Search Results (8,311)

Reverse engineering (RE) has been increasingly adopted in metal manufacturing to digitize legacy parts, connect “as-is” geometry to mechanical performance, and enable agile repair and remanufacturing. This review consolidates scan-to-simulation workflows that transform 3D measurement data (optical/laser scanning and X-ray computed tomography) into simulation-ready models for structural assessment and manufacturing decisions, with an explicit focus on sustainability. Key steps are reviewed, from acquisition planning and metrological error sources to point-cloud/mesh processing, CAD/feature reconstruction, and geometry preparation for finite-element analysis (watertightness, defeaturing, meshing strategies, and boundary condition transfer). Special attention is given to uncertainty quantification and the propagation of geometric deviations into stress, stiffness, and fatigue predictions, enabling robust accept/reject and repair/replace choices. Sustainability is addressed through a lightweight reporting framework covering material losses, energy use, rework, and lead time across the scan–model–simulate–manufacture chain, clarifying when digitalization reduces scrap and over-processing. Industrial use cases are discussed for high-value metal components (e.g., molds, turbine blades, and marine/energy parts) where scan-informed simulation supports faster and more reliable decision making. Open challenges are summarized, including benchmark datasets, standardized reporting, automation of feature recognition, and integration with repair process simulation (DED/WAAM) and life-cycle metrics. A checklist is proposed to improve reproducibility and comparability across RE studies. Full article

Aerosol microphysical and optical properties play a crucial role in cloud microphysics, precipitation physics, and flood formation over areas characterized by complex monsoon regimes. This research presents a multi-source data integration approach to analyzing the spatio-temporal interaction between precipitation, aerosols, and flooding in the state of Kerala, incorporating an air mass trajectory analysis to examine its potential contribution to flooding. The results show that the Aerosol Optical Depth (AOD) values were high in the coastal districts (>0.8) in the La Niña year (2021) but low in the El Niño year (2015). On the precipitation side, 2018 and 2021 were both years with a high degree of anomalies, resulting in heavy rainfall that led to widespread flooding in the Thrissur district, among others. The trajectory analysis revealed that the Indian Ocean controls the precipitation during the southwest monsoon and the pre-monsoon. The post-monsoon precipitation is mainly sourced from the Arabian Peninsula and Arabian Sea, transferring marine aerosols along with desert aerosols. The overall study shows that the variability in aerosols and precipitation is more subject to change by the meteorological dynamics, as well as influenced by the regional changes in land use and land cover, causing fluxes in the land–atmosphere interactions. In conclusion, the present study highlights the possible interactive functions of atmospheric dynamics and anthropogenic land use modifications in generating a flood hazard. It provides essential information for land management policies and disaster risk reduction. Full article

Mangrove forests provide essential climate regulation and coastal protection, yet fine-scale quantification of carbon dynamics remains limited in the Sundarbans due to spatial heterogeneity and tidal influences. This study estimated canopy structural and photosynthetic dynamics from 2019 to 2023 by integrating 10 m spatial high-resolution remote sensing with a light use efficiency (LUE) modeling framework. Leaf Area Index (LAI) was retrieved at 10 m resolution using the PROSAIL radiative transfer model applied to Sentinel-2 data to characterize the canopy structure of the mangrove forest. LUE-based Gross Primary Productivity (GPP) was estimated using Sentinel-2 vegetation and water indices and MODIS fPAR with station observatory temperature data. Annual carbon uptake showed clear interannual variation, ranging from 1881 to 2862 g C m⁻² yr⁻¹ between 2019 and 2023. GPP estimates were strongly correlated with MODIS-GPP (R² = 0.86, p < 0.001), demonstrating the method’s reliability for monitoring mangrove carbon sequestration. LUE-based Solar-induced Chlorophyll Fluorescence (SIF) was derived at 10 m resolution and compared with TROPOMI-SIF observations to assess correspondence (R² = 0.88, p < 0.001) with photosynthetic activity. LAI, GPP and SIF exhibited pronounced seasonal and interannual variability on photosynthetic activity, with higher values during the monsoon growing season and lower values during dry periods. Mean NDVI declined from 2019 to 2023 and modeled annual carbon uptake ranged from approximately 43 to 65 Mt CO₂ eq, with lower sequestration in 2022–2023 associated with climatic stress. Strong correlations among LAI, NDVI, GPP, and SIF indicated consistent coupling between photosynthetic activity and carbon uptake in the mangrove ecosystem. These results provide a fine-scale assessment of mangrove carbon dynamics relevant to conservation and climate-mitigation planning in tropical regions. Full article

Chinese local governments have long financed public services through land-sale revenues. The shift from selling undeveloped land to redeveloping existing urban areas has disrupted this traditional financing model, exposing a critical tension between the pursuit of immediate revenue and the assurance of long-term fiscal health. The continued dependence on land-based finance has led many local governments to overlook long-term public service obligations and the long-term operating deficits associated with intensive urban development. Thus, by examining the relationship between the development rights allocation and the sustainable fiscal capacity of the government, the study evaluates both short-term revenue generation and long-term expenditure commitments in urban redevelopment contexts. However, existing research has yet to provide actionable tools to reconcile this structural mismatch between short-term revenues and long-term liabilities. We employ a comprehensive analytical framework that integrates fiscal impact modeling with the optimization of development rights allocation. Based on this framework, we construct a quantitative, dual-period fiscal balance model using mathematical programming to analyze various combinations of land development rights supply strategies for achieving fiscal equilibrium. Our results identify multiple feasible supply combinations that can maintain fiscal balance while supporting sustainable urban development. The findings demonstrate that strategic development rights allocation functions as an effective tool for balancing short-term revenue needs with long-term obligations in local land finance systems. Our study contributes to establishing a sustainable land finance framework, particularly for jurisdictions lacking comprehensive land value capture mechanisms. The proposed approach offers an alternative to traditional land rights transfer models and provides guidance for avoiding long-term fiscal distress caused by excessive land transfer. The framework supports more sustainable urban redevelopment financing while maintaining fiscal responsibility across temporal horizons. Full article

(1) Background: Urban traffic micro-environments show strong spatial and temporal variability. Short and intensive campaigns remain a practical approach for understanding exposure patterns in complex environments, but they need clear and interpretable summaries that are not limited to simple site or time segmentation. (2) Methods: We carried out a multi-site campaign across five traffic-affected micro-environments, where measurements covered several pollutants, gases, and meteorological variables. A machine learning framework was introduced to learn interpretable operational regimes as recurring multivariate states using clustering with stability checks, and then we evaluated their added explanatory value and cross-site transfer using a strict site hold-out design to avoid information leakage. (3) Results: Five regimes were identified, representing combinations of emission intensity and ventilation strength. Incorporating regime information increased the explanatory power of simple NO₂ models and allowed the imputation of missing H₂S day using regime-aware random forest with an $R^2$ near 0.97. Regime labels remained identifiable using reduced sensor sets, while cross-site forecasting transferred well for NO₂ but was limited for PM, indicating stronger local effects for particles. (4) Conclusions: Operational-regime learning can transform short multivariate campaigns into practical and interpretable summaries of urban air pollution, while supporting data recovery and cautious model transfer. Full article

We aimed to establish a rapid and precise method for identifying and quantifying multi-species vegetable oil (corn oil, olive oil (OLO), soybean oil, and sunflower oil (SUO)) adulterations in camellia oil (CAO), using soft ionization by chemical reaction in transfer–high-resolution mass spectrometry (SICRIT-HRMS) and machine learning methods. The results showed that SICRIT-HRMS could effectively characterize the volatile profiles of pure and adulterated CAO samples, including binary, ternary, quaternary, and quinary adulteration systems. The low m/z region (especially 100–300) exhibited importance to oil classification in multiple feature-selection methods. For qualitative detection, binary classification models based on convolutional neural networks (CNN), Random Forest (RF), and gradient boosting trees (GBT) algorithms showed high accuracies (98.70–100.00%) for identifying CAO adulteration under no dimensionality reduction (NON), principal component analysis (PCA), and uniform manifold approximation and projection (UMAP) strategies. The RF algorithm exhibited relatively high accuracy (96.25–99.45%) in multiclass classification. Moreover, the five models, including CNN, RF, support vector machines (SVM), logistic regression (LR), and GBT, exhibited different performances in distinguishing pure and adulterated CAO. Among 1093 blind oil samples, under NON, PCA, and UMAP: 10, 5, and 67 samples were misclassified by CNN model; 6, 7, and 41 samples were misclassified by RF model; 8, 9, and 82 samples were misclassified by SVM model; 17, 18, and 78 samples were misclassified by LR model; 7, 9, and 43 samples were misclassified by GBT model. For quantitative prediction, the PCA-CNN model performed optimally in predicting adulteration levels in CAO, especially with respect to OLO and SUO, exhibiting a high coefficient of determination for calibration ($R_C^2$, 0.9664–0.9974) and coefficient of determination for prediction ($R_p^2$, 0.9599–0.9963) values, low root mean square error of calibration (RMSEC, 0.9–5.3%) and root mean square error of prediction (RMSEP, 1.1–5.8%) values, and RPD (5.0–16.3) values greater than 3.0. These results indicate that SICRIT-HRMS combined with machine learning can rapidly and accurately identify and quantify multi-species vegetable oil adulterations in CAO, which provides a reference for developing non-targeted and high-throughput detection methods in edible oil authenticity. Full article

