Search Results (516)

Due to the sparse distribution of ship targets in wide-area offshore scenarios, the typical cascade mode of imaging and detection for space-borne Synthetic Aperture Radar (SAR) echo data would consume substantial computational time and resources, severely affecting the timeliness of ship target information acquisition tasks. Therefore, we propose a ship target integrated imaging and detection framework (ST-IIDF) for SAR oceanic region data. A two-step filtering structure is added in the SAR imaging process to extract the potential areas of ship targets, which can accelerate the whole process. First, an improved peak-valley detection method based on one-dimensional scattering characteristics is used to locate the range gate units for ship targets. Second, a dynamic quantization method is applied to the imaged range gate units to further determine the azimuth region. Finally, a lightweight YOLO neural network is used to eliminate false alarm areas and obtain accurate positions of the ship targets. Through experiments on Hisea-1 and Pujiang-2 data, within sparse target scenes, the framework maintains over 90% accuracy in ship target detection, with an average processing speed increase of 35.95 times. The framework can be applied to ship target detection tasks with high timeliness requirements and provides an effective solution for real-time onboard processing. Full article

With the wide application of airdrop technology in rescue activities in civil and aerospace fields, the importance of accurate airdrop is increasing. This work comprehensively analyzes the interactive mechanisms among multiple models affecting airdrops, including wind field distribution, drag force effect, and the parachute opening process. By integrating key parameters across various dimensions of these models, a multidimensional parameter dynamic evolution (MPDE) target prediction method for aerial delivery parachutes in radar-detected wind fields is proposed, and the Runge–Kutta method is applied to dynamically solve for the final landing point of the target. In order to verify the performance of the method, this work carries out field airdrop experiments based on the radar-measured meteorological data. To evaluate the impact of model input errors on prediction methods, this work analyzes the influence mechanism of the wind field detection error on the airdrop prediction method via the Relative Gain Array (RGA) and verifies the analytical results using the numerical simulation method. The experimental results indicate that the optimized MPDE method exhibits higher accuracy than the widely used linear airdrop target prediction method, with the accuracy improved by 52.03%. Additionally, under wind field detection errors, the linear prediction method demonstrates stronger robustness. The airdrop error shows a trigonometric relationship with the angle between the synthetic wind direction and the heading, and the phase of the function will shift according to the difference in errors. The sensitivity of the MPDE method to wind field errors is positively correlated with the size of its object parachute area. Full article

Space-based radar systems offer significant advantages for air surveillance, including wide-area coverage and extended early-warning capabilities. The integrated design of detection and imaging in space-based wideband radar further enhances its accuracy. However, in the wideband tracking mode, large aircraft targets exhibit extended characteristics. Measurements from the same target cross multiple range resolution cells. Additionally, the nonlinear observation model and uncertain measurement noise characteristics under space-based long-distance observation substantially increase the tracking complexity. To address these challenges, we propose a robust aerial target tracking method for space-based wideband radar applications. First, we extend the observation model of the gamma Gaussian inverse Wishart probability hypothesis density filter to three-dimensional space by incorporating a spherical–radial cubature rule for improved nonlinear filtering. Second, variational Bayesian processing is integrated to enable the joint estimation of the target state and measurement noise parameters, and a recursive process is derived for both Gaussian and Student’s t-distributed measurement noise, enhancing the method’s robustness against noise uncertainty. Comprehensive simulations evaluating varying target extension parameters and noise conditions demonstrate that the proposed method achieves superior tracking accuracy and robustness. Full article

Arc scanning synthetic aperture radar (ArcSAR) can achieve high-resolution panoramic imaging and retrieve submillimeter-level deformation information. To monitor buildings in a city scenario, ArcSAR must be lightweight; have a high resolution, a mid-range (around a hundred meters), and low power consumption; and be cost-effective. In this study, a novel high-resolution wide-beam single-chip millimeter-wave (mmwave) ArcSAR system, together with an imaging algorithm, is presented. First, to handle the non-uniform azimuth sampling caused by motor motion, a high-accuracy angular coder is used in the system design. The coder can send the radar a hardware trigger signal when rotated to a specific angle so that uniform angular sampling can be achieved under the unstable rotation of the motor. Second, the ArcSAR’s maximum azimuth sampling angle that can avoid aliasing is deducted based on the Nyquist theorem. The mathematical relation supports the proposed ArcSAR system in acquiring data by setting the sampling angle interval. Third, the range cell migration (RCM) phenomenon is severe because mmwave radar has a wide azimuth beamwidth and a high frequency, and ArcSAR has a curved synthetic aperture. Therefore, the fourth-order RCM model based on the range-Doppler (RD) algorithm is interpreted with a uniform azimuth angle to suit the system and implemented. The proposed system uses the TI 6843 module as the radar sensor, and its azimuth beamwidth is 64°. The performance of the system and the corresponding imaging algorithm are thoroughly analyzed and validated via simulations and real data experiments. The output image covers a 360° and 180 m area at an azimuth resolution of 0.2°. The results show that the proposed system has good application prospects, and the design principles can support the improvement of current ArcSARs. Full article

