Topics Board

Topics Board Editors (9)

Prof. Dr. Cristian Dudescu
Department of Mechanical Engineering, Technical University of Cluj-Napoca, Cluj-Napoca 400287, Romania
Interests: experimental mechanics; optical methods of engineering analysis; material testing and characterization; metamaterials; structural analysis of microstructures; finite element modeling
Dr. Basuraj Bhowmik
Dynamical Systems and Risk Laboratory, School of Mechanical and Materials Engineering, University College Dublin, Dublin 4, Ireland
Interests: real-time structural health monitoring; damage detection; modal identification; vibration control; scour monitoring; probabilistic modeling; finite element modeling; machine learning; data-driven methods; sensor optimization
Prof. Dr. Natalya Kizilova
Institute of Aeronautics and Applied Mechanics, Faculty of Power andAeronautical Engineering, Warsaw University of Technology, 00-635 Warsaw, Poland
Interests: fluid dynamics; rheology; biomechanics; micro/nanomechanics; micro/nanofluidics
Dr. Adil El Baroudi
LAMPA, Arts et Metiers Institute of Technology, 49035 Angers, France
Interests: fluid-structure interaction; microfluidics and nanofluidics; mechanical engineering; bioengineering; non destructive testing; analytical modeling; finite element modeling
Prof. Dr. Mohamed Guessasma
Laboratoire des technologies innovantes, Université de Picardie Jules Verne, 80025 Amiens, France
Interests: discrete element method (DEM); contact interface; DEM-FEM coupling approach; multiscale and multi-physics modelling; damage modelling using DEM; digital twin of ball bearings
Dr. Dorin Radu
Department of Civil Engineering, Universitatea Transilvania Brasov, Braşov, Romania
Interests: structural integrity; fracture mechanics; steel structures; fatigue; dynamic loading
Dr. Shahram Karami
Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC 3800, Australia
Interests: high-fidelity numerical simulation of turbulent flows; combustion modelling; supersonic flows; reduced-order models for turbulent flows
Dr. Mohammadreza Hirmand
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
Interests: computational mechanics; fracture mechanics; numerical methods; energy methods and mathematical optimization; contact-impact problems; hydraulic fracturing modelling; cold spray additive manufacturing modelling
Dr. Saeed Mouloodi
Department of Mechanical Engineering, University of Melbourne, Melbourne, VIC 3010, Australia
Interests: mechanical properties; stress analysis; mechanics of materials; damage mechanics; computational solid mechanics; finite element analysis; nanomechanics; machine learning; artificial neural networks; biomechanical analysis
Back to TopTop