Understanding when and where to shift land from agriculture to forestry is essential for designing sustainable land use strategies that align with climate, biodiversity, and rural development goals. However, traditional profitability comparisons rely on long-term discounting, which is highly sensitive to assumptions and often misaligned with the shorter-term decision-making horizons that are relevant for policymakers. This study presents a deposit-based framework that interprets annual timber biomass growth as accumulating economic value, enabling direct, per-hectare comparisons with yearly agricultural profits. The framework integrates parcel-level spatial data, land quality indicators, national statistics, and expert inputs to produce high-resolution maps of annual profitability for both agriculture and forestry. Applied to the case of Latvia, the results show strong spatial variation in agricultural returns, particularly in low-quality areas where profits are marginal or negative. By contrast, forestry provides more stable, though modest, economic gains across a wide range of biophysical conditions. These insights help identify where afforestation becomes a financially viable land use alternative. The framework is designed to be transferable to other regions by substituting local data on land quality, prices and growth. It complements policy instruments such as performance-based CAP payments and afforestation support, offering a future-oriented tool for spatially explicit and economically grounded land use planning. Full article

Boro-antimonite glasses doped with Eu³⁺ and having the general composition (90-x) Sb₂O₃–xB₂O₃–10Li₂O-0.5Eu₂O₃ (x = 0 to 60 in 10 mol. % increment) were prepared using the melt quenching method. The influence of B₂O₃/Sb₂O₃ substitution on the spectroscopy and photoluminescence of Eu³⁺ ions was analyzed by studying the measured and calculated properties of these glasses. The relative value of a given property was shown to increase or decrease by up to 26% with the addition of up to 60 mol. % B₂O₃, while the number of Eu³⁺ ions per unit volume increased by approximately 32%. Strong emissions were obtained in association with the transitions of Eu³⁺ (⁵D₀→⁷F_j, j = 1–4). A weak, broad emission centered at 450 nm was also detected. This emission is clearly linked to the glass composition. It originates from a potential presence of Eu²⁺ ions. This enhances ⁵D₀ level emission via charge transfer. The radiative and experimental lifetimes of the ⁵D₀ level increase linearly with B₂O₃ content. This results in high quantum efficiency (η) ranging from 74 to nearly 84%. Tunable chromaticity, as defined by the CIE 1931 standard, was achieved, resulting in a warm orange-red color with high brightness. These new glasses have a variety of potential laser-related applications. Full article

Sediment transport in alluvial channels is strongly controlled by the grain-size distribution of bed and suspended materials. This, in turn, influences river morphology by modifying the cross-sectional area and course of the channel. Statistical parameters such as mean, standard deviation, skewness, and kurtosis provide quantitative indicators of the energy conditions that control sediment transport and deposition. This study examines the depositional characteristics of sediments in the Ganga River in Varanasi City, India, employing a novel combination of linear discriminant function (LDF) and sediment transport index (STI). The LDF results reveal distinct depositional environments: Y₁ and Y₂ values indicate deposition in a low-energy fluvial environment similar to beaches, Y₃ values suggest shallow marine settings, and Y₄ values point to mixed deltaic and turbid current depositional environments. Additionally, CM diagrams show rolling and suspension as the dominant sediment transport mechanisms. Shear stress analysis combined with STI highlights significant depositional features, with minimal erosion observed throughout the study area. The study provides an operational framework for mapping erosion-deposition patterns on alluvial point bars that are transferable to other sand-bed rivers worldwide where detailed hydraulic data are limited but detailed grain-size and DEM information are available. Full article

