Search Results (45)

The development of nanoscale chiral materials with enhanced optical properties holds significant promise for advancing technologies in light-emitting devices and enantioselective sensing. Here, we report the self-assembly of chiral metal–organic cages from an axially chiral, AIE-active binaphthyl dicarboxylate ligand. This supramolecular architecture functions as a multifunctional platform, demonstrating a high affinity for anionic guests through synergistic electrostatic and hydrogen-bonding interactions. The rigid cage framework not only enhances the ligand’s intrinsic aggregation-induced emission (AIE) but also serves as a highly effective chiral amplifier. Notably, MOCs significantly boost the circularly polarized luminescence (CPL), achieving a luminescence dissymmetry factor (|g_lum|) of 1.2 × 10⁻³. This value represents an approximately five-fold enhancement over that of the unassembled ligand. The photophysical properties of this chiral supramolecular system provide a strategic blueprint for designing next-generation optical nanomaterials. Full article

A chiral gelator (R)-H₆L with multiple carboxyl groups based on a 1,1′-bi-2,2′-naphthol (BINOL) skeleton was prepared, and it could form a supramolecular gel under the induction of water in DMSO/H₂O and DMF/H₂O (1/1, v/v). In the EtOH/H₂O system, the original partial gel transformed into a stable metal–organic gel (MOG), specifically with Cu²⁺ among 20 metal ions. It is proposed that Cu²⁺ coordinates with the carboxyl groups of (R)-H₆L to form a three-dimensional network structure. With the addition of a variety of α-hydroxy acids and amino acids, the Cu²⁺-MOG collapsed with merely 0.06 equivalents of L-tartaric acid (L-TA), while other acids required much larger amounts to achieve the same effect, realizing the visual chemoselective and enantioselective recognition of tartaric acid. Therefore, the chiral gelator (R)-H₆L achieved the tandem visual recognition of Cu²⁺ and chiral tartaric acid by sequence gel formation and collapse, offering valuable insights for visual sensing applications and serving as a promising model for future chiral sensor design. Full article

In this paper, two aggregation-induced emission (AIE) chiral fluorescent materials, S-1 and S-2, were synthesized. The two materials are based on BINOL and H₈-BINOL backbones, respectively, and large electron-absorbing groups are attached to the chiral backbones through the Knoevenagel reaction. At the same time, the CD signals of these two chiral fluorescent materials are gradually weakened (f_w gradually increases) as they continue to aggregate. However, S-2 underwent a flip-flop from a negative to positive chiral CD signal at f_w ≥ 90. And both materials also showed significant enantioselective recognition of lysine, demonstrating their potential as novel chiral fluorescent probes. Among them, the enantioselective fluorescence enhancement ratios (ef) of S-1 and S-2 for lysine were 10.0 and 10.3, respectively, while different degrees of blue shifts were produced by the ICT mechanism during the recognition process. In addition, the self-assembled morphology of the two nanomaterials is different; S-1 comprises hollow-core vesicles that are more likely to aggregate to form larger self-assembled vesicles, whereas S-2 is a solid block structure. When L/D-lysine was added alone, the morphology of S-1 was more distinctly different compared to S-2. With the addition of L-lysine, S-1 was dispersed and regularly spherical, whereas with the addition of D-lysine, S-1 itself remained in the form of aggregated large vesicles. This suggests that both S-1 and S-2 are important in the fields of chiral optics, chiral recognition, and nanoscale self-assembly. Full article

The chiral H₈-BINOL derivatives R-1 and R-2 were efficiently synthesized via a Suzuki coupling reaction, and they can be used as novel dialdehyde fluorescent probes for the enantioselective recognition of R/S-2-amino-1-phenylethanol. In addition, R-1 is much more effective than R-2. Scanning electron microscope images and X-ray analyses show that R-1 can form supramolecular vesicles through the self-assembly effect of the π-π force and strong hydrogen bonding. As determined via analysis, the fluorescence of the probe was significantly enhanced by mixing a small amount of S-2-amino-1-phenylethanol into R-1, with a redshift of 38 nm, whereas no significant fluorescence response was observed in R-2-amino-1-phenylethanol. The enantioselective identification of S-2-amino-1-phenylethanol by the probe R-1 was further investigated through nuclear magnetic titration and fluorescence kinetic experiments and DFT calculations. The results showed that this mechanism was not only a simple reactive probe but also realized object recognition through an ICT mechanism. As the intramolecular hydrogen bond activated the carbonyl group on the probe R-1, the carbonyl carbon atom became positively charged. As a strong nucleophile, the amino group of S-2-amino-1-phenylethanol first transferred the amino electrons to a carbonyl carbocation, resulting in a significantly enhanced fluorescence of the probe R-1 and a 38 nm redshift. Similarly, S-2-amino-1-phenylethanol alone caused severe damage to the self-assembled vesicle structure of the probe molecule itself due to its spatial structure, which made R-1 highly enantioselective towards it. Full article

