Next Article in Journal
Crack Propagation and Effect of Mixed Oxides on TGO Growth in Thick La–Gd–YSZ Thermal Barrier Coating
Previous Article in Journal
Study on the Time-Varying Characteristics of Discharge Plasma in Micro-Electrical Discharge Machining
Previous Article in Special Issue
Observation of the Magnetization Reorientation in Self-Assembled Metallic Fe-Silicide Nanowires at Room Temperature by Spin-Polarized Scanning Tunneling Spectromicroscopy
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Coatings
Volume 9
Issue 11
10.3390/coatings9110720
coatings-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Leakage Current Conduction Mechanism of Au-Pt-Ti/ HfO2-Al2O3/n-InAlAs Metal-Oxide-Semiconductor Capacitor under Reverse-Biased Condition

by
He Guan
and
Shaoxi Wang
*
School of Microelectronics, Northwestern Polytechnical University (NPU), Xi’an 710072, China
*
Author to whom correspondence should be addressed.
Coatings 2019, 9(11), 720; https://doi.org/10.3390/coatings9110720
Submission received: 29 August 2019 / Revised: 10 October 2019 / Accepted: 18 October 2019 / Published: 1 November 2019
(This article belongs to the Special Issue Metal-Semiconductor and Insulator-Semiconductor Interfaces)
Browse Figures
Versions Notes

Abstract

:
Au-Pt-Ti/high-k/n-InAlAs metal-oxide-semiconductor (MOS) capacitors with HfO2-Al2O3 laminated dielectric were fabricated. We found that a Schottky emission leakage mechanism dominates the low bias conditions and Fowler–Nordheim tunneling became the main leakage mechanism at high fields with reverse biased condition. The sample with HfO2 (4 m)/Al2O3 (8 nm) laminated dielectric shows a high barrier height ϕB of 1.66 eV at 30 °C which was extracted from the Schottky emission mechanism, and this can be explained by fewer In–O and As–O states on the interface, as detected by the X-ray photoelectron spectroscopy test. These effects result in HfO2 (4 m)/Al2O3 (8 nm)/n-InAlAs MOS-capacitors presenting a low leakage current density of below 1.8 × 10−7 A/cm2 from −3 to 0 V at 30 °C. It is demonstrated that the HfO2/Al2O3 laminated dielectric with a thicker Al2O3 film of 8 nm is an optimized design to be the high-k dielectric used in Au-Pt-Ti/HfO2-Al2O3/InAlAs MOS capacitor applications.

1. Introduction

According to the requirements of high speed, low power dissipation, and low noise application for RF devices used in telecommunication and other modern integrated circuits, increasing interest is focused on new III-V compound devices of InAs/AlSb and InAlAs/InGaAs HEMTs (high-electron mobility transistors), as these devices possess high electron mobility and peak velocity in the channel [1,2,3,4,5]. However, due to the narrow band gap of channels of these HEMTs, the devices suffer from serious current leakage which is considered as the biggest issue of InAs/AlSb and InAlAs/InGaAs HEMTs [6,7]. In this kind of device, InAlAs is most frequently used as the protective layer on the above barrier and as the gate contact semiconductor [1,3], and some reports proposed to deposit a high-k dielectric film on InAlAs, together with the gate electrode, to become a metal-oxide-semiconductor (MOS) capacitor isolated gate structure, in order to effectively suppress the leakage current. HfO2 that presents a high dielectric constant is a popular candidate as the high-k dielectric [8,9,10], however it does not match well with InAlAs and the poor lattice match would degrade its performance [9]; Al2O3 is used frequently as the high-k dielectric as well [10,11], however its dielectric constant is not high enough, and that will lead to a lower EOT (effective oxide thickness) which is not beneficial for reducing device size. For improvement, the HfO2-Al2O3 laminated dielectric layer is proposed, and in this new device structure, a compromised dielectric constant can be achieved and the leakage current can be effectively suppressed [12,13,14]. In our previous paper [13], the physical and electrical performance of the new Au-Pt-Ti/high-k/n-InAlAs MOS capacitors with HfO2-Al2O3 laminated dielectric were studied in detail. However, its leakage current mechanism was not mentioned, and this scheme has been covered in few other papers. To better understand the generation reason of the leakage current of the Au-Pt-Ti/HfO2-Al2O3/n-InAlAs MOS capacitor, we study the leakage current mechanism of the new devices at different bias condition ranges in detail. As InAs/AlSb HEMTs and InAlAs/InGaAs HEMTs work under negative gate voltage bias conditions, we studied the reverse-bias leakage current mechanism in this paper as in the case of a real application.

2. Experiment

The device structure from bottom to top is a 350 μm semi-insulating InP substrate, a 200 nm InP buffer layer, a 500 nm Si-doped In0.5Al0.5As semiconductor layer with a doping concentration of 1 × 1017 cm−3 [15], a 12 nm oxide layer with Al2O3-HfO2 dielectrics, and a metal with structure of Ti (20 nm)/Pt (20 nm)/Au (200 nm). The detailed schematic layer structures of the prepared sample can be found in our previous published paper [14]. In order to identify the impact of the thickness of the Al2O3 inserting layer, we manufactured two kinds of samples with an oxide layer of HfO2 (4 nm)/Al2O3 (8 nm) laminated dielectrics (marked as Sample #1), and HfO2 (8 nm)/Al2O3 (4 nm) laminated dielectrics (marked as Sample #2), respectively. The detailed fabrication process is listed in Table 1 [16,17,18,19,20].

3. Measurement and Discussion

The leakage current measurement of the Au-Pt-Ti/HfO2-Al2O3/InAlAs MOS-capacitors under reversed bias condition is shown in Figure 1. It is found that the leakage current density J achieves a significant low value below 10−6 A/cm2 in the bias voltage Vg ranges from −3 to 0 V at a temperature of 30 °C for the both Sample #1 and #2. In particular, Sample #1 shows a much lower leakage current, below 1.8 × 10−7 A/cm2 from −3 to 0 V at 30 °C which is three times less than Sample #2 with the leakage current value below 6.5 × 10−7 A/cm2. This demonstrates that the thickness ratio of Al2O3 and HfO2 films clearly impact the leakage current. We note that the electric field E of Al2O3 should be higher than that of HfO2, since the dielectric constant of HfO2 is higher than that of Al2O3. However, we simply formulate E by applying V/Tox (Tox is oxide thickness) in order to present an intuitive view of the leakage current changing trend. In addition, it is found that the leakage current density J increases as the temperature increases. This may be explained by the violent electron movements at high temperatures. To better understand the generation reason of the leakage current of the Au-Pt-Ti/HfO2-Al2O3/InAlAs MOS capacitor and the reason for the lower leakage current of the sample with the higher thickness ratio of Al2O3 and HfO2 films, we will study the leakage current mechanism of the devices at different bias condition ranges and different temperatures in detail.
Schottky emissions often happen in low electrical fields. The energy band diagram for Schottky emissions under the reversed bias condition is shown in Figure 2 [21,22,23,24]. Electrons surmount the metal–HfO2 surface barrier first, and then surmount the barrier at HfO2-Al2O3, and finally fall into the conduction band of InAlAs to form the leakage current. It can be verified by linear fitting the curve of ln J versus Ei1/2 with a straight line, where J is the leakage current density and Ei is the electric field intensity under reversed bias voltage [25,26]. Schottky emission is temperature dependent, and the slope of linear approximation on the curve of lnJ vs Ei1/2 needs to be consistent at different temperatures, which is the typical feature of Schottky emission [11,25,26]. Therefore, we make the line fit on the measurement curve under different temperatures of 30/50/70 °C in order to identify it correctly by the same scope of the fitting straight line, as shown in Figure 3. According to the analysis, the Schottky emission occurs in the bias range of −1.1–0 V and −1.7–0 V for Sample #1 and Sample #2, respectively. As we presented before, Sample #1, with a higher thickness ratio of Al2O3 and HfO2 films, shows a reduced leakage current in the Schottky region. This can be explained by its higher barrier height ϕB. The barrier height ϕB,n can be extracted from the equation ϕB,n = kTln(A*T2/J0)/q according to the Schottky emission mechanism, where k is the Boltzmann constant, T is the temperature, q is the electron charge, A* is the effective Richardson constant as the value of 105600A/K2m2, and J0 is the saturation current density [15]. The extracted ϕB,n values are listed in Table 2. The ϕB,n we extracted was illustrated as in Figure 2. It presents the barrier at HfO2/Al2O3 where is the top of the barrier. It is worth noting that the ϕB,n we obtained from the Schottky mechanism should be lower than the ideal barrier height by a value of △ϕB as shown in Figure 2. This gap can be explained by the Schottky barrier lowering effect [15,16]. It was found that Sample #1 presents a higher ϕB,n value than Sample #2, indicating that increasing the thickness of the Al2O3 film can suppress the accessibility of carriers to climb over the barrier to form a leakage current in the case of a fixed total thickness of laminated dielectric. In addition, it is noted that ϕB increases as the temperature is increased, while the leakage current is also increased as the temperature is increased (Shown in Figure 1). This is because electrons move more violently at high temperatures, making it easier for the electrons to cross through the even higher barrier between the oxide layer and the gate electrode, to form an increased gate leakage current. As a result, the samples show a clear, increased leakage current by one order of magnitude when the temperature was increased from 30 °C to 70 °C.
As Schottky emission is strongly related to dielectric-semiconductor interfacial conditions, a 60 s etching process was applied to the dielectric surface in order to make the interface suitable for X-ray photoelectron spectroscopy (XPS). An Al sputtering ion beam was applied in the XPS setup with a beam current density of 1.067 × 10−5 A/cm2 under 12,000 V. The XPS spectra were calibrated against the C–C peak at 284.8 eV. Advantage software was used to analyze the XPS data, the binding energy peak positions indicate the chemical environment of the elements and the peak areas show the elemental composition. The measurements of the O 1s peak are shown in Figure 4. Figure 4a presents the XPS measurement of the O 1s peak of the dielectric-semiconductor interface, and Figure 4b presents the comparison of the ratio of various oxide contents on the interface. It is found that a larger amount of Al2O3 with O 1s peak at 532.25 eV is presented in Sample #1, compared with Sample #2, which leads to enhanced matching between the dielectric and semiconductor and benefits the interfacial quality. Sample #2 presents Al–O and In–O on the interface, which forms interface states to degrade the interface quality. In addition, Sample #2 shows higher HfAlO components on the interface as well. The HfAl–O chemical bond is not as stable as the Al–O chemical bond because of its lower affinity with the oxide atom, make it easy to generate oxygen vacancies and dangling bonds in the presence of impurities from the epitaxial process to form interface states, i.e., As–O and In–O states, leading to a higher concentration of interfacial states. Thus, the leakage current that was contributed by interfacial traps is higher for Sample #2 with thinner Al3O2 at 4 nm. Therefore, increasing the ratio of Al2O3 to HfO2 is helpful to increase the interface quality, and to suppress the Schottky leakage current.
When Vg is continually biased to the negative direction, the Fowler–Nordheim (F–N) tunneling, which can be verified by fitting the curves of ln(J/Ei2) versus 1/Ei with a straight line [27,28,29,30,31], becomes the main leakage mechanism. According to the extraction in Figure 5, the F–N emission occurs in the range −3–−1.1 V and −3–−1.7 V, for Sample #1 and Sample #2, respectively. It indicates that when the electrical field intensity is large enough, the electrons obtain enough energy to tunnel the potential barrier to make F–N tunneling occur. It is noted that the slope of the F–N fitting straight line under different temperatures is not the same. This is because the F–N tunneling is not proportional to temperature [32], which is different from the Schottky emission mechanism. The effective barrier height can be extracted from the F–N fitting curve, and values are shown in Table 3. It is found that the barrier extracted for Sample #1 is higher than that of Sample #2 at 30 °C and 70 °C, resulting in Sample #1 showing a reduced leakage current in the F–N region at room temperature. In contrast, Sample #1 shows a lower barrier height, of 0.18 eV, than Sample #2, showing a barrier height of 0.26 eV with the temperature of 50 °C. This should make Sample #1 present a higher leakage current under the F–N region, which is consistent with the leakage current test result in Figure 1.

4. Discussion

The leakage current conduction mechanism of an Au-Pt-Ti/HfO2-Al2O3/InAlAs MOS-capacitor is dependent on the bias voltage. The Schottky emission occurs at a very low negative bias, and F–N tunneling becomes a dominant conduction mechanism when the electrical field intensity is increased continually. Due to the larger barrier height and lower interface states, the sample with HfO2 (4 m)/Al2O3 (8 nm) laminated dielectric shows a very low leakage current density of below 1.8 × 10−7 A/cm2 from −3 to 0 V at 30 °C. In conclusion, the HfO2 (4 m)/Al2O3 (8 nm) laminated dielectric structure is an optimized design to be the high-k dielectric used in Au-Pt-Ti/HfO2-Al2O3/InAlAs MOS capacitors to suppress the leakage current.

Author Contributions

Software, formal analysis, investigation, writing—original draft preparation, H.G.; writing—review and editing, supervision, project administration, S.W.

Funding

This project was supported by National science foundation of Shaanxi province, China (Grant No. 2018JQ6069), China Postdoctoral Science Foundation, (Grant No. 2018M643733), The key research and development program of shaanxi province (Grant No. 2018GY-006).

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Moschetti, G.; Wadefalk, N.; Nilsson, P.A.; Roelens, Y.; Noudeviwa, A.; Desplanque, L.; Wallart, X.; Danneville, F.; Dambrine, G.; Bollaert, S.; et al. InAs/AlSb HEMTs for cryogenic LNAs at ultra-low power dissipation. Solid-State Electron. 2011, 64, 47–53. [Google Scholar] [CrossRef]
  2. Moschetti, G.; Nilsson, P.; Wadefalk, N.; Malmkvist, M.; Lefebvre, E.; Grahn, J. DC characteristics of InAs/AlSb HEMTs at cryogenic temperatures. In Proceedings of the Indium Phosphide & Related Materials (IPRM) International Conference, Newport Beach, CA, USA, 10–14 May 2009; p. 323. [Google Scholar]
  3. Malmkvist, M.; Lefebvre, E.; Borg, M.; Desplanque, L.; Wallart, X.; Dambrine, G.; Bollaert, S.; Grahn, J. Electrical characterization and small-signal modeling of InAs/AlSb HEMTs for low-noise and high-frequency applications. IEEE Trans. Microw. Theory Tech. 2008, 56, 2685–2691. [Google Scholar] [CrossRef]
  4. Moschetti, G.; Wadefalk, N.; Nilsson, P.A.; Abbasi, M.; Desplanque, L.; Wallart, X.; Grahn, J. Cryogenic InAs/AlSb HEMT wideband low-noise IF amplifier for ultra-low-power applications. IEEE Microw. Wirel. Compon. Lett. 2012, 22, 144–146. [Google Scholar] [CrossRef]
  5. Malmkvist, M.; Lefebvre, E.; Borg, M. Characterization of insulated-gate versus schottky-gate InAs/AlSb HEMTs. In Proceedings of the European Microwave Integrated Circuit Conference, Munich, Germany, 8–10 October 2007. [Google Scholar]
  6. Hashizume, T.; Ootomo, S.; Inagaki, T.; Hasegawa, H. Surface passivation of GaN and GaN/AlGaN heterostructures by dielectric films and its application to insulated-gate heterostructure transistors. J. Vac. Sci. Technol. B 2003, 21, 1828. [Google Scholar] [CrossRef]
  7. Hashizume, T.; Anantathanasarn, S.; Negoro, N.; Sano, E.; Hasegawa, H.; Kumakura, K.; Makimoto, T. Al2O3 insulated-gate structure for AlGaN/GaN heterostructure field effect transistors having thin AlGaN barrier layers. Jpn. J. Appl. Phys. 2004, 43, 777. [Google Scholar] [CrossRef]
  8. Trinh, H.D.; Lin, Y.C.; Wang, H.C.; Chang, C.H.; Kakushima, K.; Iwai, H. Effect of Postdeposition Annealing Temperatures on Electrical Characteristics of Molecular-Beam-Deposited HfO2 on n-InAs/InGaAs Metal–Oxide–Semiconductor Capacitors. Appl. Phys. Express 2012, 5, 1104. [Google Scholar] [CrossRef]
  9. Brennan, B.; Galatage, R.V.; Thomas, K.; Pelucchi, E.; Hurley, P.K.; Kim, J.; Hinkle, C.L.; Vogel, E.M.; Wallace, R.M. Chemical and electrical characterization of the HfO2/InAlAs interface. J. Appl. Phys. 2013, 114, 104103. [Google Scholar] [CrossRef] [Green Version]
  10. Liu, C.; Zhang, Y.M.; Zhang, Y.M.; Lv, H.L. Interfacial characteristics of Al/Al2O3/ZnO/n-GaAs MOS capacitor. Chin. Phys. B. 2013, 22, 076701. [Google Scholar] [CrossRef]
  11. Jin, C.J.; Lv, H.L.; Zhang, Y.M.; Guan, H.; Li, Z.; Zhang, Y. Study on reverse-biased gate leakage current mechanisms in Al2O3/InAlAs metal-oxide-semiconductor structures. Thin Solid Films 2016, 619, 48–52. [Google Scholar] [CrossRef]
  12. Jin, C.J.; Lv, H.L.; Zhang, Y.M.; Guan, H.; Wu, L.; Lu, B.; Liu, C. Transport mechanisms of leakage current in Al2O3/InAlAs MOS capacitors. Solid-State Electron. 2016, 123, 106–110. [Google Scholar] [CrossRef]
  13. Wu, L.; Zhang, Y.; Lv, H.; Zhang, Y. Interfacial and electrical characterization of HfO2/Al2O3/InAlAs structures. Jpn. J. Appl. Phys. 2015, 54, 110303. [Google Scholar] [CrossRef]
  14. Guan, H.; Jing, C.Y. Study on the Physical and Leakage Current Characteristics of an Optimized High-k/InAlAs MOS Capacitor with a HfO2–Al2O3 Laminated Dielectric. Coatings 2018, 8, 417. [Google Scholar] [CrossRef]
  15. Guan, H.; Lv, H. Study on leakage current mechanism and band offset of high-k/n-InAlAs metal-oxide-semiconductor capacitors with HfO2 and HfAlO dielectric. Thin Solid Films 2018, 661, 137–142. [Google Scholar] [CrossRef]
  16. Lin, Y.C.; Hai, D.T.; Chuang, T.W.; Iwai, H.; Kakushima, K.; Ahmet, P.; Lin, C.H.; Diaz, C.H.; Chang, H.C.; Jiang, S.M.; et al. Electrical Characterization and Materials Stability Analysis ofLa2O3/HfO2 Composite Oxides on n-In0.53Ga0.47AsMOS Capacitors With Different Annealing Temperatures. IEEE Electron Device Lett. 2013, 34, 1229. [Google Scholar] [CrossRef]
  17. Galatage, R.V.; Dong, H.; Zhernokletov, D.M.; Brennan, B.; Hinkle, C.L.; Wallace, R.M.; Vogel, E.M. Effect of post deposition anneal on the characteristics of HfO2/InP metal-oxide-semiconductor capacitor. Appl. Phys. Lett. 2011, 99, 172901. [Google Scholar] [CrossRef]
  18. Park, J.; Cho, M.; Kim, S.K.; Park, T.J.; Lee, S.W.; Hong, S.H.; Hwang, C.S. Influence of the oxygen concentration of atomic-layer-deposited HfO2 films on the dielectric property and interface trap density. Appl. Phys. Lett. 2005, 86, 112907. [Google Scholar] [CrossRef]
  19. Galatage, R.V.; Dong, H.; Zhernokletov, D.M. Electrical and chemical characteristics of Al2O3/InP metal-oxide-semiconductor capacitors. Appl. Phys. Lett. 2013, 102, 122109. [Google Scholar] [CrossRef]
  20. Wheeler, D.C. High-k-InAs metal-oxide-semiconductor capacitors formed by atomic-layer deposition. Ph.D. Thesis, University of Notre Dame, Notre Dame, IN, USA, April 2009. [Google Scholar]
  21. Huang, M.L.; Chang, Y.C.; Chang, Y.H.; Lin, T.D.; Kwo, J.; Hong, M. Energy-band parameters of atomic layer deposited Al2O3 and HfO2 on InxGa1−xAs. Appl. Phys. Lett. 2009, 94, 052106. [Google Scholar] [CrossRef]
