Next Article in Journal
Single Tracks as a Key Factor in Additive Manufacturing Technology—Analysis of Research Trends and Metal Deposition Behavior
Previous Article in Journal
High-Power Fiber Laser Cutting for 50-mm-Thick Cement-Based Materials
Previous Article in Special Issue
Physical Modeling of Cross Wedge Rolling Limitations
 
 
Article

Article Versions Notes

Materials 2020, 13(5), 1114; https://doi.org/10.3390/ma13051114
Action Date Notes Link
article xml file uploaded 3 March 2020 10:26 CET Original file -
article xml uploaded. 3 March 2020 10:26 CET Update https://www.mdpi.com/1996-1944/13/5/1114/xml
article pdf uploaded. 3 March 2020 10:26 CET Version of Record https://www.mdpi.com/1996-1944/13/5/1114/pdf
article html file updated 3 March 2020 10:28 CET Original file -
article html file updated 18 March 2020 15:34 CET Update -
article html file updated 20 July 2022 21:48 CEST Update https://www.mdpi.com/1996-1944/13/5/1114/html
Back to TopTop