Search Results (82)

Nearshore bathymetry is key to most oceanographic studies and coastal engineering works. This work proposes a new methodology to assess nearshore wave celerity and infer bathymetry from video images. Shoaling and breaking wave patterns were detected on the Timestacks distinctly, and wave celerity was estimated from wave trajectories. The wave type separation enabled the implementation of specific domain formulations for depth inversion: linear for shoaling and non-linear for breaking waves. The technique was validated over a rocky bottom using video acquisition of an online streaming webcam for a period of two days, with significant wave heights varying between 1.7 m and 3.5 m. The results were corroborated in comparison to ground-truth data available up to a depth of 10 m, yielding a mean bias of 0.05 m and a mean root mean square error (RMSE) of 0.43 m. In particular, RMSE was lower than 15% in the outer surf zone, where breaking processes occur. Overall, the depth-normalized RMSE was always lower than 20%, with the major inaccuracy due to some local depressions, which were not resolved. The developed technique can be readily applied to images collected by coastal monitoring stations worldwide and is applicable to drone video acquisitions. Full article

Despite advancements in direct sensing technologies, accurately capturing complex wave–structure interactions remain a significant challenge in ship and ocean engineering. Ensuring the safety and reliability of floating structures requires precise monitoring of dynamic water interactions, particularly in extreme sea conditions. Recent developments in computer vision and artificial intelligence have enabled advanced image-based sensing techniques that complement traditional measurement methods. This study investigates the application of Computerized Video Analysis (CVA) for water surface tracking in maritime experimental tests, marking the first exploration of digitalized experimental video analysis at the Australian Maritime College (AMC). The objective is to integrate CVA into laboratory data acquisition systems, enhancing the accuracy and robustness of wave interaction measurements. A novel algorithm was developed to track water surfaces near floating structures, with its effectiveness assessed through a Wave Energy Converter (WEC) experiment. The method successfully captured wave runup interactions with the hull form, operating alongside traditional sensors to evaluate spectral responses at a wave height of 0.4 m. Moreover, its application in irregular wave conditions demonstrated the algorithm’s capability to reliably detect the waterline across varying wave heights and periods. The findings highlight CVA as a reliable and scalable approach for improving safety assessments in maritime structures. Beyond controlled laboratory environments, this method holds potential for real-world applications in offshore wind turbines, floating platforms, and ship stability monitoring, contributing to enhanced structural reliability under operational and extreme sea states. Full article

Inverse synthetic aperture ladar (ISAL) systems combine laser coherent detection technology with inverse synthetic aperture imaging methods, offering advantages such as compact size, long detection range, and high resolution. The traditional optical delay line technique is widely used in frequency-modulated continuous wave (FMCW) ISAL imaging systems, but its flexibility is limited, posing challenges for high-precision signal processing. Additionally, frequency modulation errors, atmospheric disturbances, and other errors inevitably affect image quality. Therefore, this paper proposes a signal processing method based on digital delay for FMCW ISAL, aiming to achieve the high-resolution imaging of targets across several kilometers. Firstly, the paper introduces the FMCW ISAL system. By introducing digital delay technology, it enables the flexible and real-time adjustment of reference signal delay. Next, to address the frequency offset issue caused by the introduction of digital delay technology, a preprocessing method for unified frequency shift correction is proposed to ensure signal consistency. Then, a set of internal calibration signal datasets is generated based on digital delay technology. Following this, a frequency modulation error iteration estimation method based on gradient descent is introduced. Without the need for target echo signals, the method accurately estimates the frequency modulation phase errors of both the transmitted and reference signals using only the internal calibration signals. Finally, this paper effectively decomposes the motion of the target, derives the echo model for the FMCW ISAL system, and constructs compensation functions to eliminate the intra-pulse Doppler shift and the residual video phase (RVP). Additionally, the Phase Gradient Autofocus (PGA) algorithm is used after two-dimensional imaging to eliminate the impact of atmospheric disturbances. We conducted two sets of experiments on point targets and surface targets to verify the effectiveness of error compensation in improving imaging quality. The results show that the two-dimensional resolution of point targets was optimized to 3 cm (range) × 0.6 cm (azimuth), while the resolution and entropy of the surface targets were both improved by 0.1. These results demonstrate that the proposed method effectively enhances target imaging quality and provides a new technical approach for high-precision signal processing in FMCW ISAL imaging. Full article

