Search Results (1,420)

The increasing interest shared by academia and industry in the development of RISC-V cores, extensions and accelerators becomes fructified by collaborative efforts, like the EU’s ChipsJU, which leverages the design of building blocks, IPs and cores based on RISC-V architecture. A domain capable of benefiting from the RISC-V extensibility is the control of external DACs and ADCs. The proposed solution is an open-source RISC-V extension for optimized control of external DACs and ADCs called RiscADA. The extension supports a parametrizable number of DACs and ADCs, is integrated as a coprocessor beside CVA6 in a SoC by using the CV-X-IF interface, deployed on a Kintex UltraScale+ FPGA and implements ISA extension instructions. After benchmarks with commercial solutions, the results show that CVA6 using RiscADA extension configures external DACs 38.6 × and 10.9× times faster than MicroBlaze V and simple CVA6, both using AXI SPI peripherals. The proposed extension achieves 5.35× and 3.05× times higher sample rates of external ADCs than the two configurations mentioned above. RiscADA extension performs digital signal conditioning 4.52× and 3.1× times faster than the MicroBlaze V and CVA6, both using AXI SPI peripherals. It computes statistics for external ADC readings (minimum, maximum, simple-moving average and over-threshold duration). Full article

The literature clearly indicates that both academia and industry are strongly committed to developing comprehensive processes for spent Li-ion battery (LIB) recycling. In this regard, the current study presents an original contribution by providing a quantitative assessment of a large-scale recycling plant designed for the treatment of completely spent LIBs. In addition to a concept of the basic process, this assessment also considers a case study of a thermal integration and CO₂ capture subsystem. Process flow modeling software was used to evaluate the contribution of all process steps and equipment to overall energy consumption and to mass balance the data required for the technical assessment of the large-scale recycling plant. To underline the advantages and identify the optimal novel process concept, several key performance indicators were determined, such as recovery efficiency, specific energy/material consumption, and specific CO₂ emissions. In addition, the economic potential of the recycling plants was evaluated for the defined case studies based on capital and O&M costs. The results indicate that, even with CO₂ capture applied, the thermally integrated process with the combustion of hydrogen produced in the recycling plant remains the most promising large-scale configuration for spent LIB recycling. Full article

Accurate weld seam recognition is essential in automated welding systems, as it directly affects path planning and welding quality. With the rapid advancement of industrial vision, weld seam instance segmentation has emerged as a prominent research focus in both academia and industry. However, existing approaches still face significant challenges in boundary perception and structural representation. Due to the inherently elongated shapes, complex geometries, and blurred edges of weld seams, current segmentation models often struggle to maintain high accuracy in practical applications. To address this issue, a novel structure-aware and boundary-enhanced YOLO (SABE-YOLO) is proposed for weld seam instance segmentation. First, a Structure-Aware Fusion Module (SAFM) is designed to enhance structural feature representation through strip pooling attention and element-wise multiplicative fusion, targeting the difficulty in extracting elongated and complex features. Second, a C2f-based Boundary-Enhanced Aggregation Module (C2f-BEAM) is constructed to improve edge feature sensitivity by integrating multi-scale boundary detail extraction, feature aggregation, and attention mechanisms. Finally, the inner minimum point distance-based intersection over union (Inner-MPDIoU) is introduced to improve localization accuracy for weld seam regions. Experimental results on the self-built weld seam image dataset show that SABE-YOLO outperforms YOLOv8n-Seg by 3 percentage points in the AP(50–95) metric, reaching 46.3%. Meanwhile, it maintains a low computational cost (18.3 GFLOPs) and a small number of parameters (6.6M), while achieving an inference speed of 127 FPS, demonstrating a favorable trade-off between segmentation accuracy and computational efficiency. The proposed method provides an effective solution for high-precision visual perception of complex weld seam structures and demonstrates strong potential for industrial application. Full article

Integrating BIM curriculum into traditional construction management (CM) programs is essential to meet the increasing industry demand for BIM-ready graduates. However, academia struggles with BIM curriculum integration due to unfamiliar emerging BIM technologies, and the increased workload associated with curriculum transformation. Disciplines including nursing, health science, and medical overcame the same challenges using the ability-desire-knowledge-ability-reinforcement (ADKAR) change management model, while CM programs have not explored this model for BIM curriculum development. Thus, this research introduces the ADKAR change management lens to BIM curriculum development by proposing a practically modified and replicable ADKAR model for CM programs. Focus group interviews with 14 academics from the UK, USA, Korea, and Australia, revealed establishing a sense of urgency by appointing a BIM champion is the most critical step before the BIM curriculum development. Instant advice demystifying uncertain BIM concepts is recognised the most effective motivation among academia. Well-balanced BIM concept integrations is ‘sine qua non’ since excessively saturating BIM aspects across the program can dilute students’ essential domain knowledge. Students’ evaluation over the BIM curriculum were collected through a six-year longitudinal focus group interviews, revealing that progressive BIM learnings scaffolded from foundational concepts to advanced applications throughout their coursework is the most valuable. Full article