Irrigation areas in arid regions are vital production areas for grain and cash crops worldwide. Grasping the temporal and spatial evolution of planting configurations across several years is crucial for effective regional agricultural and resource management. In view of problems such as insufficient optical images caused by cloudy weather in arid regions and the unclear spatiotemporal evolution patterns of the planting structures in irrigation areas over the years, in this study, we took the Santun River Irrigation Area, a typical arid region in Xinjiang, China, as an example. By leveraging long time-series remote sensing images from Sentinel-1 and Sentinel-2, the spectral, index, texture, and polarization features of the ground objects in the study area were extracted. When analyzing the index characteristics, we considered several widely used global vegetation indices, including the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Soil Adjusted Vegetation Index (SAVI), and Global Environment Monitoring Index (GEMI). Additionally, we integrated the vertical–vertical and vertical–horizontal polarization data obtained from synthetic aperture radar (SAR) satellite systems. Machine learning algorithms, including the random forest algorithm (RF), Classification and Regression Trees (CART), and Support Vector Machines (SVM), were employed for planting structure classification. The optimal classification model selected was subjected to inter-annual transfer to obtain the planting structures over multiple years. The research findings are as follows: (1) The RF classification algorithm outperforms CART and SVM algorithms in terms of classification accuracy, achieving an overall accuracy (OA) of 0.84 and a kappa coefficient of 0.805. (2) The cropland area classified by the RF algorithm exhibited a high degree of consistency with statistical yearbook data (R² = 0.82–0.91). Significant differences are observed in the estimated planting areas of cotton, maize, tomatoes, and wheat, while differences in other crops are not statistically significant. (3) From 2019 to 2024, cotton remained the dominant crop, although its proportional area fluctuated considerably, while the areas of maize and wheat tended to remain stable, and those of tomato and melon showed relatively minor changes. Overall, the region demonstrates a cotton-dominated, stable cropping structure for other crops. The newly developed framework exhibits exceptional precision in categorization while maintaining impressive adaptability, offering crucial insights for optimizing agricultural operations and sustainable resource allocation in irrigation-dependent arid zones. Full article

Mono RGB cameras and automotive radar sensors provide a complementary information set that makes them excellent candidates for sensor data fusion to obtain robust traffic user detection. This has been widely used in the vehicle domain and recently introduced in roadside-mounted smart infrastructure-based road user detection. However, the performance of the most commonly used late fusion methods often degrades when the camera fails to detect road users in adverse environmental conditions. The solution is to fuse the data using deep neural networks at the early stage of the fusion pipeline to use the complete data provided by both sensors. Research has been carried out in this area, but is limited to vehicle-based sensor setups. Hence, this work proposes a novel deep neural network to jointly fuse RGB mono-camera images and 3D automotive radar point cloud data to obtain enhanced traffic user detection for the roadside-mounted smart infrastructure setup. Projected radar points are first used to generate anchors in image regions with a high likelihood of road users, including areas not visible to the camera. These anchors guide the prediction of 2D bounding boxes, object categories, and confidence scores. Valid detections are then used to segment radar points by instance, and the results are post-processed to produce final road user detections in the ground plane. The trained model is evaluated for different light and weather conditions using ground truth data from a lidar sensor. It provides a precision of 92%, recall of 78%, and F1-score of 85%. The proposed deep fusion methodology has 33%, 6%, and 21% absolute improvement in precision, recall, and F1-score, respectively, compared to object-level spatial fusion output. Full article

