Search Results (87)

Hurricanes are major drivers of forest structure in the Caribbean. In 2017, Hurricane Maria caused substantial damage to Puerto Rico’s forests. We studied forest structure variation across 75 sites at Las Casas de la Selva, a sustainable forest plantation in Patillas, Puerto Rico, seven years after Hurricane Maria hit the property. At each site we analyzed 360° photos in a 3D VR headset to quantify the vertical structure and transformed them into hemispherical images to quantify canopy closure and ground cover. We also computed the Vertical Habitat Diversity Index (VHDI) from the amount of foliage in four strata: herbaceous, shrub, understory, and canopy. Using the Local Bivariate Relationship tool in ArcGIS Pro, we analyzed the relationship between forest recovery (vertical structure, canopy closure, and ground cover) and damage. Likewise, we analyzed the effects of elevation, slope, and aspect, on damage, canopy closure, and vertical forest structure. We found that canopy closure decreases with increasing elevation and increases with the amount of damage. Higher elevations show a greater amount of damage even seven years post hurricane. We conclude that trees in the mixed tabonuco/plantation forest are more susceptible to hurricanes at higher elevations. The results have implications for plantation forest management under climate-change-driven higher intensity hurricane regimes. Full article

Urban green spaces (UGSs) are vital in enhancing environmental quality, social well-being, and climate resilience, yet their distribution and accessibility remain uneven in many rapidly urbanizing cities. The 3–30–300 rule offers a structured guideline with which to assess urban greenness, emphasizing tree visibility, canopy cover, and green space proximity. However, its applicability in dense and resource-constrained urban environments has not been sufficiently examined. This study evaluates the feasibility of the 3–30–300 rule in Nagpur, India, using survey-based visibility assessments, NDVI-derived vegetation cover analysis, and QGIS-based accessibility evaluation. The study also introduces the Urban Greenness Exposure Index (UGEI), a composite metric that refines greenness assessment by capturing intra-zone variations beyond broad classifications. The findings reveal significant variations in urban greenness exposure across Nagpur’s ten municipal zones. Low-greenness zones report the highest tree visibility deprivation (below two trees), limited canopy cover (~7%), and restricted green space access (over 80% of residents lacking access within 300 m). The correlation analysis shows that higher canopy cover does not necessarily correspond to better visibility or accessibility, highlighting the need for integrated planning strategies. The study concludes that applying the 3–30–300 rule in high-density Indian cities requires localized adaptations, such as incentivizing street tree planting, integrating vertical greenery, and repurposing vacant lots for public parks. The UGEI framework offers a practical tool for identifying priority zones and guiding equitable greening interventions, based on insights drawn from the Nagpur case study. Full article

Accurate wildfire spread modeling critically depends on the representation of wind dynamics, which vary with terrain, land cover characteristics, and height above ground. Many fire spread models are often coupled with coarse atmospheric grids that cannot explicitly resolve the vertical variation of wind near flame heights. Rothermel’s fire spread model, a widely used parameterization, relies on midflame wind speed to calculate the fire rate of spread. In coupled fire atmosphere models such as the Community Fire Behavior Model (CFBM), users are required to specify the midflame height before running a fire spread simulation. This study evaluates the use of logarithmic interpolation wind adjustment factors (WAF) for improving midflame wind speed estimates, which are critical for the Rothermel model. We compare the fixed wind height approach that is currently used in CFBM with WAF-derived winds for unsheltered and sheltered surface fire spread. For the first time in this context, these simulations are validated against satellite and ground-based observations of fire perimeters. The results show that WAF implementation improves fire perimeter predictions for both grass and canopy fires while reducing the overestimation of fire spread. Moreover, this approach solely depends on the fuel bed depth and estimation of canopy density, enhancing operational efficiency by eliminating the need for users to specify a wind height for simulations. Full article

The continuous assessment of cover crop growth throughout the season is a crucial baseline observation for making informed crop management decisions and sustainable farming operation. Precision agriculture techniques involving applications of sensors and unmanned aerial vehicles provide precise and prompt spectral and structural data, which allows for effective evaluation of cover crop biomass. Vegetation indices are widely used to quantify crop growth and biomass metrics. The objective of this study was to evaluate the accuracy of biomass estimation using a machine learning approach leveraging spectral and canopy height data acquired from unmanned aerial vehicles (UAVs), comparing different neural network architectures, optimizers, and activation functions. Field trials were carried out at two sites in Louisiana involving winter cover crops. The canopy height was estimated by subtracting the digital surface model taken at the time of peak growth of the cover crop from the data captured during a bare ground condition. When evaluated against the validation dataset, the neural network model facilitated with a Keras TensorFlow library with Adam optimizers and a sigmoid activation function performed the best, predicting cover crop biomass with an average of 96 g m⁻² root mean squared error (RMSE). Other statistical metrics including the Pearson correlation and R² also showed satisfactory conditions with this combination of hyperparameters. The observed cover crop biomass ranged from 290 to 1217 g m⁻². The present study findings highlight the merit of comprehensive analysis of cover crop traits using UAV remote sensing and machine learning involving realistic underpinning biophysical mechanisms, as our approach captured both horizontal (vegetation indices) and vertical (canopy height) aspects of plant growth. Full article

Accurate Digital Elevation Models (DEMs) are essential for precise terrain gravity field calculations, which are critical in gravity field modeling, airborne gravimeter and gradiometer calibration, and geophysical inversion. This study evaluates the accuracy of various satellite DEMs by comparing them with a LiDAR DEM at the Wudalianchi test site, a location requiring ultra-accurate terrain gravity fields. Major DEM error sources, particularly those related to vegetation, were identified and corrected using a least squares method that integrates canopy height, vegetation cover, NDVI, and airborne LiDAR DEM data. The impact of DEM vegetation errors on terrain gravity anomalies and gravity gradients was quantified using a partitioned adaptive gravity forward-modeling method at different measurement heights. The results indicate that the TanDEM-X DEM and AW3D30 DEM exhibit the highest vertical accuracy among the satellite DEMs evaluated in the Wudalianchi area. Vegetation significantly affects DEM accuracy, with vegetation-related errors causing an impact of approximately 0.17 mGal (RMS) on surface gravity anomalies. This effect is more pronounced in densely vegetated and volcanic regions. At 100 m above the surface and at an altitude of 1 km, vegetation height affects gravity anomalies by approximately 0.12 mGal and 0.07 mGal, respectively. Additionally, vegetation height impacts the vertical gravity gradient at 100 m above the surface by approximately 4.20 E (RMS), with errors up to 48.84 E over vegetation covered areas. The findings underscore the critical importance of using DEMs with vegetation errors removed for high-precision terrain gravity and gravity gradient modeling, particularly in applications such as airborne gravimeter and gradiometer calibration. Full article

The Real-Time Kinematic (RTK) method is currently the most widely used method for positioning using Global Navigation Satellite Systems (GNSSs) due to its accuracy, efficiency and ease of use. In forestry, position is a critical factor for numerous applications, with GNSS currently being the preferred solution for obtaining such data. However, the decreased performance of GNSS observations in challenging environments, such as under the forest canopy, must be considered. This paper analyzes the performance of a survey-grade GNSS receiver under coniferous/deciduous tree cover. Unlike most previous research concerning this topic, the focus here is on employing a methodology that is as close as possible to real working conditions in the field of forestry. To achieve this, short observation times of 30 s were used, with corrections received directly in the field from a Continuously Operating Reference Station (CORS) of the national RTK network in Romania. In total, 84 test points were determined, randomly distributed under the canopy, with reference data collected by topographical surveys using total station equipment. In terms of the overall horizontal accuracy, an RMSE of 2.03 m and MAE of 1.63 m are found. Meanwhile, the overall vertical accuracy is lower, as expected, with an RMSE of 4.85 m and MAE of 4.01 m. The variation in GNSS performance under the different forest compositions was found to be statistically significant, while GNSS-specific factors such as DOP values only influenced the precision and not the accuracy of observations. We established that this methodology offers sufficient accuracy, which is application-dependent, even if the majority of GNSS solutions were code-based, rather than carrier-phase-based, due to strong interference from the vegetation. Full article

Optical remote sensing can effectively capture 2-dimensional (2D) forest information, such as woodland area and percentage forest cover. However, accurately estimating forest vertical-structure relevant parameters such as height using optical images remains challenging, which leads to low accuracy of estimating forest stocks like biomass and carbon stocks. Thus, accurately obtaining vertical structure information of forests has become a significant bottleneck in the application of optical remote sensing to forestry. Microwave remote sensing such as synthetic aperture radar (SAR) and polarimetric SAR provides the capability to penetrate forest canopies with the L-band signal, and is particularly adept at capturing the vertical structure information of forests, which is an alternative ideal remote-sensing data source to overcome the aforementioned limitation. This paper utilizes the Citexs data analysis platform, along with the CNKI and PubMed databases, to investigate the advancements of applying L-band SAR technology to forest canopy penetration and structure-parameter estimation, and provides a comprehensive review based on 58 relevant articles from 1978 to 2024 in the PubMed database. The metrics, including annual publication numbers, countries/regions from which the publications come, institutions, and first authors, with the visualization of results, were utilized to identify development trends. The paper summarizes the state of the art and effectiveness of L-band SAR in addressing the estimation of forest height, moisture, and forest stocks, and also examines the penetration depth of the L-band in forests and highlights key influencing factors. This review identifies existing limitations and suggests research directions in the future and the potential of using L-band SAR technology for forest parameter estimation. Full article

