Next Article in Journal
Layer-by-Layer Surface Modification of Alendronate-Loaded Polyester Microparticles—Enabling Protein Immobilization
Next Article in Special Issue
Height-to-Diameter Ratio and Porosity Strongly Influence Bulk Compressive Mechanical Properties of 3D-Printed Polymer Scaffolds
Previous Article in Journal
Mechanical Performance of Recycled Reinforced Polyamide from Rejected Railway Fastenings Flanged Plates
Previous Article in Special Issue
Structural Analysis of Carbon Fiber 3D-Printed Ribs for Small Wind Turbine Blades
 
 

Order Article Reprints

Journal: Polymers, 2022
Volume: 14
Number: 4941

Article: A Review on Microstructural Formations of Discontinuous Fiber-Reinforced Polymer Composites Prepared via Material Extrusion Additive Manufacturing: Fiber Orientation, Fiber Attrition, and Micro-Voids Distribution
Authors: by Zhaogui Wang, Zhenyu Fang, Zhongqi Xie and Douglas E. Smith
Link: https://www.mdpi.com/2073-4360/14/22/4941

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop