Next Article in Journal
An RDL Modeling and Thermo-Mechanical Simulation Method of 2.5D/3D Advanced Package Considering the Layout Impact Based on Machine Learning
Next Article in Special Issue
High Gain Slot Array Antenna at 110 GHz Based on Computer Numerical Control
Previous Article in Journal
Biopolymers Used for Receptor Immobilization for Nickel-Detection Biosensors in Food
 
 
Article
Peer-Review Record

A High-Power 170 GHz in-Phase Power-Combing Frequency Doubler Based on Schottky Diodes

Micromachines 2023, 14(8), 1530; https://doi.org/10.3390/mi14081530
by Li Wang 1,2, Dehai Zhang 1,*, Jin Meng 1 and Haotian Zhu 1
Reviewer 1: Anonymous
Reviewer 2:
Micromachines 2023, 14(8), 1530; https://doi.org/10.3390/mi14081530
Submission received: 12 July 2023 / Revised: 26 July 2023 / Accepted: 27 July 2023 / Published: 30 July 2023
(This article belongs to the Special Issue Cutting-Edge Terahertz Technology)

Round 1

Reviewer 1 Report

1. What is the maximum input power for the present multiplier on AIN substrate leading to the degradation of multiplier performance?

2. There is a typo in Figure 6 and Figure 8 as well ‘Mental Block’.

Author Response

Please see the attachment

Author Response File: Author Response.docx

Reviewer 2 Report

The authors have reported on a a high power 170 GHz frequency doubler based on Schottky diode. The manuscript is interesting, consistent and well written.

Furthermore, the following statements should be reexamined:

1) The power divider is a critical circuit in the design and should be included in the tolerance analysis

2) Figure 13 Maybe it would be better to switch to a tabular form, this is just a suggestion and not a necessity

Minor editing of English language required, please check the expression carefully.

  •  

Author Response

Please see the attachment

Author Response File: Author Response.docx

Back to TopTop