Next Article in Journal
Optimization of Delivery Allocation for Enhanced Fleet Utilization and Trip Minimization: A Case Study from an Indonesian Manufacturing Company
Previous Article in Journal
Evaluating the Influence of Missing Data from the Crop Vegetation Index Time Series on Copernicus HR-VPP Phenological Products
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Editorial

Statement of Peer Review †

by
Noor Hanita Abdul Majid
1,
Agus Dwi Anggono
2,*,
Waluyo Adi Siswanto
1,
Tri Widodo Besar Riyadi
2,
Nur Rahmawati Syamsiyah
3,
Afif Faishal
2 and
Mohammad Sukri Mustapa
4
1
Institute of Strategic Science and Technology, Universiti Muhammadiyah Malaysia (UMAM), Bangunan Wisma MAIPs, Blok S1, Kompleks Desa Siswa, Uniciti Alam, Padang Besar 02100, Perlis, Malaysia
2
Mechanical Engineering Department, Universitas Muhammadiyah Surakarta (UMS), Jl. Ahmad Yani No. 157 Pabelan, Kartasura, Sukoharjo 57169, Jawa Tengah, Indonesia
3
Architecture Department, Universitas Muhammadiyah Surakarta (UMS), Jl. Ahmad Yani No. 157 Pabelan, Kartasura, Sukoharjo 57169, Jawa Tengah, Indonesia
4
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia (UTHM), Parit Raja, Batu Pahat 86400, Johor, Malaysia
*
Author to whom correspondence should be addressed.
All papers published in this volume are presented at the 8th Mechanical Engineering, Science and Technology International Conference (MEST 2024), Padang Besar, Perlis, Malaysia, 11–12 December 2024.
Eng. Proc. 2025, 84(1), 99; https://doi.org/10.3390/engproc2025084099
Published: 19 June 2025
In submitting conference proceedings to Engineering Proceedings, the Volume Editors of the proceedings would like to certify to the publisher that all papers published in this volume have been subjected to peer review by the designated expert referees and were administered by the Volume Editors strictly following the policies announced on the conference website [1].
The whole process was supervised by the conference committee and the Volume Editors and adhered to the professional and scientific standards expected of a proceedings journal published by MDPI and complied with the peer review policy and guidelines of Engineering Proceedings, which can be found at the following link: https://www.mdpi.com/journal/engproc/instruction_for_conference_organizers. The review reports were checked and archived by the Editorial Office of Engineering Proceedings.
  • Type of peer review: single-blind
  • Conference submission management system: https://mest.umam.edu.my/2024/ (accessed on 18 June 2025)
  • Number of submissions received: 145
  • Number of submissions sent for review: 145
  • Number of submissions accepted: 102
  • Acceptance rate (number of submissions accepted/number of submissions received): 70%
  • Average number of reviews per paper: 2
  • Total number of reviewers involved: 79
  • For further details regarding the review procedure, please see Figure 1.
Figure 1. Review procedure.
Figure 1. Review procedure.
Engproc 84 00099 g001

Conflicts of Interest

The authors declare no conflicts of interest.

Reference

  1. Publication Policy Overview of the MEST Conferences. Available online: https://mest.umam.edu.my/2024/content/8th-mechanical-engineering-science-and-technology-mest2024 (accessed on 18 June 2025).
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Majid, N.H.A.; Anggono, A.D.; Siswanto, W.A.; Riyadi, T.W.B.; Syamsiyah, N.R.; Faishal, A.; Mustapa, M.S. Statement of Peer Review. Eng. Proc. 2025, 84, 99. https://doi.org/10.3390/engproc2025084099

AMA Style

Majid NHA, Anggono AD, Siswanto WA, Riyadi TWB, Syamsiyah NR, Faishal A, Mustapa MS. Statement of Peer Review. Engineering Proceedings. 2025; 84(1):99. https://doi.org/10.3390/engproc2025084099

Chicago/Turabian Style

Majid, Noor Hanita Abdul, Agus Dwi Anggono, Waluyo Adi Siswanto, Tri Widodo Besar Riyadi, Nur Rahmawati Syamsiyah, Afif Faishal, and Mohammad Sukri Mustapa. 2025. "Statement of Peer Review" Engineering Proceedings 84, no. 1: 99. https://doi.org/10.3390/engproc2025084099

APA Style

Majid, N. H. A., Anggono, A. D., Siswanto, W. A., Riyadi, T. W. B., Syamsiyah, N. R., Faishal, A., & Mustapa, M. S. (2025). Statement of Peer Review. Engineering Proceedings, 84(1), 99. https://doi.org/10.3390/engproc2025084099

Article Metrics

Back to TopTop