The leaf area index (LAI) is a critical variable for forest ecosystem processes. Passive optical and active LiDAR remote sensing have been used to retrieve LAI. LiDAR data have good penetration to provide vertical structure distribution and deliver the ability to estimate forest LAI, such as the Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2). Segment size and beam type are important for ICESat-2 LAI estimation, as they affect the amount of signal photons returned. However, the current ICESat-2 LAI estimation only covered a limited number of sites, and the performance of LAI estimation with different segment sizes has not been clearly compared. Moreover, ICESat-2 LAIs derived from strong and weak beams lack a comparative analysis. This study derived and evaluated LAI from ICESat-2 data over the National Ecological Observatory Network (NEON) sites in North America. The LAI estimated from ICESat-2 for different segment sizes (20, 100, and 200 m) and beam types (strong beam and weak beam) were compared with those from the airborne laser scanning (ALS) and the Copernicus Global Land Service (CGLS). The results show that the LAI derived from strong beams performs better than that of weak beams because more photon signals are received. The LAI estimated from the strong beam at the 200 m segment size shows the highest consistency with those from the ALS data (R = 0.67). Weak beams also present the potential to estimate LAI and have moderate agreement with ALS (R = 0.52). The ICESat-2 LAI shows moderate consistency with ALS for most forest types, except for the evergreen forest. The ICESat-2 LAI shows satisfactory agreement with the CGLS 300 m LAI product (R = 0.67, RMSE = 1.94) and presents a higher upper boundary. Overall, the ICESat-2 can characterize canopy structural parameters and provides the ability to estimate LAI, which may promote the LAI product generated from the photon-counting LiDAR. Full article

The vertical structure of forests, including the measurement of canopy height, helps researchers understand forest characteristics such as density and growth stages. It is one of the key variables for estimating forest biomass and is crucial for accurately monitoring changes in forest carbon storage. However, current technologies face challenges in achieving cost-effective, accurate measurement of canopy height on a widespread scale. This study introduces a method aimed at extracting accurate forest canopy height from The Global Ecosystem Dynamics Investigation (GEDI) data, followed by a comprehensive large-scale analysis utilizing this approach. Before mapping, verifying and analyzing the accuracy and sensitivity of parameters that may affect the precision of GEDI data extraction, such as slope, aspect, and vegetation coverage, can aid in assessment and decision-making, enhancing inversion accuracy. Consequently, a random forest method based on parameter sensitivity analysis is developed to break through the constraints of traditional issues and achieve forest canopy height inversion. Sensitivity analysis of influencing parameters surpasses the uniform parameter calculation of traditional methods by differentiating the effects of various land use types, thereby enhancing the precision of height inversion. Moreover, potential factors affecting the accuracy of GEDI data, such as vegetation cover density, terrain complexity, and data acquisition conditions, are thoroughly analyzed and discussed. Subsequently, large-scale forest canopy height estimation is conducted by integrating vegetation cover Normalized Difference Vegetation Index (NDVI), sun altitude angle and terrain data, among other variables, and accuracy validation is performed using airborne LiDAR data. With an R² value of 0.64 and an RMSE of 8.62, the mapping accuracy underscores the resilience of the proposed method in delineating forest canopy height within the Changbai Mountain forest domain. Full article

