Search Results (12)

The objective of the present work was to determine the physico-mechanical and energy properties of pine (Pinus sylvestris) and beech (Fagus sylvatica) wood from railroad ties. The ties were divided into internal and external parts as well as into parts impregnated and unimpregnated with creosote oil. The effects of creosote impregnation on wood hardness, compressive strength parallel to the grain, static bending strength, and calorific value were studied. The obtained results show that the parameters of the analyzed samples meet the standard requirements (EN 338) for construction wood (compressive and bending strength class: C50—pine; D70—beech). Depending on the particular property being studied, both pine and beech samples belong to the highest or one of the highest wood quality classes. Creosote oil considerably increased wood density (by 9% for beech and 19% for pine) but did not affect its hardness. Creosote impregnation significantly improved the compressive strength parallel to the grain of both wood species (beech: ${\sigma }_c=51.99 \mathrm{M}\mathrm{P}\mathrm{a}$(IN); ${\sigma }_c=57.78 \mathrm{M}\mathrm{P}\mathrm{a}$(OUT); pine: ${\sigma }_c=36.56 \mathrm{M}\mathrm{P}\mathrm{a}$(IN); ${\sigma }_c=42.45 \mathrm{M}\mathrm{P}\mathrm{a}$(OUT)); in the case of static bending strength, its value was increased for beech wood (${\sigma }_g=106.13 \mathrm{M}\mathrm{P}\mathrm{a}$ (IN); ${\sigma }_g=113.18 \mathrm{M}\mathrm{P}\mathrm{a}$ (OUT)) and reduced for pine wood (${\sigma }_g=66.34 \mathrm{M}\mathrm{P}\mathrm{a}$ (IN); ${\sigma }_g=82.62 \mathrm{M}\mathrm{P}\mathrm{a}$ (OUT)). The oil contained in wood from ties significantly elevated its calorific value (by 25% for beech and 10% for pine). Unfortunately, the presence of creosote oil currently prevents wood from railroad ties from being reused as the oil is deemed hazardous and carcinogenic. However, if it were possible to isolate the unimpregnated parts of railroad ties, they could be reapplied for construction or other uses. Full article

Creosote, a mixture of polycyclic aromatic hydrocarbons (PAHs), was and is a wood impregnate of widespread use. Over the years the accumulation of creosote PAHs in soils and freshwaters has increased, causing a threat to ecosystems. The combined ozonation-biodegradation process is proposed to improve the slow and inefficient biodegradation of creosote hydrocarbons. The impact of different ozonation methods on the biodegradation of model wastewater was evaluated. The biodegradation rate, the changes in chemical oxygen demand, and the total organic carbon concentration were measured in order to provide insight into the process. Moreover, the bacteria consortium activity was monitored during the biodegradation step of the process. The collected data confirmed the research hypothesis, which was that the hybrid method can improve biodegradation. The pre-ozonation followed by inoculation with a bacteria consortium resulted in a significant increase in the biodegradation rate. It allows for the shortening of the time required for the consortium to reach maximum degradation effectiveness and cell activity. Hence, the study gives an important and useful perspective for the decontamination of creosote-polluted ecosystems. Full article

A fundamental issue of waste management and the rail transport industry is the problem of utilizing used railroad ties. Wooden railroad ties are treated with a preservative, usually creosote. Due to their high toxicity, railroad ties are considered hazardous waste and must be utilized under various directives. It is proposed to utilize the troublesome waste by using the pyrolysis and torrefaction process. The research proves that the thermal method is effective for disposing of this type of waste. Torrefaction up to 250 °C gives high efficiency of impregnation removal, while pyrolysis up to 400 °C completely neutralizes waste. A series of experiments were conducted for various final pyrolysis temperatures to determine a minimum temperature for which the obtained solid products are free from creosote. Extraction with the use of the Soxhlet technique was performed for the raw materials and the obtained solid products—chars. The oil content for liquid fraction was also examined for each sample. As a result of the thermal treatment of the waste, fuel with combustion parameters better than wood was obtained. For a high final temperature of the process, the calorific value of char is close to that of hard coal. Full article

This study evaluated the effect of biodiesel as a co-solvent with the wood preservative creosote to reduce the amount of hydrocarbon-based carrier utilized. Small blocks of wood were treated at a pilot scale using three different creosote concentrations. The diluent used was a blend of 80% soybean biodiesel and 20% petroleum diesel. The efficacy of creosote was tested against brown rot and white rot fungi. The results of the wood-block test and agar test suggested that there was no significant effect of biodiesel on the efficacy of creosote as a wood preservative. As creosote-treated wood is commonly used for railway ties, its potential impact on the surrounding environment was also assessed by studying the leaching behavior of creosote–biodiesel–diesel blend treated railway ties. Rainfall simulators were used to imitate an exposure of treated wood to a significant amount of rainfall. Wood core drilled from the exposed railway ties and leaching water samples were analyzed for the levels of polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs). Overall, this study demonstrated that the diluent containing biodiesel had no negative effect on the performance of creosote as a wood preservative and towards the natural environment. Full article

Creosote oil, a byproduct of coal distillation, is primarily composed of aromatic compounds that are difficult to degrade, such as polycyclic aromatic hydrocarbons, phenolic compounds, and N-, S-, and O-heterocyclic compounds. Despite its toxicity and carcinogenicity, it is still often used to impregnate wood, which has a particularly negative impact on the condition of the soil in plants that impregnate wooden materials. Therefore, a rapid, effective, and eco-friendly technique for eliminating the creosote in this soil must be developed. The research focused on obtaining a preparation of Bjerkandera adusta DSM 3375 mycelium immobilized in polyurethane foam (PUF). It contained mold cells in the amount of 1.10 ± 0.09 g (DW)/g of the carrier. The obtained enzyme preparation was used in the bioremediation of soil contaminated with creosote (2% w/w). The results showed that applying the PUF-immobilized mycelium of B. adusta DSM 3375 over 5, 10, and 15 weeks of bioremediation, respectively, removed 19, 30, and 35% of creosote from the soil. After 15 weeks, a 73, 79, and 72% level of degradation of fluoranthene, pyrene, and fluorene, respectively, had occurred. The immobilized cells have the potential for large-scale study, since they can degrade creosote oil in soil. Full article

The management of municipal and industrial organic solid wastes has become one of the most critical environmental problems in modern societies. Nowadays, commonly used management techniques are incineration, composting, and landfilling, with the former one being the most common for hazardous organic wastes. An alternative eco-friendly method that offers a sustainable and economically viable solution for hazardous wastes management is fast pyrolysis, being one of the most important thermochemical processes in the petrochemical and biomass valorization industry. The objective of this work was to study the application of fast pyrolysis for the valorization of three types of wastes, i.e., petroleum-based sludges and sediments, residual paints left on used/scrap metal packaging, and creosote-treated wood waste, towards high-added-value fuels, chemicals, and (bio)char. Fast pyrolysis experiments were performed on a lab-scale fixed-bed reactor for the determination of product yields, i.e., pyrolysis (bio)oil, gases, and solids (char). In addition, the composition of (bio)oil was also determined by Py/GC-MS tests. The thermal pyrolysis oil from the petroleum sludge was only 15.8 wt.% due to the remarkably high content of ash (74 wt.%) of this type of waste, in contrast to the treated wood and the residual paints (also containing 30 wt.% inorganics), which provided 46.9 wt.% and 35 wt.% pyrolysis oil, respectively. The gaseous products ranged from ~7.9 wt.% (sludge) to 14.7 (wood) and 19.2 wt.% (paints), while the respective solids (ash, char, reaction coke) values were 75.1, 35, and 36.9 wt.%. The thermal (non-catalytic) pyrolysis of residual paint contained relatively high concentrations of short acrylic aliphatic ester (i.e., n-butyl methacrylate), being valuable monomers in the polymer industry. The use of an acidic zeolitic catalyst (ZSM-5) for the in situ upgrading of the pyrolysis vapors induced changes on the product yields (decreased oil due to cracking reactions and increased gases and char/coke), but mostly on the pyrolysis oil composition. The main effect of the ZSM-5 zeolite catalyst was that, for all three organic wastes, the catalytic pyrolysis oils were enriched in the value-added mono-aromatics (BTX), especially in the case of the treated wood waste and residual paints. The non-condensable gases were mostly consisting of CO, CO₂, and different amounts of C₁–C₄ hydrocarbons, depending on initial feed and use or not of the catalyst that increased the production of ethylene and propylene. Full article

Wood is an increasingly demanded renewable resource and an important raw material for construction and materials. In addition, new consumption habits are leading to the production of ever greater volumes of waste wood, which constitutes a feedstock that can be mobilized for the cascade production of new materials such as particleboard. However, current legislation and wood waste recycling processes need to be improved in order to maximize the volumes that can be reused and to upgrade the properties of the recycled wood. This review describes wood waste flows and volumes available in Europe, the current French and European legislation, and the innovations under development in this field: innovative automated sorting techniques, physical-chemical processes for cleaning residual glue from the surface of wood particles, cleaning of MDF, and bioremediation processes for cleaning hazardous wood contaminated by heavy metals or creosote. Full article

The most commonly applied wood preservatives are based on creosote, pentachlorophenol, and waterborne chromate copper arsenate, which negatively affect the environment. Thus, environmentally friendly wood preservatives are required. This study investigated the antifungal activity and mechanism of several long-chain alkyl gallates (3,4,5-trihydroxybenzoates) against white-rot fungi, Lenzites betulina and Trametes versicolor. The results revealed that octyl gallate (OG) had the best antifungal activity. Additionally, OG may have a mechanism of action similar to surfactants and inhibit ATPase activity, causing mitochondrial dysfunction and endogenous reactive oxygen species (ROS) production. Upon exposure to endogenous ROS, cells rapidly inhibit the synthesis of 60S ribosomal subunits, thus reducing the mycelial growth rate. L. betulina and T. versicolor also remodeled their energy metabolism in response to low ATP levels and endogenous ROS. After OG treatment, ATP citrate synthase activity was downregulated and glycolytic activity was upregulated in L. betulina. However, the activity of aerobic pathways was decreased and the oxidative branch of the pentose phosphate pathway was redirected form nicotinamide adenine dinucleotide phosphate (NADPH) to minimize endogenous ROS-mediated damage in T. versicolor. Taken together, these observations reveal that OG is a potent inhibitor of white-rot fungus. Further structural optimization research and pharmacological investigations are warranted. Full article

Direct lightning strikes on overhead phase conductors result in high overvoltage stress on the medium voltage (MV) terminals of pole-mounted transformers, which may cause considerable damage. Therefore, introducing an efficient protection strategy would be a remedy for alleviating such undesirable damages. This paper investigates the optimized protection of MV transformers against direct lightning strikes on the phase conductors. To this end, first, the impacts of grounding densities (number of grounded intermediate poles between every two successive transformer poles) on the probability of overvoltage stress on transformer terminals are investigated. Then, the implications of guy wire, as a supporting device for ungrounded intermediate poles, on reducing the overvoltage stress on transformers, are studied. Finally, the role of a surge arrester in mitigating the overvoltage stress of non-surge-arrester-protected transformer poles is scrutinized. The investigations are conducted on a sample MV network with 82 wood poles comprising 17 pole-mounted transformers protected by spark gaps. To provide in-depth analysis, two different poles, namely creosote- and arsenic-impregnated poles, are considered under wet and dry weather conditions. A sensitivity analysis is performed on grounding distances and on a combination of guy wire and grounded intermediate poles while taking into account soil ionization. The results provide a clear picture for the system operator in deciding how many grounded intermediate poles might be required for a system to reach the desired probabilities of transformers experiencing overvoltage stress and how the surge arrester and guy wires contribute to mitigating undesirable overvoltage stress. Full article

Creosote oil, widely used as a wood preservative, is a complex mixture of different polycyclic aromatic compounds. The soil contamination result in the presence of a specific microcosm. The presented study focuses on the most active strains involved in bioremediation of long-term creosote-contaminated soil. In three soil samples from different boreholes, two Sphingomonas maltophilia (S. maltophilia) and one Paenibacillus ulginis (P. ulginis) strain were isolated. The conducted experiments showed the differences and similarities between the bacteria strains capable of degrading creosote from the same contaminated area. Both S. maltophilia strains exhibit higher biodegradation efficiency (over 50% after 28 days) and greater increase in glutathione S-transferase activity than P. ulginis ODW 5.9. However, S. maltophilia ODW 3.7 and P. ulginis ODW 5.9 were different from the third of the tested strains. The growth of the former two on creosote resulted in an increase in cell adhesion to Congo red and in the total membrane permeability. Nevertheless, all three strains have shown a decrease in the permeability of the inner cell membrane. That suggests the complex relationship between the cell surface modifications and bioavailability of the creosote to microorganisms. The conducted research allowed us to broaden the current knowledge about the creosote bioremediation and the properties of microorganisms involved in the process. Full article

Wood creosote, Seirogan, is a non-prescription drug used to treat diarrhea. However, reports of its clinical use are rare. Here, we report the efficacy of wood creosote (3 capsules daily) in alleviating diarrheal symptoms in 148 patients from 10 clinics in Osaka, Japan. Wood creosote was classified to be remarkably effective, effective, partially effective, or not effective on the basis of the degree of alleviation of diarrheal symptoms. The anti-diarrheal efficacy of wood creosote soft capsules did not differ between males and females. Younger patients (21–30 years) showed greater improvement in diarrhea symptoms than elderly patients (>61 years) did. Wood creosote soft capsules were remarkably effective (44 patients), effective (71 patients), and partially effective (13 patients) in alleviating diarrhea symptoms due to a variety of causes. To the best of our knowledge, this is the first report on the clinical effectiveness of wood creosote soft capsules in treating diarrhea. Full article

The use of pyrolysis-based wood conservation is a good alternative for the use of fossil-based creosotes. In this life cycle assessment (LCA) the environmental impact of a biorefinery approach of pyrolysis oil from forestry residues or maize digestate and its application as wood modification treatment is determined. The damage to ecosystems, damage to human health and the increased resource scarcity is studied using an attributional LCA and a sensitivity and uncertainty analysis. Based on data from an existing pyrolysis plant, it is shown that pyrolysis oil from maize digestate has a significantly higher environmental impact than pyrolysis oil from forestry residues. This is due to a lower energetic yield and a higher ash content in the feedstock. The biorefinery approach of using pyrolytic sugars as wood modification treatment shows significantly lower environmental impacts than the fossil-based creosotes, regardless of the selected end of life scenario, due to a lower toxicity and by a reduction of 82% of greenhouse gases. This shows that in addition to energy production, pyrolysis oil can be applied as biobased chemicals and materials, developing a sustainable platform based on pyrolysis oil. Full article