Search Results (128)

Liver fibrosis, a critical pathological feature of chronic liver injury, is closely associated with macrophage-mediated inflammatory responses and metabolic reprogramming. Blocking the fibrosis process will be beneficial to the treatment and recovery of the disease. Liver macrophages are a remarkably heterogeneous population of immune cells that play multiple functions in homeostasis and are central to liver fibrosis. Glycolysis-mediated macrophage metabolic reprogramming leads to an increase in the proportion of M1 macrophages and the release of pro-inflammatory cytokines. The present study aimed to investigate the therapeutic effect and mechanism of acid B (SAL B) against carbon tetrachloride (CCl₄)-induced liver fibrosis. Here, we demonstrate that SAL B reduced the production of inflammatory factors in CCl₄-induced liver fibrosis. Mechanistically, SAL B increased the expression of migration inhibitor 1 (MIG1) by inhibiting DNMT1-mediated methylation of the MIG1 promoter. Subsequently, MIG1 reduced the transcription of lactate dehydrogenase A (LDHA) and hexokinase 2 (HK2) which blocked glycolysis-mediated macrophage M1 polarization. In summary, our results suggested that SAL B is a promising intervention for ameliorating liver fibrosis. Full article

The reaction of PtCl₂ with a PNN type ligand dppmaphen (N-(diphenylphosphanylmethyl)-2-amino-1,10-phenanthroline) yielded a new Pt(II) complex [Pt(dppmaphen)Cl]Cl·H₂O (1). Upon excitation at 370 nm, compound 1 emits yellow phosphorescence at 539 and 576 nm at room temperature. Exposure of compound 1 to MeOH vapor induces a shift in its emission to 645 nm, which can be attributed to the substitution of MeOH molecules for H₂O, resulting in the disruption and reorganization of weak interactions in 1. This response is selective for MeOH and, to a lesser extent, EtOH, the orange photoluminescence recovered in air. The emission change of 1 was reversible and visible to the naked eye. Full article

Sodium metal is a promising anode material for sodium metal batteries (SMBs) due to its high theoretical specific capacity and low electrochemical potential. However, its practical implementation is severely limited by dendrite formation, which causes short circuits and safety issues. Here, we introduce a separator modification strategy using Ag nanoparticles decorated with two-dimensional diamane on a commercial polypropylene (PP) substrate (Ag-diamane/PP) to enhance the performance of sodium metal anodes (SMAs). The synergistic effect between the sodiophilic Ag nanoparticles and the diamane network not only accelerates Na⁺ transport through the modified separator but also reduces interfacial resistance. This dendrite-suppression effect was systematically validated using in situ optical microscopy and ex situ scanning electron microscopy. Symmetric Na||Na cells incorporating the Ag-diamane/PP separator exhibit exceptional cycling stability, maintaining more than 3800 h of operation at 2 mA cm⁻² with a capacity of 1 mAh cm⁻². Furthermore, a full-cell configuration with a Na₃V₂(PO₄)₃@C cathode, Ag-diamane/PP separator, and Na metal anode delivers a high reversible capacity of 94.35 mAh g⁻¹ and stable cycling for 270 cycles. This work highlights the Ag-diamane/PP separator as a promising solution for advancing dendrite-free SMBs with long-term cycling stability and high energy density. Full article

A binuclear Au-P complex [Au₂(2-bdppmapy)₂](PF₆)₂ (1) was synthesised by the reaction of 2-bdppmapy (N,N′-bis-(diphenylphosphanylmethyl-2-aminopyridine) with AuCN and [Cu(MeCN)₄]PF₆. The solid phase of 1 emitted bright yellow phosphorescence at λ_max = 580 nm under UV excitation (QY = 4.41%, τ = 1.88 μs), which shifted to green (λ_max = 551 nm, QY = 5.73%) after being pressurised under 5 MPa. This colour change was recoverable upon exposure to CH₂Cl₂ vapor. Similar mechanochromic photoluminescence behaviour was observed after grinding the crystals of 1. A filter paper impregnated with 1 demonstrated recyclable write/erase functionality for encrypted information transfer. Full article

