Search Results (1,254)

Food security is crucial for social stability and economic development. Ensuring food security in the arid region of Northwest China presents unique challenges due to limited water and soil resources. This study addresses these challenges by integrating a comprehensive water and soil resource matching assessment with grain production forecasting. Based on data from 2000 to 2020, this research projects the food security status to 2035 using the GM(1,1) model, incorporating a comprehensive index of soil and water resource matching and regression analysis to inform production forecasts. Key assumptions include continued historical trends in population growth, urbanization, and dietary shifts towards an increased animal protein consumption. The findings revealed a consistent upward trend in grain production from 2000 to 2020, with an average annual growth rate of 3.5%. Corn and wheat emerged as the dominant grain crops. Certain provinces demonstrated comparative advantages for specific crops like rice and wheat. The most significant finding is that despite the projected growth in the total grain output by 2035 compared to 2020, the regional grain self-sufficiency rate is projected to range from 79.6% to 84.1%, falling below critical food security benchmarks set by the FAO and China. This projected shortfall carries significant implications, underscoring a serious challenge to regional food security and highlighting the region’s increasing vulnerability to external food supply fluctuations. The findings strongly signal that current trends are insufficient and necessitate urgent and proactive policy interventions. To address this, practical policy recommendations include promoting water-saving technologies, enhancing regional cooperation, and strategically utilizing the international grain trade to ensure regional food security. Full article

Achieving sustainable development goals remains a core issue in global development. In response, China has proposed the development of new quality productive forces (NQPFs) through innovative thinking, emphasizing that fostering NQPFs is both an intrinsic requirement and a pivotal focus for advancing high-quality development. Concurrently, the intelligent transformation of the manufacturing sector serves as a critical direction for China’s economic restructuring and upgrading. This paper places “new quality productive forces” and “intelligent transformation of manufacturing” within the same analytical framework. Starting from the logical chain of “new quality productive forces—three major mechanisms—intelligent transformation of manufacturing,” it concretizes the value implications of new quality productive forces into a systematic conceptual framework driven by the synergistic interaction of three major mechanisms: the mechanism of revolutionary technological breakthroughs, the mechanism of innovative allocation of production factors, and the mechanism of deep industrial transformation and upgrading. This study constructs a “3322” evaluation index system for NQPFs, based on three formative processes, three driving forces, two supporting systems, and two-dimensional characteristics. Simultaneously, it builds an evaluation index system for the intelligent transformation of manufacturing, encompassing intelligent technology, intelligent applications, and intelligent benefits. Using national time-series data from 2012 to 2023, this study assesses the development levels of both NQPFs and the intelligent transformation of manufacturing during this period. The study further analyzes the impact of NQPFs on the intelligent transformation of the manufacturing sector. The research results indicate the following: (1) NQPFs drive the intelligent transformation of the manufacturing industry through the three mechanisms of innovative allocation of production factors, revolutionary breakthroughs in technology, and deep transformation and upgrading of industries. (2) The development of NQPFs exhibits a slow upward trend; however, the outbreak of the pandemic and Sino-US trade frictions have caused significant disruptions to the development of new-type productive forces. (3) The level of intelligent manufacturing continues to improve; however, from 2020 to 2023, due to the impact of the COVID-19 pandemic and Sino-US trade conflicts, the level of intelligent benefits has slightly declined. (4) NQPFs exert a powerful driving force on the intelligent transformation of manufacturing, exerting a significant positive impact on intelligent technology, intelligent applications, and intelligent efficiency levels. Full article

Promoting the sustainable development of virtual water trade is of great significance to safeguarding China’s water resource security and balanced regional economic growth. This study analyzes the virtual water trade network among 31 Chinese provinces based on multi-regional input–output tables from 2012, 2015, and 2017, using total trade decomposition, social network analysis, and exponential random graph models. The key findings are as follows: (1) The total virtual water trade volume remains stable, with Xinjiang, Jiangsu, and Guangdong as the core regions, while remote areas such as Shaanxi and Gansu have lower trade volumes. The primary industry dominates, and it is driven by simple value chains. (2) Provinces such as Xinjiang, Heilongjiang, and Jiangsu form the network’s core. Network density and symmetry increased from 2012 to 2015 but declined slightly in 2017, with efficiency peaking and then dropping, and the clustering coefficient decreased annually. Four economic sectors exhibit distinct interactions: frequent two-way flows in Sector 1, significant inflows in Sector 2, prominent net spillovers in Sector 3, and key brokers in Sector 4. (3) The network evolved from a core-periphery structure with weak ties to a stable, heterogeneous, and resilient system. (4) Influencing factors, such asper capita water resources, economic development, and population, significantly impact trade. Similarities in economic levels, population, and water endowments promote trade, while spatial distance has a limited effect, with geographic proximity showing a significant negative impact on long-distance trade. Full article

Against the backdrop of rapid urbanization in western China, which has triggered remarkable land-use changes and habitat degradation, Chengdu, as a developed city in China, plays a demonstrative and leading role in the economic and social development of China during the transition period. Therefore, integrated modeling approaches are required to balance development and conservation. This study responds to this need by conducting a scenario-based assessment of urbanization-induced land-use changes and regional habitat quality dynamics in Chengdu (1990–2030), using the FLUS-InVEST model. By integrating remote sensing-derived land-use data from 1990, 1995, 2000, 2005, 2010, 2015, and 2020, we simulate future regional habitat quality under three policy scenarios: natural development, ecological priority, and cropland protection. Key findings include the following: (1) From 1990 to 2020, cropland decreased by 1917.78 km², while forestland and built-up areas increased by 509.91 km² and 1436.52 km², respectively. Under the 2030 natural development scenario, built-up expansion and cropland reduction are projected. Ecological priority policies would enhance forestland (+4.2%) but slightly reduce cropland. (2) Regional habitat quality declined overall (1990–2020), with the sharpest drop (ΔHQ = −0.063) occurring between 2000 and 2010 due to accelerated urbanization. (3) Scenario analysis reveals that the ecological priority strategy yields the highest regional habitat quality (HQ_mean = 0.499), while natural development results in the lowest (HQ_mean = 0.444). This study demonstrates how the FLUS-InVEST model can quantify the trade-offs between urbanization and regional habitat quality, offering a scientific framework for balancing development and ecological conservation in rapidly urbanizing regions. The findings highlight the effectiveness of ecological priority policies in mitigating habitat degradation, with implications for similar cities seeking sustainable land-use strategies that integrate farmland protection and forest restoration. Full article

This study examines the impact of free trade zone (FTZ) establishment on regional economic resilience (RER) in China, using provincial-level panel data spanning from 2010 to 2022 and a multi-period difference-in-differences (DID) approach. The empirical results indicate that FTZ implementation significantly enhances regional economic resilience by 3.46%, with the development of green finance acting as a key moderating mechanism that amplifies this positive effect. Heterogeneity analysis uncovers notable disparities across policy cohorts and geographical regions: the first wave of FTZs demonstrates the most pronounced resilience-enhancing impact, whereas later cohorts exhibit weaker or even adverse effects. Coastal regions experience substantial benefits from FTZ policies, in contrast to statistically insignificant outcomes observed in inland areas. These findings suggest that strategically expanding the FTZ network, when paired with tailored implementation mechanisms and the integration of green finance, could serve as a powerful policy tool for post-COVID economic recovery. Importantly, by strengthening economic resilience through institutional openness and green investment, this study offers valuable insights into balancing economic growth with environmental sustainability. It provides empirical evidence to support the optimization of FTZ spatial governance and institutional innovation pathways, thereby contributing to the pursuit of sustainable regional development. Full article

In order to fulfill the commitment to the “dual carbon goal” at an early date, China has implemented a series of carbon control policies. However, the actual impact of these policy combinations on green innovation in Chinese cities remains unknown. Taking the implementation of the low-carbon pilot policy (LCP) and the carbon emission trading pilot policy (CET) as the research opportunity, this paper uses panel data from 276 prefecture-level cities and a multiple-period difference-in-differences (DID) model to explore the impact of carbon control policy combination on green innovation in China and their mechanisms. The results indicate the following: A single LCP or CET can significantly boost green innovation. However, the impact of cross-tool carbon control policy combination on green innovation is notably greater than that of a single policy, with a trend of increasing effectiveness over time. Even after a series of robustness tests, this conclusion remains valid. Heterogeneity analysis shows that the promotion effect is more significant in the eastern region and high-level administrative cities. The policy combination incentivizes green innovation through fiscal technology expenditure and public environmental awareness, focusing more on fostering strategic green innovation. Consequently, the Chinese government should tailor policy combinations to specific contexts, expand their implementation judiciously, and consistently drive forward green innovation. Full article

This study focusses on the transmission of carbon pricing mechanisms in shaping trade dynamics between the Eurozone and key partners: the USA and China. Using Bayesian variable selection methods and a Time-Varying Structural Vector Autoregressions (TV-SVAR) model, the research identifies the key variables impacting EU carbon emissions over time. The results reveal that manufactured products from the US have a diminishing positive impact on EU carbon emissions, suggesting potential exemption from future regulations. In contrast, manufactured goods from the US and petroleum products from China are expected to increase emissions, indicating a need for stricter trade policies. These findings provide strategic insights for policymakers aiming to balance trade and environmental objectives. Full article

Economically, all countries seek sustained growth driven by domestic demand, investment, and exports; however, COVID-19 revealed the vulnerability of interconnected economic systems and a sharp contraction in global trade. The objective of this research is to analyze through an econometric model the effect of traditional exports on Peru’s economic growth during the 2012–2023 period. The study employed a quantitative approach with a non-experimental, longitudinal design, using quarterly data from the Central Reserve Bank of Peru and the National Bureau of Statistics of China, which were transformed into natural logarithms. Unit root tests, the ordinary least squares (OLS) method and a two-stage least squares (2SLS) model were applied to correct for endogeneity. The results show that mining accounts for 81.7% of total traditional exports from Peru. The model indicated that a 1% increase in traditional exports leads to a 0.29% increase in GDP, confirming a positive impact. However, the high dependence of the mining sector exposes the economy to external risks. Therefore, a productive diversification strategy, alongside the modernization of the mining sector, is recommended to strengthen Peru’s economic resilience in the face of global crises and external fluctuations. Full article

The sustainable development of higher education exhibits a strong and measurable association with the level of regional innovation capacity. Drawing on panel data covering 31 provincial-level administrative regions in China from 2010 to 2022, we construct evaluation frameworks for both higher education and regional innovation capacity using the entropy weight method. These are complemented by kernel density estimation, spatial autocorrelation analysis, Dagum Gini coefficient decomposition, and the Obstacle Degree Model. Together, these tools enable a comprehensive investigation into the spatiotemporal evolution and driving mechanisms of coupling coordination dynamics between the two systems. The results indicate the following: (1) Both higher education and regional innovation capacity indices exhibit steady growth, accompanied by a clear temporal gradient differentiation. (2) The coupling coordination degree shows an overall upward trend, with significant inter-regional disparities, notably “higher in the east and low in the west”. (3) The spatial distribution of the coupling coordination degree reveals positive spatial autocorrelation, with provinces exhibiting similar levels tending to form spatial clusters, most commonly of the low–low or high–high type. (4) The spatial heterogeneity is pronounced, with inter-regional differences driving overall imbalance. (5) Key obstacles hindering regional innovation include inadequate R&D investment, limited trade openness, and weak technological development. In higher education sectors, limitations stem from insufficient social service benefits and efficiency of flow. This study recommends promoting the synchronized advancement of higher education and regional innovation through region-specific development strategies, strengthening institutional infrastructure, and accurately identifying and addressing key barriers. These efforts are essential to fostering high-quality, coordinated regional development. Full article

This study focuses on the impact of China’s digital economy on sustainable modernization from 2011 to 2021, using provincial panel data for empirical analysis. By applying threshold and mediation models, we find that the digital economy promotes modernization through industrial upgrading (with a mediating effect of 38%) and trade openness (coefficient = 0.234). The research reveals “U-shaped” nonlinear threshold effects at specific levels of digital development (2.218), market efficiency (9.212), and technological progress (12.224). Eastern provinces benefit significantly (coefficient ranging from 0.12 to 0.15 ***), while western regions initially experience some inhibition (coefficient = −0.08 *). Industrial digitalization (coefficient = 0.13 ***) and innovation ecosystems (coefficient = 0.09 ***) play crucial roles in driving eco-efficiency and equity, in line with Sustainable Development Goals 9 and 13. Meanwhile, the impacts of infrastructure (coefficient = 0.07) and industrialization (coefficient = 0.085) are delayed. Economic modernization improves (coefficient = 0.37 ***), yet social modernization declines (coefficient = −0.12 *). This study not only enriches economic theory but also extends the environmental Kuznets curve to the digital economy domain. We propose tiered policy recommendations, including the construction of green digital infrastructure, carbon pricing, and rural digital transformation, which are applicable to China and offer valuable references for emerging economies aiming to achieve inclusive low-carbon growth in the digital era. Future research could further explore the differentiated mechanisms of various digital technologies in the modernization process across different regions and how to optimize policy combinations to better balance digital innovation with sustainable development goals. Full article

Tin is an indispensable metal for contemporary society owing to its extensive application. China is a major tin manufacturer and consumer worldwide. Nonetheless, the crucial characteristics of its tin metabolism remain limited. Therefore, a dynamic material flow analysis (MFA) from 2001 to 2022 was performed in this study to trace China’s tin flows and stocks. Findings show that China became a net tin exporter from a life cycle perspective, and annual tin consumption embodied in various final products varied between 49.3 kilo tons (Kt) in 2001 and 161.5 Kt in 2022, with home appliances and electronics being the dominant consumption sectors. A total of 913.3 Kt of tin became in-use stocks. In addition, the imported tin embodied in various final products varied between 13.9 Kt in 2001 and 21.6 Kt in 2022, with machinery being the dominant consumption sector. The exported tin embodied in various final products varied between 12.0 Kt in 2001 and 76.3 Kt in 2022, with machinery being the dominant consumption sector. Finally, this study proposes some suggestions, in view of the Chinese reality, like enhancing tin recycling, promoting tin geological prospecting, optimizing the structure of the tin trade, and promoting regional cooperation, to improve the supply security of tin resources. Full article

The intensifying global competition for cobalt resources and the increasing likelihood of trade decoupling and disruption are profoundly impacting the global energy transition. In a globalized trade environment, a decline in cobalt supply from exporting countries can spread through the trade network, negatively affecting demand countries. Quantitative analysis of the negative impacts of export supply declines in various countries can help identify early risks in the global supply chain, providing a scientific basis for energy security, industrial development, and policy responses. This study constructs a trade network using trade data on metal cobalt, cobalt powder, cobalt concentrate, and ore sand from the upstream (mining, selection, and smelting) stages of the cobalt industry chain across 155 countries and regions from 2000 to 2023. Based on this, an impact diffusion model is established, incorporating the trade volumes and production levels of cobalt resources in each country to measure their resilience to shocks and determine their direct or indirect dependencies. The study then simulates the impact on countries (regions) when each country’s supply is completely interrupted or reduced by 50%. The results show that: (1) The global cobalt trade network exhibits a ‘one superpower, multiple strong players’ characteristic. Congo (DRC) has a far greater destructive power than other countries, while South Africa, Zambia, Australia, Russia, and other countries have higher destructive power due to their strong storage and production capabilities, strong smelting capabilities, or as important trade transit countries. (2) The global cobalt trade network primarily consists of three major risk areas. The African continent, the Philippines and Indonesia in Southeast Asia, Australia in Oceania, and Russia, the United States, China, and the United Kingdom in Eurasia and North America form the primary risk zones for global cobalt trade. (3) When there is a complete disruption or a 50% reduction in export supply, China will suffer the greatest average demand loss, far exceeding the second-tier countries such as the United States, South Africa, and Zambia. In contrast, European countries and other regions worldwide will experience the smallest average demand loss. Full article

