Search Results (74)

Pig somatic cell nuclear transfer (SCNT) has valuable applications in agriculture, biomedicine, and life sciences, yet low cloning efficiency remains a major constraint limiting its application. To systematically investigate factors related to the production efficiency of pig cloning, this study conducted a retrospective analysis of 367,701 SCNT embryos transferred into 2019 surrogate sows over five years, focusing on breeds of donor cells, the season of embryo transfers, and the number of embryos transferred per surrogate. Our data demonstrate that the genetic background of donor cells is a critical determinant. SCNT embryos generated by wild-type (WT) Pietrain and Duroc pigs yielded significantly higher cloning efficiencies compared to those from Large White and Yorkshire pigs. This breed-specific influence was also observed with genetically modified (GM) donor cells. Nevertheless, within the GM groups, GM-Duroc and GM-Yorkshire showed superior efficiency compared to GM-Large White and GM-Bama. Furthermore, Summer was identified as the least favorable season for embryo transfer, with significantly lower pregnancy rates, delivery rates, and cloning efficiency compared to the other seasons. Importantly, we established that transferring 100–150 embryos per recipient optimized cloning efficiency, significantly outperforming groups receiving higher embryo numbers without compromising pregnancy rates, delivery rates, or average litter sizes. Our findings provide valuable guidance for optimizing large-scale SCNT protocols in swine. Full article

Background: Giardia duodenalis is one of the most prevalent protozoan pathogens, commonly infecting a wide range of hosts including humans, livestock, companion animals, and wildlife globally. The Bamaxiang pig (Sus scrofa domesticus), a native livestock variety from China’s Guangxi region, holds significant importance in Bama Yao Autonomous County. This breed not only supports regional meat production systems but also fulfills dual roles as human companions and valuable subjects for biomedical investigations. The aim of present study was to investigate the prevalence of G. duodenalis and assess its genetic characteristics. A total of 311 fresh fecal samples were collected from three farms in Bama Yao Autonomous County. The presence and genetic diversity of G. duodenalis were determined by nested PCR and sequence analysis of the glutamate dehydrogenase (gdh), β-giardin (bg) and triose phosphate isomerase (tpi) genes. Results: The total occurrence rate of G. duodenalis in Bamaxiang Pigs was 17.36% (54/311). Among different age groups, suckling piglets exhibited the highest infection rate at 24.29% (17/70). The infection rates in the sows, fattening pigs, and weaned piglets were 20.88% (19/91), 14.10% (11/78), and 9.72% (7/72), respectively (p < 0.05). Phylogenetic analysis of sequences from three genetic loci identified two G.duodenalis genetic assemblages, namely assemblages A and E. Among them, assemblage A (n = 31) was the predominant genotype across the three farms, followed by the assemblage E (n = 21) and mixed assemblage A/E (n = 2) infections. Conclusions: This study represents the first report demonstrating that G. duodenalis infection is prevalent in Bamaxiang pigs, with variable positivity rates across different growth stages. The zoonotic assemblage A was the predominant assemblage, suggesting a potential risk of transmission to humans through close contact with this specific pig breed. The results provide basic data for controlling infections in Bamaxiang pigs. Full article

