Article Versions Notes

Tanrikulu AA, Ganesh-Ram A, Hekmatjou H, Durlov SH, Salehin MN, Amerinatanzi A. Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion. Metals. 2024; 14(6):629. https://doi.org/10.3390/met14060629

Tanrikulu, Ahmet Alptug, Aditya Ganesh-Ram, Hamidreza Hekmatjou, Sadman Hafiz Durlov, Md Najmus Salehin, and Amirhesam Amerinatanzi. 2024. "Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion" Metals 14, no. 6: 629. https://doi.org/10.3390/met14060629

Tanrikulu, A. A., Ganesh-Ram, A., Hekmatjou, H., Durlov, S. H., Salehin, M. N., & Amerinatanzi, A. (2024). Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion. Metals, 14(6), 629. https://doi.org/10.3390/met14060629