Search Results (206)

This study developed a water-soluble antifouling coating to protect ship hulls against corrosion and fouling without the usage of a primer. The coating retains its adhesion to the steel substrate and reduces corrosion rates compared to those for uncoated specimens. The coating’s protective properties rely on the interaction of conductive polyaniline (PAni) nanorods, magnetite (Fe₃O₄) nanoparticles, and graphene oxide (GO) sheets modified with titanium dioxide (TiO₂) nanoparticles. The PAni/Fe₃O₄ nanocomposite improves the antifouling layer’s out-of-plane conductivity, whereas GO increases its in-plane conductivity. The anisotropy in the conductivity distribution reduces the electrostatic attraction and limits primary bacterial and pathogen adsorption. TiO₂ augments the conductivity of the PAni nanorods, enabling visible light to generate H₂O₂. The latter decomposes into H₂O and O₂, rendering the coating environmentally benign. The coating acts as an effective barrier with limited permeability to the steel surface, demonstrating outstanding durability for naval steel over extended periods. Full article

Dendrons, also named dendritic wedges, are a kind of molecular tree, having a branched structure linked to a functional core. The functional core can be used in particular for the functionalization of materials. Different types of dendrons are known, synthesized either by a convergent process, from the external part to the core, or by a divergent process from the core to the external part. Polyphosphorhydrazone (PPH) dendrons are always synthesized by a divergent process, which enables a fine-tuning of both the core function and the external functions. They have been used for the functionalization of diverse materials such as silica, titanium dioxide, gold, graphene oxide, or different types of nanoparticles. Nanocomposites based on materials functionalized with PPH dendrons have been used in diverse fields such as catalysts, chemical sensors, for trapping pollutants, to support cell cultures, and against cancers, as will be emphasized in this review. Full article

Herein, electrospun nanofibers composed of polyaniline (PANI), polyethylene oxide (PEO), and Luffa cylindrica (LC) cellulose, reinforced with titanium dioxide (TiO₂) nanoparticles, were synthesized via electrospinning to investigate the effect of TiO₂ nanoparticles on PANI/PEO/LC nanocomposites and the effect of conductivity on nanofiber morphology. Cellulose extracted from luffa was added to the PANI/PEO copolymer solution, and two different ratios of TiO₂ were mixed into the PANI/PEO/LC biocomposite. The morphological, vibrational, and thermal characteristics of biocomposites were systematically investigated using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). As anticipated, the presence of TiO₂ enhanced the electrical conductivity of biocomposites, while the addition of Luffa cellulose further improved the conductivity of the cellulose-based nanofibers. FTIR analysis confirmed chemical interactions between Luffa cellulose and PANI/PEO matrix, as evidenced by the broadening of the hydroxyl (OH) absorption band at 3500–3200 cm⁻¹. Additionally, the emergence of characteristic peaks within the 400–1000 cm⁻¹ range in the PANI/PEO/LC/TiO₂ spectra signified Ti–O–Ti and Ti–O–C vibrations, confirming the incorporation of TiO₂ into the biocomposite. SEM images of the biocomposites reveal that the thickness of nanofibers decreases by adding Luffa to PANI/PEO nanofibers because of the nanofibers branching. In addition, when blending TiO₂ nanoparticles with the PANI/PEO/LC biocomposite, this increment continued and obtained thinner and smother nanofibers. Furthermore, the incorporation of cellulose slightly improved the crystallinity of the nanofibers, while TiO₂ contributed to the enhanced crystallinity of the biocomposite according to the XRD and DCS results. Similarly, the TGA results supported the DSC results regarding the increasing thermal stability of the biocomposite nanofibers with TiO₂ nanoparticles. These findings demonstrate the potential of PANI/PEO/LC/TiO₂ nanofibers for advanced applications requiring conductive and structurally optimized biomaterials, e.g., for use in humidity or volatile organic compound (VOC) sensors, especially where flexibility and environmental sustainability are required. Full article

This study reports the impact of a silver nanoparticles/reduced graphene oxide@titanium dioxide nanocomposite (Ag/rGO@TiO₂) on the mechanical and biocompatibility properties of poly(styrene-co-methylmethacrylate)/poly methyl methacrylate (PS-PMMA/PMMA)-based bone cement. The chemical, structural, mechanical, and thermal characteristics of Ag/rGO@TiO₂ nanocomposite-reinforced PS-PMMA bone cement ((Ag/rGO@TiO₂)/(PS-PMMA)/PMMA) were evaluated using Fourier Transform Infrared spectroscopy (FT-IR), X-ray diffraction (XRD), nano-indentation, and electron microscopy. FT-IR, XRD, and transmission electron microscopy results confirmed the successful synthesis of the nanocomposite and the nanocomposite-incorporated bone cement. The elastic modulus (E) and hardness (H) of the ((Ag/rGO@TiO₂)/(PS-PMMA)/PMMA) bone cement were measured to be 5.09 GPa and 0.202 GPa, respectively, compared to the commercial counterparts, which exhibited E and H values of 1.7 GPa to 3.7 GPa and 0.174 GPa, respectively. Incorporating Ag/rGO@TiO₂ nanocomposites significantly enhanced the thermal properties of the bone cement. Additionally, in vitro studies demonstrated that the bone cement was non-toxic to the MG63 cell line. Full article

Bio-nanocomposite films were prepared using chitosan, gelatin, and varying concentrations (0, 0.5, 1.0, 2.0, and 5.0 wt%) of titanium dioxide (TiO₂) nanoparticles in acetic acid via a casting method. The incorporation of TiO₂ nanoparticles into the bio-chitosan matrix enhanced ultraviolet (UV) absorption and improved the films’ physical, mechanical, and electrical properties. Additionally, the TiO₂-loaded films exhibited antimicrobial activity, contributing to the extended preservation of packaged products by inhibiting microbial growth. Notably, the bio-nanocomposite films containing 1.0 wt% TiO₂ exhibited an electroactive response, bending under relatively low electric field strength (250 V/mm), whereas the control film without TiO₂ required higher field strength (550 V/mm) to achieve bending. This indicates potential applications in electroactive actuators requiring precise movement control. Among the tested concentrations, films containing 0.5 wt% and 1.0 wt% TiO₂ (Formulas 7 and 8) demonstrated optimal performance. These films presented a visually appealing appearance with no tear marks, low bulk density (0.91 ± 0.04 and 0.85 ± 0.18 g/cm³), a satisfactory electromechanical response at 250 V/m (17.85 ± 2.58 and 61.48 ± 6.97), low shrinkage percentages (59.95 ± 3.59 and 54.17 ± 9.28), high dielectric constant (1.80 ± 0.07 and 8.10 ± 0.73), and superior UV absorption compared with pure bio-chitosan films, without and with gelatin (Formulas 1 and 6). Full article

Microplastics have emerged as pervasive contaminants in various ecosystems, raising considerable concerns regarding their impact on environmental health and public safety. The degradation of microplastics is thus recognized as a pressing global challenge. Photocatalytic degradation has emerged as a promising approach due to its potential for efficiency and environmental sustainability. Nevertheless, there remains a need to investigate emerging trends and advancements to understand and fully optimize this technique. Consequently, PRISMA guidelines were employed to define the search parameters, enable the identification of pertinent scholarly articles, and systematically gather bibliographic data from the published literature from 2005 to October 2024. A bibliometric analysis of 204 research articles derived from merged Scopus and Web of Science datasets was conducted to map the field’s research landscape. The analysis showed a robust annual publication growth rate of 17.94%, with leading contributions from China, India, Mexico, and the United Kingdom. Keyword analysis revealed that the commonly applied photocatalysts are titanium dioxide and zinc oxide in the photocatalytic degradation of polyethylene terephthalate, polypropylene, polystyrene, polyvinyl chloride, high-density polyethylene, and low-density polyethylene. Advances in collaboration across Asia and Europe have bolstered the research landscape. However, challenges persist in achieving cost-effective scalability, ensuring the safety of degradation byproducts, and translating laboratory findings into real-world applications. Emerging trends include the development of visible-light-responsive catalysts, advanced nanocomposites, and sustainable photocatalytic technologies. This study underscores the utility of bibliometric tools in identifying knowledge gaps and guiding the development of innovative approaches for microplastic degradation as part of environmental remediation efforts. Full article

