Next Article in Journal
FSW Optimization: Prediction Using Polynomial Regression and Optimization with Hill-Climbing Method
Next Article in Special Issue
Liquid Phase Sintering of Al Powder Using Al-X (X=Cu, Ca, Mg) Eutectic Alloy Powders: Effect of Alloy Elements and Oxide Film Thickness
Previous Article in Journal
Study of the Influence of Desert Sand-Mineral Admixture on the Abrasion Resistance of Concrete
Previous Article in Special Issue
Innovative Powder Pre-Treatment Strategies for Enhancing Maraging Steel Performance
 
 

Order Article Reprints

Journal: Materials, 2025
Volume: 18
Number: 447

Article: Development of 17-4 PH Stainless Steel for Low-Power Selective Laser Sintering
Authors: by Yu-Deh Chao, Shu-Cheng Liu, Fu-Lin Chen, Mayur Jiyalal Prajapati, Ajeet Kumar, Jung-Ting Tsai and Jeng-Ywan Jeng
Link: https://www.mdpi.com/1996-1944/18/2/447

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop