Search Results (781)

The identification of structural damage types remains a key challenge in electromechanical impedance/admittance (EMI/EMA)-based structural health monitoring realm. This paper proposed a damage classification approach for concrete structures by using integrating discrete wavelet transform (DWT) decomposition of EMA signatures with supervised machine learning. In this approach, the EMA signals of arranged piezoelectric ceramic (PZT) patches were successively measured at initial undamaged and post-damaged states, and the signals were decomposed and processed using the DWT technique to derive indicators including the wavelet energy, the variance, the mean, and the entropy. Then these indicators, incorporated with traditional ones including root mean square deviation (RMSD), baseline-changeable RMSD named RMSDk, correlation coefficient (CC), and mean absolute percentage deviation (MAPD), were processed by a support vector machine (SVM) model, and finally damage type could be automatically classified and identified. To validate the approach, experiments on a full-scale reinforced concrete (RC) slab and application to a practical tunnel segment RC slab structure instrumented with multiple PZT patches were conducted to classify severe transverse cracking and minor crack/impact damages. Experimental and application results cogently demonstrated that the proposed DWT-based approach can precisely classify different types of damage on concrete structures with higher accuracy than traditional ones, highlighting the potential of the DWT-decomposed EMA signatures for damage characterization in concrete infrastructure. Full article

Monitoring soil moisture (SM) using permanently installed gamma radiation (GR) detectors is a promising non-invasive method based on the inverse relationship between SM and soil-emitted GR. In a previous study, we successfully estimated SM from environmental gamma radiation (EGR) measured by a low-cost counter-tube detector. Since this detector type provides a bulk GR response across a wide energy range, EGR signals are influenced by several confounding factors, e.g., soil radon emanation, biomass. To what extent these confounding factors deteriorate the accuracy of SM estimates obtained from EGR is not fully understood. Therefore, the aim of this study was to compare the accuracy of SM estimates from EGR with those from reference ⁴⁰K GR (1460 keV) measurements which are much less influenced by these factors. For this, a Geiger–Mueller counter (G–M), which is commonly used for EGR monitoring, and a gamma spectrometer were installed side by side in an agricultural field equipped with in situ sensors to measure reference SM and a meteorological station. The EGR_G–M and spectrometry-based ⁴⁰K measurements were related to reference SM using a functional relationship derived from theory. We found that daily SM can be predicted with an RMSE of 3.39 vol. % from ⁴⁰K using the theoretical value of α = 1.11 obtained from the effective ratio of GR mass attenuation coefficients for the water and solid phase. A lower accuracy was achieved for the EGR_G–M measurements (RMSE = 6.90 vol. %). Wavelet coherence analysis revealed that the EGR_G–M measurements were influenced by radon-induced noise in winter. Additionally, biomass shielding had a stronger impact on EGR_G–M than on ⁴⁰K GR estimates of SM during summer. In summary, our study provides a better understanding on the lower prediction accuracy of EGR_G–M and suggests that correcting for biomass can improve SM estimation from the bulk EGR data of operational radioactivity monitoring networks. Full article

Natural gas storage is an effective solution to address the energy supply–demand imbalance, and underground gas storage (UGS) is a primary method for storing natural gas. The overarching goal of this study is to monitor and analyze surface deformation at the Hutubi underground gas storage facility in Xinjiang, China, which is the largest gas storage facility in the country. This research aims to ensure the stable and efficient operation of the facility through long-term monitoring, using remote sensing data and advanced modeling techniques. The study employs the SBAS-InSAR method, leveraging Synthetic Aperture Radar (SAR) data from the TerraSAR and Sentinel-1 sensors to observe displacement time series from 2013 to 2024. The data is processed through wavelet transformation for denoising, followed by the application of a Gray Wolf Optimization (GWO) algorithm combined with Variational Mode Decomposition (VMD) to decompose both surface deformation and gas pressure data. The key focus is the development of a high-precision predictive model using a Gated Recurrent Unit (GRU) network, referred to as GWO-VMD-GRU, to accurately predict surface deformation. The results show periodic surface uplift and subsidence at the facility, with a notable net uplift. During the period from August 2013 to March 2015, the maximum uplift rate was 6 mm/year, while from January 2015 to December 2024, it increased to 12 mm/year. The surface deformation correlates with gas injection and extraction periods, indicating periodic variations. The accuracy of the InSAR-derived displacement data is validated through high-precision GNSS data. The GWO-VMD-GRU model demonstrates strong predictive performance with a coefficient of determination (R²) greater than 0.98 for the gas well test points. This study provides a valuable reference for the future safe operation and management of underground gas storage facilities, demonstrating significant contributions to both scientific understanding and practical applications in underground gas storage management. Full article

Land desertification represents a significant and sensitive global ecological issue. In the Inner Mongolia region of China, soil desertification and salinization are widespread, resulting from the combined effects of extreme drought conditions and human activities. Using Gaofen 5B AHSI imagery as our data source, we collected spectral data for seven distinct land cover types: lush vegetation, yellow sand, white sand, saline soil, saline shell, saline soil with saline vegetation, and sandy soil. We applied Particle Swarm Optimization (PSO) to fine-tune the Wavelet Packet (WP) decomposition levels, thresholds, and wavelet basis function, ensuring optimal spectral decomposition and reconstruction. Subsequently, PSO was deployed to optimize key hyperparameters of the Random Forest algorithm and compare its performance with the ResNet-Transformer model. Our results indicate that PSO effectively automates the search for optimal WP decomposition parameters, preserving essential spectral information while efficiently reducing high-frequency spectral noise. The Genetic Algorithm (GA) was also found to be effective in extracting feature bands relevant to land desertification, which enhances the classification accuracy of the model. Among all the models, integrating wavelet packet denoising, genetic algorithm feature selection, the first-order differential (FD), and the hybrid architecture of the ResNet-Transformer, the WP-GA-FD-ResNet-Transformer model achieved the highest accuracy in extracting soil sandification and salinization, with Kappa coefficients and validation set accuracies of 0.9746 and 97.82%, respectively. This study contributes to the field by advancing hyperspectral desertification monitoring techniques and suggests that the approach could be valuable for broader ecological conservation and land management efforts. Full article

Aflatoxin B₁ (AFB₁) contamination in corn silage poses significant risks to livestock and human health. This study developed a non-destructive detection method for AFB₁ using color-sensitive arrays (CSAs). Twenty self-developed CSAs were employed to react with samples, with reflectance spectra collected using a portable spectrometer. Spectral data were optimized through seven preprocessing methods, including Standard Normal Variate (SNV), Multiplicative Scatter Correction (MSC), first-order derivative (1st D), second-order derivative (2nd D), wavelet denoising, and their combinations. Key variables were selected using five feature selection algorithms: Competitive Adaptive Reweighted Sampling (CARS), Principal Component Analysis (PCA), Random Forest (RF), Uninformative Variable Elimination (UVE), and eXtreme Gradient Boosting (XGBoost). Five machine learning models were constructed: Light Gradient Boosting Machine (LightGBM), XGBoost, Support Vector Regression (SVR), RF, and K-Nearest Neighbor (KNN). The results demonstrated significant AFB₁-responsive characteristics in three dyes: (2,3,7,8,12,13,17,18-octaethylporphynato)chloromanganese(III) (Mn(OEP)Cl), Bromocresol Green, and Cresol Red. The combined 1st D-PCA-KNN model showed optimal prediction performance, with determination coefficient ($R_p^2$ = 0.87), root mean square error (RMSEP = 0.057), and relative prediction deviation (RPD = 2.773). This method provides an efficient solution for silage AFB₁ monitoring. Full article

Breast cancer remains one of the leading causes of mortality among women worldwide, highlighting the critical need for early and accurate detection methods. Traditional mammography, although widely used, has limitations, including radiation exposure and challenges in detecting early-stage lesions. Electrical Impedance Mammography (EIM) has emerged as a non-invasive and radiation-free alternative that assesses the density and electrical conductivity of breast tissue. EIM images consist of seven layers, each representing different tissue depths, offering a detailed representation of the breast structure. However, analyzing these layers individually can be redundant and complex, making it difficult to identify relevant features for lesion classification. To address this issue, advanced computational techniques are employed for image integration, such as the Root Mean Square ($C_{\mathrm{RMS}}$) Contrast and Contrast-Limited Adaptive Histogram Equalization (CLAHE), combined with the Coefficient of Variation (CV), CLAHE-based fusion, weighted average fusion, Gaussian pyramid fusion, and Wavelet–PCA fusion. Each method enhances the representation of tissue features, optimizing the image quality and diagnostic utility. This study evaluated the impact of these integration techniques on EIM image analysis, aiming to improve the accuracy and reliability of computational diagnostic models for breast cancer detection. According to the obtained results, the best performance was achieved using Wavelet–PCA fusion in combination with XGBoost as a classifier, yielding an accuracy rate of 89.5% and an F1-score of 81.5%. These results are highly encouraging for the further investigation of this topic. Full article

Wearable laser Doppler devices are susceptible to complex noise interferences, such as Gaussian white noise, baseline drift, and motion artifacts, with motion artifacts significantly impacting clinical diagnostic accuracy. Addressing the limitations of existing denoising methods—including traditional adaptive filtering that relies on prior noise information, modal decomposition techniques that depend on empirical parameter optimization and are prone to modal aliasing, wavelet threshold functions that struggle to balance signal preservation with smoothness, and the high computational complexity of deep learning approaches—this paper proposes an ISSA-VMD-AWPTD denoising algorithm. This innovative approach integrates an improved sparrow search algorithm (ISSA), variational mode decomposition (VMD), and adaptive wavelet packet threshold denoising (AWPTD). The ISSA is enhanced through cubic chaotic mapping, butterfly optimization, and sine–cosine search strategies, targeting the minimization of the envelope entropy of modal components for adaptive optimization of VMD’s decomposition levels and penalty factors. A correlation coefficient-based selection mechanism is employed to separate target and mixed modes effectively, allowing for the efficient removal of noise components. Additionally, an exponential adaptive threshold function is introduced, combining wavelet packet node energy proportion analysis to achieve efficient signal reconstruction. By leveraging the rapid convergence property of ISSA (completing parameter optimization within five iterations), the computational load of traditional VMD is reduced while maintaining the denoising accuracy. Experimental results demonstrate that for a 200 Hz test signal, the proposed algorithm achieves a signal-to-noise ratio (SNR) of 24.47 dB, an improvement of 18.8% over the VMD method (20.63 dB), and a root-mean-square-error (RMSE) of 0.0023, a reduction of 69.3% compared to the VMD method (0.0075). The processing results for measured human blood flow signals achieve an SNR of 24.11 dB, a RMSE of 0.0023, and a correlation coefficient (R) of 0.92, all outperforming other algorithms, such as VMD and WPTD. This study effectively addresses issues related to parameter sensitivity and incomplete noise separation in traditional methods, providing a high-precision and low-complexity real-time signal processing solution for wearable devices. However, the parameter optimization still needs improvement when dealing with large datasets. Full article

Background/Objectives: Emotion and cognition, two essential components of human mental processes, have traditionally been studied independently. The exploration of emotion and cognition is fundamental for gaining an understanding of human mental functioning. Despite the availability of various methods to measure and evaluate emotional states and cognitive processes, physiological measurements are considered to be one of the most reliable methods due to their objective approach. In particular, electroencephalography (EEG) provides unique insight into emotional and cognitive activity through the analysis of event-related potentials (ERPs). In this study, we discriminated pleasant/unpleasant emotional moods and low/high cognitive states using graph-theoretic features extracted from spatio-temporal components. Methods: Emotional data were collected at the Physiology Department of Istanbul Medical Faculty at Istanbul University, whereas cognitive data were obtained from the DepositOnce repository of Technische Universität Berlin. Wavelet coherence values for the N100, N200, and P300 single-trial ERP components in the delta, theta, alpha, and beta frequency bands were investigated individually. Then, graph-theoretic analyses were performed using wavelet coherence-based connectivity maps. Global and local graph metrics such as energy efficiency, strength, transitivity, characteristic path length, and clustering coefficient were used as features for classification using support vector machines (SVMs), k-nearest neighbor(K-NN), and linear discriminant analysis (LDA). Results: The results show that both pleasant/unpleasant emotional moods and low/high cognitive states can be discriminated, with average accuracies of up to 92% and 89%, respectively. Conclusions: Graph-theoretic metrics based on wavelet coherence of ERP components in the delta band with the SVM algorithm allow for the discrimination of emotional and cognitive states with high accuracy. Full article

Partial discharge (PD) in insulators will not only lead to the gradual degradation of insulation performance but even cause power system failure in serious cases. Because there is strong noise interference in the field, it is difficult to accurately locate the position of the PD source. Therefore, this paper proposes a three-dimensional spatial localization method of the PD source with a four-element ultra-high-frequency (UHF) array based on improved wavelet packet dynamic threshold denoising and the $G_{xx}-\beta$ generalized cross-correlation algorithm. Firstly, considering the field noise interference, the PD signal is decomposed into sub-signals with different frequency bands by the wavelet packet, and the corresponding wavelet packet coefficients are extracted. By using the improved threshold function to process the wavelet packet coefficients, the PD signal with low distortion rate and high signal-to-noise ratio (SNR) is reconstructed. Secondly, in order to solve the problem that the amplitude of the first wave of the PD signal is small and the SNR is low, an improved weighting function, $G_{xx}-\beta$, is proposed, which is based on the self-power spectral density of the signal and is adjusted by introducing an exponential factor to improve the accuracy of the first wave arrival time and time difference calculation. Finally, the influence of different sensor array shapes and PD source positions on the localization results is analyzed, and a reasonable arrangement scheme is found. In order to verify the performance of the proposed method, simulation and experimental analysis are carried out. The results show that the improved wavelet packet denoising algorithm can effectively realize the separation of PD signal and noise and improve the SNR of the localization signal with low distortion rate. The improved $G_{xx}-\beta$ weighting function significantly improves the estimation accuracy of the time difference between UHF sensors. With the sensor array designed in this paper, the relative localization error is 3.46%, and the absolute error is within 6 cm, which meets the requirements of engineering applications. Full article