Local temperature measurement is crucial for understanding nanoscale thermal transport and developing nanodevices for biomedical, photonic, and optoelectronic applications. The rise of photothermal therapy for cancer treatment has increased the demand for high-resolution nanothermometric techniques capable of non-contact intracellular temperature measurement and modification. Raman spectroscopy meets this need: the ratio of anti-Stokes to Stokes Raman intensities for a specific vibrational mode correlates with local temperature through the Boltzmann distribution. The present study proposes a novel photothermal therapy agent designed to advance the current state of the art while adhering to green chemistry principles, thereby favoring low-temperature synthesis involving limited energy consumption. A key challenge in this field is to achieve close contact between plasmonic nanosystems, which act as nanoheaters, and local temperature sensors. This is achieved by employing silver nanoparticles as a heat release agent, coated with anatase-phase titanium dioxide, as a local temperature sensor. The proposed synthesis, which combines refluxing and subcritical solvothermal treatments, enables direct anatase formation, despite its metastability under standard conditions, thus eliminating the need for a calcination step. Structural characterization through SAED-HRTEM and Raman spectroscopy confirms the successful crystallization of the desired phase. Moreover, the nanothermometry measurements conducted at various wavelengths ultimately demonstrate both the effectiveness of these nanomaterials as thermometric probes, with a relative sensitivity of about 0.24 K⁻¹%, and their capability as local heaters, with a release of a few tens of degrees. This work demonstrates a new synthetic strategy for these nanocomposites, which offers a promising pathway for the optimization of nanosystems in therapeutic applications. Full article

Nano-titanium dioxide ceramic coatings exhibit excellent wear resistance, corrosion resistance, and self-cleaning properties, showing great potential as multifunctional protective materials. This study proposes a synergistic reinforcement strategy by encapsulating micron-sized Al₂O₃ particles with nano-TiO₂. A core-shell structured nanocomposite coating composed of 65 wt% nano-TiO₂ encapsulating 30 wt% micron-Al₂O₃ was precisely designed and fabricated via a slurry dip-coating method on Q235 steel substrates. The microstructure and surface morphology of the coatings were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD). Comprehensive performance evaluations including densification, adhesion strength, wear resistance, and thermal shock resistance were conducted. Optimal coating properties were achieved under the conditions of a binder-to-solvent ratio of 1:15 (g/mL), a heating rate of 2 °C/min, and a sintering temperature of 400 °C. XRD analysis confirmed the formation of multiple crystalline phases during the 400 °C curing process, including titanium pyrophosphate (TiP₂O₇), aluminum phosphate (AlPO₄), copper aluminate (Cu(AlO₂)₂), and a unique titanium phosphate phase (Ti₃(PO₄)₄) exclusive to the 2 °C/min heating rate. Adhesion strength tests revealed that the coating sintered at 2 °C/min exhibited superior interfacial bonding strength and outstanding performance in wear resistance, hardness, and thermal shock resistance. The incorporation of nano-TiO₂ into the 30 wt% Al₂O₃ matrix significantly enhanced the mechanical properties of the composite coating. Mechanistic studies indicated that the bonding between the nanocomposite coating and the metal substrate is primarily achieved through mechanical interlocking, forming a robust physical interface. These findings provide theoretical guidance for optimizing the fabrication process of metal-based ceramic coatings and expanding their engineering applications in various industries. Full article

The aim of this study was to produce a coating for protective glass glued to touch displays with high antibacterial effectiveness. This paper presents the structural, mechanical, optical, and antibacterial properties of a TiO₂:Ag–Pt coating prepared by dual reactive DC and RF magnetron sputtering. Characterization techniques used include XRD, TEM with EDS, SEM, AFM, nanoindentation for hardness and Young’s modulus, wettability tests, and optical property analysis. The coating exhibited columnar crystals with a width of 30–50 nm. Crystals of anatase, rutile, silver, and platinum with a size of up to 3 nm were identified. The coating deposited on glass had a concentration of 5.0 ± 0.2% at. Ag and 4.4 ± 0.1% at. Pt. The value of the optical band gap energy, corresponding to the direct transition, was 3.36 eV, while Urbach’s energy was in the order of 500 meV. The hydrophilic coating had a roughness RMS = 1.8 ± 0.2 nm, hardness HV = 6.8 ± 0.5 GPa, and Young’s modulus E = 116 ± 8 GPa. A unique combination of the phase composition of the TiO₂:Ag–Pt coating, metallic Ag and Pt nanoparticles in a ceramic matrix of anatase and rutile crystallites resulted a >90% reduction of Staphylococcus aureus bacteria. This antibacterial effect was attributed to the activation of the doped semiconductor under visible light via plasmon resonance of the Ag and Pt nanoparticles, as well as a light-independent antibacterial action due to Ag⁺ ion release. In contrast, commercial antibacterial coatings typically achieve only around 60% bacterial reduction. Full article

