Search Results (67)

Shape memory polymer composites (SMPCs) are an intelligent class of materials capable of self-actuation, offering promising applications in diverse stimuli-responsive material systems. This study developed epoxy-based SMPCs reinforced with carbon–aramid fibers at a 15:85 ratio, with their glass transition temperature (T_g) tailored by incorporating 5 wt.% (SMPC-5) and 10 wt.% (SMPC-10) polyethylene glycol (PEG-600). Dynamic mechanical analysis (DMA) confirmed that PEG addition effectively reduced the T_g from 89.79 °C in the neat composite (SMPC-P) to 70.28 °C in SMPC-5 and 59.34 °C in SMPC-10. Incorporating 5 wt.% PEG enhanced storage and loss moduli, whereas excessive plasticization at 10 wt.% reduced stiffness. Infrared spectroscopy analysis revealed shifts and increased intensities in hydroxyl (OH), aliphatic C-H, and carbonyl (C=O) groups, indicating enhanced intermolecular interactions and bond formation. Tensile testing showed that the carbon–aramid filler significantly improved tensile strength and stiffness, with SMPC-10 achieving the highest tensile strength (233.59 MPa) and SMPC-5 the highest Young’s modulus (14.081 GPa). These results highlight the complementary role of carbon–aramid reinforcement and PEG plasticization in tuning thermomechanical behavior, providing baseline insights for designing SMPCs with tailored actuation and reliable structural performance. Full article

This study presents a novel strategy for designing photocurable resins tailored for the additive manufacturing of smart thermoset materials. A quaternary formulation was developed by integrating bis(2-methacryloyl)oxyethyl disulfide (DADS) with an epoxy/thiol-ene system (ETES) composed of diglycidyl ether of bisphenol A (EP), pentaerythritol tetrakis(3-mercaptopropionate) (PTMP), and 4,4′-methylenebis(N,N-diallylaniline) (ACA4). This unique combination enables the simultaneous activation of four polymerization mechanisms: radical photopolymerization, thiol-ene coupling, thiol-Michael addition, and anionic ring-opening, within a single resin matrix. A key innovation lies in the exothermic nature of DADS photopolymerization, which initiates and sustains ETES curing at room temperature, enabling 3D printing without thermal assistance. This represents a significant advancement over conventional systems that require elevated temperatures or post-curing steps. The resulting hybrid poly(acrylate–co-ether–co-thioether) network exhibits enhanced mechanical integrity, shape memory behavior, and intrinsic self-healing capabilities. Dynamic Mechanical Analysis revealed a shape fixity and recovery of 93%, while self-healing tests demonstrated a 94% recovery of viscoelastic properties, as evidenced by near-overlapping storage modulus curves compared to a reference sample. This integrated approach broadens the design space for multifunctional photopolymers and establishes a versatile platform for advanced applications in soft robotics, biomedical devices, and sustainable manufacturing. Full article

Thiol–epoxy photopolymerization offers exceptional advantages for high-performance protective coatings, yet efficiently curing thick formulations remains a significant challenge due to the limited penetration depth of conventional UV light. Herein, we report a novel near-infrared (NIR) light-activated photopolymerization system for deep-curing applications, strategically integrating upconversion nanoparticles (UCNPs) as NIR-to-UV converters, isopropylthioxanthone (ITX) as a photosensitizer, and a liquid N-phenylglycine-based photobase generator (NPG-TBD) with enhanced resin solubility. Upon 980 nm NIR irradiation, photogenerated TBD efficiently catalyzes thiol–epoxy polymerization through an anionic mechanism, enabling uniform network formation with epoxy and thiol functional group conversions greater than 90% throughout samples exceeding 2.5 cm in thickness. The resulting coatings exhibit excellent mechanical properties including 3H pencil hardness, strong adhesion (0 grade), and good flexibility (2 mm), significantly outperforming conventional UV systems limited to approximately 1.5 mm. Additionally, the cured materials demonstrate multifunctional characteristics including distinctive upconversion luminescence and dual-responsive shape memory behavior. This approach addresses critical limitations in deep-photocuring technology while offering significant potential for applications in protective coatings for marine infrastructure, chemical storage facilities, and smart materials requiring both substantial barrier properties and programmable responsiveness. Full article

