Search Results (4,158)

Improving construction site safety remains a critical challenge in Saudi Arabia’s rapidly growing construction sector, where high accident rates and diverse labor forces demand evidence-based managerial interventions. This study investigated the influence of Managers’ Safety Perceptions and Practices (MSP) on Workers’ Safety Behaviors (WSB) in the Saudi construction industry, emphasizing the mediating roles of Workers’ Safety Awareness (WSA), Safety Competency (WSC), and Safety Actions (SA). The conceptual framework integrates these three mediators to explain how managerial attitudes and practices translate into frontline safety outcomes. A quantitative, cross-sectional design was adopted using a structured questionnaire distributed among construction workers, supervisors, and project managers. A total of 352 from 384 valid responses were collected, and the data were analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM) via SmartPLS 4. The findings revealed that MSP does not directly influence WSB but has significant indirect effects through WSA, WSC, and SA. Among these, WSC emerged as the most powerful mediator, followed by WSA and SA, indicating that competency is the most critical driver of safe worker behavior. These results provide robust empirical support for a multidimensional mediation model, highlighting the need for managers to enhance safety behaviors not merely through supervision but through fostering awareness and competency, providing technical training, and implementing proactive safety measures. Theoretically, this study contributes a novel and integrative framework to the occupational safety literature, particularly within underexplored Middle Eastern construction contexts. Practically, it offers actionable insights for safety managers, industry practitioners, and policymakers seeking to improve construction safety performance in alignment with Saudi Vision 2030. Full article

This paper presents a distributed measurement system intended to effectively monitor the health status of switchgears under varying temperature conditions. In particular, thermocouples are deployed as temperature sensors for the continuous monitoring of a medium-voltage (MV) switchgear. Then, by integrating a low-cost microcontroller unit, the proposed system can implement previously trained unsupervised learning techniques for health status evaluation. This approach enables the early detection of potential faults by identifying anomalous temperature patterns, thus supporting predictive maintenance and extending the lifespan of switchgears. The results show strong clustering performance with low execution times, highlighting the suitability of the method for resource-constrained hardware. Furthermore, onboard temperature processing eliminates the need for data transmission to remote servers, reducing latency and communication overhead while improving system responsiveness. The paper includes a numerical analysis on synthetic data as well as a validation on real measurements. Overall, the presented distributed measurement system offers a scalable and cost-effective solution to enhance the reliability and safety of MV switchgears. Full article

In clinical decision support systems (CDSSs), where accurate classification of drug–drug interactions (DDIs) can directly affect treatment safety and outcomes, identifying drug interactions is a major challenge, introducing a scalable approach for classifying DDIs utilizing a finely-tuned biomedical language model. The method shown here uses BiomedBERT, a domain-specific version of bidirectional encoder representations from transformers (BERT) that was pre-trained on biomedical literature, to reduce the number of resources needed during fine-tuning. Low-rank adaptation (LoRA) was used to fine-tune the model on the DrugBank dataset. The objective was to classify DDIs into two clinically distinct categories, that is, synergistic and antagonistic interactions. A pseudo-labeling strategy was created to deal with the problem of not having enough labeled data. A curated ground-truth dataset was constructed using polarity-labeled interaction entries from DrugComb and verified DrugBank antagonism pairs. The fine-tuned model is used to figure out what kinds of interactions there are in the rest of the unlabeled data. A checkpointing system saves predictions and confidence scores in small pieces, which means that the process can be continued and is not affected by system crashes. The framework is designed to log every prediction it makes, allowing results to be refined later, either manually or through automated updates, without discarding low-confidence cases, as traditional threshold-based methods often do. The method keeps a record of every output it generates, making it easier to revisit earlier predictions, either by experts or with improved tools, without depending on preset confidence cutoffs. It was built with efficiency in mind, so it can handle large amounts of biomedical text without heavy computational demands. Rather than focusing on model novelty, this research demonstrates how existing biomedical transformers can be adapted to polarity-aware DDI classification with minimal computational overhead, emphasizing deployment feasibility and clinical relevance. Full article

According to the Transportation Safety Board of Canada, between 2013 and 2023, 62% of aviation accidents occurred during the approach, landing, and post-impact phases of flight. Hence, this study targets factors contributing to increased accident rates during the final stages of flight. It will review how pilot experience influences decision-making and identifies mitigation strategies, focusing on go-arounds to prevent accidents during these critical phases. Surveys and roundtable discussions were conducted to identify factors influencing pilot performance during approach, landing, and go-around manoeuvres. By using a mixed-methods approach that combined thematic and statistical analyses, key safety factors were identified, including situational awareness, decision-making, and operational complexity. The study also examined the relationship between experience and decision-making, highlighting areas for targeted interventions to improve safety. The research emphasises the importance of integrating decision-making considerations into training programmes and connecting these to human factors. Through identifying areas for improvement, this study offers a safety-driven framework to address decision-making challenges during approach, landing, and go-around phases, with the objective of reducing accident and incident rates in general aviation. Full article