HP, as an isotropic physical stress, has been widely applied in cell biology and reproductive research to simulate the effects of environmental pressure on cellular functions. In this study, the elastic silicone membrane of a novel bionic insemination catheter was employed as the pressure medium, with semen perfused into a sealed silicone chamber. As the silicone membrane underwent controlled deformation, the liquid inside the chamber generated a nearly uniform isotropic pressure, thereby maintaining spermatozoa in a stable HP environment. Boar sperm are susceptible to physiological and functional damage under HP stress, which can impair fertilization capacity. This study aimed to investigate the effects of TMAO, BET, or their combination on the quality of semen from eight Landrace boars under HP during storage at 17 °C (experiment repeated three times). Semen was collected using the manual collection method and treated with different concentrations of TMAO or BET. Sperm motility parameters were assessed using a CASA system to determine the optimal concentrations. Subsequently, experimental groups were established: the fresh group, HP control group, T group (optimal TMAO), B group (optimal BET), and H group (optimal TMAO + BET). The results showed that the optimal concentrations were 8 mmol/L for TMAO and 20 mmol/L for BET. Compared with the HP control group, the T, B, and H groups showed significantly improved sperm viability, mitochondrial membrane potential (MMP), and plasma membrane integrity (p < 0.05), and significantly reduced DFI, ROS, MDA, and NO contents (p < 0.05), while acrosome integrity showed no significant differences (p > 0.05). Additionally, the B group showed significantly increased T-AOC (p < 0.05). Non-targeted lipidomic analysis revealed 49 differential lipids in the T group, 262 in the B group, and 269 in the H group compared with the HP control. These differential lipids were mainly associated with PC, AcCa, and sphingolipid signaling pathways, with key sphingolipid pathway lipids including Cer, SM, and DG. These findings indicate that BET and TMAO + BET improve HP-induced sperm damage by modulating the sphingolipid signaling pathway and maintaining PC and AcCa levels, whereas TMAO alone may exert protective effects through additional mechanisms. In conclusion, TMAO, BET, or their combination effectively mitigates the detrimental effects of HP on boar sperm. Full article

This study developed a dual-antibody sandwich ELISA detection method for Photobacterium damselae, an important pathogen in aquaculture, based on two outer membrane proteins of outer membrane protein C (OmpC) and β-barrel assembly machinery A (BamA) from the strain of P. damselae XP11. By optimizing the reaction concentrations of the capture antibody of rabbit anti-OmpC or anti-BamA and the HRP-labeled detection antibody of rabbit anti-BamA, it was found that using 1.0 μg/mL of rabbit anti-OmpC or 0.9 μg/mL of rabbit anti-BamA as capture antibodies, and 0.90 μg/mL of HRP-labeled rabbit anti-BamA as the detection antibody, could specifically detect different isolates of P. damselae. The detection limit of this method for the supernatant protein of P. damselae disrupted by ultrasound was 0.2 μg/mL. Repeatability tests showed that the coefficient of variation for detecting 25 strains of bacteria was below 9.1%. Compared with the OmpC-BamA sandwich ELISA detection method, the BamA–BamA combination exhibited better specificity. The results of this study provide an important reference for the rapid detection of P. damselae and other bacterial pathogens in aquaculture. Full article

Wound dressings prevent complications such as infections and potentially severe outcomes, including death, if wounds are left untreated. Wound dressings have evolved from rudimentary coverings made from natural materials to sophisticated, functionalized dressings designed to enhance wound healing and support tissue repair more effectively. These materials are often referred to as scaffolds in the literature, with wound dressing scaffolds intended to interact with native skin tissue and support tissue regeneration, whereas conventional wound dressings are designed primarily to protect the wound without directly interacting with the underlying tissue. However, there is a functional overlap between these categories, and the boundary is often blurred due to the increasing multifunctionality of modern wound dressings. This review will focus on developing wound dressings (scaffolds or not) based on fibers, their properties, and applications. Advances in nanomedicine have highlighted significant improvements in wound care by applying electrospun nanofibers that mimic the natural extracellular matrix. Therefore, this review explores recent advances in wound healing physiology, highlights nanofiber-based wound dressing materials developed through electrospinning, and distinguishes conventional dressings from multifunctional wound dressing scaffolds. Full article

