Quantum Transport Simulation of High-Power 4.6-μm Quantum Cascade Lasers
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA
Authors to whom correspondence should be addressed.
Received: 4 May 2016 / Revised: 5 June 2016 / Accepted: 7 June 2016 / Published: 10 June 2016
PDF [640 KB, uploaded 16 June 2016]
We present a quantum transport simulation of a 4.6-
m quantum cascade laser (QCL) operating at high power near room temperature. The simulation is based on a rigorous density-matrix-based formalism, in which the evolution of the single-electron density matrix follows a Markovian master equation in the presence of applied electric field and relevant scattering mechanisms. We show that it is important to allow for both position-dependent effective mass and for effective lowering of very thin barriers in order to obtain the band structure and the current-field characteristics comparable to experiment. Our calculations agree well with experiments over a wide range of temperatures. We predict a room-temperature threshold field of
kV/cm and a characteristic temperature for threshold-current-density variation of
. We also calculate electronic in-plane distributions, which are far from thermal, and show that subband electron temperatures can be hundreds to thousands of degrees higher than the heat sink. Finally, we emphasize the role of coherent tunneling current by looking at the size of coherences, the off-diagonal elements of the density matrix. At the design lasing field, efficient injection manifests itself in a large injector/upper lasing level coherence, which underscores the insufficiency of semiclassical techniques to address injection in QCLs.
This is an open access article distributed under the Creative Commons Attribution License
which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
Jonasson, O.; Mei, S.; Karimi, F.; Kirch, J.; Botez, D.; Mawst, L.; Knezevic, I. Quantum Transport Simulation of High-Power 4.6-μm Quantum Cascade Lasers. Photonics 2016, 3, 38.
Jonasson O, Mei S, Karimi F, Kirch J, Botez D, Mawst L, Knezevic I. Quantum Transport Simulation of High-Power 4.6-μm Quantum Cascade Lasers. Photonics. 2016; 3(2):38.
Jonasson, Olafur; Mei, Song; Karimi, Farhad; Kirch, Jeremy; Botez, Dan; Mawst, Luke; Knezevic, Irena. 2016. "Quantum Transport Simulation of High-Power 4.6-μm Quantum Cascade Lasers." Photonics 3, no. 2: 38.
Show more citation formats
Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.
[Return to top]
For more information on the journal statistics, click here
Multiple requests from the same IP address are counted as one view.