A novel fluorescent “off” probe R-β-D-1 containing a 1,2,3-triazole moiety was obtained by the Click reaction with azidoglucose using H₈-BINOL as a substrate, and the structure was characterized by ¹H NMR and ¹³C NMR and ESI-MS analysis. The fluorescence properties of R-β-D-1 in methanol were investigated, and it was found that R-β-D-1 could be selectively fluorescently quenched by Bi³⁺ in the recognition of 19 metal ions and basic cations. The recognition process of Bi³⁺ by R-β-D-1 was also investigated by fluorescence spectroscopy, SEM, AFM, etc. The complex pattern of R-β-D-1 with Bi³⁺ was determined by Job’s curve as 1 + 1, and the binding constant K_a of R-β-D-1 and Bi³⁺ was valued by the Benesi–Hildebrand equation as 1.01 × 10⁴ M⁻¹, indicating that the binding force of R-β-D-1 and Bi³⁺ was medium. The lowest detection limit (LOD) of the self-assembled H₈-BINOL derivative for Bi³⁺ was up to 0.065 µM. The mechanism for the recognition of Bi³⁺ by the sensor R-β-D-1 may be the intramolecular charge transfer effect (ICT), which was attributed to the fact that the N-3 of the triazole readily serves as an electron acceptor while the incorporation of Bi³⁺ serves as an electron donor, and the two readily undergo coordination leading to the quenching of fluorescence. The recognition mechanism and recognition site could be verified by DFT calculation and CDD (Charge Density Difference). Full article

The two enantiomers of chiral phosphonate 4-phenyldinaphtho[2,1-d:1′,2′-f][1,3,2]dioxaphosphepine 4-oxide, O=PPh(BINOL), were synthesized from the proper 1,1′-bi-2-naphtol (BINOL) enantiomer and characterized. The structure of the (S)-enantiomer was elucidated by means of single-crystal X-ray diffraction. The reaction with anhydrous ZnBr₂ afforded complexes having the general formula [ZnBr₂{O=PPh(BINOL)}₂] that showed intense fluorescence centered in the near-UV region rationalized on the basis of TD-DFT calculations. The corresponding Mn(II) complexes with the general formula [MnX₂{O=PPh(BINOL)}₂] (X = Cl, Br) exhibited dual emission upon excitation with UV light, with the relative intensity of the bands dependent upon the choice of the halide. The highest energy transition is comparable with that of the Zn(II) complex, while the lowest energy emission falls in the red region of the spectrum and is characterized by lifetimes in the hundreds of microseconds range. Although the emission at lower energy can also be achieved by direct excitation of the metal center, the luminescence decay curves suggest that the band in the red range is possibly derived from BINOL-centered excited states populated by intersystem crossing. Full article

The Petasis reaction, also called the Petasis Borono–Mannich reaction, is a multicomponent reaction that couples a carbonyl derivative, an amine and boronic acids to yield substituted amines. The reaction proceeds efficiently in the presence or absence of a specific catalyst and solvent. By employing this reaction, a diverse range of chiral derivatives can easily be obtained, including α-amino acids. A broad substrate scope, high yields, distinct functional group tolerance and the availability of diverse catalytic systems constitute key features of this reaction. In this review article, attention has been drawn toward the recently reported methodologies for executing the Petasis reaction to produce structurally simple to complex aryl/allyl amino scaffolds. Full article

Transesterification is a synthetic chemistry strategy promoted in acid or alkaline conditions, yielding a structural diversity of organic compounds. Epoxythymols comprise a class of chiral natural compounds with biological relevance, and the literature describes their chiral purity loss during acid transesterification reactions. This work reports the basic transesterification of the natural derivative (8S)-10-benzoylxy-8,9-epoxy-6-hydroxythymol under alkaline conditions. Herein, the formation of (8S)-10-benzoylxy-6-isobutyryloxy-8,9-epoxythymol isobutyrate is gained, avoiding the loss of optical purity. ¹H NMR-BINOL experiments revealed the enantiomeric purity of the product reaction. These results highlight that the implemented strategy promotes transesterification, preserving optical purity. Full article

We have synthesized and studied three new chiral substances as additives to a nematic liquid crystal. The difference in the optical activity and chemical structure of additive molecules results in the appearance of the chiral nematic phase and the change in both the compatibility of the mixture components and temperature range of the liquid crystal phase. The role of additives with fundamentally different structures and optical activities is shown. The increase in the T_NI that is observed in mixtures with 4-[(2S)-(+)-2-Methylbutoxy]benzoic acid indicate the possibility of the increase in order caused by the formation of molecularly rigid and elongated dimers of the additive, which was confirmed using infrared spectra. The doping of the nematic liquid crystal with (2R)-(+)-2-[4-[2-Chloro-4-(4-hexylphenyl)phenyl]phenoxy]propanoic acid causes the lowering of T_NI. The binol derivative S-(+)-6-[1-[2-(5-Carboxypentoxy)naphthalen-1-yl]naphthalen-2-yl] oxyhexanoic acid has the highest chirality among the additives used. One can explain the effects observed in terms of the role of size, shape, and compatibility with the nematic matrix as shown by the molecules that are used as additives. Full article

