Next Article in Journal
Effect of Printing Parameters on the Tensile Properties of 3D-Printed Polylactic Acid (PLA) Based on Fused Deposition Modeling
Next Article in Special Issue
Effect of Graphene Addition on Polycaprolactone Scaffolds Fabricated Using Melt-Electrowriting
Previous Article in Journal
Polyethylene/Polyamide Blends Made of Waste with Compatibilizer: Processing, Morphology, Rheological and Thermo-Mechanical Behavior
Previous Article in Special Issue
Feasibility Assessment of Parathyroid Hormone Adsorption by Using Polysaccharide-Based Multilayer Film Systems
 
 
Article

Article Versions Notes

Polymers 2021, 13(14), 2386; https://doi.org/10.3390/polym13142386
Action Date Notes Link
article pdf uploaded. 20 July 2021 15:52 CEST Version of Record https://www.mdpi.com/2073-4360/13/14/2386/pdf-vor
article supplementary file uploaded. 20 July 2021 15:52 CEST - https://www.mdpi.com/2073-4360/13/14/2386#supplementary
article xml file uploaded 21 July 2021 03:59 CEST Original file -
article xml uploaded. 21 July 2021 03:59 CEST Update https://www.mdpi.com/2073-4360/13/14/2386/xml
article pdf uploaded. 21 July 2021 04:00 CEST Updated version of record https://www.mdpi.com/2073-4360/13/14/2386/pdf
article html file updated 21 July 2021 04:01 CEST Original file -
article html file updated 22 July 2021 07:55 CEST Update -
article html file updated 26 July 2021 10:08 CEST Update -
article html file updated 27 July 2022 05:43 CEST Update https://www.mdpi.com/2073-4360/13/14/2386/html
Back to TopTop