Erratum: Han, D.-H.; Kang, L.-H. Terahertz Displacement and Thickness Sensor with Micrometer Resolution and Centimeter Dynamic Range

Dae-Hyun Han; Lae-Hyong Kang

doi:10.3390/s20061605

and

¹

Department of Mechatronics Engineering, and LANL-JBNU Engineering Institute-Korea, Jeonbuk National University, 567 Baekje-daero, Duckjin-gu, Jeonju-si, Jeonbuk 54896, Korea

²

Department of Mechatronics Engineering, Department of Flexible and Printable Electronics, and LANL-JBNU Engineering Institute-Korea, Jeonbuk National University, 567 Baekje-daero, Duckjin-gu, Jeonju-si, Jeonbuk 54896, Korea

^*

Author to whom correspondence should be addressed.

Sensors2020, 20(6), 1605;https://doi.org/10.3390/s20061605

Version Notes

Order Reprints

The authors wish to make the following erratum to this paper [1].

Funding is incorrect and must be replaced by the following Funding:

Funding: This material is based upon work supported by the Ministry of Trade, Industry & Energy (MOTIE, Korea) under the Sensor Industry Enhancement Program (20003125, Development of an ultraprecision measurement sensor based on the fiber composite for flaw detection of the composite structure), and the Korea Institute for Advancement of Technology (P0007067).

The authors would like to apologize for any inconvenience caused to the readers by these changes.

Reference

Han, D.-H.; Kang, L.-H. Terahertz Displacement and Thickness Sensor with Micrometer Resolution and Centimeter Dynamic Range. Sensors 2019, 19, 5249. [Google Scholar] [CrossRef] [PubMed]

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Erratum: Han, D.-H.; Kang, L.-H. Terahertz Displacement and Thickness Sensor with Micrometer Resolution and Centimeter Dynamic Range

Reference

Article Metrics

Citations

Article Access Statistics