Deep tight sandstone reservoirs are characterized by low porosity and permeability, complex pore structure, and strong heterogeneity. Conducting research on the heterogeneity characteristics of reservoirs could lay a foundation for evaluating their effectiveness and accurately identifying advantageous reservoirs, which is of great significance for searching for “sweet spot” oil and gas reservoirs in tight reservoirs. In this study, the deep tight sandstone reservoir in the Dibei area, northern Kuqa depression, Tarim Basin, China, is taken as the research object. Firstly, statistical methods are used to calculate the coefficient of variation (CV) and coefficient of heterogeneity (TK) of core permeability, and the heterogeneity within the reservoir is evaluated by analyzing the variations in the reservoir permeability. Then, based on fractal theory, the fractal and multifractal parameters of the GR and acoustic logs are calculated using the box dimension, correlation dimension, and the wavelet leader methods. The results show that the heterogeneity revealed by the box dimension, correlation dimension, and multifractal singular spectrum calculated based on well logs is consistent and in good agreement with the parameters calculated based on core permeability. The heterogeneity of gas layers is comparatively weaker, while that of dry layers is stronger. In addition, the fractal parameters of GR and the acoustic logs of three wells with the oil test in the study area were analyzed, and the relationship between reservoir heterogeneity and production was determined: As reservoir heterogeneity decreases, production increases. Therefore, reservoir heterogeneity can be used as an indicator of production; specifically, reservoirs with weak heterogeneity have high production. Full article

Liver tumors negatively affect vital functions such as digestion and nutrient storage, significantly reducing patients’ quality of life. Therefore, early detection and accurate treatment planning are of great importance. This study aims to support physicians by automatically identifying the type and location of tumors, enabling rapid diagnosis and treatment. The segmentation process was carried out using deep learning methods based on artificial intelligence, particularly the U-Net architecture, which is designed for biomedical imaging. U-Net was modified by adding residual blocks, resulting in a deeper architecture called ResUNet. Due to the limited availability of medical data, both normal data fusion and discrete wavelet transform (DWT) methods were applied during the data preprocessing phase. A total of 131 liver tumor images, resized to 120 × 120 pixels, were analyzed. The DWT-based fusion method achieved more successful results, with a dice coefficient of 94.45%. This study demonstrates the effectiveness of artificial intelligence-supported approaches in liver tumor segmentation and suggests that such applications will become more widely used in the medical field in the future. Full article

The traditional detection method of transformer oil acid value has limitations, such as long detection period and toxicity of reagents; while, with the traditional spectral analysis, it is difficult to realize the efficient extraction of key features related to the acid value content. Early detection of rising acid levels is critical to prevent transformer insulation degradation, corrosion, and failure. Conversely, delayed detection accelerates aging and can cause costly repairs or unplanned outages. To address this need, this paper proposes a new method for predicting the acid value content of the transformer oil based on the infrared spectra in the transformer oil and a deep neural network (DNN). The infrared spectral data of the transformer oil is acquired by ALPHA II FT-IR spectrometer, the high frequency noise effect of the spectrum is reduced by wavelet packet decomposition (WPD), and the bootstrapping soft shrinkage (BOSS) algorithm is used to extract the spectra with the highest correlation with the acid value content. The BOSS algorithm is used to extract the feature parameters with the highest correlation with the acid value content in the spectrum, and the DNN prediction model is established to realize the fast prediction of the acid value content of the transformer oil. In comparison with the traditional infrared spectral preprocessing method and regression model, the proposed prediction model has a coefficient of determination (R²) of 97.12% and 95.99% for the prediction set and validation set, respectively, which is 4.96% higher than that of the traditional model. In addition, the accuracy is 5.45% higher than the traditional model, and the R² of the proposed prediction model is 95.04% after complete external data validation, indicating that it has good accuracy. The results show that the infrared spectral analysis method combining WPD noise reduction, BOSS feature extraction, and DNN modeling can realize the rapid prediction of the acid value content of the transformer oil based on infrared spectroscopy technology, and the prediction model can be used to realize the analytical study of transformer oils. The model can be further applied to the monitoring field of the transformer oil characteristic parameter to realize the rapid monitoring of the transformer oil parameters based on a portable infrared spectrometer. Full article