Gaps are openings within tropical forest canopies created by natural or anthropogenic disturbances. Important aspects of gap dynamics that are not well understood include how gaps close over time and their potential for contagiousness, indicating whether the presence of gaps may or may not induce the creation of new gaps. This is especially important when we consider disturbances from selective logging activities in rainforests, which take away large trees of high commercial value and leave behind a forest full of gaps. The goal of this study was to quantify and understand how gaps open and close over time within tropical rainforests using a time series of airborne LiDAR data, attributing observed processes to gap types and origins. For this purpose, the Jamari National Forest located in the Brazilian Amazon was chosen as the study area because of the unique availability of multi-temporal small-footprint airborne LiDAR data covering the time period of 2011–2017 with five data acquisitions, alongside the geolocation of trees that were felled by selective logging activities. We found an increased likelihood of natural new gaps opening closer to pre-existing gaps associated with felled tree locations (<20 m distance) rather than farther away from them, suggesting that small-scale disturbances caused by logging, even at a low intensity, may cause a legacy effect of increased mortality over six years after logging due to gap contagiousness. Moreover, gaps were closed at similar annual rates by vertical and lateral ingrowth (16.7% yr⁻¹) and about 90% of the original gap area was closed at six years post-disturbance. Therefore, the relative contribution of lateral and vertical growth for gap closure was similar when consolidated over time. We highlight that aboveground biomass or carbon density of logged forests can be overestimated if considering only top of the canopy height metrics due to fast lateral ingrowth of neighboring trees, especially in the first two years of regeneration where 26% of gaps were closed solely by lateral ingrowth, which would not translate to 26% of regeneration of forest biomass. Trees inside gaps grew 2.2 times faster (1.5 m yr⁻¹) than trees at the surrounding non-gap canopy (0.7 m yr⁻¹). Our study brings new insights into the processes of both the opening and closure of forest gaps within tropical forests and the importance of considering gap types and origins in this analysis. Moreover, it demonstrates the capability of airborne LiDAR multi-temporal data in effectively characterizing the impacts of forest degradation and subsequent recovery. Full article

Full-waveform LiDAR (FWF) offers a promising advantage over other technologies to represent the vertical canopy structure of secondary successions in the Amazon region, as the waveform encapsulates the properties of all elements intercepting the emitted beam. In this study, we investigated modifications in the vertical structure of the Amazonian secondary successions across the vegetation gradient from early to advanced stages of vegetation regrowth. The analysis was performed over two distinct climatic regions (Drier and Wetter), designated using the Maximum Cumulative Water Deficit (MCWD). The study area was covered by 309 sample plots distributed along 25 LiDAR transects. The plots were grouped into three successional stages (early—SS1; intermediate—SS2; advanced—SS3). Mature Forest (MF) was used as a reference of comparison. A total of 14 FWF LiDAR metrics from four categories of analysis (Height, Peaks, Understory and Gaussian Decomposition) were extracted using the Waveform LiDAR for Forestry eXtraction (WoLFeX) software (v1.1.1). In addition to examining the variation in these metrics across different successional stages, we calculated their Relative Recovery (RR) with vegetation regrowth, and evaluated their ability to discriminate successional stages using Random Forest (RF). The results showed significant differences in FWF metrics across the successional stages, and within and between sample plots and regions. The Drier region generally exhibited more pronounced differences between successional stages and lower FWF metric values compared to the Wetter region, mainly in the category of height, peaks, and Gaussian decomposition. Furthermore, the Drier region displayed a lower relative recovery of metrics in the early years of succession, compared to the areas of MF, eventually reaching rates akin to those of the Wetter region as succession progressed. Canopy height metrics such as Waveform distance (WD), and Gaussian Decomposition metrics such as Bottom of canopy (BC), Bottom of canopy distance (BCD) and Canopy distance (CD), related to the height of the lower forest stratum, were the most important attributes in discriminating successional stages in both analyzed regions. However, the Drier region exhibited superior discrimination between successional stages, achieving a weighted F1-score of 0.80 compared to 0.73 in the Wetter region. When comparing the metrics from SS in different stages to MF, our findings underscore that secondary forests achieve substantial relative recovery of FWF metrics within the initial 10 years after land abandonment. Regions with potentially slower relative recovery (e.g., Drier regions) may require longer-term planning to ensure success in providing full potential ecosystem services in the Amazon. Full article

Fire regimes have shaped extant vegetation communities, and subsequently fuel arrays, in fire-prone landscapes. Understanding how resilient fuel arrays are to fire regime attributes will be key for future fire management actions, given global fire regime shifts. We use a network of 63-field sites across the Sydney Basin Bioregion (Australia) to quantify how fire interval (short: last three fires <10 years apart, long: last two fires >10 years apart) and severity (low: understorey canopy scorched, high: understorey and overstorey canopy scorched), impacted fuel attribute values 2.5 years after Australia’s 2019–2020 Black Summer fires. Tree bark fuel hazard, herbaceous (near-surface fuels; grasses, sedges <50 cm height) fuel hazard, and ground litter (surface fuels) fuel cover and load were higher in areas burned by low- rather than high-severity fire. Conversely, midstorey (elevated fuels: shrubs, trees 50 cm–200 m in height) fuel cover and hazard were higher in areas burned by high- rather than low-severity fire. Elevated fuel cover, vertical connectivity, height and fuel hazard were also higher at long rather than short fire intervals. Our results provide strong evidence that fire regimes rearrange fuel arrays in the years following fire, which suggests that future fire regime shifts may alter fuel states, with important implications for fuel and fire management. Full article

Loss of forest cover and derived effects on forest ecosystems services has led to the establishment of land management policies and forest monitoring systems, and consequently to the demand for accurate and multitemporal data on forest extent and structure. In recent years, spaceborne Light Detection and Ranging (LiDAR) missions, such as the Global Ecosystem Dynamics Investigation (GEDI) instrument, have facilitated the repeated acquisition of data on the vertical structure of vegetation. In this study, we designed an approach incorporating GEDI and airborne LiDAR data, in addition to detailed forestry inventory data, for estimating tree-growth dynamics for the Laurentides wildlife reserve in Canada. We estimated an average tree-growth rate of 0.32 ± 0.23 (SD) m/year for the study site and evaluated our results against field data and a time series of NDVI from Landsat images. The results are in agreement with expected patterns in tree-growth rates related to tree species and forest stand age, and the produced dataset is able to track disturbance events resulting in the loss of canopy height. Our study demonstrates the benefits of using spaceborne-LiDAR data for extending the temporal coverage of forestry inventories and highlights the ability of GEDI data for detecting changes in forests’ vertical structure. Full article

Wildfires cause profound challenges for animals to overcome due to their reliance on vegetation. This study addresses the impact of three levels of forest burn severity (unburned, low, and high burn severity) on the foraging behavior of small mammals in the Pinaleño Mountains (AZ, USA) using the giving up density (GUD) experiment approach. Overall, burn severity affected the foraging behavior of small mammals that spent less time foraging in high burn severity patches. Vegetation characteristics influenced GUD differently based on the level of burn severity. Higher canopy cover was perceived as areas with a higher predation risk (higher GUD) in unburned and low burn severity patches, while cover provided by logs and shrubs decreased the GUD (increased foraging). This suggests a complicated interaction between horizontal (logs, grass, shrub cover) and vertical vegetation cover in relation to burn severity. Fires affected the foraging behavior of the small mammals but did not impact all species in the same way. Generalists, such as Peromyscus sp. and Tamias dorsalis, seemed to forage across all burn severities, while specialist species, such as tree squirrels, tended to avoid the high burn severity patches. Clarifying the complex impacts of fires on small mammals’ foraging behaviors contributes to our understanding of the intricate interactions, at micro-habitat levels, between vegetation structure and the behavioral responses of animals and it can help managers to plan actions to reduce the negative impacts of wildfires. Full article

Wildfires burn millions of hectares of forest worldwide every year, and this trend is expected to continue growing under current and future climate scenarios. As a result, accurate knowledge of fuel conditions and fuel type mapping are important for assessing fire hazards and predicting fire behavior. In this study, 499 plots in six different areas in Portugal were surveyed by ALS and multisource RS, and the data thus obtained were used to evaluate a nationwide fuel classification. Random Forest (RF) and CART models were used to evaluate fuel models based on ALS (5 and 10 pulse/m²), Sentinel Imagery (Multispectral Sentinel 2 (S2) and SAR (Synthetic Aperture RaDaR) data (C-band (Sentinel 1 (S1)) and Phased Array L-band data (PALSAR-2/ALOS-2 Satellite) metrics. The specific goals of the study were as follows: (1) to develop simple CART and RF models to classify the four main fuel types in Portugal in terms of horizontal and vertical structure based on field-acquired ALS data; (2) to analyze the effect of canopy cover on fuel type classification; (3) to investigate the use of different ALS pulse densities to classify the fuel types; (4) to map a more complex classification of fuel using a multi-sensor approach and the RF method. The results indicate that use of ALS metrics (only) was a powerful way of accurately classifying the main four fuel types, with OA = 0.68. In terms of canopy cover, the best results were estimated in sparse forest, with an OA = 0.84. The effect of ALS pulse density on fuel classification indicates that 10 points m⁻² data yielded better results than 5 points m⁻² data, with OA = 0.78 and 0.71, respectively. Finally, the multi-sensor approach with RF successfully classified 13 fuel models in Portugal, with moderate OA = 0.44. Fuel mapping studies could be improved by generating more homogenous fuel models (in terms of structure and composition), increasing the number of sample plots and also by increasing the representativeness of each fuel model. Full article