This project aimed to develop personal protective equipment (PPE) that provides full biological protection for the general public without the need for extensive training to use the equipment. With the proposal to develop a device guided by a smartphone monitoring application (to guide the user on the replacement of perishable components, ensuring their safety and biological protection in potentially contaminated places), the embedded electronics of this equipment were built, as well as their control system, including a smartphone app. Thus, a device was successfully developed to monitor and assist individuals in using an advanced PPE device. Full article

With the in-depth application of digital transformation in the oil industry, data-driven methods provide a new technical path for drilling engineering safety evaluation. In this paper, a data-driven drilling safety level evaluation system is proposed. By integrating the three-dimensional visualization technology of wellbore trajectory and the prediction model of friction torque, a dynamic and intelligent drilling risk evaluation framework is constructed. The Python platform is used to integrate geomechanical parameters, real-time drilling data, and historical working condition records, and the machine learning algorithm is used to train the friction torque prediction model to improve prediction accuracy. Based on the K-means clustering evaluation method, a three-tier drilling safety classification standard is established: Grade I (low risk) for friction (0–100 kN) and torque (0–10 kN·m), Grade II (medium risk) for friction (100–200 kN) and torque (10–20 kN·m), and Grade III (high risk) for friction (>200 kN) and torque (>20 kN·m). This enables intelligent quantitative evaluation of drilling difficulty. The system not only dynamically optimizes bottom-hole assembly (BHA) and drilling parameters but also continuously refines the evaluation model’s accuracy through a data backtracking mechanism. This provides a reliable theoretical foundation and technical support for risk early warning, parameter optimization, and intelligent decision-making in drilling engineering. Full article

UAV-based inspections are an effective way to ensure railway safety and have gained significant attention. However, images captured during complex weather conditions, such as rain, snow, or fog, often suffer from severe degradation, affecting image recognition accuracy. Existing algorithms for removing rain, snow, and fog have two main limitations: they do not adaptively learn features under varying weather complexities and struggle with managing complex noise patterns in drone inspections, leading to incomplete noise removal. To address these challenges, this study proposes a novel framework for removing rain, snow, and fog from drone images, called WeatherClean. This framework introduces a Weather Complexity Adjustment Factor (WCAF) in a parameterized adjustable network architecture to process weather degradation of varying degrees adaptively. It also employs a hierarchical multi-scale cropping strategy to enhance the recovery of fine noise and edge structures. Additionally, it incorporates a degradation synthesis method based on atmospheric scattering physical models to generate training samples that align with real-world weather patterns, thereby mitigating data scarcity issues. Experimental results show that WeatherClean outperforms existing methods by effectively removing noise particles while preserving image details. This advancement provides more reliable high-definition visual references for drone-based railway inspections, significantly enhancing inspection capabilities under complex weather conditions and ensuring the safety of railway operations. Full article

Slope stability assessment is a critical component of engineering safety. Conventional analytical methods frequently struggle to integrate heterogeneous slope data and model intricate failure mechanisms, thereby constraining their efficacy in practical engineering scenarios. To tackle these issues, this study presents a novel slope stability classification model grounded in the Optuna-TPE-CatBoost framework. By leveraging the Tree-structured Parzen Estimator (TPE) within the Optuna framework, the model adaptively optimizes CatBoost hyperparameters, thus enhancing prediction accuracy and robustness. It incorporates six key features—slope height, slope angle, unit weight, cohesion, internal friction angle, and the pore pressure ratio—to establish a comprehensive and intelligent assessment system. Utilizing a dataset of 272 slope cases, the model was trained with k-fold cross-validation and dynamic class imbalance strategies to ensure its generalizability. The optimized model achieved impressive performance metrics: an area under the receiver operating characteristic curve (AUC) of 0.926, an accuracy of 0.901, a recall of 0.874, and an F1-score of 0.881, outperforming benchmark algorithms such as XGBoost, LightGBM, and the unoptimized CatBoost. Validation via engineering case studies confirms that the model accurately evaluates slope stability across diverse scenarios and effectively captures the complex interactions between key parameters. This model offers a reliable and interpretable solution for slope stability assessment under complex failure mechanisms. Full article

Accurate forecasting of river siltation is essential for ensuring inland waterway navigability and guiding sustainable sediment management. This study investigates the downstream reach of the Shihutang navigation power hub along the Ganjiang River in Jiangxi Province, China, an area characterized by pronounced seasonal sedimentation and hydrological variability. To enable fine-scale prediction, we developed a data-driven framework using a random forest regression model that integrates high-resolution bathymetric surveys with hydrological and meteorological observations. Based on the field data from April to July 2024, the model was trained to forecast monthly siltation volumes at a 30 m grid scale over a six-month horizon (July–December 2024). The results revealed a marked increase in siltation from July to September, followed by a decline during the winter months. The accumulation of sediment, combined with falling water levels, was found to significantly reduce the channel depth and width, particularly in the upstream sections, posing a potential risk to navigation safety. This study presents an initial, yet promising attempt to apply machine learning for spatially explicit siltation prediction in data-constrained river systems. The proposed framework provides a practical tool for early warning, targeted dredging, and adaptive channel management. Full article

Chainsaws are widely used in various occupational settings, including forestry, landscaping, farming, and by homeowners for tasks like tree felling, brush clearing, and firewood cutting. However, the use of chainsaws poses significant risks to operators and bystanders. This research quantified and compared occupational and nonoccupational injuries caused by contact with chainsaws and related objects during the period from 2018 to 2022. The emergency department and OSHA (Occupational Safety and Health Administration) data were used to characterize the cause and nature of the injuries. Results suggest that for this five-year period an estimated 127,944 people were treated in U.S. emergency departments for chainsaw-related injuries. More than 200 non-fatal and 57 fatal occupational chainsaw-involved injuries were found during the same period. Landscaping and forestry were the two industries where most of the occupational victims were employed. Upper and lower extremities were the most likely injured body parts, with open wounds from cuts being the most common injury type. The majority of fatal injuries were caused by falling objects such as trees and tree limbs while using a chainsaw. Our suggestions to reduce injuries include proper training and wearing personal protective equipment, as well as making sure any bystanders are kept in a safety zone away from trees being cut. Full article

Background: Pain is a problem faced by critically ill surgical patients and has a major impact on their outcomes. Pain assessment is therefore essential for effective pain management, with a combination of pharmacological and non-pharmacological treatment. Clinical supervision, supported by models such as SafeCare, can improve professional development, safety and the quality of care in intensive care units. Objectives: This study aimed to: (1) assess current pain assessment practices in a polyvalent Intensive Care Unit (ICU) in the Porto district; (2) identify nurses’ training needs regarding the Clinical Supervision-Sensitive Indicator—Pain; and (3) evaluate the impact of clinical supervision sessions on pain assessment practices. Methods: A quantitative, quasi-experimental, cross-sectional study with a pre- and post-intervention design was conducted. Based on the SafeCare model, it included a situational diagnosis, 6 clinical supervision sessions (February 2023), and outcome evaluation via nursing record audits (November 2022 and May 2023) in 31 total critical ill patients. Pain was assessed using standardised tools, in line with institutional protocols. Data was analysed using Software Statistical Package for the Social Sciences v25.0. Results: Pain was highly prevalent in the first 24 h, decreasing during hospitalisation. Generalised acute abdominal pain predominated, with mild to moderate intensity, and was exacerbated by wound care and mobilisation/positioning. Pain management combined pharmacological and non-pharmacological treatment. There was an improvement in all the parameters of the pain indicator post-intervention. Conclusions: Despite routine assessments, gaps remained in reassessing pain post-analgesia and during invasive procedures. Targeted clinical supervision and ongoing training proved effective in improving compliance with protocols and supporting safer, more consistent pain management. Full article

This study assessed the effectiveness of stress-based cognitive-behavioral training compared to standard training in firefighters, emphasizing their ability to distribute extinguishing water and cool environments evenly during enclosure fires. Experiments took place at the Zbiroh training facility with two firefighter teams (Team A with stress-based training and Team B with standard training) under realistic conditions. Using 58 thermocouples and 4 radiometers, temperature distribution and radiant heat flux were measured to evaluate water distribution efficiency and cooling performance during interventions. Team A consistently achieved temperature reductions of approximately 320 °C in the upper layers and 250–400 °C in the middle layers, maintaining stable conditions, whereas Team B only achieved partial cooling, with upper-layer temperatures remaining at 750–800 °C. Additionally, Team A recorded lower radiant heat flux densities (e.g., 20.74 kW/m² at 0°) compared to Team B (21.81 kW/m²), indicating more effective water application and adaptability. The findings confirm that stress-based training enhances firefighters’ operational readiness and their ability to distribute water effectively during interventions. This skill is essential for safer and effective management of indoor fires under extreme conditions. This study supports the inclusion of stress-based and scenario-based training in firefighter education to enhance safety and operational performance. Full article

Background and Objectives: Depression is a leading cause of disability globally, with treatment challenges including limited access, stigma, and poor adherence. Gamification, which applies game elements such as points, levels, and storytelling into non-game contexts, offers a promising strategy to enhance engagement and augment traditional treatments. Our research is the first study designed to explore the implementation of gamification within the Malaysian context. The objective was to explore the feasibility of implementation of gamification as an adjunctive treatment for adults with depression. Materials and Methods: Focus group discussions were held with five mental health professionals and ten patients diagnosed with moderate depression. The qualitative component assessed perceptions of gamified interventions, while quantitative measures evaluated participants’ depressive and anxiety symptomatology. Results: Three key themes were identified: (1) understanding of gamification as a treatment option, (2) factors influencing its acceptance, and (3) characteristics of a practical and feasible intervention. Clinicians saw potential in gamification to boost motivation, support psychoeducation, and encourage self-paced learning, but they expressed concerns about possible addiction, stigma, and the complexity of gameplay for some patients. Patients spoke of gaming as a source of comfort, escapism, and social connection. Acceptance was shaped by engaging storylines, intuitive design, balanced difficulty, therapist guidance, and clear safety measures. Both groups agreed that gamification should be used in conjunction with standard treatments, be culturally sensitive, and be presented as a meaningful therapeutic approach rather than merely as entertainment. Conclusions: Gamification emerges as an acceptable and feasible supplementary approach for managing depression in Malaysia. Its success depends on culturally sensitive design, robust clinical oversight, and seamless integration with existing care pathways. Future studies should investigate long-term outcomes and establish guidelines for the safe and effective implementation of this approach. We recommend targeted investment into culturally adapted gamified tools, including training, policy development, and collaboration with key stakeholders to realistically implement gamification as a mental health intervention in Malaysia. Full article

Background/Objectives: Improving health outcomes for Indigenous people by strengthening the cultural safety of care is a vital challenge for the health sector. University Departments of Rural Health (UDRH), academic centres based in regional, rural, and remote (RRR) locations across Australia, are uniquely positioned to foster a culturally safe rural health workforce through training, education, and engagement with Indigenous communities. This narrative review examines the contributions of UDRHs to health workforce issues through analysis of their publications focused on Indigenous health. Methods: Research articles relating to workforce were identified from an established database of UDRH Indigenous health-related publications published 2010–2021. Results: Of 46 articles identified across the 12 years, 19 focused on developing the understanding and cultural safety skills of university students studying in a health field, including campus-based Indigenous health education and support for students undertaking rural clinical placements. Twelve articles investigated cultural safety skills and recruitment and retention of the rural health workforce. Fifteen articles focused on Indigenous people in the health workforce, examining clinical training and resources, and the enablers and barriers to retaining Indigenous students and workers. Conclusions: This analysis highlights the sustained efforts of UDRHs to improve Indigenous health through multiple areas within their influence, including curriculum design, health student training on campus, and rural placement opportunities to transform understanding of Indigenous strengths and disadvantages and rural health workforce development. A continuing effort is needed on ways UDRHs can support Indigenous health students during their studies and while on placement, how to improve cultural safety in the health workforce, and ways to better support Indigenous health professionals. Full article

Coarse-grained soils serve as essential fill materials in earth–rock dam engineering, where their mechanical properties critically influence dam deformation and stability, directly impacting project safety. Artificial intelligence (AI) techniques are emerging as powerful tools for predicting the mechanical properties of coarse-grained soils. However, AI-based prediction models for these properties face persistent challenges, particularly in parameter tuning—a process requiring substantial computational resources, extensive time, and specialized expertise. To address these limitations, this study proposes a novel prediction model that integrates Adaptive Simulated Annealing (ASA) with an improved Particle Swarm Optimization (PSO) algorithm to optimize the Elman Neural Network (ENN). The methodology encompasses three key aspects: First, the standard PSO algorithm is enhanced by dynamically adjusting its inertial weight and learning factors. The ASA algorithm is then employed to optimize the Adaptive PSO (APSO), effectively mitigating premature convergence and local optima entrapment during training, thereby ensuring convergence to the global optimum. Second, the refined PSO algorithm optimizes the ENN, overcoming its inherent limitations of slow convergence and susceptibility to local minima. Finally, validation through real-world engineering case studies demonstrates that the ASA-PSO-optimized ENN model achieves high accuracy in predicting the mechanical properties of coarse-grained soils. This model provides reliable constitutive parameters for stress–strain analysis in earth–rock dam engineering applications. Full article