Because of easy functionalization, low cost, and large-scale fabrication, pure organic fluorescent polymers are widely applied in light-emitting display, bio-fluorescence-enhanced imaging, explosive detection, and other fields. Among these applications, due to their unique optical rotation characteristics, chiral fluorescent polymer materials are part of fluorescent polymers which could be used in chiral molecular detection and separation, biological target detection, etc. In this work, we designed and synthesized the first chiral organic fluorescent polysulfate materials through sulfur fluoride exchange polymerization (new click chemistry) by asymmetric binaphthol molecular. The chiral fluorescent polysulfate were synthesized by R/S [1,1′-binaphthalene]-2,2′-diol(Binol.), propane-2,2-diylbis(4,1-phenylene) bis(sulfurofluoridate) (FO₂S–BA–SO₂F) and 4,4′-(propane-2,2-diyl)diphenol(BA.) through step-by-step polymerization reaction under alkali present. It was found that the local crystallization of pure bisphenol A polysulfate was broken by the asymmetric axial chiral BINOL molecule inserted in it and let the polymer into the amorphous state. Fluorescent chiral molecules are uniformly dispersed in the polymer; the 120 µm film prepared by the film scraper was transparent and had good luminescence characteristics under ultraviolet light. After fluorescence detection, the excitation wavelength is 450 nm, and the emission wavelength is 480 and 517 nm. Full article

Commercially available copper and copper (II) oxide nanoparticles (CuNPs and CuO NPs) were characterized using TEM and electronography methods to elucidate their true average size and composition. The catalytic amine arylation using unsupported copper nanoparticles differing in their size and copper oxidation state was investigated. The reaction of the model iodobenzene with n-octylamine was shown to be successfully catalyzed by CuNPs of average size 25 and 10/80 nm in the presence of the ligands such as 2-isobutyrylcyclohexanone (L1) and rac-1,1′-bi-2-naphthol (BINOL, L2), giving high yields (up to 95%) of the target N-octylaniline. CuO in bulk and nano forms was shown to be almost equally efficient in this process. Studies on the Cu-catalyzed amination of substituted iodobenzenes and 2-iodopyridine, as well as the arylation of different aliphatic amines and NH-heterocycles, verified that CuNPs (25 or 10/80 nm) with L1 and L2 are the most versatile and efficient nanocatalysts for a variety of substrates. Investigation of copper leaching under different conditions was carried out. Full article

BINOL derivatives have shown relevant biological activities and are important chiral ligands and catalysts. Due to these properties, their asymmetric synthesis has attracted the interest of the scientific community. In this work, we present an overview of the most efficient methods to obtain chiral BINOLs, highlighting the use of metal complexes and organocatalysts as well as kinetic resolution. Further derivatizations of BINOLs are also discussed. Full article

Science the biological activities of chiral enantiomers are often different or even opposite, their chiral recognition is of great significance. A new assembly structure named TCPP-Zn-(S)-BINOL was obtained based on the interaction between chiral binaphthol (BINOL) and the porphyrin-based MOF structure formed by Meso-Tetra(4-carboxyphenyl)porphine (TCPP) and Zn²⁺, and a new chiral sensor was designed relying on TCPP-Zn-(S)-BINOL. The chiral platform was designed by using binaphthol as a chiral recognizer and the porphyrin MOF as an emitter, which can recognize tyrosine (Tyr) enantiomers via the electrochemiluminescence (ECL) method. According to density functional theory (DFT), TCPP-Zn-(S)-BINOL has a different affinity with L/D-Tyr due to the different strength of the hydrogen bond between chiral ligand BINOL and the tyrosine (Tyr) enantiomer. It will be more suitable for combination with L-Tyr, and the presence of L-Tyr will increase the ECL intensity of the modified electrode via the catalytic reduction of co-reactant reagents, achieving the purpose of the chiral recognition of Tyr enantiomers. These findings show that TCPP-Zn-(S)-BINOL can be used as an advanced ECL chiral recognition platform for biomedical applications. Full article

An imidazole bromide fluorescent probe (R)-1 based on chiral H₈-BINOL was synthesized with a high yield; it was found to have good enantioselective recognition of lysine and phenylalanine using fluorescence analysis. When L-lysine was recognized, the enantioselective fluorescence enhancement ratio was 2.7 (ef = I_L − I₀/I_D − I₀, ef = 2.7, 20 eq Lys); as the amount of L-Lys increased, a distinct red shift was observed (the wavelength varied by 55.6 nm, 0–100 eq L-Lys), whereas D-Lys had a minimal red shift. The generation of this red shift phenomenon was probably due to the ICT effect; the probe’s intramolecular charge transfer was affected after (R)-1 bound to L-Lys, and this charge transfer was enhanced, leading to a red shift in fluorescence. In addition to the enantioselective recognition of lysine, phenylalanine was also recognized; the enantioselective fluorescence enhancement ratio was 5.1 (ef = I_L − I₀/I_D − I₀, ef = 5.1, 20 eq Phe). Full article

An example of a new BODIPY design with triplet state population is reported: BINOL-O-BODIPY-based dimer. This new design combines two easily accessible structural features with a demonstrated capability of populating triplet states without the need for iodine or heavy metals: meso-p-phenylene-bridged BODIPY dimer and BINOL-O-BODIPY. Full article