Grasslands represent an essential resource for rural economies and for the provision of ecosystem services, yet they are increasingly affected by anthropogenic pressures, functional land-use changes, and institutional constraints. This study develops a geospatial decision-support framework for assessing grassland suitability in Hunedoara County, Romania, by integrating the Analytic Hierarchy Process (AHP) and Weighted Overlay Analysis (WOA) within a GIS environment. The assessment is based on nine criteria thematically grouped into three dimensions: (A) physical-geographical, including topographic suitability, climatic pressure, and hydrological risk exposure; (B) ecological and conservation-related, reflected by ecological conservation value, ecological carrying capacity, and the anthropic pressure index; and (C) socio-economic and functional, represented by spatial accessibility, recreational value, and policy support mechanisms. Suitability is defined as the integrated capacity of grasslands to sustain productive and multifunctional uses compatible with ecological conservation and the existing policy framework. Results indicate that 0.43% of the grassland area exhibits very high suitability (Class 1), 44.51% high suitability (Class 2), and 54.75% moderate suitability (Class 3), while unfavorable areas account for only 0.31% of the total (Class 4). The proposed methodology is reproducible and transferable, providing support for prioritizing management interventions, agri-environmental payments, and rural planning in mountainous and hilly regions. Full article

This study investigates the flow and heat transfer characteristics within a printed circuit heat exchanger (PCHE) equipped with airfoil fins. A numerical model of a counter-flow airfoil-fin PCHE was developed, using transcritical methane as the cold medium and a 50 wt% ethylene glycol aqueous solution (50% EGWS) as the hot medium. The effects of the airfoil fin array longitudinal staggering ratio (Ks), transverse pitch ratio (Kb), and longitudinal pitch ratio (Ka) on the thermal-hydraulic performance of the PCHE were systematically analyzed using the thermal performance factor (TPF) for comprehensive evaluation. The optimal configuration was determined to be Ks = 0.2, Kb = 0.5, and Ka = 1.0, achieving a TPF up to 1.18 times higher than that of the baseline structure (Ks = 1.0). The analysis highlights that aggressive heat transfer enhancement incurs a substantial pressure drop penalty; for instance, reducing Ka from 2.0 to 1.0 increases the Nusselt number (Nu) by approximately 13%, while simultaneously increasing the Fanning friction factor (f_Fanning) by 22%, indicating a significant pressure drop cost. The developed correlations exhibit deviations within ±10% of the simulated values over the Reynolds number (Re) range of 8000–25,000, providing a reliable tool for the optimized design of PCHEs. Full article

Skyros Island, the largest island of the Sporades Complex (NW Aegean Sea, Greece), preserves a geologically diverse record spanning from the Upper Permian to the Quaternary, including crystalline and non-metamorphosed carbonate rocks, ophiolitic rocks and mélanges, medium-grade metamorphic units, rare Miocene volcanic rocks, and impressive fossil-bearing sediments and tufa deposits, together with historically significant quarry and mining landscapes. Through a comprehensive evaluation of the geological heritage of Skyros, this study proposes a transferable, results-based framework for geoconservation, geoeducation, and tourism space management within a geopark context. A systematic inventory of twenty (20) geosites, including six (6) flagship case studies, was established based on scientific value, dominant geodiversity type, risk of degradation, accessibility, educational and tourism potential. The assessment integrates the Scientific Value and Risk of Degradation criteria with complementary management and sustainability indicators. The results demonstrate consistently high scientific value across the selected geosites, with several reaching maximum or near-maximum scores due to their rarity, integrity, and reference character at a regional to international scale. Although some geosites exhibit elevated degradation risk, overall vulnerability is considered manageable through targeted conservation measures and spatially explicit visitor management. Based on the assessment results, a network of thematic georoutes was developed and evaluated using route-level indicators, including number of geosites, route length, educational potential, tourism suitability, accessibility, and contribution to responsible geotourism. The study demonstrates how integrated geosite and georoute assessment can support sustainable land management and confirms that Skyros Island meets key criteria for inclusion in the Hellenic Geoparks Network, providing a robust scientific basis for future UNESCO Global Geopark designation. Full article