Standard blood agar medium with 2% NaCl (BAS) and Marine Agar (MA) are commonly used in bacteriological investigations of winter ulcers in farmed Atlantic salmon (Salmo salar Linnaeus) in Norway and allow easy recovery of Moritella viscosa based on its characteristic viscous colonies and β-hemolytic activity. However, the recent increase in cases of winter ulcers involving Tenacibaculum spp. and the potential emergence of T. maritimum due to rising temperatures highlight the need for improved methods of isolation and identification. Indeed, the recovery of Tenacibaculum spp. from outbreaks of winter ulcers or tenacibaculosis can be challenging. Despite the development of several agar media over the years to overcome this issue, such as Flexibacter maritimus medium (FMM), it remains difficult to differentiate Tenacibaculum species. We evaluated the growth dynamics and phenotypic characteristics of 13 bacterial isolates commonly associated with ulcer outbreaks on five different agar media, including two new formulations: kanamycin-supplemented marine blood agar for the selective isolation of Tenacibaculum spp. (KABAMA) and general blood agar for marine bacteria (BAMA). These new media facilitate the identification of Tenacibaculum spp., including T. maritimum, by distinguishing colonies based on their specific color, shape, and hemolytic activity. Full article

Effective prehospital hemostasis is pivotal for improving survival outcomes in arterial hemorrhage. Existing hemostatic materials have limitations in terms of both efficiency and portability, particularly under complex wound conditions. This study engineered a kaolin-reinforced biomimetic adhesive composite powder (DTG-K), which achieved dual hemostatic mechanisms: mechanical occlusion via strong interfacial adhesion (lap-shear strength of 58.3 kPa) and biochemical activation of the intrinsic coagulation pathway through factor XII. In vitro evaluations confirmed its exceptional hemocompatibility, with a 0.93% hemolysis rate. When applied to femoral artery hemorrhage models in Bama swine, DTG-K demonstrated complete hemostasis within 30 s through synergistic physical sealing and biochemical coagulation. These findings demonstrate the potential of DTG-K as an innovative strategy for managing life-threatening arterial hemorrhage in prehospital emergency scenarios. Full article

Mixing polymeric excipients with drugs in amorphous solid dispersions (ASD) is known to enhance the bioavailability of drugs by inhibiting their recrystallisation. However, the mechanisms underlying stabilisation remain not fully understood. This study aims to improve our understanding of the role of dynamics, particularly the molecular movements that drive instabilities, through investigations of ASD made of Polyvinylpyrrolidone (PVP K12) and a model drug, Terfenadine. The analyses combine temperature modulated differential scanning calorimetry (MDSC) and dielectric relaxation spectroscopy. The results reveal that the produced ASDs are supersaturated with Terfenadine, regardless of the content, and that PVP slows down the dynamics of the blends, limiting the recrystallisation of the drug during heating. Although the ASDs appear homogeneous based on thermal analysis with a single glass transition consistently detected by MDSC, the investigation of the dynamics reveals a dissociation of the main relaxation into two components for PVP contents below 30 wt.%. This dynamic heterogeneity suggests a structural heterogeneity with the coexistence of two amorphous phases of different compositions, each characterised by its own dynamics. The complex evolution of these dynamics under recrystallisation is rationalised by the confrontation with the phase and state diagram of Terfenadine/PVP blends established by MDSC. Full article

This study examines the impact of agroecological practices on soil quality and crop yields in small-scale farming, focusing on the combination of microbial soil inoculation, crop rotation, and conservation tillage methods. Conducted at the SZIA Agroecological Garden MATE in Gödöllő, Hungary, the experiment used 12 plots, employing various conservation tillage techniques, including soil loosening with and without microbial inoculants, as well as no-till systems with and without inoculation. Six of the plots were inoculated with beneficial bacteria to enhance nitrogen fixation, phosphorus mobility, nutrient solubilization, phytohormone production, and pathogen suppression. In 2024, peas (Pisum sativum L.) were planted following potatoes in a small-scale market-oriented crop rotation, with the continuous monitoring of crop performance and soil characteristics. This ongoing study focuses on evaluating the long-term effects of crop rotation on key agricultural parameters, aiming to optimize practices over time. Statistical analysis (one-way ANOVA) revealed no significant differences across most parameters (p > 0.05), except for total sugar content (p < 0.05), which aligns with expectations given the limited tillage prior to the study. The standard significance level of p < 0.05 was used to balance error risks, ensure adequate statistical power, and maintain consistency with established agricultural research practices. However, the study trends indicated potential long-term benefits, particularly in plots with microbial inoculants, where pea yield and pod size showed improvement compared to non-inoculated and control plots. Microbial inoculants may show long-term effects, as they gradually improve soil health, support microbial communities, and enhance nutrient cycling, which takes time to become noticeable. These findings highlight the potential advantages of combining conservation tillage with microbial inoculants, suggesting that this combination could foster enhanced soil health and productivity over time. The novel setting of this study underscores the importance of long-term monitoring to fully capture the benefits of agroecological interventions, emphasizing their role in achieving sustainable agricultural practices and improving small-scale farming outcomes. Full article