Coal mines play an important role in the global energy supply. Monitoring the displacement of open-pit mines is crucial to preventing geological disasters, such as landslides and surface displacement, caused by high-intensity mining activities. In recent years, multi-temporal Synthetic Aperture Radar Interferometry (InSAR) technology has advanced and become widely used for monitoring the displacement of open-pit mines. However, the scattering characteristics of surfaces in open-pit mining areas are unstable, resulting in few coherence points with uneven distribution. Small BAseline Subset InSAR (SABS-InSAR) technology struggles to extract high-density points and fails to capture the overall displacement trend of the monitoring area. To address these challenges, this study focused on the Shengli West No. 2 open-pit coal mine in eastern Inner Mongolia, China, using 201 Sentinel-1 images collected from 20 May 2017 to 13 April 2024. We applied both SBAS-InSAR and distributed scatterer InSAR (DS-InSAR) methods to investigate the surface displacement and long-term behavior of the open-pit coal mine over the past seven years. The relationship between this displacement and mining activities was analyzed. The results indicate significant land subsidence was observed in reclaimed areas, with rates exceeding 281.2 mm/y. The compaction process of waste materials was the main contributor to land subsidence. Land uplift or horizontal displacement was observed over the areas near the active working parts of the mines. Compared to SBAS-InSAR, DS-InSAR was shown to more effectively capture the spatiotemporal distribution of surface displacement in open-pit coal mines, offering more intuitive, comprehensive, and high-precision monitoring of open-pit coal mines. Full article

Cultural tourism can act as a driver for inner area development, bringing about a range of socio-economic benefits through economic stimulation, quality of life improvement, and cultural heritage preservation. Inner territories, set apart by geographic marginality and low population density, hold a rich cultural and environmental heritage that, however, remains off the radar and left behind. Guided by the principles of endogenous local development, this article seeks to contribute to the existing body of research by proposing potential strategies for local growth rooted in cultural tourism. From this perspective, we identified the Basilicata region (Southern Italy) as a proper test area. The region is rich in archaeological, monumental and museum evidence, but is characterized, except in a few areas, by a low rate of tourist turnout. Through a replicable, comprehensive, and flexible methodology—drawing on bibliographic research, analysis of archaeological, archival, erudite and antiquarian sources, and carrying out field surveys—the different points of interest in the region have been brought together under specific cultural themes. Results include the design of three detailed routes (Via Herculia, Frederick II’s, and St Michael’s cultural routes) useful for three different types of tourism (sustainable, emotional, and accessible). Possible scenarios for valorization and fruition are also proposed, paying particular attention to digital technologies. Thus, this research aligns with Sustainable Development Goals (SDGs) 8 and 11 promoting cultural heritage valorization and preservation, shoring up economic revitalization, stepping up community engagement, and pushing forward environmentally friendly tourism practices. Research findings can attract the interest of a wide range of stakeholders such as tourism professionals, local authorities, cultural and creative industries, local communities and entrepreneurs, as well as academics and researchers. The methodological approach can be considered for the valorization and tourist enjoyment of inner areas in other countries, with particular focus on those falling within the Mediterranean region which is rich in cultural heritage, environmental value, and socio-economic potential. Full article

Monitoring the amount of waste in open landfill sites in developing countries is important from the perspective of building a sustainable society and protecting the environment. Some landfill sites provide information on the amount of waste in reports and news articles; however, in many cases, the survey methods, timing, and accuracy are uncertain, and there are many sites for which this information is not available. In this context, monitoring the amount of waste using satellite data is extremely useful from the perspective of uniformity, objectivity, low cost, safety, wide coverage area, and simultaneity. In this study, we developed a method for calculating the relative volume of waste at 15 landfill sites in six developing countries using time-series digital surface model (DSM) data from the satellite optical sensor, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), which has accumulated more than 20 years of observational data. Unnecessary variations between images were reduced by bias correction based on a reference area around the site. In addition, by utilizing various reported values, we introduced a method for converting relative volume to absolute volume and converting volume to weight, enabling a direct comparison with reported values. We also evaluated our method compared with the existing method for calculating changes in waste volume based on TanDEM-X DEM Change Map (DCM) products. The findings of this study demonstrated the efficacy of the employed method in capturing changes, such as increases and stagnation, in the amount of waste deposited. The method was found to be relatively consistent with reported values and those obtained using the DCM, though a decrease in accuracy was observed due to the depositional environment and the absence of data. The results of this study are expected to be used in the future for technology that combines an optical sensor and synthetic aperture radar (SAR) to monitor the amount of waste. Full article

