Design and Implementation of a 28-GHz Four-Phase Beam-Steering Antenna Based on a Butler Matrix Network

This paper presents a four-phase beam-steering antenna for 28 GHz wireless communication, targeting the demand for high-efficiency and low-complexity beam-steering solutions in millimeter-wave systems. The proposed design employs a Butler matrix network to achieve multi-directional beam switching while reducing implementation complexity. The antenna is realized using microstrip technology on a printed circuit board (PCB), and the overall architecture consists of a 1 × 4 microstrip antenna array and a 4 × 4 Butler matrix network. Each component is carefully designed and analyzed to ensure optimized performance and proper system balance. The proposed antenna exhibits excellent performance in terms of bandwidth and compact size, while also providing advantages that include low cost, ease of fabrication, and structural simplicity. The beam-steering capability is experimentally verified through far-field measurements. The measurement results indicate that the four beam directions are −38°, −13°, +19°, and +41°, with corresponding gains of 8.79, 9.66, 10.8, and 9.21 dBi, respectively. In addition, a good agreement between the measurement and simulation results is observed, which validates the effectiveness and feasibility of the proposed design.