Non-coding RNAs (ncRNAs) are a class of RNAs that largely lack the capacity to encode proteins. They have garnered significant attention due to their central regulatory functions across numerous cellular and physiological processes at transcriptional, post-transcriptional, and translational levels. Over the past decade, ncRNA-based therapies have gained considerable attention in the diagnosis, treatment, and prevention of diseases, and many studies have revealed a significant relationship between ncRNAs and diseases. At the same time, due to their tissue specificity, an increasing number of projects have focused on the application of ncRNAs as biomarkers in diseases, as well as the design and development of novel ncRNA-based vaccines and therapies for clinical use. These ncRNAs may also drive research into the potential molecular mechanisms and complex pathogenesis of related diseases. However, new biomarkers need to be validated for their clinical effectiveness. Additionally, to produce safe and stable RNA products, factors such as purity, precise dosage, and effective delivery methods must be ensured to achieve optimal bioactivity. These challenges remain key issues in the clinical application of ncRNAs. This review summarizes the prospects of ncRNAs as potential biomarkers, as well as the current research status and clinical applications of ncRNAs in therapies and vaccines, and discusses the challenges and expectations of ncRNAs in disease diagnosis and drug therapy. Full article

Layered sodium trititanate (Na₂Ti₃O₇) is a promising anode material for sodium-ion batteries due to its suitable charge/discharge plateaus, cost-effectiveness, and eco-friendliness. However, its slow Na⁺ diffusion kinetics, poor electron conductivity, and instability during cycling pose significant challenges for practical applications. To address these issues, we developed a template-free method to synthesize Na₂Ti₃O₇-C hollow microspheres. The synthesis began with polymerization-induced colloid aggregation to form a TiO₂–urea–formaldehyde (TiO₂-UF) precursor, which was then subjected to heat treatment to induce inward crystallization, creating hollow cavities within the microspheres. The hollow structure, combined with a conductive carbon matrix, significantly enhanced the cycling performance and rate capability of the material. When used as an anode, the Na₂Ti₃O₇-C hollow microspheres exhibited a high reversible capacity of 188 mAh g⁻¹ at 0.2C and retained 169 mAh g⁻¹ after 500 cycles. Additionally, the material demonstrated excellent rate performance with capacities of 157, 133, 105, 77, 62, and 45 mAh g⁻¹ at current densities of 0.5, 1, 2, 5, 10, and 20C, respectively. This innovative approach provides a new strategy for developing high-performance sodium-ion battery anodes and has the potential to significantly advance the field of energy storage. Full article

The risk of forest diseases is on the rise due to climate change and the consequential increase in extreme weather events, which disrupt the balance between pathogen, hosts, and the environment. This study analyzed two consecutive outbreaks of canker disease in Betula alnoides (Buch.-Ham. ex D. Don 1825) plantations and the temperature and precipitation changes in 2019 and 2020 in the northern Guangdong Province, China, to understand the impact of meteorological factors on disease outbreaks. We also examined the growth and mortality of B. alnoides with different gap sizes and reserved densities to explore how stand structure affects disease resistance in B. alnoides individuals. In both years, the disease outbreaks were preceded by periods of increasing heat and significant drops in humidity, as indicated by the z-score and relative similarity index. The mortality of B. alnoides due to canker disease was negatively correlated with seedling growth, which was optimized at a moderate reserved density of 225–300 trees per hectare in the upper layer and a gap size of 500–750 m². The findings suggest that closely monitoring meteorological changes and implementing afforestation with a well-managed upper layer can help mitigate the impact of canker disease in subtropical regions, particularly in the context of climate change. Further long-term studies with a more systemic approach are needed to assess the effects of thinning and gap creation in forest management. Full article

As modern society increasingly emphasizes quality of life, historic districts face the challenge of balancing the preservation of traditional culture with the integration of urban development. Many historic districts today struggle with low vitality and limited visitor engagement. By adopting sustainable development strategies, such as promoting tourism, these districts have the potential to enhance economic vitality. This study explores the spatial morphological characteristics of the ShuiXiLin Historic District (SHD) in Fuzhou, using spatial syntax theory and tools within the framework of sustainable urban renewal. The study proposes three strategies for the district: (1) enhancing connectivity positively influences the public experience within the SHD; (2) strengthening the district’s primary axis amplifies its influence across the area; (3) implementing protective reuse of historical buildings and improving service facilities can significantly enhance the district’s vitality. Through theoretical analysis and a review of existing research, this study proposes revitalization strategies aimed at formulating sustainable development plans for the district. These recommendations are intended to offer valuable insights for urban renewal projects and provide theoretical support for planning decisions related to the vitality of historic districts. This research illustrates the effective use of spatial syntax in historic districts, offering a robust method to evaluate and enhance the spatial structure and vitality of heritage areas. It supports sustainable development by integrating preservation with modern needs, ensuring a balance between conservation and urban growth. Full article