Organophosphorus pesticides (OPs), while pivotal for agricultural productivity, pose severe environmental and health risks due to their persistence and bioaccumulation. Existing detection methods, such as chromatography and spectroscopy, face limitations in field adaptability, cost, and operational complexity. To address these challenges, this study introduces a novel dual-mode photoelectrochemical–electrochemical (PEC-EC) sensor based on a Co,N-TiO₂@ZrO₂/3DGH nanocomposite. The sensor synergistically integrates zirconium oxide (ZrO₂) for selective OP capture via phosphate-Zr coordination, cobalt-nitrogen co-doped titanium dioxide (Co,N-TiO₂) for visible-light responsiveness, and a three-dimensional graphene hydrogel (3DGH) for enhanced conductivity. In the PEC mode under light irradiation, OP adsorption induces charge recombination, yielding a logarithmic photocurrent attenuation with a detection limit of 0.058 ng mL⁻¹. Subsequently, the EC mode via square wave voltammetry (SWV) self-validates the results, achieving a detection limit of 0.716 ng mL⁻¹. The dual-mode system demonstrates exceptional reproducibility, long-term stability, and selectivity against common interferents. Parallel measurements revealed <5% inter-mode discrepancy, validating the intrinsic self-checking capability. This portable platform bridges the gap between laboratory-grade accuracy and field-deployable simplicity, offering transformative potential for environmental monitoring and food safety management. Full article

This study focused on synthesizing polyvinyl alcohol (PVA) utilizing glutaraldehyde (GA) as a crosslinking agent and silicon dioxide (SiO₂) nanopowder with titanium dioxide (TiO₂) nanopowder to reduce or prevent the hydrophilic property of PVA. Integrating SiO₂ and TiO₂ into the PVA boosted the hydrophobicity, thermal properties, and self-cleaning of the PVA film. The characteristic properties of PVA/GA, PVA/SiO₂/GA, and PVA/SiO₂/TiO₂/GA nanocomposites polymer membranes were investigated by gel content, swelling capacity, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction patterns (XRD), scanning electron microscope (SEM), thermal gravimetric analysis (TGA), and contact angle. The resulting PVA/5%SiO2/1%TiO₂/GA nanocomposite exhibits much better physical properties than PVA/GA hydrogel (water absorbency from 3.1 g/g to 0.07 g/g and contact angel from 0° to 125°). In addition, the nanocomposite retains very low swelling properties. These prepared nanocomposites are promising in a variety of applications such as sand soil stabilizers, construction, and building works where they exhibit excellent water resistance performance. This study introduces a novel approach for creating hydrophobic polymeric membranes from hydrophilic polymeric materials to stabilize sandy soil effectively. Full article

This research investigates the enhanced photocatalytic activity of cuprous oxide (Cu₂O) nanoparticles (NPs)-titanium dioxide (TiO₂) nanotube (NT) composites for air purification, focusing on the removal of volatile organic compounds (VOCs) and Escherichia coli (E. coli) bacteria under simulated sunny light. Cu₂O-NPs were successfully deposited onto TiO₂-NTs via the successive ionic layer adsorption and reaction method. The resulting p- and n-type semiconductor heterojunction nanocomposites were characterized using various techniques, including scanning electron microscopy, transmission electron microscopy, ultraviolet–visible-light spectroscopy, and chlorinated radicals. The photocatalytic activity was evaluated for different VOCs present in indoor air (butadione, chloroform, and butyraldehyde) in the presence of E. coli bacteria. The results showed that the Cu₂O-NPs/TiO₂-NTs composites exhibited enhanced photocatalytic activity compared to pure TiO₂-NTs. The Langmuir–Hinshelwood model was used to describe the degradation kinetics, revealing that Cu₂O loading and the nature of the target pollutant influence the photocatalytic efficiency. This study has also highlighted the role of chlorinated radicals in the degradation process, especially for chloroform. The degradation process of chloroform generated chlorine radicals, which not only contributed to the degradation of other VOCs, but also enhanced the overall oxidative capacity of the system. This synergistic effect was observed to accelerate pollutant removal and improve the antibacterial efficacy against E. coli. The Cu₂O-NPs/TiO₂-NTs composites demonstrated significant reusability and antibacterial properties, highlighting their potential for sustainable indoor air purification applications. Full article