Interpenetrating polymer networks (IPNs) are widely used as damping materials across various industries. However, they are susceptible to issues such as microcracking or fracture over long-term service periods. To address these challenges and improve the long-term performance of IPNs, this research focused on designing and synthesizing self-healing polyurethane (PU)/epoxy (EP) interpenetrating networks (PU/EP-IPNs) enhanced with dynamic disulfide bonds. The incorporation of these bonds significantly enhanced the damping and self-healing properties of the materials. The shape memory performance was evaluated, demonstrating high shape fixation rates of up to 95.0% and exceptional shape recovery rates of up to 99.7%. These results indicate the materials’ ability to revert to their original shape upon heating above the glass transition temperature (T_g). In addition, the effective damping temperature range of the material reached 61.4 °C, and the loss factor was 0.859. This indicates that the enhancement of damping performance is closely related to the increase in disulfide bond density. The formation of the IPN between PU and EP also contributed to improved mechanical and thermomechanical properties. These PU/EP-IPNs exhibit significant potential as innovative damping materials with self-healing capabilities. Full article

Using 3D-printed (3DPd) polymers and their composites as shape memory materials in various smart engineering applications has raised the demand for such functionally graded sustainable materials. This study aims to investigate the viscoelastic, shape memory, and fracture toughness properties of the epoxy-based ultraviolet (UV)-curable resin. A UV-based DLP (Digital Light Processing) printer was employed for the 3D printing (3DPg) epoxy-based structures. The effect of the hydrothermal accelerated ageing on the various properties of the 3DPd components was examined. The viscoelastic performance in terms of glass transition temperature (T_g), storage modulus, and loss modulus was evaluated. The shape memory polymer (SMP) performance with respect to shape recovery and shape fixity (programming the shape) were calculated through dynamic mechanical thermal analysis (DMTA). DMTA is used to reveal the molecular mobility performance through three different regions, i.e., glass region, glass transition region, and rubbery region. The shape-changing region (within the glass transition region) between the T_g value from the loss modulus and the T_g value from the tan(δ) was analysed. The temperature memory behaviour was investigated for flat and circular 3DPd structures to achieve sequential deployment. The critical stress intensity factor values of the single-edge notch bending (SENB) specimens have been explored for different crack inclination angles to investigate mode I (opening) and mixed-mode I/III (opening and tearing) fracture toughness. This study can contribute to the development of highly complex shape memory 3DPd structures that can be reshaped several times with large deformation. Full article

The development of epoxy resins is mainly dependent on non-renewable petroleum resources, commonly diglycidyl ether bisphenol A (DGEBA)-type epoxy monomers. Most raw materials of these thermoset resins are toxic to the health of human beings. To alleviate concerns about the environment and health, the design and synthesis of bio-based epoxy resins using biomass as raw materials have been widely studied in recent decades to replace petroleum-based epoxy resins. With the improvement in the requirements for the performance of bio-based epoxy resins, the design of bio-based epoxy resins with unique functions has attracted a lot of attention, and bio-based epoxy resins with flame-retardant, recyclable/degradable/reprocessable, antibacterial, and other functional bio-based epoxy resins have been developed to expand the applications of epoxy resins and improve their competitiveness. This review summarizes the research progress of functional bio-based epoxy resins in recent years. First, bio-based epoxy resins were classified according to their unique function, and synthesis strategies of functional bio-based epoxy resins were discussed, then the relationship between structure and performance was revealed to guide the synthesis of functional bio-based epoxy resins and stimulate the development of more types of functional bio-based epoxy resins. Finally, the challenges and opportunities in the development of functional bio-based epoxy resins are presented. Full article

This study focuses on enhancing the thermal properties and shape recovery performance of shape memory polymers (SMPs) through the application of carbon-based fillers. Single and mixed fillers were used to investigate their effects on the glass transition temperature (T_g), thermal conductivity, and shape recovery performance. The interaction among the three-dimensional (3D) structures of mixed fillers played a crucial role in enhancing the properties of the SMP. These interactions facilitated efficient heat transfer pathways and conserved strain energy. The application of mixed fillers resulted in substantial improvements, demonstrating a remarkable 290.37% increase in thermal conductivity for SMPCs containing 60 μm carbon fiber (CF) 10 wt% + graphite 20 wt% and a 60.99% reduction in shape recovery time for SMPCs containing CF 2.5 wt% + graphite 2.5 wt%. At a content of 15 wt%, a higher graphite content compared to CF improved the thermal conductivity by 37.42% and reduced the shape recovery time by 6.98%. The findings demonstrate that the application of mixed fillers, especially those with high graphite content, is effective in improving the thermal properties and shape recovery performance of SMPs. By using mixed fillers with high graphite content, the performance of the SMP showed significant improvement in situations where fast response times were required. Full article

