Next Article in Journal / Special Issue
Optimization of Microstructure and Mechanical Properties in Al-Zn-Mg-Cu Alloys Through Multiple Remelting and Heat Treatment Cycles
Previous Article in Journal
Influence of Selective Laser Melting Process and Heat Treatment Parameters on the Corrosion Resistance of 17-4 Precipitation Hardening Stainless Steel
Previous Article in Special Issue
Modeling and Monitoring of the Tool Temperature During Continuous and Interrupted Turning with Cutting Fluid
 
 

Order Article Reprints

Journal: Metals, 2025
Volume: 15
Number: 233

Article: The Influence of Process Parameters on the Density, Microstructure, and Mechanical Properties of TA15 Titanium Alloy Fabricated by Selective Laser Melting
Authors: by Junjie Jiang, Chuang Liang, Yuanchao Chen, Yongbiao Wang, Hongyang Cui, Jianlin Xu, Fang Zhou, Pengpeng Wang and David Z. Zhang
Link: https://www.mdpi.com/2075-4701/15/3/233

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop