Search Results (44)

This paper presents a study of the tonality of sound emitted by a wind farm into the surrounding environment. The wind turbines installed at the site have a rated power of 3.0 MW. The aim of the study was to analyse the tonality of sounds in the environment at the nearest residential area. The issue of tonal noise near the wind farm was identified during routine periodic noise monitoring. An experienced survey team identified the phenomenon and carried out preliminary field analyses. Detailed studies were then carried out to identify the environmental hazard and failure-free operation of the turbines. The recorded acoustic events are described in detail and an in-depth analysis is carried out. An action plan has been implemented in consultation with the wind farm operator to reduce tonal sound emissions to the surrounding environment. As a result of these interventions, tonal noise from the wind turbines was successfully reduced. It was determined that the detection of the potential tonality of the sounds emitted by wind turbines should take place during the analysis (active listening) of the .wav file, synchronised with Fast Fourier Transform (FFT) analysis. Conducting tonality assessments solely during field measurements may lead to incorrect identification of tonal sources. Full article

Six years after its deployment, SatShipAI, an operational platform combining AI models with Sentinel-1 SAR imagery and AIS data, has provided robust maritime surveillance around Denmark. A meta-analysis of archived outputs, logs, and manual reviews shows stable vessel detection and classification performance over time, including successful cross-sensor application to X-band SAR data without retraining. Key operational challenges included orbit file delays, nearshore detection limits, and emerging infrastructure such as wind farms. The platform proved particularly valuable for detecting offshore “dark” vessels beyond AIS coverage, informing maritime security, traffic management, and emergency response. These findings demonstrate the feasibility, resilience, and adaptability of long-term AI–geospatial systems, offering practical guidance for future autonomous monitoring infrastructure. Full article

This study presents an innovative pipeline for processing, compressing, and remotely visualizing large-scale numerical simulations of fluid dynamics in a virtual wind tunnel (VWT), leveraging virtual and augmented reality (VR/AR) for enhanced analysis and high-end visualization. The workflow addresses the challenges of handling massive databases generated using Direct Numerical Simulation (DNS) while maintaining visual fidelity and ensuring efficient rendering for user interaction. Fully immersive visualization of supersonic (Mach number 2.86) spatially developing turbulent boundary layers (SDTBLs) over strong concave and convex curvatures was achieved. The comprehensive DNS data provides insights on the transport phenomena inside turbulent boundary layers under strong deceleration or an Adverse Pressure Gradient (APG) caused by concave walls as well as strong acceleration or a Favorable Pressure Gradient (FPG) caused by convex walls under different wall thermal conditions (i.e., Cold, Adiabatic, and Hot walls). The process begins with a .vts file input from a DNS, which is visualized using ParaView software. These visualizations, representing different fluid behaviors based on a DNS with a high spatial/temporal resolution and employing millions of “numerical sensors”, are treated as individual time frames and exported in GL Transmission Format (GLTF), which is a widely used open-source file format designed for efficient transmission and loading of 3D scenes. To support the workflow, optimized Extract–Transform–Load (ETL) techniques were implemented for high-throughput data handling. Conversion of exported Graphics Library Transmission Format (GLTF) files into Graphics Library Transmission Format Binary files (typically referred to as GLB) reduced the storage by 25% and improved the load latency by 60%. This research uses Unity’s Profile Analyzer and Memory Profiler to identify performance limitations during contour rendering, focusing on the GPU and CPU efficiency. Further, immersive VR/AR analytics are achieved by connecting the processed outputs to Unity engine software and Microsoft HoloLens Gen 2 via Azure Remote Rendering cloud services, enabling real-time exploration of fluid behavior in mixed-reality environments. This pipeline constitutes a significant advancement in the scientific visualization of fluid dynamics, particularly when applied to datasets comprising hundreds of high-resolution frames. Moreover, the methodologies and insights gleaned from this approach are highly transferable, offering potential applications across various other scientific and engineering disciplines. Full article

The aim of this study was to observe soil erosion by wind, depending on the soil physical properties, climatic conditions, and plant canopy, for three representative soil series in the reclaimed tidal flats. Soil samples were collected from the Ap horizon of three soil series to analyze soil physical properties and particle distribution. Precipitation and wind velocities were measured by the weather station installed at the filed. The particle distribution curves showed that the actual proportions of erodible soil particle were in the order of 74.7%(TH), 66.1%(PS), and 62%(JB). The instantaneous and daily maximum wind speeds exceeded the threshold friction velocity (5.78 m s⁻¹) suggested by Chepil. However, the dynamic velocities, depending on the radius of 0.125 mm and 0.42 mm belonging to erodible particle size, were much lower than the threshold friction velocity suggested by Chepil. The wind profile increases logarithmically with height, just above the plant canopy. The vertical gradients of wind velocity for the winter wheat plot were smaller than that of the bare plot due to the relatively rough canopy, and U(Z)c of the bare plot was slightly higher than that of the winter wheat plot with a plant canopy for the given U(Z)m. Conclusively, the actual proportion of erodible particles was much less than that of the particle size limit. Full article

The Soil Moisture Active Passive (SMAP) satellite can measure sea surface winds under tropical cyclone (TC) conditions with its L-band microwave radiometer, without being affected by rainfall or signal saturation. Through the statistical analysis of SMAP data, this study aims to develop radial wind profile models for the TC outer area whose distance from TC center is larger than the radius of maximum wind ($R_{\mathrm{m}}$). A total of 196 TC cases observed by SMAP were collected between 2015 and 2020, and their intensities range from tropical storm to category 5. Based on the wind and radius data, the key model parameters $\alpha$ and $\beta$ were fitted through the Rankine vortex model and the tangential wind profile (TWP) Gaussian model, respectively. $\alpha$ and $\beta$ control the rate of change of the tangential wind speed with radius. Subsequently, for the parametric representation of $\alpha$ and $\beta$, we extracted some TC wind filed parameters, such as maximum wind speed ($U_{\mathrm{m}}$), $R_{\mathrm{m}}$, the average wind speed at $R_{\mathrm{m}}$ ($U_{\mathrm{ma}}$), and the average radius of 17 m/s ($R_{17}$) and examined the relationship between $U_{\mathrm{ma}}$ and $U_{\mathrm{m}}$, the relationship between $R_{\mathrm{m}}$ and $R_{17}$, the relationship between $\alpha$, $U_{\mathrm{m}}$ and $R_{\mathrm{m}}$, and the relationship between $\beta$, $U_{\mathrm{m}}$ and $R_{\mathrm{m}}$. According to the results, the new radial wind profile models were proposed, i.e., SMAP Rankine Model-4 (SRM-4), SMAP Rankine Model-5 (SRM-5), and SMAP Gaussian Model-1 (SGM-1). A significant advantage of these models is that they can simulate average wind distribution through the conversion from $U_{\mathrm{m}}$ to $U_{\mathrm{ma}}$. Finally, comparisons were made between the new models and existing SRM-1, SRM-2, and SRM-3, according to the Advanced Microwave Scanning Radiometer 2 (AMSR-2) measurements of 126 TC cases. The results demonstrate that the SRM-4 simulated the radial wind profile best overall, with the lowest root mean-square error (RMSE) of 5.57 m/s, due to replacing the parameter $U_{\mathrm{m}}$ with $U_{\mathrm{ma}}$, using Rankine vortex for α parameterization and modeling with adequate data. Moreover, the models outperform in the Atlantic Ocean, with a RMSE of 5.37 m/s. The new models have the potential to make a contribution to the study of ocean surface dynamics and be used for forcing numerical models under TC conditions. Full article

This paper examines the impact of the urban context on the energy performance of a residential building in Athens. Current and future weather files were modified to consider the urban heat island, the overshadowing of adjacent buildings, and the modification of wind speed due to the effects of urban canyons. Dynamic thermal simulations were carried out using the modified weather files. The results indicate that there was a change in heating and cooling demand in comparison to using typical weather files; heating was reduced, but cooling was increased with a total increase in energy demand. There was variation due to height, while overshadowing impacts energy demand significantly. The modified weather analysis also indicates that there are periods in the year that cooling and heating are negligible. During these periods, passive strategies can be used to maintain good internal air quality if occupants are informed how to use their windows and shading devices according to prevailing weather conditions. A method of achieving this occupant-centric operation of the building is described, and the results of an intervention study are discussed. It shows that internal environmental quality can be improved by occupant actions based on forecast weather conditions to direct them. Full article

Multifractal analysis has been used in the exploration of soil grain size distributions (GSDs) in environmental and agricultural research. However, multifractal studies regarding the GSDs of sediments in braided delta-front are currently scarce. Open-source software designed for the realization of this technique has not yet been programmed. In this paper, the multifractal parameters of 61 GSDs from braided delta-front in the Paleogene Enping Formation in Huilu Low Uplift, Pearl River Mouth basin, are calculated and compared with traditional parameters. Multifractal generalized dimension spectrum curves are sigmoidal and decrease monotonically. Multifractal singularity spectrum curves are asymmetric, convex, and right-hook unimodal. The entropy dimension and singularity spectrum width ranges of silt-mudstones and gravelly sandstones are wider than those of fine and medium-coarse sandstones. The symmetry degree scopes from different lithologies are concentrated in distinguishing intervals. With the increase of grain sizes, the symmetry degree decreases overall. Both the symmetry degree and mean of GSDs are effective to distinguish the different lithologies from various depositional environments. A flexible and easy-to-use MATLAB (2021b)^® GUI (graphic user interface) package, MfGSD (Multifractal of GSD, V1.0), is provided to perform multifractal analysis on sediment GSDs. After raw GSDs imported into MfGSD, multifractal parameters are batch calculated and graphed in the interface. Then, all multifractal parameters can be exported to an Excel file, including entropy dimension, singularity spectrum, correlation dimension, symmetry degree of multifractal spectrum, etc. MfGSD is effective, and the multifractal parameters outputted from MfGSD are helpful to distinguish depositional environments of GSDs. MfGSD is open-source software that can be used to explore GSDs from various kinds of depositional environments, including water or wind deposits. Full article

Current building energy modeling (BEM) tools lack the capability to inherently simulate the impacts of urban microclimates on building energy performance. While efforts have been made to integrate BEM with Urban Microclimate Modeling (UMM) tools, their ability to capture spatial and seasonal microclimate variations remains limited. This review critically evaluates existing urban microclimate-integrated BEM approaches and their effectiveness in modeling the complex interactions between urban form, microclimate, and building energy performance. Through an analysis of 94 research articles, the review first examines the influence of urban form on microclimates, followed by an assessment of how microclimatic conditions impact building energy use. Additionally, it evaluates conventional modeling frameworks employed in BEM tools and their limitations in representing dynamic microclimatic variations. The findings emphasize the non-linear heat exchange relationships between urban form and microclimate, typically modeled using computationally intensive Computational Fluid Dynamics (CFD)-based UMM tools. This review introduces a classification of heat exchange types: atmospheric heat exchange, involving air temperature, wind, and humidity, and non-atmospheric heat exchange, driven by radiative interactions with surrounding urban surfaces. The study further highlights that modifying standard weather files and heat transfer coefficients alone is insufficient for BEM tools to accurately capture near-surface microclimate variations. By identifying critical insights and research gaps, this review establishes a foundation for advancing next-generation urban microclimate-integrated BEM approaches, emphasizing the need for computationally efficient and dynamically responsive modeling techniques. Full article

Recently, the single-cone hydraulic canal filling technique using bioceramic sealers was found to hinder retreatment due to the mechanical properties of the bioceramic sealers. This study assessed the effectiveness of four nickel–titanium rotary files in removing gutta-percha and bioceramic sealer from molar root canals in vitro. Eighty-eight root canals from extracted molars were instrumented with Vortex Blue rotary files and filled with gutta-percha and bioceramic sealer using a single-cone technique. After 30 days, the filled canals were randomly divided into four groups according to the file used for re-instrumentation: ProTaper Gold (PTG), Endo ReStart (ERS), XP-3D Shaper (XPD), and HyFlex Remover (HFR). This study assessed whether root canal filling material removal and patency were achieved within a 10-min time frame, recording the time required in seconds. The rate of regaining patency and the time required to achieve patency were compared among groups using a generalized linear model. Scanning electron microscopy was used to evaluate the mechanical changes to the files after use. The patency rate of XPD and HFR was significantly higher than PTG. ERS and XPD demonstrated shorter patency times than HFR and significantly shorter patency times than PTG. SEM images revealed a varied range of reverse windings across file groups. PTG and ERS exhibited microcracks and fractured tips, while XPD and HFR did not display these mechanical alterations. The four file systems in this study displayed varying levels of effectiveness in the retreatment of root canals filled with bioceramic sealers. Full article

In the field of wind turbine spindle bearing fault diagnosis, real-time monitoring of its operation is challenging. The state monitoring visualization is limited, fault data and sample labels are scarce, and fault data distribution varies under different operational conditions, leading to low diagnosis accuracy and slow diagnosis speed. To address these challenges, a wind turbine spindle bearing fault diagnosis method based on Unity 3D and transfer learning is proposed. Based on the characteristics of the wind turbine spindle bearing structure and operation, a digital twin model is established. The twin data transmit the necessary information to each module in various file formats. Additionally, the signal processing method (RB), combined with a random convolution layer and blind deconvolution, is employed to enhance the diversity of fault features. The processed signal is then fed into an improved residual network model with an efficient channel attention mechanism. Finally, the model incorporates related alignment and joint maximum mean difference for fault diagnosis. This model not only improves the extraction of key features but also adapts to edge and condition distributions through domain adaptation, enabling cross-domain identification. The digital twin system is implemented in Unity 3D, incorporating functions such as user login, wind turbine spindle bearing state monitoring, fault diagnosis, and fault warning, demonstrating practical applicability. Experimental results validate the effectiveness and superiority of the proposed method in fault diagnosis across various transfer learning tasks. Full article

To attain a low Energy Efficiency Design Index (EEDI), large ships possibly lack the necessary propulsion power to avoid stranding in case of strong adverse wind and wave conditions. To estimate this danger, here, the longitudinal and transverse drift force and the yaw drift moment caused by regular waves of arbitrary frequency and direction are computed using a 3-dimensional Rankine panel method. In many cases, drift forces are larger in shallow than in deep water. Therefore, the theory for computing drift force and moment is extended to shallow water. As published results for shallow water are lacking, the method is verified only for deep water by comparisons with results of model experiments and CFD computations for three ships. For one of them, the dependence of non-dimensional coefficients of longitudinal and transverse drift force and of the drift yaw moment on wave frequency, wave angle, water depth and ship speed is shown. The source files of the programs used for these computations may be obtained from the author if an adequate fee is donated to the Medecins Sans Frontieres or to the author. Full article

Based on the performance and acoustic data files of reduced-size open-rotor engines in low-speed wind tunnels, the static sound pressure level was derived by converting the 1-foot lossless spectral density into sound-pressure-level data, the background noise was removed, and the results were corrected according to the environmental parameters of the low-speed wind tunnels. In accordance with the requirements of Annex 16 of the Convention on International Civil Aviation Organization and Part 36 of the Civil Aviation Regulations of China on noise measurement procedures, the takeoff trajectory was physically modeled; the static noise source was mapped onto the takeoff trajectory to simulate the propagation process of the noise during takeoff; and the 24 one-third-octave center frequencies that corresponded to the SPL data were corrected for geometrical dispersion, atmospheric absorption, and Doppler effects, so that the takeoff noise could be corrected to represent a real environment. In addition, the audible processing of noise data with a 110° source pointing angle was achieved, which can be useful for enabling practical observers to analyze the noise characteristics. Full article

This paper proposes a correction technique for bad data and high-precision analysis based on micro-phasor measurement unit (μPMU) data for a stable and reliable smart substation. First, a high-precision wide-area monitoring system (WAMS) with 35 μPMUs installed at Korea’s Yeonggwang substation, which is connected to renewable energy sources (RESs), is introduced. Time-synchronized μPMU data are collected through the phasor data concentrator (PDC). A pre-processing program is implemented and utilized to integrate the raw data of each μPMU into a single comma-separated values (CSV) snapshot file based on the Timetag. After presenting the technique for identification and correction of event, duplicate, and spike bad data of μPMU, causal relationships are confirmed through the voltage and current fluctuations for a total of five states, such as T/L fault, tap-up, tap-down, generation, and generation shutdown. Additionally, the difference in active power between the T/L and the secondary side of the M.Tr is compared, and the fault ride through (FRT) regulations, when the fault in wind power generation (WP), etc., occurred, is analyzed. Finally, a statistical analysis, such as boxplot and kernel density, based on the instantaneous voltage fluctuation rate (IVFR) is conducted. As a result of the simulation evaluation, the proposed correction technique and precise analysis can accurately identify various phenomena in substations and reliably estimate causal relationships. Full article

This paper introduces a methodology aimed at bridging the gap between building energy simulation and urban climate modeling. A coupling method was developed through the Building Control Virtual Test Bed (BCVTB) and applied to a case study in Taipei City, Taiwan, to address the microclimate factors of street trees crucial to cooling energy consumption. The use of the Urban Weather Generator for weather file modification revealed a 0.63 °C average air temperature disparity. The coupling method emphasized the importance of accurate wind speed and convective heat transfer coefficients (CHTCs) on building surfaces in determining cooling energy. The results indicated that elevated CHTC values amplify heat exchange, with higher wind velocities playing a crucial role in heat dissipation. The presence of street trees was found to significantly reduce heat flux penetration, leading to a reduction in building surface temperatures by as much as 9.5% during hot months. The cooling energy was lowered by 16.7% in the BCVTB simulations that included trees compared to those without trees. The EnergyPlus-only simulations underestimated the cooling energy needs by approximately 9.3% during summer months. This research offers valuable insights into the complex interactions between buildings and their environments. The results highlight the importance of trees and shading in mitigating the heat island effect and improving energy-efficient urban planning. Full article

This paper describes the creation of a fast, deterministic, 3D fractal cloud renderer for the AFIT Sensor and Scene Emulation Tool (ASSET). The renderer generates 3D clouds by ray marching through a volume and sampling the level-set of a fractal function. The fractal function is distorted by a displacement map, which is generated using horizontal wind data from a Global Forecast System (GFS) weather file. The vertical windspeed and relative humidity are used to mask the creation of clouds to match realistic large-scale weather patterns over the Earth. Small-scale detail is provided by the fractal functions which are tuned to match natural cloud shapes. This model is intended to run quickly, and it can run in about 700 ms per cloud type. This model generates clouds that appear to match large-scale satellite imagery, and it reproduces natural small-scale shapes. This should enable future versions of ASSET to generate scenarios where the same scene is consistently viewed from both GEO and LEO satellites from multiple perspectives. Full article