Wind power generation provides clean and renewable electricity for microgrids, but its intermittency and uncertainty pose challenges to the operation and power quality of microgrids. Accurate forecasting is conducive to maintaining the stability of microgrids and improving the efficiency of energy management. Therefore, this study proposes a dual-branch frequency transformer (DBFformer), which leverages multi-scale spectral transformation and the multi-head attention mechanism to improve the prediction accuracy of microgrid wind turbines. In the encoder, two parallel branches are designed to extract the global features and local dynamic features of meteorological data based on Fourier transform and wavelet transform, respectively. In the decoder, an exponential smoothing attention (ESA) mechanism and a frequency attention (FA) mechanism are introduced to extract multi-scale temporal features. ESA enhances the model’s ability to capture long-term growth trends, whereas FA focuses on periodic pattern recognition. Additionally, to further optimize the model’s performance, a periodic weight coefficient (PWC) mechanism is employed to dynamically adjust the fusion coefficients to further improve the fusion performance and prediction accuracy. The factors influencing wind turbine power are analyzed; then, the most relevant factors are selected for the experiment. According to the experimental results, the proposed DBFformer accurately predicts the output power of wind turbines and exhibits superior performance. It achieves lower mean squared error (MSE) and mean absolute error (MAE) values than other state-of-the-art models. Specifically, its MSE values are 0.195, 0.216, 0.457, and 0.583, and the corresponding MAE values are 0.318, 0.335, 0.474, and 0.503 for different rated wind turbines. Furthermore, comprehensive ablation experiments validate that the dual-branch structure, frequency transformations, dual-attention mechanisms, and PWC module have a positive impact on the proposed model. Therefore, this research offers a novel and effective approach for wind power forecasting and supports the broader goal of integrating clean energy into microgrids. Full article

This work introduces a novel approach to extract beam bridge mode shapes using the residual response between consecutive contact points of vehicles passing through a bridge. A comprehensive investigation is conducted on several critical parameters, including window size, vehicle velocity, road roughness, and beam damping property, as well as the influence of traffic flow. To enhance the mode shape extraction performance using the approximate expression of the contact points’ displacements under noisy disturbance, two new signal denoising methods, CEEMDAN-NSPCA and CEEMDAN-IWT, are proposed based on complete ensemble empirical mode decomposition (CEEMDAN). CEEMDAN-NSPCA integrates CEEMDAN with principal component analysis and a coefficient-based filtering strategy. While CEEMDAN-IWT utilizes an improved wavelet thresholding technique with adaptive threshold selection. The numerical simulations demonstrate that both methods could effectively attenuate high-frequency noise with small amplitudes and retain low-frequency components. Among them, CEEMDAN-IWT exhibits superior denoising performance and greater stability, making it particularly suitable for robust modal identification in noisy environments. Full article

Hypoxia in river estuaries poses significant ecological and water safety risks, yet long-term high-frequency monitoring data for comprehensive analysis remain scarce. This study investigates hypoxia dynamics in the Shenzhen River Estuary (southern China) using two-year high-frequency monitoring data. A hybrid anomaly detection method integrating wavelet analysis and temporal information entropy was developed to identify hypoxia events. The drivers of hypoxia were also identified with correlation coefficients and transfer entropy (TE). The results reveal frequent spring–summer hypoxia. Turbidity and total nitrogen (TN) exhibited significant negative correlations and time-lagged effects on dissolved oxygen (DO), where TE reaches a peak of 0.05 with lags of 36 and 72 h, respectively. Wastewater treatment plant (WWTP) loads, particularly suspended solids (SSs), showed a linear negative correlation with estuarine DO. Notably, the 2022 data showed minimal correlations (except SSs) due to high baseline pollution, whereas the post-remediation 2023 data revealed stronger linear linkages (especially r = −0.81 for SSs). The proposed “high-frequency localization–low-frequency assessment” detection method demonstrated robust accuracy in identifying hypoxia events, and mechanistic analysis corroborated the time-lagged pollutant impacts. These findings advance hypoxia identification frameworks and highlight the critical role of Turbidity and SSs in driving estuarine oxygen depletion, offering actionable insights for adaptive water quality management. Full article