Ultra-wide swath synthetic aperture radar (SAR) systems are of great significance for applications such as terrain measurement and ocean monitoring. In conventional SAR systems, targets echo from the near-range and far-range of an observed swath mutually overlap, and the blind ranges are caused by those that the radar cannot receive while it is transmitting. Therefore, the swath of conventional SAR systems is limited due to their range ambiguity as well as the transmitted pulse blockage. With the development of waveform diversity, range ambiguity can be suppressed by radar waveform design with a low-range sidelobe without increasing the system’s complexity when compared to the scan-on-receive (SCORE) based on digital beamforming (DBF) technique. Additionally, by optimizing the pulse repetition interval (PRI) variation strategy, the negative impact of blind range on imaging can be reduced. Based on these technologies, this paper proposes a theoretical architecture to achieve an ultra-wide swath SAR imaging system via chaotic frequency modulation (FM) signals and a random pulse repetition interval variation strategy without increasing the antenna area. By transmitting time-variant chaotic-FM signals, the interference between targets in the near range and far range can be reduced by the corresponding match filters. Furthermore, random pulse repetition intervals increase the irregularity and aperiodicity of the blind ranges to further improve the imaging quality. Simulation results demonstrate that the proposed wide-swath SAR system has better performance compared to classical SAR systems. Full article

Soil erosion poses a significant global environmental challenge, causing land degradation, deforestation, river siltation, and reduced agricultural productivity. Although the Revised Universal Soil Loss Equation (RUSLE) has been widely applied in Brazil, its use in the tropical river basins of the Amazon remains limited. This study aimed to apply a GIS-integrated RUSLE model and compare its soil loss estimates with multiple linear regression (MLR) models based on terrain attributes, aiming to identify priority areas and key geomorphometric drivers of soil erosion in a tropical Amazonian river basin. A digital elevation model based on Shuttle Radar Topography Mission (SRTM) data, land use and land cover (LULC) maps, and rainfall and soil data were applied to the GIS-integrated RUSLE model; we then defined six risk classes—slight (0–2.5 t ha⁻¹ yr⁻¹), slight–moderate (2.5–5), moderate (5–10), moderate–high (10–15), high (15–25), and very high (>25)—and identified priority zones as those in the top two risk classes. The Caeté River Basin (CRB) was classified into six erosion risk categories: low (81.14%), low to moderate (2.97%), moderate (11.88%), moderate to high (0.93%), high (0.03%), and very high (3.05%). The CRB predominantly exhibited a low erosion risk, with higher erosion rates linked to intense rainfall, gentle slopes covered by Arenosols, and human activities. The average annual soil loss was estimated at 2.0 t ha⁻¹ yr⁻¹, with a total loss of 1005.44 t ha⁻¹ yr⁻¹. Additionally, geomorphological and multiple linear regression (MLR) analyses identified seven key variables influencing soil erosion: the convergence index, closed depressions, the topographic wetness index, the channel network distance, and the local curvature, upslope curvature, and local downslope curvature. These variables collectively explained 26% of the variability in soil loss (R² = 0.26), highlighting the significant role of terrain characteristics in erosion processes. These findings indicate that soil erosion control efforts should focus primarily on areas with Arenosols and regions experiencing increased anthropogenic activity, where the erosion risks are higher. The identification of priority erosion areas enables the development of targeted conservation strategies, particularly for Arenosols and regions under anthropogenic pressure, where the soil losses exceed the tolerance threshold of 10.48 t ha⁻¹ yr⁻¹. These findings directly support the formulation of local environmental policies aimed at mitigating soil degradation by stabilizing vulnerable soils, regulating high-impact land uses, and promoting sustainable practices in critical zones. The GIS-RUSLE framework is supported by consistent rainfall data, as verified by a double mass curve analysis (R² ranging from 0.64 to 0.77), and offers a replicable methodology for soil conservation planning in tropical basins with similar erosion drivers. This approach offers a science-based foundation to guide soil conservation planning in tropical basins. While effective in identifying erosion-prone areas, it should be complemented in future studies by dynamic models and temporal analyses to better capture the complex erosion processes and land use change impacts in the Amazon. Full article

Iraq faces significant challenges in sustainable water resource management, due to intensive agriculture and climate change. Modern irrigation leads to depleted natural springs and abandoned traditional canal systems, creating a nexus between climate, water availability, agriculture, and cultural heritage. This work unveils this nexus holistically, from the regional to the local scale, and by considering all the components of the nexus. This is achieved by combining five decades (1974–2024) of satellite data—including declassified HEXAGON KH-9, Copernicus Sentinel-1/2/3, COSMO-SkyMed radar, and PlanetScope’s Dove optical imagery—and on-the-ground observations (photographic and drone surveying). The observed landscape changes are categorised as “proxies” to infer the presence of the given land processes that they correlate to. The whole of southern Iraq is afflicted by dust storms and intense evapotranspiration; new areas are desertifying and thus becoming local sources of dust in the southwest of the Euphrates floodplain and close to the boundary with the western desert. The most severe transformations happened around springs between Najaf Sea and Hammar Lake, where centre-pivot and herringbone irrigation systems fed by pumped groundwater have densified. While several instances of run-off and discharge highlight the loss of water in the western side of the study area, ~5 km² wide clusters of crops in the eastern side suffer from water scarcity and are abandoned. Here, new industrial activities and modern infrastructure have already damaged tens of archaeological sites. Future monitoring based on the identified proxies could help to assess improvements or deterioration, in light of mitigation measures. Full article

