The authors wish to make the following corrections to this paper [1]: we have found a typing error in the caption of Figure 9 (page 12)—Ts should have a value of 2220.3 K, not 220.3 K.
The correct caption of Figure 9 is
Figure 9. Non-linear curve fitting results for a spectrum from combustion of PyE sample, RMSE (root mean square error) = 0.4393, θ0 = 0.0249, Ts = 2220.3 K, θ1 (related to I1 or Na) = 3.4583, θ2 (related to I2 or Na) = 15.7373, θ3 (related to I3 or FeO) = 6.2484, θ4 (related to I4 or Fe3O4) = 7.3093 and θ5 (related to an offset) = 9.6 × 10-8.
This change has no material impact on the conclusions of our paper. The authors would like to apologize for any inconvenience caused to the readers by this change.
Reference
- Toro, C.; Torres, S.; Parra, V.; Fuentes, R.; Castillo, R.; Diaz, W.; Reyes, G.; Balladares, E.; Parra, R. On the Detection of Spectral Emissions of Iron Oxides in Combustion Experiments of Pyrite Concentrates. Sensors 2020, 20, 1284. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).