Due to increasing human activities underwater, there is a growing demand for high-speed underwater optical communication (UOWC) data links for security surveillance, environmental monitoring, pipeline inspection, and other applications. Line-of-sight communication is impossible under certain conditions due to misalignment, physical obstructions, irregular usage, and difficulty adjusting the receiver orientation, especially when used in environments with mobile users or submerged sensor networks. Therefore, non-line-of-sight (NLOS) optical communication is used in this study. Advanced modulation schemes—quadrature amplitude modulation and orthogonal frequency-division multiplexing (QAM-OFDM)—were used to transmit the signal underwater between two network nodes. QAM increases the data transfer rate, while OFDM reduces dispersion and inter-symbol interference (ISI). The proposed UOWC system is investigated using a 532 nm green laser diode (LD). Reliable high-speed data transmission of up to 15 Gbps is achieved over horizontal distances of 134 m, 43 m, 21 m, and 5 m in four different aquatic environments—pure water (PW), clear ocean (CLO), coastal ocean (COO), and harbor II (HarII), respectively. The system achieves effectively error-free performance within the simulation duration (BER < 10⁻⁹), with a received optical signal power of approximately −41.5 dBm. Clear constellation patterns and low BER values are observed, confirming the robustness of the proposed architecture. Despite the limitations imposed by non-line-of-sight (NLOS) communication and the diversity aquatic environments, our proposed architecture excels at underwater long-distance data transmission at high speeds. Full article

Defect modes in phononic crystals (PnCs) provide strongly localized resonances that are essential for frequency-dependent wave filtering and highly sensitive sensing. Their functionality increases greatly when their spectral characteristics can be externally tuned without altering the structural configuration. However, existing feedback control strategies rely on laminated piezoelectric defects, which have uniform electromechanical loading that causes voltage cancellation for even-symmetric defect modes. Consequently, only odd-symmetric defect bands can be manipulated effectively, which limits multi-band tunability. To overcome this constraint, we propose a segmented piezoelectric sensor–actuator design that enables symmetry-dependent feedback at the defect site. We develop a transfer-matrix analytical framework to incorporate complex-valued feedback gains directly into dispersion and transmission calculations. Analytical predictions demonstrate that real-valued feedback yields opposite stiffness modifications for odd- and even-symmetric modes. This enables the simultaneous tuning of both defect bands and induces an exceptional-point-like coalescence. In contrast, imaginary feedback preserves stiffness but modulates effective damping, generating a parity-dependent amplification-suppression response. The analytical results closely match those of fully coupled finite-element simulations, reducing computation time by more than two orders of magnitude. These findings demonstrate that segmentation-enabled feedback provides an efficient and scalable approach to tunable, multi-band, non-Hermitian wave control in piezoelectric PnCs. Full article

Global water management faces a critical challenge: whilst scholarly consensus recognises that multiple, interacting drivers fundamentally shape water availability and management capacity, operational governance frameworks fail to systematically incorporate this understanding. This disconnect is particularly acute in public good contexts where incomplete knowledge, diverse stakeholder values, and statutory planning mandates create distinct challenges. Using Australia’s Murray–Darling Basin as a pilot case, this research develops and demonstrates a rapid, policy-relevant heuristic for identifying, prioritising, and incorporating drivers of change in complex socio-ecological water systems. Through structured participatory deliberation with 70 experts spanning research, policy, industry, and community sectors across three sequential workshops and 15 semi-structured interviews, we systematically identified key drivers across environmental, governance, economic, social, and legacy dimensions. A risk and sensitivity assessment framework enabled prioritisation based on impact, vulnerability, and urgency. Climate change, drought, water quality events, and cumulative impacts emerged as the highest-priority future drivers, with climate change acting as a threat multiplier, whilst governance drivers show declining relative significance. Using these methodological innovations, we synthesise the I-PLAN heuristic: five interdependent dimensions (Integrative Knowledge, Prioritisation for Management, Linkages between Drivers, Adaptive Agendas, and Normative Collaboration) that provide water planners with a transferable, operational tool for driver identification and bridging to planning and management in data-sparse contexts. Full article