Next Article in Journal
Graphene Nanoplatelets-Based Textured Polymeric Fibrous Fabrics for the Next-Generation Devices
Next Article in Special Issue
Response-Surface-Methodology-Based Increasing of the Isotropic Thermal Conductivity of Polyethylene Composites Containing Multiple Fillers
Previous Article in Journal
Evaluation of the Strength of the Interface for Abaca Fiber Reinforced Hdpe and Biope Composite Materials, and Its Influence over Tensile Properties
Previous Article in Special Issue
Mechanical Properties of 3D-Printed PEEK/HA Composite Filaments
 
 

Order Article Reprints

Journal: Polymers, 2022
Volume: 14
Number: 5414

Article: The Mechanical, Thermal, and Chemical Properties of PLA-Mg Filaments Produced via a Colloidal Route for Fused-Filament Fabrication
Authors: by Jaime Orellana-Barrasa, Ana Ferrández-Montero, Aldo. R. Boccaccini, Begoña Ferrari and José Ygnacio Pastor
Link: https://www.mdpi.com/2073-4360/14/24/5414

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop