Search Results (59)

The analysis of traffic crashes facilitates the identification of trends that can inform strategies to enhance road safety. This study aimed to detect high-risk zones and forecast collision patterns by integrating spatial analysis and predictive modeling. Traffic incidents along the Chone–Flavio Alfaro road segment in Manabí, Ecuador, were examined using Geographic Information Systems (GIS) and Kernel Density Estimation (KDE), based on official data from the National Traffic Agency (ANT) covering the period 2017–2023. Additionally, ARIMA, Prophet, and Long Short-Term Memory (LSTM) models were applied to predict crash occurrences. The most influential contributing factors were driver distraction, excessive speed, and adverse weather. Four main crash hotspots were identified: near Chone (PS 0–2.31), PS 2.31–7.10, PS 13.39–21.31, and PS 31.27–33.92, close to Flavio Alfaro. A total of 55 crashes were recorded, with side impacts (27.3%), pedestrian-related collisions (14.5%), and rear-end crashes (12.7%) being the most frequent types. The predictive models performed well, with Prophet achieving the highest estimated accuracy (90.8%), followed by LSTM (88.2%) and ARIMA (87.6%), based on MAE evaluations. These findings underscore the potential of intelligent transportation systems (ITSs) and predictive analytics to support proactive traffic management and resilient infrastructure development in rural regions. Full article

Driver distraction can have severe safety consequences, particularly in public transportation. This paper presents a novel approach for detecting bus driver actions, such as mobile phone usage and interactions with passengers, using Kolmogorov–Arnold networks (KANs). The adversarial FGSM attack method was applied to assess the robustness of KANs in extreme driving conditions, like adverse weather, high-traffic situations, and bad visibility conditions. In this research, a custom dataset was used in collaboration with a partner company in the field of public transportation. This allows the efficiency of Kolmogorov–Arnold network solutions to be verified using real data. The results suggest that KANs can enhance driver distraction detection under challenging conditions, with improved resilience against adversarial attacks, particularly in low-complexity networks. Full article

Driver distraction remains a critical factor in road accidents, necessitating intelligent systems for real-time detection. This study introduces a novel fNIRS-based method to to classify varying levels of driver distraction across diverse simulated scenarios, including cognitive, visual–manual, and auditory sources of inattention. Unlike previous work, we evaluated multiple neurophysiological metrics—including oxygenated, deoxygenated, and combined haemoglobin—to identify the most reliable biomarker for distraction detection. Neurophysiological data were collected, and three multi-class classifiers (SVM, KNN, decision tree) were applied across different fNIRS metrics. Our results show that oxygenated haemoglobin outperforms other signals in distinguishing distracted from non-distracted states, while the combined signal performs best in differentiating distraction from baseline. The proposed SVM model achieved ≈ 77.9% accuracy in detecting distracted and relaxed driving states based on brain oxygen levels. Our findings also show that increased distraction correlates with elevated activity in the dorsolateral prefrontal cortex and premotor cortex, whereas driving without distraction exhibits lower neurovascular engagement. This study contributes to affective computing and intelligent transportation systems and could support the development of future driver distraction monitoring systems for safer and more adaptive vehicle control. Full article

This study examines human factors in bus accidents using bibliometric analysis to identify publications, research trends, and collaborative relationships between authors and institutions. Data from 1.834 publications in the Scopus database during the period 2014–2024 were analyzed using VOS viewer software to display network visualization and density. The results show a significant increase in publications since 2018, with a peak in 2022. Research related to human factors in bus accidents is growing, with a focus on fatigue, distraction, and driver behavior. The keyword and density analysis identified that “Human” was the most frequently discussed topic. China is the country with the highest contribution, and the medical field plays a major role in this topic. These findings highlight the importance of understanding human factors in efforts to improve transportation safety. Full article

The reconstruction of long bone defects after the primary traumatic, secondary infectious, or tumor-related loss of substance continues to represent a surgical challenge. Distraction osteogenesis using segmental transport, vascularized bone transfer, and the induced membrane technique (IMT) are established methods of reconstruction. IMT has become increasingly popular in recent decades due to its practicability, reproducibility, and reliability. At the same time, the original technique has undergone numerous modifications. The results are correspondingly heterogeneous. This article is intended to provide an overview of the current principles and modifications of IMT, outline the causes of failure of the IMT, and introduce the pearl-string technique (PST). The PST developed in our hospital is based on the pearl-string-like arrangement of thermodisinfected, decorticated femoral heads (TDFHs) in combination with a mechanically stable osteosynthetic construct. The TDFHs are biologically activated with either an RIA or autologous iliac crest bone graft. To gain a better understanding of these variations, the surgical technique of both procedures is illustrated step-by-step in this article. Full article