Polymeric hydrogel materials have excellent electrical conductivity and mechanical properties and will be potentially used in wearable electronic devices, soft robotics, and medical treatment. In this paper, a PAA-Fe³⁺-IL ionohydrogel (poly(acrylic acid)-Fe³⁺-ionic liquid ionohydrogel) with excellent mechanical and conductive properties is prepared by simple free radical polymerization. The presence of metal-ligand crosslinking within the ionohydrogel improves the mechanical properties of the hydrogel. When the IL content is 10 wt%, it has the maximum tensile strength and strain. When the ferric ion concentration is 0.3 mol%, the maximum tensile strength is 495.09 kPa. When the ferric ion concentration is 0.1 mol%, the maximum strain is 1151.35%. The tensile behavior of the ionohydrogels is quantitatively analyzed by the viscoelastic model. In addition, free metal ions and anions and cations in IL endowed the hydrogel with a conductivity of 1.48 S/m and a strain sensitivity of 8.04. Thus, the PAA-Fe³⁺-IL ionohydrogel can be successfully used as a humidity sensor due to the hydrophilic ionic liquid, which can increase the conductivity of the hydrogel by absorbing water. The physical crosslinking density inside the hydrogel is much higher than the chemical crosslinking density, which causes hydrogel dissolution in deionized water by swelling and is conducive to the recycling of the hydrogel. This is a promising material for use in intelligent wearable electronics and as a humidity sensor. Full article

Background: Uricase, or urate oxidase (Uox) is a key enzyme in uric acid (UA) metabolism and has been applied in clinical treatment of human hyperuricemia (HUA). However, the current clinically applied uricases, despite their potent urate-lowering capacity, tend to form anti-drug antibodies because of their immunogenicity, leading to increased risk of anaphylaxis, faster drug clearance and reduced or even complete loss of therapeutic effect, limiting their clinical application. In this study, we constructed engineered macrophages that stably expressed uricase, which might serve as a promising alternative to the direct injection of uricases. Materials and Methods: Engineered macrophages RAW264.7 cells were injected intravenously to treat hyperuricemic KM mice. Serum uric acid and bio-indicators for renal and hepatic functions were detected by an automatic biochemical analyzer; inflammatory cytokines were determined by ELISA; the livers and kidneys of the mice were sectioned for histological examination. Results: The uricase-expressing macrophages reduced UA levels from 300 ± 1.5 μmol/L to 101 ± 8.3 μmol/L in vitro. And in an HUA mouse model established by gavage with yeast extract, intravenous injection of the engineered macrophages could reduce the serum uric acid (sUA) of mice to normal level on the 14th day of modeling, with a decrease of 48.6%, and the urate-lowering effect was comparable to that of the first-line clinical drug allopurinol. In terms of safety, engineered macrophages did not cause liver or kidney dysfunction in mice, nor did they induce systemic immune response. Conclusions: Using macrophages as a chassis to deliver uricase might be a new, safe and effective strategy for the treatment and control of hyperuricemia. Full article

The lateral organ boundaries domain (LBD) genes, as the plant-specific transcription factor family, play a crucial role in controlling plant architecture and stress tolerance. However, the functions of AhLBD genes in the peanut plant (Arachis hypogea L.) remain unclear. In this study, 73 AhLBDs were identified in the peanut plant and divided into three groups by phylogenetic tree analysis. Gene structure and conserved protein motif analysis supported the evolutionary conservation of AhLBDs. Tandem and segment duplications contributed to the expansion of AhLBDs. The evolutionary relationship analysis of LBD gene family between A. hypogaea and four other species indicated that the peanut plant had a close relationship with the soybean plant. AhLBDs played a very important role in response to growth and development as well as abiotic stress. Furthermore, gene expression profiling and real-time quantitative qRT-PCR analysis showed that AhLBD16, AhLBD33, AhLBD67, and AhLBD72 were candidate genes for salt stress, while AhLBD24, AhLBD33, AhLBD35, AhLBD52, AhLBD67, and AhLBD71 were candidate genes for drought stress. Our subcellular localization experiment revealed that AhLBD24, AhLBD33, AhLBD67, and AhLBD71 were located in the nucleus. Heterologous overexpression of AhLBD33 and AhLBD67 in Arabidopsis significantly enhanced tolerance to salt stress. Our results provide a theoretical basis and candidate genes for studying the molecular mechanism for abiotic stress in the peanut plant. Full article