In recent years, growing concerns over environmental degradation and deepening awareness of the necessity of sustainable development have propelled green and low-carbon energy transition into a focal issue for both academia and policymakers. By decomposing energy transition into the transformation of energy structure and the upgrading of energy efficiency, this study investigates the impact and mechanisms of green finance on energy transition across 30 provinces (municipalities and autonomous regions) in China, with the exception of Tibet. In addition, the impact of climate change is incorporated into the analytical framework. Empirical results demonstrate that green finance development significantly accelerates energy transition, a conclusion robust to rigorous validation. Analysis of the mechanism shows that green finance promotes energy transition through the facilitation of technological innovation and the upgrade of industrial structures. Moreover, empirical evidence reveals that climate change undermines the promotional influence of sustainable finance on energy system transformation. The magnitude of this suppression varies nonlinearly across provincial jurisdictions with differing energy transition progress. Regional heterogeneity analyses further uncover marked discrepancies in climate–finance interactions, demonstrating amplified effects in coastal economic hubs, underdeveloped western provinces, and regions with mature eco-financial markets. According to these findings, actionable policy suggestions are put forward to strengthen green finance and accelerate energy transition. Full article

Maintaining well integrity is essential in the oil and gas industry to prevent environmental hazards, operational risks, and economic losses. Cement bond log (CBL) tools are essential in evaluating cement bonding and ensuring wellbore stability. This study presents a patent landscape review of CBL technologies, based on 3473 patent documents from the Lens.org database. After eliminating duplicates and irrelevant entries, 167 granted patents were selected for in-depth analysis. These were categorized by technology type (wave, electrical, radiation, neutron, and other tools) and by material focus (formation, casing, cement, and borehole fluid). The findings reveal a dominant focus on formation evaluation (59.9%) and a growing reliance on wave-based (22.2%) and other advanced tools (25.1%), indicating a shift toward high-precision diagnostics. Geographically, 75% of granted patents were filed through the U.S. Patent and Trademark Office, and 97.6% were held by companies, underscoring the dominance of corporate innovation and the minimal presence of academia and individuals. The review also identifies notable patents that reflect significant technical innovations and discusses their role in advancing diagnostic capabilities. These insights emphasize the need for broader collaboration and targeted research to advance well integrity technologies in line with industry goals for operational performance and safety. Full article

Background/Objectives: In many parts of the world, pharmacists hold the primary responsibility for providing safe and effective pharmacotherapy. A key aspect is the availability of appropriate medicines for each individual patient. When industrially manufactured medicines are unsuitable or unavailable, pharmacists can prepare tailor-made medicines. While this principle applies globally, practices vary between countries. In the Netherlands, the preparation of medicines in pharmacies is well-established and integrated into routine healthcare. This narrative review explores the role and significance of extemporaneous compounding, pharmacy preparations and related product care in the Netherlands. Methods: Pharmacists involved in pharmacy preparations across various professional sectors, including community and hospital pharmacies, central compounding facilities, academia, and the professional pharmacists’ organisation, provided detailed and expert insights based on the literature and policy documents while also sharing their critical perspectives. Results: We present arguments supporting the need for pharmacy preparations and examine their position and role in community and hospital pharmacies in the Netherlands. Additional topics are discussed, including the regulatory and legal framework, outsourcing, quality assurance, standardisation, education, and international context. Specific pharmacy preparation topics, often with a research component and a strong focus on product care, are highlighted, including paediatric dosage forms, swallowing difficulties and feeding tubes, hospital-at-home care, reconstitution of oncolytic drugs and biologicals, total parenteral nutrition (TPN), advanced therapy medicinal products (ATMPs), radiopharmaceuticals and optical tracers, clinical trial medication, robotisation in reconstitution, and patient-centric solid oral dosage forms. Conclusions: The widespread acceptance of pharmacy preparations in the Netherlands is the result of a unique combination of strict adherence to tailored regulations that ensure quality and safety, and patient-oriented flexibility in design, formulation, and production. This approach is further reinforced by the standardisation of a broad range of formulations and procedures across primary, secondary and tertiary care, as well as by continuous research-driven innovation to develop new medicines, formulations, and production methods. Full article

The development of Industry 4-oriented facilities in academia for training and research purposes is playing a significant role in pushing forward the Fourth Industrial Revolution. This study can serve academic staff who are intending to build their Industry 4 facilities, to better understand the key features, constraints, and opportunities. This paper presents a systematic literature review of 145 peer-reviewed studies published between 2011 and 2023, which are identified across Scopus, SpringerLink, and Web of Science. As a result, we emphasise the significance of developing Industry 4 learning facilities in academia and outline the main design principles of the Industry 4 ecosystems. We also investigate and discuss the key Industry 4-related technologies that have been extensively used and represented in the reviewed literature, and summarise the challenges and roadblocks that current participants are facing. From these insights, we identify research gaps, outline technology mapping and maturity level, and propose a strategic roadmap for future implementation of Industry 4 facilities. The results of the research are expected to support current and future participants in increasing their awareness of the significance of the development, clarifying the research scope and objectives, and preparing them to deal with inherent complexity and skills issues. Full article

This study, based on engineering education accreditation standards, addresses the supply–demand imbalance in China’s cybersecurity talent cultivation by constructing a sustainable “education-industry-society” collaborative model. Through case studies at Huaihua University and other institutions, employing methods such as literature analysis, field research, and empirical investigation, we systematically explore reform pathways for an innovative cybersecurity talent development system. The research proposes a “three-platform, four-module” practical teaching framework, where the coordinated operation of the basic skills training platform, comprehensive ability development platform, and innovation enhancement platform significantly improves students’ engineering competencies (practical courses account for 41.6% of the curriculum). Findings demonstrate that eight industry-academia practice bases established through deep collaboration effectively align teaching content with industry needs, substantially enhancing students’ innovative and practical abilities (172 national awards, 649 provincial awards). Additionally, the multi-dimensional evaluation mechanism developed in this study enables a comprehensive assessment of students’ professional skills, practical capabilities, and innovative thinking. These reforms have increased the employment rate of cybersecurity graduates to over 90%, providing a replicable solution to China’s talent shortage. The research outcomes offer valuable insights for discipline development under engineering education accreditation and contribute to implementing sustainable development concepts in higher education. Full article

This paper applies a multi-level social network analysis to examine Aragón’s innovation ecosystem, focusing on a decade of competitive public projects (2014–2023) aligned with the region’s Smart Specialisation Strategy (S3) 2021–2027. By mapping and weighting the participation of regional entities across regional, national, and European calls, the study uncovers how all types of local actors organise themselves around key specialisation areas. Moreover, a comparative benchmark is introduced by analysing more than 33,000 Horizon 2020 and Horizon Europe initiatives without Aragonese partners, revealing how to fill structural gaps and enrich the regional ecosystem through international collaboration. Results show strong funding concentration in four fields—Energy, Health, Agri-Food, and Advanced Technologies—while other historically strategic areas like Hydrogen and Water remain underrepresented. Although leading institutions (UNIZAR, CIRCE, ITA, AITIIP) play central roles in connecting academia and industry, direct collaboration among them is limited, pointing to missed synergies. Expanding previous SNA-based assessments, this study introduces a diagnostic tool to guide policy, proposing targeted actions such as challenge-driven calls, dedicated support programs, and cross-border consortia with top EU partners. Applied to two contrasting specialisation areas, the method offers sector-specific recommendations, helping policymakers align Aragón’s innovation capabilities with EU priorities and strengthen its position in both established and emerging domains. Full article

Ensuring sustainable food systems is an urgent global priority as populations grow and environmental pressures mount. Technological innovations such as genetic engineering (GE) and nanotechnology (nano) have been promoted as promising pathways for achieving greater sustainability in agriculture and food production. Yet, the sustainability of these technologies is not defined by technical performance alone; it hinges on how they are perceived by key stakeholders and how well they align with broader societal values. This study addresses the critical question of how expert stakeholders evaluate the sustainability of GE and nano-based food and agriculture (agrifood) products. Using a multi-method online platform, we engaged 42 experts across academia, government, industry, and NGOs in the United States to assess six real-world case studies—three using GE and three using nano—across ten different dimensions of sustainability. We show that nano-based products were consistently rated more favorably than their GE counterparts in terms of environmental, economic, and social sustainability, as well as across ethical and societal dimensions. Like prior studies, our results reveal that stakeholders see meaningful distinctions between nanotechnology and biotechnology, likely due to underlying value-based concerns about animal welfare, perceived naturalness, or corporate control of agrifood systems. The fruit coating and flu vaccine—both nano-enabled—received the most positive ratings, while GE mustard greens and salmon were the most polarizing. These results underscore the importance of incorporating stakeholder perspectives in technology assessment and innovation governance. These results also suggest that responsible innovation efforts in agrifood systems should prioritize communication, addressing meaningful societal needs, and the contextual understanding of societal values to build trust and legitimacy. Full article

This study builds on Davis’ TAM by integrating environmental and psychological variables relevant to AI medical diagnostics. This study developed a mathematical theoretical model called the “AI medical diagnosis-acceptance evaluation model” (AMD-AEM) to better understand acceptance behavior intention. Using mathematical modeling, we established reflective measurement model indicators and structural equation relationships, where linear structural equations illustrate the interactions among latent variables. In 2025, we collected empirical data from 2380 patients and medical staff who have experience with AI diagnostic systems in teaching hospitals in central Taiwan. Smart PLS 3 was employed to validate the AMD-AEM model. The results reveal that perceived usefulness (PU) and information quality (IQ) are the primary predictors of acceptance behavior intention (ABI). Additionally, perceived ease of use (PE) indirectly influences ABI through PU and attitude toward use (ATU). AI emotional perception (AEP) notably shows a significant positive relationship with ATU, highlighting that warm and positive human–AI interactions are crucial for user acceptance. IQ was identified as a mediating variable, with variance accounted for (VAF) coefficient analysis confirming its complete mediation effect on the path from ATU to ABI. This indicates that information quality enhances user attitudes and directly increases acceptance behavior intention. The AMD-AEM model demonstrates an excellent fit, providing valuable insights for academia and the healthcare industry. Full article

Small Language Models (SLMs) have emerged as a critical area of study within natural language processing, attracting growing attention from both academia and industry. This systematic literature review provides a comprehensive and reproducible analysis of recent developments and advancements in SLMs post-2023. Drawing on 70 English-language studies published between January 2023 and January 2025, identified through Scopus, IEEE Xplore, Web of Science, and ACM Digital Library, and focusing primarily on SLMs (including those with up to 7 billion parameters), this review offers a structured overview of the current state of the art and potential future directions. Designed as a resource for researchers seeking an in-depth global synthesis, the review examines key dimensions such as publication trends, visual data representations, contributing institutions, and the availability of public datasets. It highlights prevailing research challenges and outlines proposed solutions, with a particular focus on widely adopted model architectures, as well as common compression and optimization techniques. This study also evaluates the criteria used to assess the effectiveness of SLMs and discusses emerging de facto standards for industry. The curated data and insights aim to support and inform ongoing and future research in this rapidly evolving field. Full article

Agrivoltaic (Agri-PV) systems face the critical challenge of balancing photovoltaic energy generation with crop productivity, yet systematic approaches to quantifying the trade-offs between these objectives remain scarce. In this study, we identify nine essential design indicators: panel tilt angle, elevation, photovoltaic coverage ratio, shading factor, land equivalent ratio, photosynthetically active radiation (PAR) utilization, crop yield stability index, water use efficiency, and return on investment. We introduce a novel dual matrix Analytic Hierarchy Process (AHP) to evaluate their relative significance. An international panel of eighteen Agri-PV experts, encompassing academia, industry, and policy, provided pairwise comparisons of these indicators under two objectives: maximizing annual energy yield and sustaining crop output. The high consistency observed in expert responses allowed for the derivation of normalized weight vectors, which form the basis of two Weighted Influence Matrices. Analysis of Total Weighted Influence scores from these matrices reveal distinct priority sets: panel tilt, coverage ratio, and elevation are most influential for energy optimization, while PAR utilization, yield stability, and elevation are prioritized for crop productivity. This methodology translates qualitative expert knowledge into quantitative, actionable guidance, clearly delineating both synergies, such as the mutual benefit of increased elevation for energy and crop outcomes, and trade-offs, exemplified by the negative impact of high photovoltaic coverage on crop yield despite gains in energy output. By offering a transparent, expert-driven decision-support tool, this framework enables practitioners to customize Agri-PV system configurations according to local climatic, agronomic, and economic contexts. Ultimately, this approach advances the optimization of the food energy nexus and supports integrated sustainability outcomes in Agri-PV deployment. Full article

Graph analytics has grown increasingly popular as a model for data analytics across a variety of domains. This has prompted an emergence of solutions for large-scale graph analytics, many of which integrate user-facing domain-specific languages (DSLs) to support graph processing operations. These DSLs fall into two categories: query-based DSLs for graph-pattern matching and graph algorithm DSLs. While graph query DSLs are now standardized, research on DSLs for algorithmic graph processing remains fragmented and lacks a cohesive framework. To address this gap, we conduct a systematic literature review of algorithmic graph processing DSLs aimed at large-scale graph analytics. Our findings reveal the prevalence of property graphs (with 60% of surveyed DSLs explicitly adopting this model), as well as notable similarities in syntax and features. This allows us to identify a common template that can serve as the foundation for a standardized graph algorithm model, improving portability and unifying design between different DSLs and graph analytics toolkits. We additionally find that, despite achieving remarkable performance and scalability, only 20% of surveyed DSLs see real-life adoption. Incidentally, all DSLs for which user documentation is available are developed as part of academia–industry collaborations or in fully industrial contexts. Based on these results, we provide a comprehensive overview of the current research landscape, along with a roadmap of recommendations and future directions to enhance reusability and interoperability in large-scale graph analytics across industry and academia. Full article