Buildings | Top 10 Cited Papers in 2021 in the Section “Building Materials, and Repair & Renovation”

1. “Compressive Strength Prediction via Gene Expression Programming (GEP) and Artificial Neural Network (ANN) for Concrete Containing RCA”
by Ayaz Ahmad, Krisada Chaiyasarn, Furqan Farooq, Waqas Ahmad, Suniti Suparp and Fahid Aslam
Buildings 2021, 11(8), 324; https://doi.org/10.3390/buildings11080324
Full text available online: http://www.mdpi.com/2075-5309/11/8/324

2. “Fire Resistance Behaviour of Geopolymer Concrete: An Overview”
by Salmabanu Luhar, Demetris Nicolaides and Ismail Luhar
Buildings 2021, 11(3), 82; https://doi.org/10.3390/buildings11030082
Full text available online: http://www.mdpi.com/2075-5309/11/3/82

3. “Mechanical Behavior and Frost-Resistance of Alkali-Activated Cement Concrete with Blended Binder at Ambient Curing Condition”
by Biruk Hailu Tekle, Klaus Holschemacher, Philipp Löber and Björn Heiden
Buildings 2021, 11(2), 52; https://doi.org/10.3390/buildings11020052
Full text available online: http://www.mdpi.com/2075-5309/11/2/52

4. “Utilization of Corn Cob Ash as Fine Aggregate and Ground Granulated Blast Furnace Slag as Cementitious Material in Concrete”
by Naraindas Bheel, Montasir Osman Ahmed Ali, Yue Liu, T. Tafsirojjaman, Paul Awoyera, Nadhim Hamah Sor and Lenin Miguel Bendezu Romero
Buildings 2021, 11(9), 422; https://doi.org/10.3390/buildings11090422
Full text available online: http://www.mdpi.com/2075-5309/11/9/422

5. “Performance of Steel Fiber-Reinforced Alkali-Activated Slag-Fly Ash Blended Concrete Incorporating Recycled Concrete Aggregates and Dune Sand”
by Hilal El-Hassan, Abdalla Hussein, Jamal Medljy and Tamer El-Maaddawy
Buildings 2021, 11(8), 327; https://doi.org/10.3390/buildings11080327
Full text available online: http://www.mdpi.com/2075-5309/11/8/327

6. “Effect of Needle Type, Number of Layers on FPAFC Composite against Low-Velocity Projectile Impact”
by Nandhu Prasad, Gunasekaran Murali, Sallal R. Abid, Nikolai Vatin, Roman Fediukand and Mugahed Amran
Buildings 2021, 11(12), 668; https://doi.org/10.3390/buildings11120668
Full text available online: http://www.mdpi.com/2075-5309/11/12/668

7. “Resistance of an Optimized Ultra-High Performance Fiber Reinforced Concrete to Projectile Impact”
by Anna L. Mina, Michael F. Petrou and Konstantinos G. Trezos
Buildings 2021, 11(2), 63; https://doi.org/10.3390/buildings11020063
Full text available online: http://www.mdpi.com/2075-5309/11/2/63

8. “Properties of Cementitious Materials with Recycled Aggregate and Powder Both from Clay Brick Waste”
by Huixia Wu, Jianzhuang Xiao, Chaofeng Liang and Zhiming Ma
Buildings 2021, 11(3), 119; https://doi.org/10.3390/buildings11030119
Full text available online: http://www.mdpi.com/2075-5309/11/3/119

9. “Effect of Amount of Fibre and Damage Level on Service Life of SFR Recycled Concrete in Aggressive Environment”
by Petr Lehner and Marie Horňáková
Buildings 2021, 11(10), 489; https://doi.org/10.3390/buildings11100489
Full text available online: http://www.mdpi.com/2075-5309/11/10/489

10. “Effect of Amount of Fibre and Damage Level on Service Life of SFR Recycled Concrete in Aggressive Environment”
by Freja Nygaard Rasmussen, Camilla Ernst Andersen, Alexandra Wittchen, Rasmus Nøddegaard Hansen and Harpa Birgisdóttir
Buildings 2021, 11(8), 362; https://doi.org/10.3390/buildings11080362
Full text available online: http://www.mdpi.com/2075-5309/11/8/362