After transporting oil with a mobile pipeline, it is necessary to empty the oil within the pipeline. A common method is to inject water into the inlet to push the oil out. However, due to the effects of buoyancy and surface tension, the oil within the pipeline tends to accumulate at the elevated section, forming a stagnant oil layer, which will limit the evacuation efficiency. Based on the multiphase flow theory, a hydrodynamic model of oil–water flow was utilized to describe the pressure distribution and the thickness of the stagnant oil layer within the pipeline. A numerical model for oil-carrying water flow in a downward-inclined mobile pipeline was established, and the model was solved under given initial and boundary conditions to obtain the characteristics of the oil-carrying water flow within the pipeline. The calculation results indicate that the initial water phase velocity has a promoting effect on the oil-carrying capacity of water flow. The pipe diameter is negatively correlated with the capacity. The initial thickness of the oil is not directly related to the capacity but can increase the oil phase front velocity, which can enable the oil phase to be emptied more quickly. When the initial water phase velocity is lower than the critical water phase velocity, an increase in the inclination angle will weaken the capacity of water flow to carry oil. Conversely, when the velocity of the initial water phase is higher than the critical water phase velocity, an increase in the inclination angle will enhance the capacity. Full article

Styrax japonicus is a medicinal and ornamental shrub belonging to the Styracaceae family. To explore the diversity and characteristics of the chloroplast genome of S. japonicus, we conducted sequencing and comparison of the chloroplast genomes of four naturally distributed S. japonicus. The results demonstrated that the four chloroplast genomes (157,914–157,962 bp) exhibited a typical quadripartite structure consisting of a large single copy (LSC) region, a small single copy (SSC) region, and a pair of reverse repeats (IRa and IRb), and the structure was highly conserved. DNA polymorphism analysis revealed that three coding genes (infA, psbK, and rpl33) and five intergene regions (petA-psbJ, trnC-petN, trnD-trnY, trnE-trnT, and trnY-trnE) were identified as mutation hotspots. These genetic fragments have the potential to be utilized as DNA barcodes for future identification purposes. When comparing the boundary genes, a small contraction was observed in the IR region of four S. japonicus. Selection pressure analysis indicated positive selection for ycf1 and ndhD. These findings collectively suggest the adaptive evolution of S. japonicus. The phylogenetic structure revealed conflicting relationships among several S. japonicus, indicating divergent evolutionary paths within this species. Our study concludes by uncovering the genetic traits of the chloroplast genome in the differentiation of S. japonicus variety, offering fresh perspectives on the evolutionary lineage of this species. Full article

As an important part of die steels, hot-work die steels are mainly used to manufacture molds made of solid metal or high-temperature liquid metal from heating to recrystallization temperature. In view of the requirements for mechanical properties and service life for hot-work die steel, it is conducive to improve the thermal fatigue resistance, wear resistance, and oxidation resistance of hot work die steel. In this review, the main failure modes of hot-work die steel were analyzed. Four traditional methods of strengthening and toughening die steel were summarized, including optimizing alloying elements, electroslag remelting, increasing the forging ratio, and heat treatment process enhancement. A new nano-strengthening method was introduced that aimed to refine the microstructure of hot-work abrasive steel and improve its service performance by adding nanoparticles into molten steel to achieve uniform dispersion. This review provides an overview to improve the service performance and service life of hot work die steel. Full article

In adverse foggy weather conditions, images captured are adversely affected by natural environmental factors, resulting in reduced image contrast and diminished visibility. Traditional image dehazing methods typically rely on prior knowledge, but their efficacy diminishes in practical, complex environments. Deep learning methods have shown promise in single-image dehazing tasks, but often struggle to fully leverage depth and edge information, leading to blurred edges and incomplete dehazing effects. To address these challenges, this paper proposes a deep-guided bilateral grid feature fusion dehazing network. This network extracts depth information through a dedicated module, derives bilateral grid features via Unet, employs depth information to guide the sampling of bilateral grid features, reconstructs features using a dedicated module, and finally estimates dehazed images through two layers of convolutional layers and residual connections with the original images. The experimental results demonstrate the effectiveness of the proposed method on public datasets, successfully removing fog while preserving image details. Full article