Search Results (18)

Hainan Island is the only large island located on the northern margin of the South China Sea and is surrounded by Cenozoic graben basins, including the Qiongdongnan, Yinggehai, and Beibuwan basins. The uplift and denudation history of the Jianfeng pluton on southwestern Hainan Island is significant for understanding the formation of the regional geomorphology and adjacent basin evolution. This paper presents apatite and zircon fission-track (FT) analyses conducted on the Jianfeng pluton. The zircon FT (ZFT) ages of the pluton range are from 63 ± 4 to 108 ± 8 Ma, and the apatite FT (AFT) ages are from 19.4 ± 1.8 to 43.9 ± 4.4 Ma. The average confined track lengths in apatite are relatively short (11.9–12.8 μm). An age–elevation plot indicates that two rapid cooling events occurred during 73–63 and 44–40 Ma. Thermal modeling revealed four stages of 73–63 Ma, 44–40 Ma, 40–11 Ma, and 11–0 Ma. From the Late Cretaceous to the middle Eocene (73–40 Ma), the Jianfeng area underwent episodic rapid uplift and denudation. At the end of the Late Cretaceous (73–63 Ma), the area was affected by mid-ocean ridge spreading in the Proto-South China Sea. During the middle Eocene (44–40 Ma), the Yinggehai Basin underwent abrupt expansion and subsidence, which increased the elevation difference between the Jianfeng area and the Yinggehai Basin. From the middle Eocene to the middle Miocene (40–11 Ma), the Jianfeng area underwent slow denudation, and the Yinggehai Basin was rapidly infilled, which eliminated the original elevation difference between the two areas. From the middle Miocene to the present (11–0 Ma), the Jianfeng area has undergone reactivated rapid uplift and denudation, which was driven by the remote effects of the India–Eurasia collision. Full article

The granitoids of the Kalba–Narym batholith and the Irtysh shear zone (ISZ) are among the main geological features of the late Paleozoic Altai accretion–collision system (AACS) in Eastern Kazakhstan. Traditionally, it is believed that late Paleozoic strike-slip faults played a pivotal role at all stages of the development of the AACS, they were supposed to control deformation, magmatism, and ore deposits. This work is devoted to solving the problem of the tectonic evolution of the AACS based on the reconstruction of the thermal history of granitoids of the Kalba–Narym batholith in connection with the Chechek metamorphic dome structure, which is one of the highly metamorphosed blocks mapped within the ISZ. The new geological and geochronological data presented in this work allowed us to establish the sequence of formation of the Kalba–Narym granitoid batholith and link it with the evolution of the Irtysh shear zone (ISZ). It was revealed that in the late Carboniferous–early Permian (312–289 Ma), during the NE–SW compression, the Irtysh shear zone formed as a gently dipping thrust system into which gabbro of the Surov massif intruded. The combined manifestation of magmatic and tectonic processes caused the formation of tectonic mélange with cataclastic gabbro and metamorphic rocks of the Chechek metamorphic dome structure (312–289 Ma). Compression caused the formation of a cover-thrust structure. The thickening of the crust under the probable thermal action of the Tarim plume led to the formation of the early Permian Kalba–Narym batholith (297–284 Ma) within the Kalba–Narym terrane. Denudation of the orogen occurred before the Early Triassic (280–229 Ma). In this way the sequence of formation of the Kalba–Narym batholith and the ISZ is consistent with the concepts of the stages of plume-lithosphere interaction within the AACS under the influence of the late Carboniferous–early Permian Tarim igneous province, but in the cover-thrust tectonic setting. Full article

The pre-Jurassic in the north depression of the Tuha depression is the most favorable replacement strata to obtain new reserves in the Turpan–Hami Basin. (Pre-Jurassic, in this paper, refers to the Permian and Triassic.) The main source rocks are the Taodonggou Group, of which the burial history and hydrocarbon generation potential remain unconfirmed. The investigation of the burial and thermal history is vital for the basin analysis and hydrocarbon exploration. Therefore, in this paper, by using the acoustic time difference method, vitrinite reflectance method, stratigraphic trend method and PetroMod-1D software, the differential characteristics of denudation thickness, burial history and thermal evolution history of different tectonic units in different periods of Taibei Sag in the Turpan–Hami basin are studied, and their influence on the petroleum system is analyzed, and then the zones with exploration potential are optimized. The results show that the Taibei Sag has experienced multiple tectonic uplift events. The Late Indosinian movement has profound effects on the Taodonggou Group source rocks. The rather large uplift amplitude postpones the maturation of source rocks. In addition, the Turpan–Hami Basin is a typical cold basin. Therefore, the thermal maturity of the source rocks is relatively low, with respect to the relatively deep burial. The thermal histories of the different sub-sags in the study area are slightly differentiated from each other. The Taodonggou Group source rocks in the Taibei Sag generally became mature during the Mid–Late Jurassic epoch, except for those in the Central–Southern Shanbei sub-sag, represented by Well LT-1, which reached the mature stage during the Late Triassic epoch. The study area has well-developed reservoir rocks, and effective reservoir bodies are formed in the slope zone and near the Tainan Sag, due to the higher porosity and permeability of reservoir rocks. The statistics related to the faults and an analysis of the structural styles of oil reservoirs indicate that the structural slope and anticline of the Huobei, Lianbei and Shanbei sub-sags are favorable for increasing reserves and production of hydrocarbons. Full article

A reconstruction of the tectonothermal evolution of the Laojunshan–Song Chai granite gneiss massif (North Vietnam, South China) was carried out, based on summaries of the latest isotopic and fission-track dating results. The recorded wide range (420–465 Ma) of the age of granite gneiss rocks testifies to the long-term existence of a partially molten layer at a depth of 20–30 km for several tens of Ma. By the Devonian–early Carboniferous, a section of the excessively thickened crust was denudated, the massif was exhumated to the level of the upper crust, and isotope systems were “frozen”. The rate of uplift of the rocks of the massif is estimated to be about 0.2–0.5 mm/year. In the further history of the granite gneiss massif, episodes of repeated burial to a depth of about 13 km are recorded, associated with the Indosinian collision. The rocks have experienced metamorphism of the amphibolite-green schist facies, accompanied by tectonic transport in the form of a thrust sheet. Over the next 200 Ma, the uplift of the massif and the erosion of the overlying strata occurred in discrete pulses, during a sequence of active tectonic events. Thus, the thermochronological and P-T history of the Laojunshan–Song Chai massif is a kind of chronicle of regional tectonic–thermal events. In the history of the massif, traces of two orogenic cycles associated with the collision of the Cathaysia and Yangtze blocks in the Lower Paleozoic and the Indosinian collision in the Triassic are recorded. Full article

Hypersonic vehicles encounter hostile service environments of thermal/mechanical/chemical coupling, so thermal protection materials are crucial and essential. Ceramizable composites have recently attracted intensive interest due to their ability to provide large-area thermal protection for hypersonic vehicles. In this work, a novel ceramizable composite of quartz fiber/benzoxazine resin modified with fused SiO₂ and h-BN was fabricated using a prepreg compression molding technique. The effects of the fused SiO₂ and h-BN contents on the thermal, mechanical, and ablative properties of the ceramizable composite were systematically investigated. The ceramizable composite with an optimized amount of fused SiO₂ and h-BN exhibited superb thermal stability, with a peak degradation temperature and residue yield at 1400 °C of 533.2 °C and 71.5%, respectively. Moreover, the modified ceramizable composite exhibited excellent load-bearing capacity with a flexural strength of 402.2 MPa and superior ablation resistance with a linear ablation rate of 0.0147 mm/s at a heat flux of 4.2 MW/m², which was significantly better than the pristine quartz fiber/benzoxazine resin composite. In addition, possible ablation mechanisms were revealed based on the microstructure analysis, phase transformation, chemical bonding states, and the degree of graphitization of the ceramized products. The readily oxidized pyrolytic carbon (PyC) and the SiO₂ with a relatively low melting point were converted in situ into refractory carbide. Thus, a robust thermal protective barrier with SiC as the skeleton and borosilicate glass as the matrix protected the composite from severe thermochemical erosion and thermomechanical denudation. Full article

Rapid slope instabilities (i.e., rockfalls) involving highway networks in mountainous areas pose a threat to facilities, settlements and life, thus representing a challenge for asset management plans. To identify different morphological expressions of degradation processes that lead to rock mass destabilization, we combined satellite and uncrewed aircraft system (UAS)-based products over two study sites along the State Highway 133 sector near Paonia Reservoir, Colorado (USA). Along with a PS-InSAR analysis covering the 2017–2021 interval, a high-resolution dataset composed of optical, thermal and multi-spectral imagery was systematically acquired during two UAS surveys in September 2021 and June 2022. After a pre-processing step including georeferencing and orthorectification, the final products were processed through object-based multispectral classification and change detection analysis for highlighting moisture or lithological variations and for identifying areas more susceptible to deterioration and detachments at the small and micro-scale. The PS-InSAR analysis, on the other hand, provided multi-temporal information at the catchment scale and assisted in understanding the large-scale morpho-evolution of the displacements. This synergic combination offered a multiscale perspective of the superimposed imprints of denudation and mass-wasting processes occurring on the study site, leading to the detection of evidence and/or early precursors of rock collapses, and effectively supporting asset management maintenance practices. Full article

The Laptev Sea coast has a unique high-latitude and dynamic landscape. The presence of low-temperature permafrost (below −7 °C) and its high ice content (up to 90%) determine a wide array of permafrost landforms and features. Under the actions of thermal abrasion and thermal denudation, high rates of coastal retreat are evident within this region. Local differences in the geological structure and sea hydrodynamic conditions determine the diversity of this sea coast’s types. In this review, we present the results of a morphodynamic classification and segmentation of the Laptev Sea coast. The integrated approach used in the classification took into account the leading relief-forming processes that act upon this coastal zone. The research scale of 1:100,000 made it possible to identify and characterize the morphologies of the coast and their spatial distributions within the study area. The presented original classification can be considered to be universal for the eastern Arctic seas of Eurasia; it may be used as a basis for further scientific and applied research. Full article

Exploring for hydrocarbons in a pyroclastic-affected reservoir is an important research topic. Previous studies have mainly focused on laminated pyroclastic. A large number of dispersed pyroclastic is present in sedimentary rocks, and dispersed volcanic ash strongly influences the diagenetic evolution of sandstone reservoirs. However, these aspects remain understudied. We studied the mechanism of the diagenetic evolution of the Jurassic tuffaceous sandstone reservoir in Qikou Sag of the Bohai Bay Basin by performing inclusion temperature measurements, rock slice identification, and scanning electron microscopy, and using electron microprobes and microzone isotopes. We determined the mechanism of water-rock interaction. Based on microscopic observations, we determined that the main diagenesis included two-stage dolomite cementation, two-stage calcite cementation, quartz cementation, and transformation and dissolution of clay minerals. The hydrolysis and chemical transformation of pyroclastic during burial not only provided an alkaline environment in the early stage of diagenesis but also supplied ions for the formation of microcrystalline quartz and early dolomite and the transformation of clay minerals. Leaching and denudation generated early dissolution caused by a tectonic uplift. Following the epigenetic stage, microbial activity stimulated the formation of early calcite during the shallow burial stage. When the burial temperature of the stratum was 80 °C, the acidic fluid discharged from the thermal evolution of organic matter was neutralized by the soluble components in the pyroclastic, which prevented the formation of a large-scale acidic environment. When the burial temperature exceeded 100 °C, the acidic fluid generated by thermal catalytic decarboxylation of organic matter formed a large quantity of dissolution. The dissolution of plagioclase promoted the overgrowth of quartz and the growth of kaolinite. Full article