Rogue waves are reported to wreck ships and claim lives. The prompt detection of their presence is difficult due to their small footprint and unpredictable emergence. The retrieval of sea surface height via remote sensing techniques provides a viable solution for detecting rogue waves. However, conventional synthetic aperture radar (SAR) techniques are ineffective at retrieving the surface height profile of rogue waves in real time due to nonlinearity between surface height and normalized radar cross-section (NRCS), which is not obvious in the absence of rogue waves. In this work, a cross-track interferometric SAR (XTI-SAR) imaging approach is proposed to detect elusive rogue waves over a wide area, with sea-surface profiles embedding rogue waves simulated using a probability-based model. The performance of the proposed imaging approach is evaluated in terms of errors in the position and height of rogue-wave peaks, the footprint area of rogue waves, and a root-mean-square error (RMSE) of the sea-surface height profile. Different rogue-wave events under different wind speeds are simulated, and the reconstructed height profiles are analyzed to determine the proper ranges of look angle, baseline, and mean-filter size, among other operation variables, in detecting rogue waves. The proposed approach is validated by simulations in detecting a rogue wave at a spatial resolution of 3 m × 3 m and height accuracy of decimeters. Full article

Ground-based interferometric radar (GBIR) is a powerful remote sensing technique used for infrastructure monitoring, particularly in the field of bridge structural health monitoring (SHM). Despite its high resolution and rapid data acquisition and the availability of various commercial systems, GBIR has not yet been fully recognised or routinely adopted in standard bridge monitoring practices. This study presents a comprehensive review of GBIR technologies and methods historically applied in bridge SHM. A total of 104 peer-reviewed papers were selected through a systematic review process, encompassing 128 monitored bridges assessed using a wide range of GBIR systems. The applications of GBIR across different bridge materials and operational conditions are discussed in detail. The review shows that 76% of GBIR applications focus on roadway and railway bridges. In terms of materials, steel and concrete bridges dominate the dataset, accounting for 95% of the total, while masonry bridges represent only 5%. The GBIR system types examined in this study are categorised into six main groups based on their technical specifications, with their key characteristics and capabilities analysed. The review also investigates bridge feature extraction techniques, revealing a predominant focus on identifying natural frequencies, while fewer studies explore the extraction of damping ratios and structural mode shapes. Furthermore, the integration of GBIR with other sensing technologies—particularly accelerometers—is explored, highlighting opportunities for complementary sensor fusion. Overall, this study provides a comprehensive overview of the current state of practice and identifies key areas for future research and technological development. Full article

Permanent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR), with millimeter-level accuracy and full-resolution capabilities, is essential for monitoring urban deformation. With the advancement of SAR sensors in spatial and temporal resolution and the expansion of wide-swath observation capabilities, the number of permanent scatterers (PSs) in high-density urban areas has surged exponentially. To address these computational and memory challenges in high-density urban PSInSAR processing, this paper proposes an efficient method for integrating regular grid partitioning and connected component constraints. First, adaptive dynamic regular grid partitioning was employed to divide monitoring areas into sub-blocks, balancing memory usage and computational efficiency. Second, a weighted least squares adjustment model using common PS points in overlapping regions eliminated systematic inter-sub-block biases, ensuring global consistency. A graph-based connected component constraint mechanism was introduced to resolve multi-component segmentation issues within sub-blocks to preserve discontinuous PS information. Experiments on TerraSAR-X data covering Fuzhou, China (590 km²), demonstrated that the method processed 1.4 × 10⁷ PS points under 32 GB memory constraints, where it achieved a 25-fold efficiency improvement over traditional global PSInSAR. The deformation rates and elevation residuals exhibited high consistency with conventional methods (correlation coefficient ≥ 0.98). This method effectively addresses the issues of memory overflow, connectivity loss between sub-blocks, and cumulative merging errors in large-scale PS networks. It provides an efficient solution for wide-area millimeter-scale deformation monitoring in high-density urban areas, supporting applications such as geohazard early warning and urban infrastructure safety assessment. Full article