In this study, silver nanoparticles (Ag NPs) were synthesized on the surface of rutile-phase titanium dioxide (R-TiO₂) using a plasma-assisted technique. Comprehensive analyses were conducted to investigate the structural, morphological, optical, and electrical properties of the synthesized nanocomposites. Transmission electron microscopy (TEM) images revealed the uniform decoration of Ag NPs (average size: 29.8 nm) on the R-TiO₂ surface. X-ray diffraction (XRD) confirmed the polycrystalline nature of the samples, with decreased diffraction peak intensity indicating reduced crystallinity due to Ag decoration. The Williamson–Hall analysis showed increased crystallite size and reduced tensile strain, suggesting grain growth and stress relief. Raman spectroscopy revealed quenching and broadening of R-TiO₂ vibrational modes, likely due to increased oxygen vacancies. X-ray photoelectron spectroscopy (XPS) confirmed successful plasma-assisted deposition and the coexistence of Ag⁰ and Ag⁺ states, enhancing surface reactivity. UV-Vis spectroscopy demonstrated enhanced light absorption across the spectral range, attributed to localized surface plasmon resonance (LSPR), and a reduced optical bandgap. Dielectric properties, including dielectric constants, loss factor, and AC conductivity, were evaluated across frequencies (4–8 MHz) and temperatures (20–240 °C). The AC conductivity results indicated correlated barrier hopping (CBH) and overlapping large polaron tunneling (OLPT) as the primary conduction mechanisms. Composition-dependent dielectric behavior was interpreted through the Coulomb blockade effect. These findings suggest the potential of plasma assisted Ag NP-decorated R-TiO₂ nanostructures for photocatalysis, sensor and specific electro electrochemical systems applications. Full article

Accurate relative humidity (RH) measurement is critical in many applications, from process control and material preservation to ensuring human comfort and well-being. This study presents high-performance humidity sensors based on titanium oxide nanoparticles/graphene oxide (TiO₂/GO) composites, which demonstrate excellent sensing capabilities compared to pure GO-based sensors. The multilayer structure of the TiO₂/GO composites enables the enhanced adsorption of water molecules and improved dynamic properties while providing dual-mode sensing capability through both resistive and capacitive measurements. Sensors with different TiO₂/GO ratios were systematically investigated to optimize performance over different humidity ranges. The TiO₂/GO sensor achieved remarkable sensitivity (8.66 × 10⁴ Ω/%RH), a fast response time (0.61 s), and fast recovery (0.87 s) with minimal hysteresis (4.09%). In particular, the sensors demonstrated excellent mechanical stability, maintaining reliable performance under bending conditions, together with excellent cyclic stability and long-term durability. Temperature dependence studies showed consistent performance under controlled temperature conditions, with the potential for temperature-compensated measurements. These results highlight TiO₂/GO nanocomposites as promising candidates for next-generation humidity sensing applications, offering enhanced sensitivity, mechanical flexibility, and operational stability. The dual-mode sensing capability combined with mechanical durability opens up new possibilities for flexible and wearable humidity-sensing devices. Full article

This study investigates the enhancement of organic light-emitting diode (OLED) performance through the integration of titanium dioxide (TiO₂) nanocomposites within a poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) matrix. The nanocomposite films were prepared using a controlled dispersion of TiO₂ belts into the PEDOT/PSS solution, followed by their incorporation into the OLED hole-injection layer (HIL). Our results demonstrate a significant improvement in device efficiency, attributed to the optimized charge carrier mobility and reduced recombination losses, which were achieved by the presence of TiO₂. The nanocomposite hybrid layer enhances light emission efficiency due to its role in modifying surface roughness, promoting better film uniformity, and improving hole injection. The incorporation of TiO₂ nanobelts into PEDOT/PSS led to significant efficiency enhancements, yielding a 39% increase in PE_max, a 37% improvement in CE_max, and a remarkable 72% rise in EQE_max compared to the undoped counterpart. This research provides insight into the potential of TiO₂ nanocomposites in advancing OLED technology for next-generation display and lighting applications. Full article