While extreme oceanic phenomena can often be accurately predicted, sudden abnormal waves along the shore (surge) are often difficult to foresee; therefore, an immediate sensing system was developed to monitor sudden and extreme events to take necessary actions to prevent further risks and damage. Real-time images from coastal surveillance video and meteorological data were used to construct a warning model for incoming waves using long short-term memory (LSTM) machine learning. This model can predict the wave magnitude that will strike the destination area seconds later and issue an alarm before the surge arrives. The warning model was trained and tested using 110 h of historical data to predict the wave magnitude in the destination area 6 s ahead of its arrival. If the forecasting wave magnitude exceeds the threshold value, a warning will be issued, indicating that a surge will strike in 6 s, alerting personnel to take the necessary actions. This configuration had an accuracy of 60% and 88% recall. The proposed prediction model could issue a surge alarm 5 s ahead with an accuracy of 90% and recall of 80%. For surge caused by a typhoon, this approach could offer 10 s of early waring with recall of 76% and an accuracy of 74%. Full article

Accurate observation of nearshore waves is crucial for coastal safety. In this study, the feasibility of extracting wave information from wave video images captured by shore-based cameras using deep learning methods was explored, focusing on inverting nearshore significant wave height (SWH) from instantaneous wave video images. The accuracy of deep learning models in classifying wind wave and swell wave images was investigated, providing reliable classification results for SWH inversion research. A classification network named ResNet-SW for wave types with improved ResNet was proposed. On this basis, the impact of instantaneous wave images, meteorological factors, and oceanographic factors on SWH inversion was evaluated, and an inversion network named Inversion-Net for SWH that integrates multiple factors was proposed. The inversion performance was significantly enhanced by the specialized models for wind wave and swell. Additionally, the inversion accuracy and stability were further enhanced by improving the loss function of Inversion-Net. Ultimately, time series inversion results were synthesized from the outputs of multiple models; the final inversion results yielded a mean absolute error of 0.04 m and a mean absolute percentage error of 8.52%. Despite certain limitations, this method can still serve as a useful alternative for wave observation. Full article

As media consumption through electronic devices increases, there is growing interest in ASMR videos, known for inducing relaxation and positive emotional states. However, the effectiveness of ASMR varies depending on each video’s characteristics. This study identifies key sound and image features that evoke specific emotional responses. ASMR videos were categorized into two groups: high valence–low relaxation (HVLR) and low valence–high relaxation (LVHR). Subjective evaluations, along with physiological data such as electroencephalography (EEG) and heart rate variability (HRV), were collected from 31 participants to provide objective evidence of emotional and physiological responses. The results showed that both HVLR and LVHR videos can induce relaxation and positive emotions, but the intensity varies depending on the video’s characteristics. LVHR videos have sound frequencies between 50 and 500 Hz, brightness levels of 20 to 30%, and a higher ratio of green to blue. These videos led to 45% greater delta wave activity in the frontal lobe and a tenfold increase in HF HRV, indicating stronger relaxation. HVLR videos feature sound frequencies ranging from 500 to 10,000 Hz, brightness levels of 60 to 70%, and a higher ratio of yellow to green. These videos resulted in 1.2 times higher beta wave activity in the frontal lobe and an increase in LF HRV, indicating greater cognitive engagement and positive arousal. Participants’ subjective reports were consistent with these physiological responses, with LVHR videos evoking feelings of calmness and HVLR videos inducing more vibrant emotions. These findings provide a foundation for creating ASMR content with specific emotional outcomes and offer a framework for researchers to achieve consistent results. By defining sound and image characteristics along with emotional keywords, this study provides practical guidance for content creators and enhances user understanding of ASMR videos. Full article

Thanks to the rapid advancements in Connected and Automated Vehicles (CAVs) and vehicular communication technologies, the concept of the Internet of Vehicles (IoVs) combined with Artificial Intelligence (AI) and big data promotes the vision of an Intelligent Transportation System (ITS). An ITS is critical in enhancing road safety, traffic efficiency, and the overall driving experience by enabling a comprehensive data exchange platform. However, the open and dynamic nature of IoV networks brings significant performance and security challenges to IoV data acquisition, storage, and usage. To comprehensively tackle these challenges, this paper proposes a Decentralized Digital Watermarking framework for smart Vehicular networks (D2WaVe). D2WaVe consists of two core components: FIAE-GAN, a novel feature-integrated and attention-enhanced robust image watermarking model based on a Generative Adversarial Network (GAN), and BloVA, a Blockchain-based Video frames Authentication scheme. By leveraging an encoder–noise–decoder framework, trained FIAE-GAN watermarking models can achieve the invisibility and robustness of watermarks that can be embedded in video frames to verify the authenticity of video data. BloVA ensures the integrity and auditability of IoV data in the storing and sharing stages. Experimental results based on a proof-of-concept prototype implementation validate the feasibility and effectiveness of our D2WaVe scheme for securing and auditing video data exchange in smart vehicular networks. Full article

This study aims to address the problem in tracking technology in which targeted cruising ships or submarines sailing near the water surface are tracked at low frame rates or with some frames missing in the video image, so that the tracked targets have a large gap between frames, leading to a decrease in tracking accuracy and inefficiency. Thus, in this study, we proposed a water surface dynamic multi-target tracking algorithm based on the fusion of YOLOv7 and DeepSORT. The algorithm first introduces the super-resolution reconstruction network. The network can eliminate the interference of clouds and waves in images to improve the quality of tracking target images and clarify the target characteristics in the image. Then, the shuffle attention module is introduced into YOLOv7 to enhance the feature extraction ability of the target features in the recognition network. Finally, Euclidean distance matching is introduced into the cascade matching of the DeepSORT algorithm to replace the distance matching of IOU to improve the target tracking accuracy. Simulation results showed that the algorithm proposed in this study has a good tracking effect, with an improvement of 9.4% in the improved YOLOv7 model relative to the mAP50-95 value and an improvement of 13.1% in the tracking accuracy in the DeepSORT tracking network compared with the SORT tracking accuracy. Full article

New technologies are being used to facilitate the recognition process during and after earthquakes. These advanced tools are essential to keep track of what is left from of the destruction suffered by the built stock. Among the new technologies are video recordings captured during seismic events, footage from drones, and satellite imagery acquired before and after the event. This review paper presents a series of examples collected from the 2023 Türkiye–Syria earthquakes to illustrate how these new technologies offer a unique and efficient way to capture, document, and transfer information among experts in seismology, earthquake engineering, and disaster management. Whenever possible, these examples are accompanied by simple qualitative explanations to enhance understanding. To demonstrate the potential of video cameras and drone imagery for quantitative analysis, in addition to the various simple examples provided, two case studies are provided—one on road blockages, and another on intensity assessment and wave attenuation as observed in video cameras. These technologies are critical and merit considerable focus, particularly video cameras, which have not received much attention recently, on helping to understand seismic wave passage and their impact on the built environment. Enhancing our use of video cameras in this context can significantly contribute to the sustainability and resilience of our society. With the rapid advancement of image analysis, we advocate for a collaborative platform for accessing and utilizing imagery materials, aiding current and future generations in analysing the causes of such tragedies. Full article

This experimental study focused on the measurement and analysis of the impact force caused by a tsunami bore on a coastal structure. The bore wave was produced by a dam break mechanism. The water depth in the reservoir and the location of the coastal structures were varied to simulate different impact scenarios. The time history of the force resulting from the impact of the bore wave on the coastal structure was measured. The propagation of the bore wave along the flume was recorded and the video recordings were converted into digital data using an image-processing technique in order to determine the flow depth variations with time. The hydrostatic forces and the corresponding depth and time-averaged hydrodynamic forces as well as the maximum hydrodynamic forces were acquired for each scenario. The ratio of hydrodynamic to hydrostatic forces were obtained, and it was observed that the calculated averaged ratio was within the recommended design ratio. The results indicate that an increase in the reservoir level caused an increase in the magnitude and intensity of the impact forces, however, the relationship was non-linear. Moreover, it was found that the location of the structure did not play a significant role on the intensity of the impact forces. Full article

The innovative aquaculture equipment known as high-density polyethylene (HDPE) floating rafts has gained popularity among fishermen in the southeast coastal regions of China. Compared to deep-water anti-wave fish cages, the construction costs of HDPE floating rafts are 50% to 75% less. There is a dearth of comprehensive publicly available records of HDPE floating rafts sea trial data, despite substantial numerical studies on the motion response of aquaculture fish cages and scale model experiments under controlled-wave conditions. This study involves sea trial techniques under operational and extreme environmental conditions for motion responses of HDPE floating rafts, presents a comprehensive procedure for sea trials of HDPE floating rafts, summarizes the issues encountered during the trials, and suggests solutions. Using MATLAB for independent programming, motion videos and photos collected from the sea trials are processed for image capture, yielding the original time history curve of vertical displacement. Based on the sea trials’ data, including motion displacement, acceleration, mooring line force, overall deformation patterns, and current and wave data, recommendations are provided for the design and layout of HDPE floating rafts. Based on the Fast Fourier Transform (FFT) method for spectral analysis, the influence of interference items on the observational data is eliminated; the rationality of the observational data is verified in conjunction with the results of the Gabor Transform. This study offers a scientific analytical method for the structural design and safe operation of HDPE floating rafts and provides a reference for subsequent numerical simulations. Full article

This paper investigates the dynamics of the cross-shore extensions of banquettes, a sedimentary structure mostly made by rests of Posidonia oceanica (L.) Delile, in a sandy urban beach located in the Gulf of Cagliari, Italy, western Mediterranean. A video monitoring station was installed above the promontory south of the beach. We analysed a four-year image database and related these dynamics to wave and wind parameters (obtained from the Copernicus and ERA5 databases) from September 2016 to September 2020. Our results showed that banquette deposition occurred in concomitance with the presence of leaf litter in the surf zone associated with mild storm events. Erosion of the banquettes occurred during more intense storms. When leaf litter was not present in the surf zone, banquettes were not deposited even with mild storms. Wind can influence the banquette dynamics: under certain conditions of speed intensity, the banquettes may be removed offshore, supplying litter in the surf zone, or they may be covered by sediment. The permanence of the banquettes on the beaches also depended on their composition: when the banquettes were intertwined with reeds, their removal by the waves did not occur even during intense storms, and this sedimentary structure can protect the beach from flooding. Full article

Human movement recognition is the use of perceptual technology to collect some of the limb or body movements presented. This practice involves the use of wireless signals, processing, and classification to identify some of the regular movements of the human body. It has a wide range of application prospects, including in intelligent pensions, remote health monitoring, and child supervision. Among the traditional human movement recognition methods, the widely used ones are video image-based recognition technology and Wi-Fi-based recognition technology. However, in some dim and imperfect weather environments, it is not easy to maintain a high performance and recognition rate for human movement recognition using video images. There is the problem of a low recognition degree for Wi-Fi recognition of human movement in the case of a complex environment. Most of the previous research on human movement recognition is based on LiDAR perception technology. LiDAR scanning using a three-dimensional static point cloud can only present the point cloud characteristics of static objects; it struggles to reflect all the characteristics of moving objects. In addition, due to its consideration of privacy and security issues, the dynamic millimeter-wave radar point cloud used in the previous study on the existing problems of human body movement recognition performance is better, with the recognition of human movement characteristics in non-line-of-sight situations as well as better protection of people’s privacy. In this paper, we propose a human motion feature recognition system (PNHM) based on spatiotemporal information of the 3D point cloud of millimeter-wave radar, design a neural network based on the network PointNet++ in order to effectively recognize human motion features, and study four human motions based on the threshold method. The data set of the four movements of the human body at two angles in two experimental environments was constructed. This paper compares four standard mainstream 3D point cloud human action recognition models for the system. The experimental results show that the recognition accuracy of the human body’s when walking upright can reach 94%, the recognition accuracy when moving from squatting to standing can reach 84%, that when moving from standing to sitting can reach 87%, and the recognition accuracy of falling can reach 93%. Full article

In this paper, we propose a noise-robust pulse wave estimation method from near-infrared face video images. Pulse wave estimation in a near-infrared environment is expected to be applied to non-contact monitoring in dark areas. The conventional method cannot consider noise when performing estimation. As a result, the accuracy of pulse wave estimation in noisy environments is not very high. This may adversely affect the accuracy of heart rate data and other data obtained from pulse wave signals. Therefore, the objective of this study is to perform pulse wave estimation robust to noise. The Wiener estimation method, which is a simple linear computation that can consider noise, was used in this study. Experimental results showed that the combination of the proposed method and signal processing (detrending and bandpass filtering) increased the SNR (signal to noise ratio) by more than 2.5 dB compared to the conventional method and signal processing. The correlation coefficient between the pulse wave signal measured using a pulse wave meter and the estimated pulse wave signal was 0.30 larger on average for the proposed method. Furthermore, the AER (absolute error rate) between the heart rate measured with the pulse wave meter was 0.82% on average for the proposed method, which was lower than the value of the conventional method (12.53% on average). These results show that the proposed method is more robust to noise than the conventional method for pulse wave estimation. Full article

China’s sea surface area is vast, the need to monitor the area is too large, and the traditional human monitoring method consumes a lot of manpower. Additionally, the monitoring period is too long; the monitoring efficiency is too low; and long-term human monitoring can easily cause visual fatigue, as well as missed detection and error detection. At present, the detection of sea surface targets generally includes infrared, visible light and other different means, which can obtain the image information of sea surface targets in different ways. The infrared target detection of the sea surface can be processed in the spatial domain and frequency domain, respectively, but the image resolution is not high in general, and the detection effect is not good because it is easily affected by weather. In this paper, we propose a maritime target detection method based on embedded vision. Based on visible video images, this paper realizes the rapid detection and recognition of sea surface targets. Clouds and waves in ocean images are filtered by adding an image preprocessing module. Compared with the traditional two-frame difference method, this algorithm has better detection capability for sea surface targets. Experiments were carried out in different weather conditions to detect moving ships at sea. By comparing the number of detection boxes and the detection accuracy, the accuracy of this method reaches 90.2 percent. By designing a single camera location algorithm for the marine environment, the world coordinate location of the marine target is realized. On this basis, the communication function is added to realize the intelligent monitoring of the sea surface without human intervention. Full article