  22. Suri, R.; Kirkpatrick, C.J.; Lichtenwalner, D.J.; Misra, V. Energy-band alignment of Al2O3 and HfAlO gate dielectrics deposited by atomic layer deposition on 4H–SiC. Appl. Phys. Lett. 2010, 96, 042903. [Google Scholar] [CrossRef]
  23. Yu, H.Y.; Wu, N.; Li, M.F.; Zhu, C.; Cho, B.J. Thermal stability of (HfO2)x(Al2O3)1−x. Appl. Phys. Lett. 2002, 81, 3618–3620. [Google Scholar] [CrossRef]
  24. Suzuki, R.; Taoka, N.; Yokoyama, M.; Lee, S.; Kim, S.H.; HoshiIl, T.; Yasuda, T.; Jevasuwan, W.; Maeda, T.; Ichikawa, O.; et al. 1-nm-capacitance-equivalent-thickness HfO2/Al2O3/InGaAs metal-oxide-semiconductor structure with low interface trap density and low gate leakage current density. Appl. Phys. Lett. 2012, 100, 132906. [Google Scholar] [CrossRef]
  25. Quah, H.J.; Cheong, K.Y. Current conduction mechanisms of RF-magnetron sputtered Y2O3 gate oxide on gallium nitride. Curr. Appl. Phys. 2013, 13, 1433–1439. [Google Scholar] [CrossRef]
  26. Chiu, F.C. Electrical characterization and current transportation in metal∕ Dy2O3∕ Si structure. J. Appl. Phys. 2007, 102, 044116. [Google Scholar] [CrossRef]
  27. Cheong, K.Y.; Moon, J.H.; Kim, H.J.; Bahng, W.; Kim, N.K. Current conduction mechanisms in atomic-layer-deposited HfO2/nitride SiO2 stacked gate on 4H silicon carbide. J. Appl. Phys. 2008, 103, 084113. [Google Scholar] [CrossRef]
  28. Chanana, R.K.; McDonald, K.; Di Ventra, M.; Pantelides, S.T.; Feldman, L.C.; Chung, G.Y.; Tin, C.C.; Williams, J.R.; Weller, R.A. Fowler–Nordheim hole tunneling in p-SiC/SiO2 structures. Appl. Phys. Lett. 2000, 77, 2560–2562. [Google Scholar] [CrossRef]
  29. Zhang, H.; Miller, E.J.; Yu, E.T. Analysis of leakage current mechanisms in Schottky contacts to GaN and Al0.25Ga0.75N/GaN grown by molecular-beam epitaxy. J. Appl. Phys. 2006, 99, 023703. [Google Scholar] [CrossRef]
  30. Fiorenza, P.; Greco, G.; Giannazzo, F.; Lo Nigro, R.; Roccaforte, F. Poole-Frenkel emission in epitaxial nickel oxide on AlGaN/GaN heterostructures. Appl. Phys. Lett. 2012, 101, 172901. [Google Scholar] [CrossRef]
  31. Choi, Y.; Kang, S.; Cha, S.H.; Kim, H.S.; Song, K.; Lee, Y.J.; Kim, K.; Kim, Y.S.; Cho, S.; Park, Y. Platycodon saponins from Platycodi Radix (Platycodon grandiflorum) for the Green Synthesis of Gold and Silver Nanoparticles. Nanoscale Res. Lett. 2018, 13, 23. [Google Scholar] [CrossRef]
  32. Agarwal, A.K.; Seshadri, S.; Rowland, L.B. Temperature dependence of Fowler-Nordheim current in 6H-and 4H-SiC MOS capacitors. IEEE Electron Device Lett. 1997, 18, 592–594. [Google Scholar] [CrossRef]
Coatings 09 00720 g001 550
Figure 1. The leakage current measurement of the Au-Pt-Ti/HfO2-Al2O3/InAlAs MOS-capacitors under reversed bias condition at different temperatures. The solid symbol is for Sample #1 with HfO2 (4 nm)/Al2O3 (8 nm) laminated dielectrics, and the hollow symbol is for Sample #2 with HfO2 (8 nm)/Al2O3 (4 nm) laminated dielectrics.
Figure 1. The leakage current measurement of the Au-Pt-Ti/HfO2-Al2O3/InAlAs MOS-capacitors under reversed bias condition at different temperatures. The solid symbol is for Sample #1 with HfO2 (4 nm)/Al2O3 (8 nm) laminated dielectrics, and the hollow symbol is for Sample #2 with HfO2 (8 nm)/Al2O3 (4 nm) laminated dielectrics.
Coatings 09 00720 g001
Coatings 09 00720 g002 550
Figure 2. Schottky emission energy-band diagram for Vg < 0.
Figure 2. Schottky emission energy-band diagram for Vg < 0.
Coatings 09 00720 g002
Coatings 09 00720 g003 550
Figure 3. Schottky emission plots for MOS-capacitors at different temperatures. (a) Sample #1 with HfO2 (4 nm)/Al2O3 (8 nm) laminated dielectrics, (b) Sample #2 with HfO2 (8 nm)/Al2O3 (4 nm) laminated dielectrics.
Figure 3. Schottky emission plots for MOS-capacitors at different temperatures. (a) Sample #1 with HfO2 (4 nm)/Al2O3 (8 nm) laminated dielectrics, (b) Sample #2 with HfO2 (8 nm)/Al2O3 (4 nm) laminated dielectrics.
Coatings 09 00720 g003
Coatings 09 00720 g004 550
Figure 4. (a) X-ray photoelectron spectroscopy (XPS) measurement of the O1s peak of the dielectric-semiconductor interface, (b) comparison of the ratio of various oxide contents on the interface.
Figure 4. (a) X-ray photoelectron spectroscopy (XPS) measurement of the O1s peak of the dielectric-semiconductor interface, (b) comparison of the ratio of various oxide contents on the interface.
Coatings 09 00720 g004
Coatings 09 00720 g005 550
Figure 5. Fowler–Nordheim (F–N) tunneling plots for the MOS-capacitors. (a) Sample #1 with HfO2 (4 nm)/Al2O3 (8 nm) laminated dielectrics, (b) Sample #2 with HfO2 (8 nm)/Al2O3 (4 nm) laminated dielectrics.
Figure 5. Fowler–Nordheim (F–N) tunneling plots for the MOS-capacitors. (a) Sample #1 with HfO2 (4 nm)/Al2O3 (8 nm) laminated dielectrics, (b) Sample #2 with HfO2 (8 nm)/Al2O3 (4 nm) laminated dielectrics.
Coatings 09 00720 g005
Table
Table 1. Process description of Au-Pt-Ti/HfO2-Al2O3/n-InAlAs metal-oxide-semiconductor (MOS) capacitor.
Table 1. Process description of Au-Pt-Ti/HfO2-Al2O3/n-InAlAs metal-oxide-semiconductor (MOS) capacitor.
Process StepProcessDescription
1InP buffer layer depositionMBE (molecular beam epitaxy) at 470 °C
2InAlAs semiconductor layer depositionMBE at 350 °C
3Surface treatment of InAlAs36–38% HCl solution for 1 min and a 7% (NH4)S solution for 15 min, then dry in N2
4Al2O3 film depositionPass precursor of Al element as TMA (trimethylaluminium)
for 0.5 s, then pass N2 for 2 s in order to transfer the Al-base residue out, then pass precursor of O element as H2O for 0.5 s. Repeat the above process steps to obtain the required thickness
5HfO2 film depositionPass precursor of Hf element as TEMAH (tetrakis ethylmethylamino hafnium) for 1 s, then pass N2 for 2 s in order to drive off the Hf-base residue, then pass precursor of O element as H2O for 1 s. Repeat the above process steps to obtain the required thickness
6Post-deposition annealing (PDA)Heat the film from ambient temperature to 380 °C in N2 over 15 s, annealing for 60 s, and then cool to ambient temperature over 300 s
7Metal Magnetron sputtering. Size of 150 μm × 150 μm
Table
Table 2. Extracted barrier height ϕB,n from the Schottky emission leakage mechanism at different temperatures.
Table 2. Extracted barrier height ϕB,n from the Schottky emission leakage mechanism at different temperatures.
Sample #1
HfO2 (4 nm)/Al2O3 (8 nm)		Sample #2
HfO2 (8 nm)/Al2O3 (4 nm)
30 °C1.66 eV1.62 eV
50 °C1.73 eV1.70 eV
70 °C1.83 eV1.80 eV
Table
Table 3. Extracted barrier height from the F–N leakage mechanism.
Table 3. Extracted barrier height from the F–N leakage mechanism.
Sample #1
HfO2 (4 nm)/Al2O3 (8 nm)		Sample #2
HfO2 (8 nm)/Al2O3 (4 nm)
30 °C0.24 eV0.21 eV
50 °C0.18 eV0.26 eV
70 °C0.09 eV0.03 eV