Being a bio-sourced and biodegradable polymer, polylactic acid (PLA) has been considered as one of the most promising substitutes for petroleum-based plastics. However, its wide application is greatly limited by its very poor ductility, which has driven PLA-toughening modifications to be a topic of increasing research interest in the past decade. Toughening enhancement is achieved often at the cost of a large sacrifice in strength, with the toughness–strength trade-off having remained as one of the main bottlenecks of PLA modification. In the present study, a bio-elastomeric material of epoxidized soybean oil (ESO) crosslinked with sebacic acid (SA) and enhanced by graphene oxide (GO) nanoparticles (NPs) was employed to toughen PLA with the purpose of simultaneously preserving strength and achieving additional functions. The even dispersion of GO NPs in ESO was aided by ultrasonication and guaranteed during the following ESO-SA crosslinking with GO participating in the carboxyl–epoxy reaction with both ESO and SA, resulting in a nanoparticle-enhanced and dynamically crosslinked elastomer (GESO) via a β-hydroxy ester. GESO was then melt-blended with PLA, with the interfacial reaction between ESO and PLA offering good compatibility. The blend morphology, and thermal and mechanical properties, etc., were evaluated and GESO was found to significantly toughen PLA while preserving its strength, with the GO loading optimized at ~0.67 wt%, which gave an elongation at break of ~274.5% and impact strength of ~10.2 kJ/m², being 31 times and 2.5 times higher than pure PLA, respectively. Moreover, thanks to the presence of dynamic crosslinks and GO NPs, the PLA-GESO blends exhibited excellent shape memory effect and antistatic properties. Full article

In pursuit of enhancing the mechanical properties, especially the tensile strength, of 4D-printable consumables derived from waste cooking oil (WCO), we initiated the production of acrylate-modified WCO, which encompasses epoxy waste oil methacrylate (EWOMA) and epoxy waste oil acrylate (EWOA). Subsequently, a series of WCO-based 4D-printable photocurable resins were obtained by introducing a suitable diacrylate molecule as the second monomer, coupled with a composite photoinitiator system comprising Irgacure 819 and p-dimethylaminobenzaldehyde (DMAB). These materials were amenable to molding using an LCD light-curing 3D printer. Our findings underscored the pivotal role of triethylene glycol dimethacrylate (TEGDMA) among the array of diacrylate molecules in enhancing the mechanical properties of WCO-based 4D-printable resins. Notably, the 4D-printable material, composed of EWOA and TEGDMA in an equal mass ratio, exhibited nice mechanical strength comparable to that of mainstream petroleum-based 4D-printable materials, boasting a tensile strength of 9.17 MPa and an elongation at break of 15.39%. These figures significantly outperformed the mechanical characteristics of pure EWOA or TEGDMA resins. Furthermore, the EWOA-TEGDMA resin demonstrated impressive thermally induced shape memory performance, enabling deformation and recovery at room temperature and retaining its shape at −60 °C. This resin also demonstrated favorable biodegradability, with an 8.34% weight loss after 45 days of soil degradation. As a result, this 4D-printable photocurable resin derived from WCO holds immense potential for the creation of a wide spectrum of high-performance intelligent devices, brackets, mold, folding structures, and personalized products. Full article

The present study focuses on the multifunctional capabilities of carbon nanotube (CNT)-reinforced vitrimers. More specifically, the thermomechanical properties, the Joule effect heating capabilities, the electrical conductivity, the shape memory, and the chemical recycling capacity are explored as a function of the CNT content and the NH₂/epoxy ratio. It is observed that the electrical conductivity increases with the CNT content due to a higher number of electrical pathways, while the effect of the NH₂/epoxy ratio is not as prevalent. Moreover, the T_g of the material decreases when increasing the NH₂/epoxy ratio due to the lower cross-link density, whereas the effect of the CNTs is more complex, in some cases promoting a steric hindrance. The results of Joule heating tests prove the suitability of the proposed materials for resistive heating, reaching average temperatures above 200 °C when applying 100 V for the most electrically conductive samples. Shape memory behavior shows an outstanding shape fixity ratio in every case (around 100%) and a higher shape recovery ratio (95% for the best-tested condition) when decreasing the NH₂/epoxy ratio and increasing the CNT content, as both hinder the rearrangement of the dynamic bonds. Finally, the results of the recyclability tests show the ability to regain the nanoreinforcement for their further use. Therefore, from a multifunctional analysis, it can be stated that the proposed materials present promising properties for a wide range of applications, such as Anti-icing and De-icing Systems (ADIS), Joule heating devices for comfort or thermotherapy, or self-deployable structures, among others. Full article