In this work, numerical simulation and experimental research were carried out on ablation mechanism of the first pulse (I pulse) insulation layer in a double-pulse solid rocket motor (SRM). Firstly, based on the internal thermal environment of the typical double pulse SRM, the internal flow field in combustion chamber of the double-pulse SRM with soft type pulse separation device (PSD) under the second pulse (Ⅱ pulse) working condition was numerically simulated. The results showed that the main reason for the difference of ablation in I pulse insulation layer was the difference of gas phase velocity. Secondly, based on the simulation analysis results, the experimental system for ablation of insulation layer was developed, and the ablation performance experiments under two gas phase velocities were carried out. It was found that a brittle carbonized layer had been formed on the surface of the insulation layer after the completion of I pulse work. In addition, at the beginning of Ⅱ pulse work, the suddenly generated gas flow made a denudation effect on the carbonized layer, which consumed a part of the carbonized layer. After the carbonized layer was peeled off, the gas flow continued to ablate the matrix of the insulation layer. Finally, the simulation analysis of the ablation process of the insulation layer under two gas phase velocities was carried out. The results showed that the velocity of the fuel gas is the main factor affecting the ablation rate of the insulation layer, which was consistent with the experimental results. It is proven that the model can be used to estimate the ablation amount of insulation of solid rocket motor. The conclusion can provide a significant reference for the internal heat protection design of the double-pulse SRM. Full article

Black (EBC) and Brown (BrC) Carbon are ubiquitous constituents of atmospheric particulate matter that affect people’s health, disrupt ecosystems, and modulate local and global climate. Tracking the local deposition and sources of these aerosol particles is essential to better understanding their multidimensional environmental impact. The main goal of the current study is to measure the absorption coefficient (Babs) of particles within the Planetary Boundary Layer (PBL) of the El Paso (US)–Ciudad Juárez (Mexico) airshed and assess the contribution of black and brown carbon particles to the optical absorption. Measurements were taken during a summer, wildfire, and winter season to evaluate the optical properties of BC and non-volatile BrC. The winter season presented a variation from the background Babs in the late evening hours (3:00 PM to midnight) due to an increase in biomass burning driven by lower temperatures. The wildfire season presents the greatest variation in the Babs from the background absorption due to EBC- and BrC-rich smoke plumes arriving at this region from the US West seasonal wildfires. It was found that the international bridges’ vehicular traffic, waiting time to cross back and forth between both cities, added to other local anthropogenic activities, such as brick kiln emissions in Ciudad Juarez, have created a background of air pollution in this region. These pollutants include carbon monoxide, sulfur dioxide, nitrogen and nitric oxides, coarse and fine particulate matter dominated by BC and BrC. The absorption coefficients due to EBC and BrC of this background constitute what we have called a baseline EBC and BrC. Aided by two photoacoustic Extinctiometers (PAX), operating at 405 nm and 870 nm wavelengths, connected to a 340 °C thermal denuder to remove volatile organics, the optical properties were documented and evaluated to identify the impact of long-range transported emissions from western wildfires. The Single Scattering Albedo and the Absorption Ångstrom exponent were calculated for the winter and summer season. The Angstrom exponent showed a decrease during the wildfire events due to the aging process. The High-Resolution Rapid Refresh Smoke model, HRRR, and the Hybrid Single-Particle Lagrangian Integrated Trajectory model, HYSPLIT, were used to estimate the sources of the particles. In addition, a Vaisala Ceilometer was employed to study the vertical profile of particulate matter within the planetary boundary layer. Full article