Vegetable oils rich in unsaturated fatty acids have been shown to improve animal health and enrich milk with functional fatty acids in various studies. This study investigates the effects of dietary supplementation with hemp seed oil (HSO), a native vegetable oil from the “longevity village” of Bama (Guangxi, China), on the milk performance, milk fatty acid composition, blood indicators, and rumen bacterial community of milk-producing buffalo. Seventeen healthy, four-year-old, crossbred, milk-producing buffaloes with the same parity (three), as well as similar body weights (BW = 580 ± 25 kg), number of days producing milk (DIM, 153 ± 10 d), and milk yields (8.56 ± 0.89 kg/d) were divided into three groups (n = 6, 5, and 6) and assigned to the following diets: (1) no HSO supplement (H0, n = 6), (2) a supplement of 100 g/d of HSO (H1, n = 5), and (3) a supplement of 200 g/d of HSO (H2, n = 6). The total experimental period was 42 days (including a 14-day adaptation period and a 28-day treatment period). The data were statistically analyzed by repeated measures analysis of variance. The results showed that compared to that of no HSO supplement group, the dry matter intake (DMI) showed a decreasing tendency (p = 0.06), while feed efficiency and rumen fermentation remained similar across all the groups (p > 0.05) with dietary HSO supplementation. Moreover, with dietary HSO supplementation, the total antioxidant capacity (T-AOC) (p = 0.05) and catalase (CAT) (p < 0.01) and glutathione peroxidase (GSH-Px) (p = 0.02) contents in the serum were greatly increased, with the highest levels observed in the H2 group (increased by 1.16 U/mL, 1.15 U/mL, and 134.51 U/mL, respectively). In contrast, the malondialdehyde (MDA) content was significantly decreased with dietary HSO supplementation (p = 0.02) and was the lowest in the H1 group (decreased by 0.72 nmol/mL). The high-density lipoprotein cholesterol (HDL-C) content in the blood showed an increasing tendency with dietary HSO supplementation (p = 0.09). Moreover, with dietary HSO supplementation, the proportions of C18:0 (p = 0.02), C18:1n9t (p = 0.02), C18:2n6c (p = 0.02), C18:3n3 (p < 0.01), C18:2n9c (p = 0.04), omega-3 (p = 0.02), and omega-6 (p = 0.02) were significantly increased, with the highest levels observed in the H2 group (increased by 5.29 g/100 g FA, 1.81 g/100 g FA, 0.55 g/100 g FA, 0.14 g/100 g FA, 0.75 g/100 g FA, 0.17 g/100 g FA, and 0.56 g/100 g FA, respectively). Additionally, rumen Acetobacter abundance was significantly affected by HSO addition (p = 0.03), with rumen Acetobacter abundance decreasing in the H1 group (by 0.55%) and increasing in the H2 group (by 0.73%). These results suggest that adding HSO to milk-producing buffalo diets does not affect feed efficiency or rumen fermentation, although it decreases the DMI. Meanwhile, it can improve the nutritional quality of milk, enhance the antioxidant status, and regulate blood lipid metabolism in milk-producing buffaloes. Full article

Background: Docosahexaenoic Acid (DHA) is an extensively used nutrition supplement in dairy food because of its beneficial effects on cognition. To find an effective DHA intervention for the synapses in the cortex during this period, this study aimed to use targeted lipidomics to evaluate the lipid composition of prefrontal-cortex (PFC) tissue in different DHA interference methods. Methods: Analyzed samples were taken from interfering feeding Bama pigs (BPs) (3 months) fed with soybean oil (Group B), blended oil (Group M), naturally DHA-supplemented milk with blended oil (Group OM), and DHA from fish oil (FO) with blended oil (Group Y). We also examined the protein expression levels of BDNF, GAP43, and MBP. Results: The lipidomics analysis identified 80 different related negative-ion lipid content and filtered the biomarker lipids in PFC tissue. We observed significant lipid composition changes between group Y and other groups, especially for content levels of phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidylinositol (PI), phosphatidylserine (PS), and sphingomyelin (SM). The same observations were made from mRNA and protein expressions related to lipid transportation, phosphatidylserine (PS) synthetase, and synaptic plasticity in PFC tissues between group Y and other groups, including the mRNA expression levels of CD36, BDNF, and PTDSS1. The analysis of protein expression levels showed that the metabolism mode of DHA intervention from FO benefited the PFC, PS metabolism, and PFC synaptic plasticity of infants. Conclusions: The results highlight further prospects for the DHA intervention mode, which provides new routes for other studies on polyunsaturated-fatty-acid (PUFA) interference for infants. Full article

Blastocystis spp. and Enterocytozoon bieneusi are common intestinal pathogens capable of infecting both humans and animals, which lead to severe diarrhea and other intestinal diseases, posing a threat to public health. The Bamaxiang pig, a specialty of Bama Yao Autonomous County in Guangxi Province, China, is an important local breed in the regional pork market and an excellent model animal for biomedical research. Currently, no data is available on the prevalence or genotype distribution of these pathogens in Bamaxiang pigs. This study aimed to determine the prevalence and genetic characteristics of Blastocystis spp. and E. bieneusi in three Bamaxiang pig farms located in Bama Yao Autonomous County, using molecular techniques based on the small subunit ribosomal RNA (SSU rRNA) gene fragment of Blastocystis spp. and the internal transcribed spacer (ITS) region of E. bieneusi. All positive PCR products from the 311 fecal samples were sequenced to identify the species and genotypes of these organisms. The overall infection rates of Blastocystis spp. and E. bieneusi were 34.08% (106/311) and 18.32% (57/311), respectively. Three subtypes of Blastocystis spp. were detected: ST1 (n = 8), ST3 (n = 3), and ST5 (n = 95). Among them, zoonotic ST5 was the dominant genotype, accounting for 89.62% (95/106) of strains, followed by the genotypes ST1 (7.54%, 8/106) and ST3 (2.83%, 3/106). Two genotypes of E. bieneusi were detected: EbpC (n = 52) and CHG23 (n = 5), with EbpC being the dominant genotype. The human-pathogenic subtypes (ST1, ST3, and ST5) and genotypes (EbpC, CHG23) that were observed in this study indicate a potential threat to public health. Our findings offer basic information for preventing and controlling these zoonotic pathogens in the study area. Additional investigations are necessary to better understand their genetic characteristics and zoonotic potential within Guangxi Province. Full article

The β-barrel assembly machinery (BAM) is a multimeric protein complex responsible for the folding of outer membrane proteins in gram-negative bacteria. It is essential for cell survival and outer membrane integrity. Therefore, it is of impact in the context of antibiotic resistance and can serve as a target for the development of new antibiotics. The interaction between two of its subunits, BamA and BamD, is essential for its function. Here, a FRET-based assay to quantify the affinity between these two proteins in living bacterial cells is presented. The method was applied to identify two interaction hotspots at the binding interface. BamD^Y184 was identified to significantly contribute to the binding between both proteins through hydrophobic interactions and hydrogen bonding. Additionally, two salt bridges formed between BamD^R94, BamD^R97, and BamA^E127 contributed substantially to the binding of BamA to BamD as well. Two peptides (RFIRLN and VAEYYTER) that mimic the amino acid sequence of BamD around the identified hotspots were shown to inhibit the interaction between BamA and BamD in a dose-dependent manner in the upper micromolar range. These two peptides can potentially act as antibiotic enhancers. This shows that the BamA–BamD interaction site can be addressed for the design of protein–protein interaction inhibitors. Additionally, the method, as presented in this study, can be used for further functional studies on interactions within the BAM complex. Full article