Bio-based vitrimers present a promising solution to the issues associated with non-renewable and non-recyclable attributes of traditional thermosetting resins, showcasing extensive potential for diverse applications. However, their broader adoption has been hindered by the requirement for catalyst inclusion during the synthesis process. In this study, a cardanol-based curing agent with poly-hydroxy and tertiary amine structures was prepared by a clean synthetic method under the theory of click chemistry. The reaction of a cardanol-based curing agent with diglycidyl ether of bisphenol A formed catalyst-free, self-healing, and recyclable bio-based vitrimers. The poly-hydroxy and tertiary amine structures in the vitrimers promoted the curing of epoxy-carboxylic acid in the cross-linked network and served as internal catalysts of dynamic transesterification. In the absence of catalysts, the vitrimers network can achieve topological network rearrangement through dynamic transesterification, exhibiting excellent reprocessing performance. Moreover, the vitrimers exhibited faster stress relaxation (1500 s at 180 °C), lower activation energy (92.29 kJ·mol⁻¹) and the tensile strength of the recycled material reached almost 100% of the original sample. This work offers a new method for preparing cardanol-based epoxy vitrimers that be used to make coatings, hydrogels, biomaterials, adhesives, and commodity plastics in the future. Full article

The purpose of this study is to investigate the dynamic properties of new structures formed by combining carbon fiber and epoxy resin-based composite materials with SMA (shape memory alloy) “smart materials” in the form of NiTiNol wire. Such a combination will have an impact on the dynamics of the structure, especially in terms of stiffness controllability. Key mechanical parameters such as natural frequency and stiffness, as well as the effect of temperature, were determined through experimental studies. Full article

Films of a vitrimer based on the reaction between diglycidylether of bisphenol A and glutaric acid in the presence of 1-methylimidazole were processed using a solvent-based technique. The curing schedule was divided into two steps: first, a soluble linear polymer was formed through the reaction of the diacid and the diepoxide, and then the crosslinking was induced at a higher temperature via transesterification reactions. This epoxy–acid vitrimer was modified with multi-walled carbon nanotubes (MWCNTs) functionalized with β-hydroxyesters, produced by a robust and straightforward strategy based on a two-phase reaction between oxidized MWCNTs and phenylglycidylether. Nanocomposite vitrimer films were obtained by drop casting a dispersion of the functionalized MWCNTs in the linear polymer/cyclohexanone solution, followed by a thermal treatment. A high degree of dispersion of the carbon nanostructures was attained thanks to the β-hydroxyester functionalization when compared with oxidized MWCNTs. Nanocomposite films showed a significant photothermal effect (reaching 200 °C or above in 30 s) upon NIR light irradiation (850 nm) from a single LED (500 mW/cm²). The released heat was used to activate the shape memory effect and weld and heal the vitrimer matrix, proving the success of this easy strategy for the generation of remotely activated carbon-based vitrimer nanocomposites. Full article

Shape memory alloy (SMA) tufted composites have shown a significant improvement of the mechanical strength, fracture toughness, and delamination resistance of structural joints. This paper investigated the self-sensing functionality of SMA tufted carbon/epoxy composite T-joints to enable in situ strain monitoring for the detection of low-velocity impacts. Indeed, large deformations in the tufted composite due to impacts caused abrupt changes in electrical resistance of SMA filaments, which were used to trigger the detection system. An Arduino Mega controller was programmed to simultaneously extract and process real-time electrical resistance recordings from SMA tufts during impact tests conducted at 5 J and 10 J. Experimental results showed that the proposed SMA-enabled detection system can capture accurately the time of the impact and localise the delamination onset, thus demonstrating the truly multifunctional capabilities of proposed SMA tufted composites. Full article

With the continuous increase in human demand to improve aircraft performance, intelligent aircraft technologies have become a popular research field in recent years. Among them, the deformable skin structure has become one of the key technologies to achieve excellent and reliable performance. However, during the service, deformable skin structures may encounter problems such as surface impact and adhesion of droplets in rainy weather or surface icing in low-temperature environments, which can seriously affect the flight safety of the aircraft. One way to overcome these issues is to use superhydrophobic shape memory materials in the structure. In this regard, first, shape memory composites were prepared with shape memory epoxy resin as the matrix and carbon fiber orthogonal woven fabric as the reinforcement material. Superhydrophobic shape memory composites (SSMCs) were then obtained by casting the kirigami composite with superhydrophobic carbon nanotube–polydimethylsiloxane (CNT@PDMS) mixture, and the surface was processed by laser micromachining. Shape memory performance and surface wetting performance were determined by material testing methods. The results showed that the shape memory recovery rate can reach 85.11%, the surface is superhydrophobic, the average water contact angle is 156.9 ± 4.4°, and the average rolling angle is 3 ± 0.5°. The three-point bending test of the specimens with different kirigami cell configurations showed that the shape memory composite based on the rectangular structure has the best deformability with an aspect ratio of 0.4. From the droplet impact test, it was found that the impact speed of water droplets and the curvature of the surface can greatly affect the dynamic performance of water. This work is expected to be of significant research value and importance for developing functional deformable skin materials. Full article