The uplift and denudation history of the orogenic belt and the basin–mountain coupling process have directly or indirectly affected the generation, scale, and preservation of sandstone-type uranium deposits in the eastern Junggar Basin by controlling the uranium source, lithology, facies, hydrogeology, post-generation modification, and other mineralization conditions. Taking the eastern Junggar Basin as the research area, this study proposes the constraints on sandstone-type uranium deposits by the tectonic uplift and denudation history of the orogenic belt in the basin using the apatite fission track (AFT), detrital zircon geochronology, and other methods. The results of the AFT age test and thermal path simulation indicate that the orogenic belt in the eastern Junggar Basin underwent four rapid uplifts; (from approximately 300 Ma to approximately 250 Ma, from approximately 130 Ma to approximately 90 Ma, from approximately 65 Ma to approximately 30 Ma, and from approximately 20 Ma to 0 Ma). Moreover, the timing of the uplift has a spatial trend of gradually becoming younger from south to north. The detrital zircon U-Pb age test showed that the sediment source area of the basin is mainly distributed in three age intervals, i.e., 460–390, 360–270, and 190–170 Ma. The comprehensive evaluation of the clastic sediment composition, stratigraphic distribution of the erosion source area, and thermal history showed that a large amount of exposed Carboniferous–Permian granites in the Qinglidi and Karameri Mountain erosion source areas contributed dominant sediment material and uranium sources for the Triassic and Middle and Lower Jurassic strata in the basin. The Ordovician–Early Devonian granites only provided sediment sources for the Upper Triassic and Lower Jurassic strata in the basin. Altay Mountain contributed some sediment sources for the Middle and Upper Jurassic strata after the magmatic activity and rapid uplift occurred in the Middle Jurassic. Based on the comprehensive analysis of the influence of the tectonic uplift process of the orogenic belt and the transformation of material source areas on uranium mineralization, the granites in the erosion source areas are proposed to contribute both external and internal uranium sources for uranium mineralization. Uranium mineralization mainly occurred in the tectonic retreat period after the rapid uplifts of the Cretaceous and Paleogene. It was terminated by the intensive uplift-induced stratigraphic deformation in the Miocene. Full article

Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) is classically used in U-Pb dating to measure U and Pb isotopic concentrations. Recently, it has become frequently used in fission-track (FT) chronometry too. As an advantage, the U-Pb and FT double dating will enable efficiently determining the crystallization ages and the thermo-tectonic history concurrently as samples volume, analytical time, efforts, and cost will be greatly reduced. To demonstrate the validity of this approach, a Younger granite (Ediacaran age) sample from North Eastern Desert (NED), Egypt was analyzed for U-Pb and FT double dating. The integration of multiple geochronologic data yielded a zircon U-Pb crystallization age of 599 ± 30 Ma, after emplacement, the rock cooled /uplifted rapidly to depths of 9–14 km as response to the post-Pan African Orogeny erosional event as indicated by apatite U-Pb age of 474 ± 9 Ma. Afterwards, the area experienced a slow cooling/exhumation for a short period, most-likely as response to denudation effect. During the Devonian, the area was rapidly exhumed to reach depths of 1.5–3 km as response to the Hercynian tectonic event, as indicated by a zircon FT age of 347 ± 16 Ma. Then the studied sample has experienced a relatively long period of thermal stability between the Carboniferous and the Eocene. During the Oligocene-Miocene, the Gulf of Suez opening event affected the area by crustal uplift to its current elevation. This integration of Orogenic and thermo-tectonic information reveals the validity, efficiency, and importance of double dating of U-Pb and FT techniques using LA-ICP-MS methodology. Full article

The Zhuguangshan complex hosts the main uranium production area in South China. We report (U-Th)/He and fission track thermochronological data from Triassic–Jurassic mineralized and non-mineralized granites and overlying Cambrian and Cretaceous sandstone units from the Lujing uranium ore field (LUOF) to constrain the upper crustal tectono-thermal evolution of the central Zhuguangshan complex. Two Cambrian sandstones yield reproducible zircon (U-Th)/He (ZHe) ages of 133–106 Ma and low effective uranium (eU) content (270–776 ppm). One Upper Cretaceous sandstone and seven Mesozoic granites are characterized by significant variability in ZHe ages (154–83 Ma and 167–36 Ma, respectively), which show a negative relationship with eU content (244–1098 ppm and 402–4615 ppm), suggesting that the observed age dispersion can be attributed to the effect of radiation damage accumulation on ⁴He diffusion. Correspondence between ZHe ages from sandstones and granites indicates that surrounding sedimentary rocks and igneous intrusions supplied sediment to the Cretaceous–Paleogene Fengzhou Basin lying adjacent to the LUOF. The concordance of apatite fission track (AFT) central ages (61–54 Ma) and unimodal distributions of confined track lengths of five samples from different rock units suggest that both sandstone and granite samples experienced a similar cooling history throughout the entire apatite partial annealing zone (~110–60 °C). Apatite (U-Th-Sm)/He (AHe) ages from six non-mineralized samples range from 67 to 19 Ma, with no apparent correlation to eU content (2–78 ppm). Thermal history modeling of data suggests that the LUOF experienced relatively rapid Early Cretaceous cooling. In most samples, this was followed by the latest Early Cretaceous–Late Cretaceous reheating and subsequent latest Late Cretaceous–Recent cooling to surface temperatures. This history is considered as a response to the transmission of far-field stresses, involving alternating periods of regional compression and extension, related to paleo-Pacific plate subduction and subsequent rollback followed by Late Paleogene–Recent India–Asia collision and associated uplift and eastward extrusion of the Tibetan Plateau. Thermal history models are consistent with the Fengzhou Basin having been significantly more extensive in the Late Cretaceous–Early Paleogene, covering much of the LUOF. Uranium ore bodies which may have formed prior to the Late Cretaceous may have been eroded by as much as ~1.2 to 4.8 km during the latest Late Cretaceous–Recent denudation. Full article

This review focuses on providing the history of measurement efforts to quantify and characterize the compounds of reactive mercury (RM), and the current status of measurement methods and knowledge. RM collectively represents gaseous oxidized mercury (GOM) and that bound to particles. The presence of RM was first recognized through measurement of coal-fired power plant emissions. Once discovered, researchers focused on developing methods for measuring RM in ambient air. First, tubular KCl-coated denuders were used for stack gas measurements, followed by mist chambers and annular denuders for ambient air measurements. For ~15 years, thermal desorption of an annular KCl denuder in the Tekran^® speciation system was thought to be the gold standard for ambient GOM measurements. Research over the past ~10 years has shown that the KCl denuder does not collect GOM compounds with equal efficiency, and there are interferences with collection. Using a membrane-based system and an automated system—the Detector for Oxidized mercury System (DOHGS)—concentrations measured with the KCl denuder in the Tekran speciation system underestimate GOM concentrations by 1.3 to 13 times. Using nylon membranes it has been demonstrated that GOM/RM chemistry varies across space and time, and that this depends on the oxidant chemistry of the air. Future work should focus on development of better surfaces for collecting GOM/RM compounds, analytical methods to characterize GOM/RM chemistry, and high-resolution, calibrated measurement systems. Full article

For a long time, the thermal history of northeastern (NE) Fennoscandia in the Phanerozoic and Precambrian remained unknown, since no thermochronological studies were carried out within the Kola Peninsula area. Two years ago, we developed the first model of tectono-thermal evolution of the Kola Peninsula territory for the last 1.9 Gyr using a set of newly obtained apatite fission-track (AFT) and Ar/Ar thermochronological data. However, the low-temperature history of the most ancient tectonic unit of the northeastern part of the Kola Peninsula—the Archean Murmansk craton—remained poorly constrained due to the lack of AFT data. In this paper, we present the first results of AFT studies of 14 samples representing intrusive and metamorphic Precambrian rocks, located within the Murmansk craton of NE Fennoscandia. AFT ages and track length distributions indicate a similar tectono-thermal evolution of Precambrian tectonic units in NE Fennoscandia over the last 300 Myr. The AFT ages are distributed between ca. 177 and ca. 384 Ma; their median value, ~293 Ma, confirms the presence of a previously identified hidden thermal event that took place at about 300 Ma. However, a detailed analysis of the AFT age distribution shows the presence of three statistically distinguishable age components: 180–190 Ma (C1), 290–320 Ma (C2) and 422 Ma (C3). We assume that the relatively young AFT ages of C1 may originate from apatite crystals with low thermal resistivity. Remarkably, this value coincides with the initial stage of the Barents Sea magmatic province activity during large-scale plume-lithospheric interaction, as well as with the assumed age of an enigmatic remagnetization event throughout the Kola Peninsula. C2 ages can be observed in both the gabbroic and non-gabbroic samples, whereas C3 ages can only be found in gabbro. It is supposed that C2 ages, similarly to the Central Kola terrane, correspond to a cooling event related to the denudation of a thick sedimentary cover, representing a continuation of the Caledonian foreland basin towards NE Fennoscandia. C3 ages may be associated with a thermal event corresponding to the Caledonian collisional orogeny. Full article