Horse-and-buggy transportation, vital for many rural communities and the Amish population, has been largely overlooked in safety research. This study examines the characteristics and injury severity of horse-and-buggy roadway crashes in Michigan’s rural areas. Detailed crash data are essential for safety studies, as crash scene descriptions are mainly found in narratives and diagrams. However, extracting and utilizing this information from traffic reports is challenging. This research tackles these challenges using image-processing and text-mining techniques to analyze crash diagrams and narratives. The study employs the AlexNet convolutional neural network (CNN) to identify and extract horse-and-buggy crashes, analyzing (2020–2023) Michigan UD-10 rural crash reports. Natural Language Processing (NLP) techniques also identified primary risk factors from crash narratives, analyzing single-word patterns (“unigrams”) and sequences of three consecutive words (“trigrams”). The findings emphasize the risks involved in horse-and-buggy interactions on rural roadways and highlight various contributing factors to the severity of these crashes, including distracted or careless actions by motorists, nighttime visibility issues, and failure to yield, especially by elderly drivers. This study suggests prioritizing horse-and-buggy riders in road safety and public health programs and recommends comprehensive measures that could significantly reduce crash incidence and severity, improving overall safety in Michigan’s rural areas, including better signage, driver education, and community outreach. Also, the study highlights the potential of advanced image-processing techniques in traffic safety research that could lead to more precise and actionable findings, enhancing road safety for all users. Full article

The emergence of micro-mobility transportation in urban areas has led to a transformative shift in mobility options, yet it has also brought about heightened traffic conflicts and crashes. This research addresses these challenges by pioneering the integration of image-processing techniques with machine learning methodologies to analyze crash diagrams. The study aims to extract latent features from crash data, specifically focusing on understanding the factors influencing injury severity among vehicle and micro-mobility crashes in Michigan’s urban areas. Micro-mobility devices analyzed in this study are bicycles, e-wheelchairs, skateboards, and e-scooters. The AlexNet Convolutional Neural Network (CNN) was utilized to identify various attributes from crash diagrams, enabling the recognition and classification of micro-mobility device collision locations into three categories: roadside, shoulder, and bicycle lane. This study utilized the 2023 Michigan UD-10 crash reports comprising 1174 diverse micro-mobility crash diagrams. Subsequently, the Random Forest classification algorithm was utilized to pinpoint the primary factors and their interactions that affect the severity of micro-mobility injuries. The results suggest that roads with speed limits exceeding 40 mph are the most significant factor in determining the severity of micro-mobility injuries. In addition, micro-mobility rider violations and motorists left-turning maneuvers are associated with more severe crash outcomes. In addition, the findings emphasize the overall effect of many different variables, such as improper lane use, violations, and hazardous actions by micro-mobility users. These factors demonstrate elevated rates of prevalence among younger micro-mobility users and are found to be associated with distracted motorists, elderly motorists, or those who ride during nighttime. Full article

Pedestrian distraction poses significant risks at signalized intersections, especially in populated urban areas. This study investigates the primary causes of pedestrian distraction to determine the contributing factors affecting crossing behavior. Data were collected from ten signalized intersections by conducting in-person interviews, performing real-time observation, and reviewing video recordings. The study used binary logistic regression and Heuristic Bin analysis to examine different levels of distraction among pedestrians. Three major types of pedestrian distractions were identified: visual, auditory, and cognitive distractions. From the regression analysis, two models were developed to predict moderate and high levels of distraction based on factors such as age, intersection location, walking behavior, use of electronic devices, and awareness of traffic signals. The results indicated that smartphone usage and earphones were the predominant sources of distraction. Pedestrians walking in pairs demonstrated higher levels of distraction than those walking alone or in groups. Heuristic Bins analysis revealed that females were slightly more distracted than males while walking alone, in pairs, or in a group. Pedestrians also tended to be more distracted when they were walking in pairs than when walking alone or in groups. Full article

Distracted driving remains a major concern on highways, with it contributing to severe and fatal crashes, particularly on high-speed routes, prompting numerous states to implement targeted initiatives aimed at combating traffic violations that significantly contribute to fatal and injury-inducing crashes. Among these initiatives is the highway safety corridor program, a collaborative endeavor between the state departments of transportation and law enforcement agencies. Highway safety corridors employ a combination of engineering interventions and heightened law enforcement presence to address risky driver behavior and mitigate the occurrence of crashes. Despite the longstanding existence of safety corridors, research on their effectiveness remains relatively limited, with existing studies indicating only moderate success rates. This study is dedicated to evaluating the effectiveness of ten highway safety corridors in Ohio, where the state recently launched its inaugural highway safety corridor program targeting distracted driving. Utilizing 2023 crash data, this Empirical Bayes’ before-and-after study seeks to gauge the impact of these safety corridors on enhancing roadway transportation safety. Upon assessing all crash types within Ohio’s distracted driving safety corridors that provided sufficient data for a before–after study, it was determined that the adoption of safety corridors generally led to a reduction in crashes ranging from 2% to 49%. The significance and magnitude of crash reduction may vary if specific crash types or severity levels are considered. Full article

The advancement of unloading technology in combine harvesting is crucial for the intelligent development of agricultural machinery. Accurately measuring material pile height in transport vehicles is essential, as uneven accumulation can lead to spillage and voids, reducing loading efficiency. Relying solely on manual observation for measuring stack height can decrease harvesting efficiency and pose safety risks due to driver distraction. This research applies binocular vision to agricultural harvesting, proposing a novel method that uses a stereo matching algorithm to measure material pile height during harvesting. By comparing distance measurements taken in both empty and loaded states, the method determines stack height. A linear regression model processes the stack height data, enhancing measurement accuracy. A binocular vision system was established, applying Zhang’s calibration method on the MATLAB (R2019a) platform to correct camera parameters, achieving a calibration error of 0.15 pixels. The study implemented block matching (BM) and semi-global block matching (SGBM) algorithms using the OpenCV (4.8.1) library on the PyCharm (2020.3.5) platform for stereo matching, generating disparity, and pseudo-color maps. Three-dimensional coordinates of key points on the piled material were calculated to measure distances from the vehicle container bottom and material surface to the binocular camera, allowing for the calculation of material pile height. Furthermore, a linear regression model was applied to correct the data, enhancing the accuracy of the measured pile height. The results indicate that by employing binocular stereo vision and stereo matching algorithms, followed by linear regression, this method can accurately calculate material pile height. The average relative error for the BM algorithm was 3.70%, and for the SGBM algorithm, it was 3.35%, both within the acceptable precision range. While the SGBM algorithm was, on average, 46 ms slower than the BM algorithm, both maintained errors under 7% and computation times under 100 ms, meeting the real-time measurement requirements for combine harvesting. In practical operations, this method can effectively measure material pile height in transport vehicles. The choice of matching algorithm should consider container size, material properties, and the balance between measurement time, accuracy, and disparity map completeness. This approach aids in manual adjustment of machinery posture and provides data support for future autonomous master-slave collaborative operations in combine harvesting. Full article

Driver distraction detection not only effectively prevents traffic accidents but also promotes the development of intelligent transportation systems. In recent years, thanks to the powerful feature learning capabilities of deep learning algorithms, driver distraction detection methods based on deep learning have increased significantly. However, for resource-constrained onboard devices, real-time lightweight models are crucial. Most existing methods tend to focus solely on lightweight model design, neglecting the loss in detection performance for small targets. To achieve a balance between detection accuracy and network lightweighting, this paper proposes a driver distraction detection method that combines enhancement and global saliency optimization. The method mainly consists of three modules: context fusion enhancement module (CFEM), channel optimization feedback module (COFM), and channel saliency distillation module (CSDM). In the CFEM module, one-dimensional convolution is used to capture information between distant pixels, and an injection mechanism is adopted to further integrate high-level semantic information with low-level detail information, enhancing feature fusion capabilities. The COFM module incorporates a feedback mechanism to consider the impact of inter-layer and intra-layer channel relationships on model compression performance, achieving joint pruning of global channels. The CSDM module guides the student network to learn the salient feature information from the teacher network, effectively balancing the model’s real-time performance and accuracy. Experimental results show that this method outperforms the state-of-the-art methods in driver distraction detection tasks, demonstrating good performance and potential application prospects. Full article

Global trade depends on long-haul transportation, yet comfort for drivers on lengthy trips is sometimes neglected. Rough roads have a major negative influence on driver comfort and increase the risk of weariness, distracted driving, and accidents. Using Random Forest regression, a machine learning technique well-suited to examining big datasets and nonlinear relationships, this study examines the relationship between road roughness and driver comfort. Using the MIRANDA mobile application, data were gathered from 1,048,576 rows, including vehicle acceleration and values for the International Roughness Index (IRI). The Support Vector Regression (SVR) and XGBoost models were used for comparative analysis. Random Forest was preferred because of its ability to be deployed in real time and use less memory, even if XGBoost performed better in terms of training time and prediction accuracy. The findings showed a significant relationship between driver discomfort and road roughness, with rougher roads resulting in increased vertical acceleration and lower comfort levels (Road Roughness: SD—0.73; Driver’s Comfort: Mean—10.01, SD—0.64). This study highlights how crucial it is to provide smooth surfaces and road maintenance in order to increase road safety, lessen driver weariness, and promote long-haul driver welfare. These results offer information to transportation authorities and policymakers to help them make data-driven decisions that enhance the efficiency of transportation and road conditions. Full article