The effects of changes in China’s final demand structure on its forestry sector and associated supply chains have not been thoroughly examined. This study aims to provide a detailed analysis of the quantitative relationships and underlying mechanisms between these interactive changes. Using China’s 153-sector input–output tables from the National Bureau of Statistics and applying a Leontief-based input–output model, we conducted scenario simulations through three distinct schemes, generating both quantitative and qualitative results. Our findings indicate that (1) For China’s forestry sector and its entire value chain to thrive, policymakers should boost consumer demand. This can better stimulate the development of forestry and the “agriculture-forestry-animal husbandry-fishery services” sector and related service industries; (2) Increased investment demand effectively stimulates the development of tertiary industries and secondary industries within the forestry supply chain and boosts the demand and production of intermediate products; (3) Changes in net exports have a significant impact on forestry and the forestry industry chain. To reduce dependence on foreign timber resources, China should strategically expand commercial plantation development; (4) Regarding intermediate product production, investment has a more pronounced effect on increasing total volume compared to consumption. Additionally, the Sino–US tariff disputes negatively impact the forestry industries of both countries. China needs to accelerate import substitution strategies for timber products, adjust international trade markets, and expand domestic consumption and investment to ensure the healthy and stable development of its forestry sector. Full article

Aiming for convenience and the low cost of goods transfer between towns, this paper proposes a trade hub location and allocation method based on a novel artificial eagle-inspired optimization algorithm. Firstly, the trade hub location and allocation model is established, taking the total cost consisting of construction and transportation costs as the objective function. Then, to solve the nonlinear model, a novel artificial eagle optimization algorithm (AEOA) is proposed by simulating the collective migration behaviors of artificial eagles when facing a severe living environment. Three main strategies are designed to help the algorithm effectively explore the decision space: the situational awareness and analysis stage, the free exploration stage, and the flight formation integration stage. In the first stage, artificial eagles are endowed with intelligent thinking, thus generating new positions closer to the optimum by perceiving the current situation and updating their positions. In the free exploration stage, artificial eagles update their positions by drawing on the current optimal position, ensuring more suitable habitats can be found. Meanwhile, inspired by the consciousness of teamwork, a formation flying method based on distance information is introduced in the last stage to improve stability and success rate. Test results from the CEC2022 suite indicate that the AEOA can obtain better solutions for 11 functions out of all 12 functions compared with 8 other popular algorithms. Faster convergence speed and stronger stability of the AEOA are also proved by quantitative analysis. Finally, the trade hub location and allocation method is proposed by combining the optimization model and the AEOA. By solving two typical simulated cases, this method can select suitable hubs with lower construction costs and achieve reasonable allocation between hubs and the rest of the towns to reduce transportation costs. Thus, it is used to solve the trade hub location and allocation problem of Henan province in China to help the government make sound decisions. Full article

This study investigates how Chinese ownership in European ports affects trade flows between China and Eurozone countries, set against the backdrop of recent global economic disruptions that have emphasized the crucial role of maritime trade and port efficiency. An augmented gravity model was employed, using the Poisson pseudo-maximum likelihood (PPML), fixed effects (FE), and random effects (RE) estimators, to analyze trade data from 2001 to 2023. The analysis shows that, while conventional economic factors like GDP per capita and the Logistics Performance Index (LPI) consistently and significantly drive trade, Chinese port ownership surprisingly exhibits a negative or statistically insignificant impact on both Chinese exports to the EU and EU imports from China. This suggests that these acquisitions may not primarily boost overall bilateral trade but rather consolidate existing routes or serve broader strategic objectives, as evidenced by heterogeneous country-specific effects and phenomena like the “Rotterdam effect”. Ultimately, my findings underscore the paramount importance of logistical efficiency over ownership structure in facilitating trade. Full article