs). Spatially, the dust storm sources were concentrated in the arid inland areas such as the Taklimakan Desert (TK, 138 DSEs) and Badain Jaran Desert (BJ, 87 DSEs) in the western, and the Mongolian Gobi Desert (GD, 69 DSEs) in the central parts of the study area. (2) From the affected areas of the DSEs, about 60% of the DSEs in Mongolia started locally and then affected downwind China, as approximately 55% of the DSEs in the Inner Mongolia Desert Steppe and Hunshandake Sandy Land came from Mongolia. However, the DSEs in the TK located in the Tarim Basin of northwest China affected the entire study area, with only 31.3% belonging to the local dust. (3) From the moving path of the dusty weather, the dusty weather at the three meteorological stations (Dalanzadgad, Erlian, and Beijing), all located on the main transmission path of DSEs, was mainly transported from the windward area in the northwest, accounting for about 65.5% of the total path. This study provides a reliable scientific basis for disaster prevention and control, and has practical significance for protecting and improving human settlements. Full article