One of the factors that threaten traffic safety and cause various traffic problems is distracted drivers. Various studies have been carried out to ensure traffic safety and, accordingly, to reduce traffic accidents. This study aims to determine driver-distraction classes and detect driver violations with deep learning algorithms and decision-making methods. Different driver characteristics are included in the study by using a dataset created from five different countries. Weight classification in the range of 0–1 is used to determine the most important classes using the AHP method, and the most important 9 out of 23 classes are determined. The YOLOv8 algorithm is used to detect driver behaviors and distraction action classes. The YOLOv8 algorithm is examined according to performance-measurement criteria. According to mAP 0.5:0.95, an accuracy rate of 91.17% is obtained. In large datasets, it is seen that a successful result is obtained by using the AHP method, which is used to reduce transaction complexity, and the YOLOv8 algorithm, which is used to detect driver distraction. By detecting driver distraction, it is possible to partially avoid traffic accidents and the negative situations they create. While detecting and preventing driver distraction makes a significant contribution to traffic safety, it also provides a significant improvement in traffic accidents and traffic congestion, increasing transportation efficiency and the sustainability of cities. It also serves sustainable development goals such as energy efficiency and reducing carbon emissions. Full article

The paper evaluates the DARS Traffic Plus mobile application within a realistic driving simulator environment to assess its impact on driving safety and user experience, particularly focusing on the Cooperative Intelligent Transport Systems (C-ITS). The study is positioned within the broader context of integrating mobile technology in vehicular environments to enhance road safety by informing drivers about potential hazards in real time. A combination of experimental methods was employed, including a standardised user experience questionnaire (meCUE 2.0), measuring quantitative driving parameters and eye-tracking data within a driving simulator, and post-experiment interviews. The results indicate that the mobile application significantly improved drivers’ safety perception, particularly when notifications about hazardous locations were received. Notifications displayed at the top of the mobile screen with auditory cues were deemed most effective. The study concludes that mobile applications like DARS Traffic Plus can play a crucial role in enhancing road safety by effectively communicating hazards to drivers, thereby potentially reducing road accidents and improving overall traffic safety. Screen viewing was kept below the safety threshold, affirming the app’s efficacy in delivering crucial information without distraction. These findings support the integration of C-ITS functionalities into mobile applications as a means to augment older vehicle technologies and extend the safety benefits to a broader user base. Full article

Cooperative intelligent transport systems (C-ITSs) are mass-produced and sold in Europe, promising enhanced safety and comfort. Direct vehicle communication, known as vehicle-to-everything (V2X) communication, is crucial in this context. Drivers receive warnings about potential hazards by exchanging vehicle status and environmental data with other communication-enabled vehicles. However, the impact of these warnings on drivers and their inclusion in accident reconstruction remains uncertain. Unlike sensor-based warnings, V2X warnings may not provide a visible reason for the alert, potentially affecting reaction times and behavior. In this work, a simulator study on V2X warnings was conducted with 32 participants to generate findings on reaction times and behavior for accident reconstruction in connection with these systems. Two scenarios from the Car-2-Car Communication Consortium were implemented: “Stationary Vehicle Warning—Broken-Down Vehicle” and “Dangerous Situation—Electronic Emergency Brake Lights”. Volkswagen’s warning concept was utilized, as they are the sole provider of cooperative vehicles in Europe. Results show that V2X warnings without visible reasons did not negatively impact reaction times or behavior, with average reaction times between 0.58 s (steering) and 0.69 s (braking). No significant distraction or search for warning reasons was observed. However, additional information in the warnings caused confusion and was seldom noticed by subjects. In this study, participants responded correctly and appropriately to the shown false-positive warnings. A wrong reaction triggering an accident is possible but unlikely. Overall, V2X warnings showed no negative impacts compared with sensor-based systems. This means that there are no differences in accident reconstruction regarding the source of the warning (sensors or communication). However, it is important that it is known that there was a warning, which is why the occurrence of V2X warnings should also be saved in the EDR in the future. Full article