The unique flavour contribution of higher alcohols in alcoholic beverages has received growing attention; however, there is a dearth of information on their in vivo metabolic kinetics. In this study, the composition and content of higher alcohols in different alcoholic beverages from Chinese Baijiu and Lujiu were studied via in vivo analysis using Bama pigs to elucidate the mechanisms for intoxication of alcohol in vitro and in drinkers. Direct injection combined with gas chromatography–mass spectrometry (GC-MS) were used to accurately quantify a total of 14 higher alcohols in five alcoholic beverages. Based on the external standard method, a total content of 289.37–938.33 mg/L was detected, mainly 1-butanol, 3-methyl-1-butanol, 1-hexanol, 2-methyl-1-propanol and 2-butanol. Then, headspace solid-phase microextraction (HS-SPME) and solid-phase extraction (SPE) combined with GC-MS analysis strategy, respectively, were adopted to continuously monitor the changes in the concentrations of ethanol and 11 higher alcohols in the blood within 24 h after gavage of different alcoholic beverages, and the key pharmacokinetic parameters were analysed. The peak concentration (C_max) and area under curve (AUC) of blood higher alcohols were significantly lower than those of ethanol (p < 0.05), accompanied by a later peak time (T_max) and a larger apparent clearance rate (CL_F), and there were certain differences between the same higher alcohols in different alcoholic beverages and between different higher alcohols in the same alcoholic beverage. This work provides valuable insights into the metabolism of alcoholic beverages. Full article

Esthetically pleasing temporary prostheses are often necessary for extended periods in a variety of clinical scenarios. Adjustments to the occlusion or margins are commonly needed before cementing the temporary prosthesis. Therefore, it is clinically necessary to repolish the rough surface to avoid biological and esthetic issues associated with rough surfaces. The purpose of this in vitro study was to assess and compare the impact of various polishing protocols on the surface roughness and color stability of three resin materials used for provisional crowns. A total of 150 specimens were fabricated from auto-polymerizing polymethyl methacrylate, bis-acryl composite, and Methyl methacrylate-LC resin using a stainless steel mold. Each material group was divided into five groups (n = 10) based on the applied surface treatment: positive control group (G1): no roughening or surface treatment, Negative control group (G2): acrylic bur-roughened surface without any polishing, the different surface treatment groups of silicon carbide and aluminum oxide stone polishing (G3), diamond-coated rubber twist (G4), and Surface Glaze (G5). An optical profilometer was used to assess the surface roughness of all samples. After undergoing 6000 cycles of thermocycling followed by immersion in a coffee solution for 15 days at 37 °C, color parameters were measured using a spectrophotometer both before and after a storage period to evaluate color differences. A two-way ANOVA test with α = 0.05 significance level was carried out to determine the impacts of both the materials utilized and the polishing protocol. Among the three types of resin examined, the bisacryl group exhibited superior surface quality in positive control groups, while PMMA resin demonstrated higher polishability. The diamond-coated rubber twits resulted in lower Ra values of 0.36 (0.01) µm, 0.52 (0.11) µm, and 0.28 (0.05) µm for PMMA, BAMA, and MMLC resins, respectively. The application of photo-polymerized surface glaze led to a plaque accumulation threshold of 0.2 µm across all resin groups. The greatest mean color change occurred in the negative control group, indicating a propensity for more staining on rougher surfaces. The Bisacryl resin exhibited higher ΔE values, whereas PMMA showed better color stability. The lowest ΔE values were found when the surface glaze was applied to all of the provisional crown resins. Untreated Bisacryl resin exhibited the lowest Ra values, while PMMA resins demonstrated superior surface morphology after polishing. PMMA provisional crown resins showed increased resistance to staining. The use of surface glaze enhanced both smoothness and color stability on the surfaces. Full article