Share and Cite

MDPI and ACS Style

Guan, H.; Wang, S. Leakage Current Conduction Mechanism of Au-Pt-Ti/ HfO2-Al2O3/n-InAlAs Metal-Oxide-Semiconductor Capacitor under Reverse-Biased Condition. Coatings 2019, 9, 720. https://doi.org/10.3390/coatings9110720

AMA Style

Guan H, Wang S. Leakage Current Conduction Mechanism of Au-Pt-Ti/ HfO2-Al2O3/n-InAlAs Metal-Oxide-Semiconductor Capacitor under Reverse-Biased Condition. Coatings. 2019; 9(11):720. https://doi.org/10.3390/coatings9110720

Chicago/Turabian Style

Guan, He, and Shaoxi Wang. 2019. "Leakage Current Conduction Mechanism of Au-Pt-Ti/ HfO2-Al2O3/n-InAlAs Metal-Oxide-Semiconductor Capacitor under Reverse-Biased Condition" Coatings 9, no. 11: 720. https://doi.org/10.3390/coatings9110720

APA Style

Guan, H., & Wang, S. (2019). Leakage Current Conduction Mechanism of Au-Pt-Ti/ HfO2-Al2O3/n-InAlAs Metal-Oxide-Semiconductor Capacitor under Reverse-Biased Condition. Coatings, 9(11), 720. https://doi.org/10.3390/coatings9110720

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop